Folder-gluer

DGM Technofold 1100 Gyro

Condition: used, Year of construction: 1988, BOBST Printing Machine with 4 bottom colors anilox cilinders 120l/cm and 80l/cm TRANSFER BOBST FLATBED DIE CUTTER BOBST AUTOPLATINE SPO 1600, max format 1100 mm x 1600 mm / 43.3" x 63" with 4 Bottom Printing unit and transfer Bobst * Vacuum feeder * Die cutting section * Waste elimination section * Centerline II * High pile delivery with two lifting tables * Max sheet format: 1100 mm x 1600 mm / 43.3" x 63" * Min sheet format: 520mm x 600mm / 20.5" x 23.6" * Cutting force: 400 t * Materials: E, B, C, CB, BE flutes * Max speed: 6,000 sheets/hour Ledpsv Ifpujfx Ahvori Possibility to sell them separately

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, overall weight: 52,000 kg, punching force: 600 t, space requirement height: 3,520 mm, space requirement length: 12,150 mm, space requirement width: 9,340 mm, Machine for punching, embossing, waste stripping and blanking Used machine, overhauled at the QTM Schwalmtal plant System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic punching, creasing and embossing with or without gripper edge ⦁ for stripping the inner waste as well as the side and rear sheet edges ⦁ for stacking the punched and stripped sheets with the attached gripper edges or the attached gripper edges or ⦁ for cutting off the gripper edges and then depositing the remaining sheets in stacks remaining sheets ⦁ with a patented gripper carriage register system for maximum register accuracy Ljdpfxot E Nthe Ahvori ⦁ with a bundle stacking machine that features a fully automatic separating sheet feeder and NON-STOP delivery and does not need to be converted even for the smallest blanks. changeover even the smallest cuts. (Shuttle table with comb structure) ⦁ Cut-off sheet magazine with electrical stock control, during production refillable during production ⦁ with Centerline equipment ⦁ with automatic pallet changing device in the storage area ⦁ Modem ⦁ Standard elevation of the machine 600 mm Specification Sheet format max. 1060 x 1450 mm Sheet format min. 500 x 700 mm Maximum punching force 6.0 MN (600t) Speed 8,000 Bg / h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/ Corrugated cardboard up to 5 mm (max. sheet curvature 4 %) Features: patented QTM rail system manual non-stop feeder stripping station depaneling station Centerline Fully automatic pallet changing device Deposit incl. platform Upgrade of the control system to Siemens S7 Completely overhauled machine drive Quick-clamping frame in all tool stations

Year of construction: 2004, operating hours: 37,800 h, condition: like new (used), functionality: fully functional, Top maintained high premium die cutter for fast setup and TOP quality jobs Technical data: Paper up to 70 gsm Cardboard up to 1000 gsm Corrugated board up to 2 mm Max. format: 1060 x 760 mm Min. format: 400 x 350 mm Press force: 260 t Speed up to 9,000 sheets/hour Equipment: Stripping station Optical register control Automatic pile alignment Ultrasonic double sheet control Centerline Microplate Plate 4 mm 2 closed frames Non-stop delivery Alignment table Height raised by 220 mm Lrodpfx Ahsyaq S Asvji

Condition: good (used), Year of construction: 2014, only approx. 150 million impressions Equipped with: CX Package Logistics – with manual non-stop feeder FAPC (Fully Automatic Plate Change) Preset Ergotronic control console WallScreen display Colortronic ink metering Varidamp Lateral, circumferential, diagonal register control Technotrans Beta c 220L (air-cooled) Lrjdpex Sdn Ajfx Ahvji Ink temperature control CleanTronic Synchro – roller / blanket / impression cylinder wash DriveTronic feeder SIS (Sensoric Infeed System) Non-stop feeder – manual, not fully automatic Non-stop delivery with roll-on device Raised on a plinth (420mm) Ink agitators (UV) EES (Energy Efficient System) CleanTronic simultaneous blanket & impression cylinder wash CleanTronic UV – dedicated position for UV wash inside cabinet UV interdeck – 6 x UV cassettes, installable at any position UV interdeck – positions available at all 6 print units, drying towers, and 3 positions in the delivery Coating unit 1: Harris & Bruno aqueous and UV coating pumps with prep tanks (heated) Drying tower 1: VariDry IR/Hot Air dryer (plus interdeck position) Drying tower 2: VariDry IR/Hot Air dryer (plus interdeck position) Coating unit 2: Harris & Bruno aqueous and UV coating pumps with prep tanks (heated) DriveTronic SFC (Simultaneous Form Change) at coating units KBA VariDry IR/Hot Air/UV at end of press ALV3 extended delivery

Condition: good (used), Year of construction: 2000, operating hours: 23,000 h, Bobst SP 142 CER II Lrjdpjxxypyefx Ahvji

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Ledpfx Aet H Nhhehvori Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: new, Year of construction: 2025, Available immediately in stock in Europe Infrared safety device Automatic oil pump Lrjdpfxsu Uzb Us Ahvsi High-Quality Performance: The TYMB 1040 machine is designed for commercial use, featuring a gross power of 19kw and a flat bed printer plate type, ensuring efficient and precise printing results. Multi-Functional Capabilities: This machine can be used for various applications, including paper printing, label printing, card printing, and tube printing, catering to diverse user needs. Competitive Price: As a new product with a competitive price, the TYMB 1040 offers an excellent value proposition for businesses looking to upgrade their printing capabilities without breaking the bank. CE Certification and After-Sales Support: The machine is CE certified and comes with engineers available to service machinery overseas, providing users with peace of mind and reliable after-sales support. Durable Construction: With a weight of 5t and dimensions of 2250x2200x2000mm, Show less

Condition: good (used), Year of construction: 2004, Folding Carton Gluing Machine Formats: max. 1000 x 600 mm min. 126 x 60 mm - Straight-line version for longitudinal seam (straight-line) cartons, crash-lock bottom cartons, and 4-corner cartons - Feeder with vibration - Pre-breaking units - Left-side lower disc gluing system - Folding modules - Crash-lock (patent bottom) module - Electronic upper gluing system KAS C-800-Compact - 4 glue nozzles - Up to 5 gluing points - Unit with 2 forming stations Lsdpjx R Thisfx Ahvsri - Pneumatically operated press belt and delivery section - CUBE central control system with display

Condition: like new (used), Year of construction: 2016, operating hours: 100 h, functionality: fully functional, Kohman Starlet 620 Straight line folder gluer to sale. The Machine is new, only tested never used in production. Ljdpexyw H Sefx Ahvjri

Condition: good (used), functionality: fully functional, machine/vehicle number: 057400108, Manufacturer: Bobst, Switzerland Model: SP 142 Lredpfxsw Rb Ebe Ahvji Machine Category: Die Cutting Machine Machine Type: Autoplaten Year of Manufacture: --- (not specified) Machine Number: 057400108 Technical Specifications: - Max. Sheet Size: 1420 x 1020 mm - Min. Sheet Size: 700 x 500 mm - Speed: up to 4,500 sheets/hour (depending on job) - Power Supply: 380 V, 50 Hz Features: - Robust Swiss design - Mechanical control with side operator console - Pile feeder and delivery for continuous operation - Suitable for cartonboard and corrugated board - Proven model for packaging production