Our fully automatic Feeder machine in combination with a pallet dispenser and an insertion robot (ABB) including automatic infeed and discharge conveyors has been specially developed for the infeed of many sizes of blanks (corrugated and solid cardboard) in a folding / gluing machine or punching / printing machine. Minimum setting times are required by actuators in combination with touchscreen operation.
This installation can be used with all well-known brands and ensures a significant increase ...
Multi-Gluer 2100CE - the compact, semi-automatic folder-gluer machine for:
- 3-point gluing
- straight-line gluing
-eCommerce (double-sided adhesive tape and RippaTape tear strip)
Your benefits at a glance:
- glues and folds longitudinal seam RCS and 3-point automatic sheets (crash lock)
- short set-up times
- reasonable pricing
- maintenance-free adhesive technology from Baumer hhs (low or high pressure system), cold PVA adhesive or Hotmelt
Mtokws
- Beckhoff controls with touch screen (multi...
The base for the folder gluer for boxes, envelopes, etc.
The machine is factory made by a Dutch company.
It was used to produce return postal receipts.
The machine has independent control, guide belts, lining, creasing module.
Control on inverters.
Pbkef
Electrical documentation included.
FORMAT 76x100
pocket wallet folder
very good condition,
New Meler hotmelt gluesystem with 2 guns and works warranty
Options:
1. Fidia Vetta final fold, reconditioned. with Vetta we have the possibility to offer a set of tools for production of crash lock boxes (3 point gluing)
2. Fidia Speedy tape applicator for double sided tape or tear tape
E0pbvdvme
we can organise installation and instruction
Size: 900 x 925mm
Equipments:
pre breaker rpre folder and kicker
Counter
double wall
Max. speed 400 m/min.
To glue 4 point electronic upper glueing system needed
3 point glueing
two upper glueing disks and one lower glueing disk
folding-carton glue machines
Speed 400m/ min
transport belt
Crashlock section
vibrator at feeder
Maximum Size 900 x 925mm
Length 14 m.
Power 380 V / 13 kW
lower disc gluing system left
Max. speed 370 m/min.
Material: 200-800 g/SM.
Minimum Size 60 x 70mm
Bn...
Folder Gluer Inramik Prospekt II
Nordson 4 pcs heads
Bug9naod3i
Hot glue
Control from the touch screen
Production year 2005.
A set of documents, a palette of small items.
Heidelberg Easygluer 100
Year : 2008
Substrate : Solid Board 200~600 gsm
Corrugated board: N-F-E Flute
Open blank width: 87~1.000mm
Blank length: 140~700 mm
Max Speed: 300 m/min
Straight line glueing unit only
NO Glue Guns with the press!!
M3ukzsy
Sale of Jagenberg Diana 105-2 due to company takeover.
Machine has a gluing unit and glue nozzles.
Machine is in good condition and ready for operation.
Immediately available.
Dismantling and transport must be taken over by the buyer.
Access with forklift and truck problem-free possible.
Bujqe3andg
Media 68 III
Year 2004
Jwu9lq
Electronic top gluing unit hhs with 2x hhs nozzles
1x disc bottom gluing unit
Longitudinal seam
3-point gluing possible.
Counter
Kicker
with Crash-lock bottom
lower gluing system (left)
nozzle gluing unit Nordson (2 nozzles)
Tkivgg0
belt delivery
Monitor-Controlling
Petratto Metro 78 -2.5, equipped with:
Friction feeder
Folding section 2.5 m length
Kit for envelopes low grammage
Kit for boxes with crash lock bottom
Bt77j3myk2
Folding pocket
Hotmelt system with 3 guns
Auto giro (90 degree turning)
Belt delivery table
Size: 650 x 1020 mm
Equipments:
Min. film size: 60 x 80 mm
Cardboard thickness: 200 - 400 g/SM
Max. paper size: 650 x 1020 mm
Corrugated paper thickness: 6 mm
Max. working speed: 10.000 sheets / hour
Bcngltlhik
Min. paper size: 140 x 140 mm
Film thickness: 0,05 - 0,2 mm
Max. film size: 300 x 410 mm
Ready for production- sheet folding machine from Horizon: AFC 744 AKT, 4 motorised buckles, 2 cross knifes, built 2008, with PAIB air system upgrade- no blowers needed, to be directly connected to central air system.
Iuysdhcvw
High pile pallet feeder, checked, calibrated and tested in very good condition - very well maintained.
Ca. 23 mio cycles on totaliser.
Can ship worldwide.
Prefeeder Fossaluzza J.
Bpxhshnu
Vacuum feeding section
N. 2 flexo printing units from the bottom
Double shaft aoutomatic slotter
Rotary dei cutter
Folder gluer
Valco electronic gluing device
Bizzozzero head stitcher
Counter ejectr from the top with shingling unit
Signode bundle wrapping machine
Max size 1130x3050 mm.
Para Speedy Pau pallettizer year 2000
Available August 2021
one glue point
Vuaj8e
cold glue
STC-Ref:G-671-2285
Horizon BQ-270 ,Year: 2005 ,Impressions: 261.388 Tsd.
format: 320x320
equipped:
- counter: 261.388
- Book block thickness max. 50mm min. 1mm mm
- -side gluing unit
- book thickness measuring device
- 1 clamps
- speed: 500 strokes/hour
- max: 320 x 310 mm min: 135 x 115 mm
- Cover: max. 660 x 320mm min. 240 x 135mm
Bssnrs3ua3
- 2019 overhauled by the factory
- overhauling value of approximately Euro 6000
Petratto Metro folder gluer
Cl2y7fo
extended version with extra rollertable of 2.0m
equipped for box production (3 point - crash lock bottom)
Nordson glue system
Configuration:
Pressing belt
Gluing with jet
Delivery
Wxyixkwkp
Easy-Gluer 2500 - the cost-efficient solution for longitudinal gluing. The Easy-Gluer 2500 is characterized by its especially easy handling, with short set up times and convenient working forming the base for its economic feasibility.
● For all common cold glue types
● Machine setting by a few handles
● Variable transport speed
● automatic start/stop function
● easy cleaning because of removable stainless steel tank
● Holder system for fi xing the cartons keeps the pile in shape
and restrain...
Vacuum feeding section
Bsqx9vcrbf
N. 3 flexo printing units from the top
Automatic slotter
Rotary die cutter
Folder gluer
Counter ejector from the bottom
Refurbihsed in 2015
Equipped with:
friction feeder;
Sy7l79htc
delivery table,
tipper plate;
3x bridge for support of tools;
hotmelt system;
Castaldini Prefeeder mod. CS
Sun feeding section
N. 4 flexo printing fix units from the top
Automatic double shaft slotter
Rotary die cutter
Folder gluer with multi T system
Valco electronic gluing unit
Martin Process Control
Emmepi bundle wrapping machine
Castaldini fully automatic pallettizer
Bogt70kir7
Available end 2021
Equipped with:
friction feeder;
delivery table;
tipper plate;
buckle plate
Sy7spzdly
3x bridge for support of tools;
hotmelt system
FORMAT 76x100
Unica unit: pocket wallet, sleeves etc. folder
Estro unit: capacity wallet folder
Robatech Concept hotmelt gluesystem with 2 guns
(MHGraphics is Fidia-dealer)
very good condition (full reconditioned), warranty 3 months on mech. parts
price includes installation and instruction (3 days) in European Community
transport Hotel etc. paid by customer
Jse3w3
price when new:Euro 185.000
options:
Mohandes friction feeder (straight line boxes)
Vetta final fold unit
Dokki cross fold unit ...
FORMAT 76x100
Unica folder for pocket wallets, CD/record sleeves, envelopes etc.
Estro Unit for capacity wallets/record sleeves
Machine in very good condition, reconditioned by Fidia specialist and partner company GBGraf.
Hotmelt gluesystem with 2 guns
warranty 3 months on parts
Hgaamlvy
price includes installation and instruction (3 days) in European Community
transport Hotel etc. paid by customer
price when new: Euro 185.000
option:
Mohandes friktionfeeder (straight line boxes etc.)
V...
Machine in very good condition, reconditioned
Zgaopewr
machine for production of pocket wallets, sleeves etc.
Format 52x 100cm
Flat pile feeder
Buckle plate folder
Plough folds l+r for glue flaps
Hot melt glue system
Optional with Fida Vetta final fold unit.
MHGraphics is Fidia dealer, we can offer installation/instruction
Machine in very good condition, reconditioned
machine for production of pocket wallets, sleeves etc.
Format 52x 100cm
Flat pile feeder
Buckle plate folder
Plough folds l+r for glue flaps
Hot melt glue system
J3hjfki0w
MHGraphics is Fidia dealer, we can offer installation/instruction
Machine in very good condition, reconditioned
machine for production of pocket wallets, sleeves etc.
J3hfjk9wj
Format 52x 100cm
Flat pile feeder
Buckle plate folder
Plough folds l+r for glue flaps
Hot melt glue system
MHGraphics is Fidia dealer, we can offer installation/instruction
width 56 cm
age 2006
automatic pocket setting
Corjzih
automatic roller setting
rotary feeder RFH
1. station: 6 folding pockets 56 cm
following knife shaft
noise absorbing hood
2. station: 4 folding pockets 56 cm
upstream knife shaft
following knife shaft
noise absorbing hood
window folding pocket
control unit ACC 2.4
vertical pile delivery VSA 66
- new rollers in unit 1
- new suction wheel
- new suction belt
Delivery time: immediately
2007 - Heidelberg Stahlfolder KH 82-4 KZR/L (Ref.No. 1000841)
Bkal0crwsr
Equipment:
- Motorized Combination Buckle Plates
- Automatic folding roller adjustment
- Machine Control System MCT
- Right-angle folding unit KZR/L 78
- Noise Hoods
- 1 st station - 4 buckle plates BUH 82.4
- Counter
- Round-pile feeder RFH 82
no pumps
continous feeder RFH
Gy9igqkbw
1. Station 6 buckle plates
rear slitter shaft
noise hood
2. Station 4 buckle plates
pre slitter shaft
double gate fold plate
controller ACC 2.4
VSA 66 delivery
automatic buckle plate adjustment
automatic folding roller adjustment
2019 Mitsubishi Mirage GLX 1.2L CVT
No Sales to NAFTA & Restricted Territories
Bty8s9gsoj
Additional Port Fees for $195
MILEAGE 18 Mi (29 Km)
ENGINE 1.2L I3
TRANSMISSION CVT Automatic
BODY STYLE Hatchbacks
DRIVELINE FWD
FUEL TYPE Gasoline/Petrol
RHD / LHD LHD
TITLE TYPE Export Documents
INCOTERMS Ex-Works
EMISSIONS Euro 5 equivalent
LOCATION Manzanillo, Panama
INTERIOR COLOR Black
EXTERIOR COLOR Gray
CYLINDERS 3 Cylinder
Specs:
Exterior Color: Titanium Gray
Interior: Premium Black Cloth S...
Full automatic
Ga07fiyme
strip width: 100 mm
strip thickness: 0,4 - 3 mm
No. of levelling rolls top/bottom: 4/3
No. of pinch rolls: 2
Byslqpfk
PRESS FARELL 150 TN FOR WOOL ... THIS PRESS MAKE SPECIAL MESURES BALES FOR EXPORT IN FCL... BALE MESURES 1170 X 720 X 1150MM WEIGHT BETWEEN 300/350 KG EACH IN CLEAN WOOL DEPENDS ON KIND OF WOL , HIGH PRODUCTION 900/1000 KG HOUR, WITH HIS OWN STORAGE FILTRED MATERIAL, FILTRET ACROSS A CONDENSER SPECIAL WHO DEDUST THE MATERIAL BEFORE GOES TO STAORAGE PRESS PLACE, AND WITH TRUTZSCHSLER AUTOMATIC FILTER FOR THE AIR ABSORBED BY THE CONDENSER.... REALLY GOOD AUTOMATIC INSTALLATION.
Bpoh98xw
Cevapcici automatic machine
Ewoxibc2
Capacity: 10.000 pc/h
Kap Saw Reinchardt NC 700 automatic
Manufacturer Reinchardt
Model / machine type NC 700
Year of production 1998
Machine category Kapła Kapowa
Location
Gorzów Wlkp.
Conditions of delivery
OWN RECEIPT
H8uf7cg
Cost of delivery
Customer cover
Start type
to be agreed
Description
Comments
CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT
straightening unit
sheet width (max) 350 mm
Q9shwhb7
sheet thickness (max) 10 mm
number of levelling rolls 5
diameter of levelling rolls 100 mm
distance of levelling rolls 77.5 mm
feeding rolls 2 x 2 pc.
with loop control
coil cradle
sheet width (max) 330 mm
max. outer diameter of coil 1300 mm
length appr.: 4900 mm
width appr.: 1820 mm
height appr.: 2030 mm
weight appr.: 2500 kg
strip width: 100 mm
Bs3vomstne
strip thickness: 0,4 - 3 mm
No. of levelling rolls top/bottom: 4/3
No. of pinch rolls: 2
Top beam rise & fall 50mm
Cbbrucyy
Bottom beam adjustment 25mm
Maximum length of bend 1250mm
Maximum material thickness 3mm
Back gauge Yes
Equipment Full length interchangeable fingers, 1 counter balance weight
Length 1650mm
Width 1000mm
Height 1700mm
Nett weight actual. 540 Kgs.
offer consist of:
MB Bäuerle fold unit CAS 52/4 DAT 24
storage battery - Pre-collector for Ply fold
Vtirmu
CAS 52/4 DAT 24
- without feeder
- without delivery
- roller condition: 5%
- roller new: 2.100€ + ball bearings
- 4 buckles
- installation: height manually adjustable
- usage: online and offline workable
We can also organize the following for you:
packaging, loading, transport ( by ship or plane) including customs
number of spindles:6
spindle passage:67 mm
Cam controlled multi spindle automatic lathe, used
6 main spindles with passage max. rated diameter 67mm
prepared for pick up for rear machining in pos. 6 (pick up optional)
threading clutches, stock stand and reel
coolant pump
[optional: cleaning and revising]
more pictures on request
optional customizing:
CNC upgrade with modern CNC compound slide(s) on cross positions
The machine could be visited under power.
The scope of delivery regarding the to...
The dimensions and bearing surfaces were drawn on the second/third Page.
Data:
- Dimension left shelf (small):
o Length: 7300 mm
o Width: 5900 mm
o Height: 3600 mm
o 11 Drawers
- Dimension right shelf (big):
o Length: 10800 mm
Hhuiv3wzo
o Width: 5900 mm
o Height: 3600 mm
o 19 Drawers
- Carrying capacity of support surfaces:
o 150 mm = 5 Tons
o 350 mm= 12 Tons
o 700 mm = 21 Tons
- The bearings can be used as one large bearing but also individually
- Automatic compact storage system for optiona...
10
manufacturer. Ergomat
Type: A 15 E
Year of construction: 2007
Spindle passage
Round: 15 mm
Hexagon: 13 mm
Square: 10 mm
N7qf2
max. distance between collet chuck and tailstock: 240 mm
turning length with long turning device: 70 mm
Minimum: 30 parts/hour
Maximum: 1500 parts/hour
Main engine power: 2.2 / 3.0 kW
max. speed : 6500 1/min
Travel path vertical slide: 22 mm
travel distance horizontal slide: 22 mm
Net weight: 560 kg
Dimensions without bar feeder: 1100 x 500 x 1560 mm
First put into operation July 2015.
Working hours (date 28th April 2021) 2.388 h
* NC control k-tronic
- Advantage: after the ZERO cut, exact positioning and length adjustment via
ballscrew
Machine can also be used in semi-automatic mode for single cuts
very easy operation and programming thanks to the new k-tronic control
* CoolTool
* hydr. sawband clamping
* chip conveyor
* 9 off new sawbands
* Roller conveyor, dimensions approx. 2000 x 400 x 800 mm
cutting diameter 220 mm
saw band dimens...
Saw blade diameter: 400 mm
cutting diameter: 70 mm
feed:: 17/34+14/18+11/22 m/min
total power requirement: ca. 2,0 kW
weight of the machine approx.: 910 kg
dimensions of machine: T:1,35xB:2,4xH:1,6 m
Under Floor Cold Circular Saw
- stop length max. 1100mm
equipment:
- coolant device
- swarf basin
S8uoy0qvn
- feed conveyor roll (L:6,2xW:0,9xH:1,0m)
- clamping vise hydraulic adjustable
- linear scale
accessories:
- saw blades
offer consists of:
Horizon AFC-492
2-buckles cross folder
- parallelfold rollers condition: %
- crossfold rollers condition: %
- rollers refurbished:
- numbers of buckles:
1. folding unit: 2 buckles + knife
- sheet size:
max. 490x650mm
min. 120x172mm (only Parallel fold)
min. 105x172mm (with special equipment)
min. 174x174mm (with cross fold)
- fold length: min. 58mm
Brhj9doopz
- paper weight: 40-250g/sqm
- pile height: 590mm
- speed: 180m/min
- power: 400V/50Hz, 3 phase three-phase ...
cutting diameter 320 mm
Rovdkfs
band length 4660 x 34 x 1,1 mm
cutting lenght max. 1100 mm
sawing motor 4,0 kW
weight of the machine ca. 2,6 t
range L-W-H 2,8 x 2,0 x 2,0 mm
used 2 coloumn automatic bandsaw
- chip conveyor
- coolant system
- Mitsubishi E 1032 control
- some bands
- 320 x 320 mm cutting area
- package clamping
The dimensions and bearing surfaces were drawn on the second/third Page.
Buw0kd3mff
Data:
- Dimension:
o Length: 8700 mm
o Width: 5900 mm
o Height: 3600 mm
o 15 Drawers
- Carrying capacity of support surface:
o 150 mm = 5 Tons
o 200 mm = 6 Tons
o 350 mm= 12 Tons
o 700 mm = 21 Tons
- The bearings can be used as one large bearing but also individually
- Automatic compact storage system for optional full integration of an automatic gantry loading system
- The L-frames are controlled via the gant...
Automatic drill, drill press, drill press, stand drill, pillar drill
-Automatic drilling machine with rotary indexing table for drilling flange and others
-spindle taper: MK4
-Transmission:
-Automatic drill with: rapid traverse
-Automatic drilling
Y2l98l
-Threading: automatic
-Table size: Ø 700 mm
-Projection: 450 mm
-Spindle stroke: 600 mm
-Speed: 55 - 1235 rpm
-Feed: stepless
-Drive: 2.2/3.5 kW
-Dimensions: 2280/1780/H3000 mm
-Weight: kg
Used Automatic folder gluer
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
How to receive 100% of our e-mails
Photo gallery: the 10 strongest forklift trucks in the world
Photo gallery: The World's 10 biggest excavators
Morlock Motors official partner of Machineseeker and Truckscout24
Sell now on Machineseeker! Over 220,000 inquiries per month
