Automatic feeder buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbu8dcgept DUBOIS AUTOMATIC PANEL FEEDER: -- Specifications:97" Length capacity, 49" width capacity, 1/2" min. thickness, 3" max. thickness, 36 lb max sheet weight, 60" max. stack height (with pallet), 35 FPM max line speed. (2) Southworth X-lifts: 2000# capacity, 48" x 96" table & 3 HP hyd. pack. -- Pin lift gantry: 45" x 92", 168" belt driven track , 3 HP motor. The lift system was converted from a vacuum lift to a pin lift system (1500 CFM NY blower & ... more
3
9wssfbm BAR LENGTH: 3000 mm BAR DIAMETER: 42 mm WEIGHT: 1250 Kg PRICE: On demand more
3
Bbrghqjofn For processing pelagic fish / Infeeder to fileting/nobbing machine Size range: 20-40 cm Capacity: 150-200 fish/min Power consumption: 2,2 kW Water consumption: approx. 8 l/min Dimensions (LxWxH): 2,90 x 1,10 x 1,70 m more
2
We have for sale sewing machine Smyth with automatic feeder Year: 1984 Cpjon20c Size max.: 350mm - 260 mm Size min.: 100mm - 80mm With computer Automatic feeder Speed: 1500 cycle/hour Location : Gdansk , Poland Available immediately more
6

Automatic with feeder Rambomat

D - Rheinland-PfalzGermany dealership location
6457 km
used
Ramomat lathe hydraulic clamping Collet clamping over 45 mm controlled, Kewvohlr possible. With Icema Stangenmagezin AS 325/32 approx. 4, 5 m long. Accessories Machine dismantled and stored can be not presented. The machine is little used condition but in a very good and funtionierte to bearings some time ago. Sightseeing in 56659 Burgbrohl by arrangement at any time. Free loading with a forklift and crane car more
6
Full automatic saw for pipes and bars: up to 80mm Manufacturer: ADIGE sala Type: TT640 Year of manufacturing: 1995 Complete set with bar feeder and Deburring machine: Manufacturer: ADIGE sala Ersoed3ve Type: ST660 If you have questions please don't hesitate to ask. Best regards, Bram van Summeren Second Owner more
3

automatic feeder ISEL

ErbachGermany dealership location
6606 km
2011
used
Traverse, X-axis: 625mm, Y-axis: 600mm Z axis: 170mm, Thickness: 300mm, Table height: 900mm without sliding door was installed on a SCHÜTTE multi-spindle turning machine for the automatic feeding and removal of production parts. Original price € 17,000. Can be adapted to any milling or turning center. Bi73c0tl more
1
BAR LENGTH: 3000 mm Gu9w2k BAR DIAMETER: 52 mm PRICE: On demand more
2
Automatic bar loader IEMCA MASTER 880P for bars up to 80mm to 3.200mm diemeter complete with guides and spears up to 65mm. Year built 1999, "CE" mark. 7epphh9av Hydraulic bar feeder Asmut AB6 - diameters bar step 15-22-29-36-43-52mm automatic bar loader LNS MINI SPRINT for bars up to 33mm diameter. Year Built 1995 sellable machines individually or in stock more
1
MOTOR POWER aprox 0.24 HP-0.18 Kw FEEDING SPEED (m/min) 4-8-9-18 Vvhuyu2h N. Rullers 3 Diameter of rollers 80 width of rullers 28 spring way of rollers 15 mm net weight 53 Kg more


automatic ...
every day

New machines via email!

Be informed!
5

automatic feeder ISEL

ErbachGermany dealership location
6606 km
2011
used
Traverse, X-axis: 625mm, Y-axis: 600mm, Z axis: 170mm, Thickness: 300mm, Table height: 900mm without sliding door was installed on a SCHÜTTE multi-spindle turning machine for the automatic feeding and removal of production parts. Original price € 17,000. Can be adapted to any milling or turning center. Bixt0eow more
1
BAR LENGTH: 3400 mm BAR DIAMETER: 20 mm WEIGHT: 1080 Kg OVERALL DIMENSIONS: 5000 x 600 x 1280 mm PRICE: On demand Ceg0jitm more
4
97xgmuj03 BAR LENGTH: 3300 mm BAR DIAMETER: 5-65 mm WEIGHT: 1400 Kg PRICE: On demand more
2
BAR LENGTH: 4300 mm BAR DIAMETER: 5-65 mm Bfjmtk2u WEIGHT: 1950 Kg PRICE: On demand more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bbvssnpyak H. KALLESOE K 12 EL Case Clamp: -- Specifications:Working length 27.5" - 88.5" (700 - 2,250 mm); working height 11.8" - 49.2" (300 - 1,250 mm); working width 25.5" (650 mm). -- Vertical & Horizontal Pressure Beams:Vertical & horizontal pressure beams are adjusted by means of (3) 220 v, 3 phase motors w/automatic locking; includes a total of (5) clamps with (2) pressure cylinders per clamp; each cylinder 4" (100 mm) dia with a 3.5" (90 mm) stro... more
15
ITEM MODEL: Sotax HT100 Automatic Tablet Testing System; this item is a current model offered by the manufacturer Sotax. CONDITION: This system was last used by a nutrition supplements manufacturer. Operational Qualification (OQ) was last completed and passed in April 2016. Bbpgrr9k DESCRIPTION: The Sotax HT100 Tablet Hardness Tester is capable of performing fully automated testing of 10 different batches of tablets. It can test 5 essential physical parameters including: Hardness, Thickn... more
8
-----MACHINE ONLY AVAILABLE TO END USER CUSTOMER----- 2003 MACHINE, 500MM EXTERNAL GRINDING WHEEL FOR STRAIGHT OR ANGLE APPROACH GRINDING + INTERNAL SPINDLE WITH FREQUENCY CONVERTOR, AUTOMATIC REBUILT “B” AXIS WITH 1 DEGREE, FANUC 21i CNC WITH EASY PICTOGRAM PROGRAMMING, SENSITRON, LENGTH POSITIONING, REBUILT WORKHEAD AND TAILSTOCK BY STUDER AG FACTORY, 1000MM CENTRE DISTANCE x 175MM CENTRE HEIGHT, ***GRANITAN BASE *** ***** INSTALLATION - STUDER CNC OPERATOR TRAINING - CYLIND... more
5
saw blade diameter:400 mm cutting diameter:130 mm stroke:150 mm capacity 90 degrees: square:115 mm feeds hydraulic /stepless:0 - 1,5 m/min engine output:2,0 / 2,6 kW saw blade turning speeds:10 + 20 U/min total power requirement:12 A Bu2mipxl dimensions of the machine ca.:1,5 x 1,1 x 1,85 m weight of the machine ca.:1,1 t more
1

automatic bandsaw KASTO Win A3.3

Hermann-Funk Strasse 10, 28309 Bremen, DEGermany
6440 km
2016
good condition (used)
full options Bb308wktmc more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Copwe7h Custom Built Cold Material Feed Bin System with the following Components and Features: -- (2) Bins. -- Each Bin is fitted with 24”x 5’ Variable Speed Feeders with 10 HP AC Motors. (not shown in the photo). -- 30” Wide Collecting Belt Conveyor (Not shown in the photo. No Head or Tail Pulleys included). -- Note: The (2) Bins are connected at the center. more
6

Punching Automatic - Single Column SIBIU PAR 25 A

Bünde bei BielefeldGermany dealership location
6460 km
1975
used
pressure 25 t sheet width 250 mm throat 210 mm stroke 10-100 mm table-size 560 x 400 mm double strokes/min. 180 Stück table adjustment - upper 190 mm total power requirement 3 kW weight of the machine ca. 2,25 t dimensions of the machine ca. 1,1 x 1,4 x 2,33 m Condition: ready for operation Double-column eccentric press with transverse shaft, wheel guard, 9zsruzhbz electro-pneumatic drive, adjustable stroke and ram, adjustable table. Roller feed: band feed length 0-125 mm, max. Band thickn... more
6

automatic band saw BEHRINGER HBM 540 A

Postfach 2722, 58477 Lüdenscheid, DEGermany
6444 km
2004
good (used)
- cutting range at 90°: round 540 mm square 630 x 540 mm - saw band dimensions: ca. 7500 x 54 x 1,6 mm - cutting speed stepless adjustable: 18 -1 00 m/min H2nh78qt - cutting pressure stepless adjustable: 0 - 10 m/min - hydraulic workpiece clamping - automatic workpiece feed with parameter: length, quantity, multiple stroke - feeding length single stroke: max. ca. 500 mm - preselection of the stroke height of the saw band - micro spraying coolant device - duplex chips brush ... more
5

Cold Circular Sawing - Automatic EISELE VA II H

ab Lager Monheim am RheinGermany dealership location
6405 km
1987
used
saw blade diameter 450 mm B2ov33oa cutting diameter 10-160 mm stroke mm feed stepless 0-18 mm/sec total power requirement 7 kW weight of the machine ca. 2 t dimensions of the machine ca. m Cutting lengths can be set from 5 to 1,200mm Sawblade feed, infinitely variable 0 - 18mm/sec Material feed speed 10 - 300mm/sec Accessories / Special Features: - Built-in coolant equipment. - Infinitely variable settings of feeds, hydraulic. - Complete Covering more
6

Automatic Haubenschrumpfmaschine Minipack FM 76

Raiffeisenstraße 21, 71364 Winnenden, DEGermany
6670 km
ready for operation (used)
Professional packing machine of a renowned European manufacturer: Cnq2lotu -Automatic reduction in hood and hood opening. -Automatic off conveyor belt for the packaged products. Conveyor belt with infinitely adjustable spindle. Needle perforation through 3 adjustable needle rings. Selector switch for welding and welding / heat-shrink. -Thermoregulators for shrink temperature can be continuously adjusted. Installation time can be continuously adjusted. Transport time of the conveyor be... more
5

automatic bandsaw BEHRINGER HBP 413 A KGT

Hermann-Funk Strasse 10, 28309 Bremen, DEGermany
6440 km
2004
good (used)
full options Gtxh0we28 more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cpcyqfj CEDAR RAPIDS Portable Cold Material Feed Bin System with the following Components and Features: -- (4) 8' x 10' Feed Bins with Bin Dividers. -- 8'x 24” Belt Feeders with 5 HP DC Motors, -- 30"x 50' Collecting Belt Conveyor. -- Frame Fitted with (2) Axles (No Wheels or Tires). more
2
workpiece dia. Ø 24 mm workpiece feed -automatic 75 mm Srnyhk thread dia. 30 mm turning speed range - spindle 27 - 3750 U/min tool turret 8 Plätze max. travel of the tool turret 70 mm total power requirement 5,5 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,10 x 0,85 x 1,50 m with 2 cross and 2 parting-off slides, with thread chaser device and multi edge turning device acc.: bar loading magazine IEMCA AS 325/32, various change gears more
6
cutting diameter: 455 mm saw band length: 4120 mm Gfusvwh saw band width: 55 mm table height: 600 mm square: bei 90°: 455 mm electrical connection: 380 / 50 V / Hz. total power requirement: 7,9 kW weight of the machine ca.: 3,2 t space requirements of the machine approx.: L:3,8xB:2,3xH:2,1 m fully automatic 2 column bandsaw bandsaw speed: 16-35;35-60;60-80;80-100 m/min cutting feed adjustable worpiece clamping hydraulic worpiece feed automatic equipment: roll conveyor, coolant device, swarf con... more
6
Professional packaging machine of a renowned manufacturer of tape width of 50 mm. maximum dimensions: width 550 mm x height 625 mm; length unlimited. By changing the default setting, cardboard can be processed up to 725 mm height. Ba0wv77bta Description: -No settings for different carton formats required. -Double-sided cap on top and bottom, as well as transport drive up and down. -Different leg lengths of tape on the side of the package can be adjusted. Pressure can be adjusted ... more
3
saw blade diameter 200 mm cutting diameter 50 mm stroke 70 mm total power requirement 3,00 kW weight of the machine ca. 1,00 t Qmbys7woa dimensions of the machine ca. 1,00 x 1,00 x H1,80 m more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbu7ntrpnl Portable Cold Material Feed Bin System manufactured by BARBER-GREENE with the following Components and Features: -- (3) 8' x 8' material Feed Bins with Bin Extenders. -- Each Bin fitted with 24" Variable Speed Feeders that are set up for 3 HP [...] Motors with DODGE Reducers but NO MOTORS are included. -- 24"Collecting Belt Conveyor with Drive Motor and Reducer with 5’ Discharge “Stinger” Section at the end. -- More photos to... more
3

Chucking Automatic Lathe-Single Spindle HESTIKA HM 26

D - 77815 Bühl-WeitenungGermany dealership location
6593 km
1966
used
bore diameter 26 mm swing diameter 140 mm DIN 52022 Gr. 4 spindle diameter in front bearing 55 mm work height max. 1050 mm turning speed range 205 - 3280 U/min rapid speed 2 m/min feed speeds infinitely variable 0 - 1200 mm/min number of slides 3 total power requirement 3,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,80 x 1,00 x 1,60 m Uqvqibp7u stepped drive, with autom. electro-magnetic speed control for drive with 3 slides, with electrohydr. control acc.: variou... more
4
turning diameter over bed: 32 mm spindle passage: 60 mm S8zdzgnvb turning length: 45 mm revolution per minute: [...] (spindle) U/min rotary speed of motor: 1450 U/min total power requirement: 5,5 kW weight of the machine ca.: 2,4 t space requirement of the machine approx.: L:2,0x1,0x1,8 m cam-controlled automatic lathes There are 4 machines on sale (3x C29 and 1 x B60) We are offering these machines per single item, but on request as a package. accessoires are available on request. max. travel... more
2

Barfeeder Fedek (LNS Taiwan) Quicker 542

ZevenbergenNetherlands dealership location
6233 km
2000
good (used)
Yffhx0s Maximum bar length 3200 mm . Bar diameter 5-42 mm. Feeding left from machine more
5
BIGLIA B42 S2M CONTROL FANUC OTT-C MAIN SPINDLE CHUCK SIZE B42 mm COLLECTS SUB MAIN SPINDLE CHUCK SIZE B42 mm COLLECTS MAIN SPINDLE NOSE ASA 5 MAX DISTANCE BETWEEN SPINDLES 560 mm MAIN SPINDLE MAX TUN DIAMETER 299 mm SUB MAIN SPINDLE MAX TUN DIAMETER 150 mm MAX BAR CAPACITY 42 mm MAIN SPINDLE SPEEDS 100-5,000 RPM MAIN SPINDLE ORIENTATION C-AXIS (.001 DEGREE) SUB MAIN SPINDLE ORIENTATION Bb3ynkztpr TURRET 1 CAPACITY 12 STATIONS TURRET 2 CAPACITY 12 STATIONS TURRET 1 TRAVELS X/Z U... more
1

Router + feeder Bäuerle SFM

Nordrhein-Westfalen, DeutschlandGermany
6437 km
1981
ready for operation (used)
Router + feeder SMA-REF-6246 Type: spindle non-tilting Cw72qh7g 30 + 40 mm 2.800 - 12.000 rpm right/left operating 5,5 kW Features: MEC feeder Table extension Condition: ready for action under power Location: Western Germany Availability: on demand Terms of delivery: ex works free on truck Terms of payment: 100% before dismantling/loading more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Ssz0jg Custom Built Cold Material Feed Bin System with the following additional features:, -- (4) 10' x 12' Feed Bins. -- Electric Gates. -- Each Bin fitted with a Grizzly. -- 10'x 30" Variable Speed Belt Feeders with 5 HP DC Drives and DODGE Reducers. -- No-Flow Detector Switches and Tachometers on each Bin. -- Bin Extenders. -- 24" Walkway along Bin Tops. -- All bins are relined with Steel. -- 30"x 48' Belt Collecting Conveyor. -- Feed with a fro... more
1

Chucking Automatic Lathe-Single Spindle BOLEY BDA-H

D - 77815 Bühl-WeitenungGermany dealership location
6593 km
1981
used
turning diameter ca. 100 mm turning length 100 mm number of slides 2 spindle hollow 42 mm face slide travel 55 mm Uqvp8qkjt turning speed range max. 5000 U/min greates pass round over bed 240 mm feed speeds 20 - 400 mm/min rapid speed 6 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t range L-W-H 2,80 x 1,20 x 2,00 m with connector field control more
6
pressure: 30 t stroke: ca./approx. 20 mm strokes per minute: 200 - 1200 H/min Table surface area useable: B:350xH:330 mm ram adjustment: max. 50 (manual) mm ram surface area: 450x250 mm adjustment of stroke: keine / no stroke adj. mm dayligth: 400 mm total power requirement: 7,5 kW S8wtki8ut weight of the machine ca.: 3,6 t transport dimensions LxWxH: 2,3x1,6x2,7 m automatic punching press-4 column mechanic transportation dimensions incl. electric cabinet [...] more
3

Bar feeder Hydrafeed Multifeed 3-80

ZevenbergenNetherlands dealership location
6233 km
1999
good (used)
L2yxvrk Short with magazine rod feeder. capacity and type of rods: round rods 3-80 mm. Length of rods (depending) 1325 mm. Height of lathe centre line 700-1500 mm. more
3
cutting diameter 230 mm Hrxjh2hd saw band length 2710 mm cutting width 225 x 225 mm dimensions of saw-band 2710 x 0,9 x 25/27 mm mitter cutting 45 ° cutting speed 28 / 56 m/min power capacity 0,85 / 1,2 kW coolant voltage 400 V total power requirement 1,3 kW weight of the machine ca. 475 kg more
15
 Start Chat

1 knife holder for cutting machines Tidland Performance 2 Automatic 128401 A5

Leipziger Straße 32, 06108 Halle, DEGermany
6705 km
good (used)
We offer: from the stock Geschalts-/ bearing resolution Knife holder for cutting machines Tidland performance 2 automatic 128401 A5 SP/20110492 525761-C -Modular mounting options allow for retrofitting in all machines
 User friendly function
 -Automatic "half-stroke function" to adjust the correct page pressure between the upper and lower knife rings
 -Optional pneumatic locking bracket pinion and cross button
 -By durable materials for rough industrial environments 
Air-flush... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbu7ih3kez Portable Cold Material Feed Bin System manufactured by STANDARD STEEL with the following Components and Features: -- (4) 8' x 12' material Feed Bins. -- Electric Gates. -- Each Bin fitted with a Grizzly. -- Each Bin fitted with 5'x 20" Variable Speed Belt Feeder with 5 HP DC Drive and FAULK Reducer, -- No-Flow Detector Switches and Tachometers on each Bin. -- 24"x 55' Collecting Belt Conveyor with 15’ Foldable Discharge “Stinger&... more
6
table diameter 500 mm table load 0 t table height 310 mm 992flzmg8 weight of the machine ca. 0,5 t dimensions of the machine ca. 1x0,6x0,6 m more
6
pressure: 30 t ram surface area: 450x250 mm ram adjustment: max. 50 (manual) mm dayligth: 400 mm Table surface area useable: B:350xH:330 mm strokes per minute: 200 - 1200 adjustment of stroke: keine / no stroke adj. mm F3wx3mz stroke: ca./approx. 20 mm mm total power requirement: 7,5 kW weight of the machine ca.: 3,6 t transport dimensions LxWxH: 2,3x1,6x2,7 m automatic punching press-4 column mechanic transportation dimensions incl. electric cabinet [...] more

single spindle automatic lathe Traub A 20

Max-Planck-Straße, 58840 Plettenberg, DeutschlandGermany
6458 km
1995
good (used)
Bbz9vfud7x more
5
- bar diameter 5-52 mm - max. bar length: 3200 mm - bar capacity: 11 Bby7qa2h2d - portable control panel - guide bushes D 37 and D 52 - dimensions LxWxH: 4150 x 900 x 1400 mm more
4
cutting diameter 200 mm band length 350 mm cutting lenght max. 600 mm cutting range max. 180 x 180 mm dimensions of saw-blade 350 x 35 x 2 mm no. of strokes 52/66/81/104/132/162 Hub/min coolant Dkdve9sp8 voltage 380 V total power requirement 3,0 kW weight of the machine ca. 470 kg more


automatic ...
every day

New machines via email!

Be informed!

to

to

Change search
AUTOMATIC FEEDER
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,49 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close