Used Automatic L Sealer for sale (36,137)

Condition: ready for operation (used), Year of construction: 2015, Packaging capacity: 60/min, max. product width: 450mm, max. product height: 200mm, conveyor speed: 8m-30m/min, film thickness range: 10µm-80µm, max. temperature: 170°C, total output: 25kW. Machine dimensions X/Y/Z: approx. 4000mm/2400mm/1800mm, weight: approx. 1500kg, control: Delta. Documentation available. On-site inspection is possible. Hfodpfsudm A Asx Afkob

Condition: ready for operation (used), Year of construction: 2017, Welding dimensions: 1170x900mm, max. product height: 200mm, film: PO, PE and PVC, half-tube film, max. film roll dimensions: 1050x250mm, connected load: 23KW, length: 2640mm, width: 2850mm, height: 1220mm, weight: 600kg. Comes with documentation, shrink tunnel, two conveyor belts and film. The machine has been used very little, only ran for a few hours. An on-site inspection is possible, the machine is immediately available. Hfjdpfx Afjw Rqv Ajksb

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, controller model: Cincom Mitsubishi Meldas, counter spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Bar diameter max.: 20 mm Hfjdpfxox U Afxe Afksb Turning length max.: 205 mm Main spindle speed max.: 10,000 rpm C-axis (main spindle): 0.001 degree Counter spindle speed max.: 10,000 rpm C-axis (counter spindle): 0.001 degree Tool capacity: 18 tools Axes: 7 MACHINE DETAILS Control: Cincom Mitsubishi Meldas Dimensions & Weight Machine dimensions (LxWxH): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Bar feeder dimensions (LxWxH): 3,900 x 900 x 1,450 mm Bar feeder weight: 850 kg EQUIPMENT Parts conveyor belt Bar feeder FMB Turbo 3-26

Condition: used, Year of construction: 2006, Manufacturer: Robopac Model : Athena 5545 / Combi Year: 2006   Type : Automatic L-shaped shrink-wrapper and shrink tunnel Dimensions of sealing bar : 550 x 450 mm Sealing dimensions : 500 x 350 mm Minimum product size : 50 x 50 x 20 mm Maximum product height : 120 mm Film reel width: 600 mm Inverter-controlled conveyor belt speed: 10 – 40 m/min Production capacity: 30-35 packs/minute (depending on product dimensions and shrink film specifications) Power : 11 KW   Machine in operation: ?v=XY4arSTWZSs Hfsdex R Dd Uspfx Afkjb

Condition: excellent (used), functionality: fully functional, mileage: 781,280 km, power: 130 kW (176.75 HP), first registration: 05/2016, fuel type: diesel, overall weight: 11,990 kg, tire size: 245/70 R17,5, axle configuration: 4x2, wheelbase: 5,360 mm, fuel: diesel, brakes: engine braking, color: blue, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 8,080 mm, loading space width: 2,490 mm, loading space height: 2,190 mm, Equipment: ABS, AdBlue, EBS, additional headlights, cruise control, electric window regulation, electronic stability program (ESP), hill-start assist, lane keeping assist, onboard computer, power assisted steering, power mirror, seat heater, second fuel tank, soot filter, spoiler, tachograph, tail-lift, traction control, Mercedes-Benz Atego 1218 L Box Body with Tail Lift Engine: OM934, inline 4-cylinder, 5.1 L, 130 kW (177 HP), 750 Nm Engine type: Euro VI, Version 2 Mercedes PowerShift 3 automatic transmission High Performance Engine Brake Leaf/Air suspension Air suspension, rear axle Cruise control Electronic braking system with ABS and ASR Electronic Stability Program (ESP) Active Brake Assist Lane Keeping Assist Hill Start Assist Daytime running lights Rain/light sensor Hjdpfx Afex S E D Sekefb Radio Electric windows, both sides Comfort driver's air-sprung seat S-Driver Cab ClassicSpace, 2.30 m, tunnel Roof hatch Plastic fuel tank 180 L, left Second plastic tanks 2 x 100 L, left AdBlue® tank 35 L Dautel tail lift 1,000 kg Wheelbase 5360 mm Cargo area dimensions: L 8.08m | W 2.49m | H 2.19m Tyres: 245/70 R 19.5 Tread depth 1st axle: 12 mm; 2nd axle: 11 mm

Year of construction: 2007, condition: good (used), Specifications Manufacturer: Variovac Model: Rotarius VG Year: 2007 Condition: Used Serial Number: 052.07 Stock Number: 1377 Type of Machine: Tray sealer Capacity: 4 to 8 cycles/min Motor: 7 kW - 230/400 V - 13 A - 50 Hz - 3 Phase Total dimensions: 135 x 120 x 160 cm Weight: 490 kg Hfodpfx Aox Rhayefkeb

Condition: good (used), Year of construction: 1994, Automatic defect cross-cut system Wood width max. 260 mm Wood height max. 100 mm Hfodpokv Untsfx Afksb Saw 7.5 kW Feed 6 kW worked 1995 - 2012 approx. 4 hours/day

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 16380, CNC automatic lathe CITIZEN CINCOM L-20 VIII with Fedek STM-326 bar feeder, year 2008. Machine is fully controlled by Citizen. Supplied with geometric protocol. Hfsdpfx Afow T Stzoksb

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, controller model: Cincom Mitsubishi Meldas, counter spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Hfjdpfjx U Ad Usx Afksb Max. bar diameter: 20 mm Max. turning length: 205 mm Max. main spindle speed: 10,000 rpm Main spindle C-axis: 0.001 degrees Max. sub spindle speed: 10,000 rpm Sub spindle C-axis: 0.001 degrees Tool capacity: 18 tools Number of axes: 7 MACHINE DETAILS Control: Cincom Mitsubishi Meldas Dimensions & Weight Machine dimensions (LxWxH): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Bar feeder dimensions (LxWxH): 3,900 x 900 x 1,450 mm Bar feeder weight: 850 kg EQUIPMENT Parts conveyor FMB Turbo 3-26 bar feeder

Condition: used, CITIZEN CINCOM L 20 VIII is a CNC automatic lathe, engineered for precision, high accuracy and reliability. Capacities: 2 spindles, max turning diameter 20 mm, max turning length 200 mm; spindle speeds 200–8000 t/min, back spindle 200–6000 t/min. Specifications: tool-holder 3 positions with 12 tools (5 turning, 3 drilling, 4 transverse), spindle motor 3.7 kW, back spindle power 1.5 kW, voltage 3x380 V 50 Hz, weight ≈2150 kg, dimensions 2050×1085×1800 mm. Accessory: bar feeder IEMCA BOSS 332 (2006). Delivers tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Hjdpfxexx U E Nj Afkefb

Condition: used, functionality: fully functional, Haldibipack Espert 5040 L-sealer Brand: Haldibipack Model: Espert ES 5040 2 N Required power: 220/380 Volt Machine weight: 270 kg Internal article number: 2025120106 Collection address: Industriestraße 5 (47918 Tönisvorst) The machine was in operation until dismantling. Tailored solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic systems for loading and unloading your goods, as well as packaging machines, we are your competent partner! We are happy to prepare a customised offer or advise you on planning or installation-related questions. Simply let us know your requirements and site conditions. Benefit from our many years of experience and our excellent network of specialists. We have already successfully completed projects for companies from a wide range of industries, such as logistics, the pharmaceutical industry, skilled trades, or the electronics sector. Hedpfjx Ak Iujx Afkofb Together, we will develop solutions to optimise your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting systems or supplementary components such as order picking shelves or containers.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning length: 320 mm, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, spindle bore: 39 mm, controller model: Mitsubishi Meldas, TECHNICAL DETAILS Hsdsxxlkpjpfx Afkjfb Maximum machining diameter: 32 mm Maximum machining length per clamping: 320 mm Main spindle speed: 8,000 rpm Spindle bore: 39 mm Sub spindle (rear-side spindle): 32 mm Max. frontal milling/drilling: 12 mm Max. frontal thread cutting: M12 Tool capacity: 30 tools Number of axes: 7 MACHINE DETAILS Control: Mitsubishi Meldas Connected load: 10 kW Dimensions & Weight Dimensions (L x W): 2,800 mm × 1,240 mm Machine weight: 2,800–2,900 kg EQUIPMENT High-pressure coolant system Fire suppression system Chip conveyor Parts catcher Parts conveyor belt 4 driven tool holders Standard tool holders

Year of construction: 2008, condition: good (used), Item: M-07196-Ishida Tray Sealer Hedpjh Dbwiefx Afkofb Ishida - Automatic High Speed Tray Sealer Serie QX-775 R Year of production 2008 Specification: Machine model QX775, Tray Sealer Suitable for 5 impression tool 40 mm gate Options vac gas/gas flushing Electrical requirements: 3 phase 415 V, 4500 VA Pneumatic Supply: 8 bar, 650 nominal l/min Weight: 830 kg Incl. Tray dispenser & tool trolley

Year of construction: 1988, condition: good (used), Bucket sealer Make: Soft Electronic Systems Type: Semi-automatic bucket sealer Model: PMS 2 GH Capacity: Up to 300 buckets per hour Frame: Stainless steel Range: Buckets up to D = 300mm Dimensions: L x B x H = 1.000 x 900 x 1.000 mm Weight: 150 Kg Power supply: 380 Volt – 50 Hz – 1,5 kW Comp. Air: > 5.5 Bar Features: manually positioning of bucket Hsdpeigyp Hefx Afkefb automatic seal process (adjustable time) automatic sliding towards cutting device automatic pushing and rotating knife manually reeling up the film manually removing of bucket

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, controller model: Cincom Mitsubishi Meldas, counter spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Bar diameter max.: 20 mm Turning length max.: 205 mm Main spindle speed max.: 10,000 rpm C-axis (main spindle): 0.001 degree Counter spindle speed max.: 10,000 rpm C-axis (counter spindle): 0.001 degree Tool capacity: 18 tools Axes: 7 MACHINE DETAILS Control: Cincom Mitsubishi Meldas Dimensions & Weight Machine dimensions (LxWxH): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Bar feeder dimensions (LxWxH): 3,900 x 900 x 1,450 mm Bar feeder weight: 850 kg Hsdpexp Ngcsfx Afkefb EQUIPMENT Parts conveyor belt Bar feeder FMB Turbo 3-26

Condition: good (used), Year of construction: 2006, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2006 Motor power 7,5kW Input table automatic feeding 4,10m (throughfeed system) Outut table automatic 6 pcs. kickers on right outfeed table Hfodpfxoxtxi Ie Afksb Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: good (used), Year of construction: 2011, 1 x Minipack - Torre L Sealer Model: Pratika 56 Year: 2011 Hedpsxrcynsfx Afksfb Located in Leek, UK

Condition: refurbished (used), Year of construction: 2025, Complete Overhaul 2025 Saw Blade: 350 - 400 mm Motor Power: 6.5 / 8.5 kW Speed: 1,500/3,000 rpm Cutting Speed: 1,650 – 3,800 m/min Saw Height Adjustment: Electronic Working Range Square, max.: 120x120 mm Working Range Flat, max.: 200x100 mm Working Range Flat, max.: 250x70 mm (for extra width only) Working Range Round, max.: 130 mm Saw Feed Rate: 0 – 40 mm/s, infinitely variable Cut Length: 5-600 mm (up to 9,999 mm with multiple strokes) Feed Speed, max.: 500 mm/s Weight: approx. 1,300 kg Dimensions (LxWxH): 1,800 mm x 1,300 mm x 1,950 mm The machine will be completely overhauled in our facility and will subsequently be in as-new condition. The following components, among others, will be renewed: - Conversion to PLC control - Conversion to Siemens HMI operator interface - Conversion to ball screw with servo drive - New electrical components - New pneumatic lines - New pneumatic components - Conversion to valve terminal - Optimization of extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the machine enclosure The machine additionally features: - Soundproof enclosure - Spacer extension (for high-quality cut surfaces without return marks) Optional: - Multiple clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic feeding of raw materials up to 6 m long - 7.5 kW motor - 12 kW motor - Delivery and installation at your site Hedpfsxpqzhsx Afkefb - Training for your staff

Condition: new, Year of construction: 2025, NEW MACHINES The Mini Logy pallet exchanger system is well suited to most products, and where pallets need to be change from wooden pallets to plastic pallets automatically, or vice versa. The system can be assembled according to your needs and capacity. Hodpfx Afehx D Alskjfb Our systems can be customized and work with AGV solutions (Automated Guided Vehicles).

Condition: good (used), Year of construction: 2016, functionality: fully functional, total length: 1,700 mm, total height: 1,350 mm, total width: 1,000 mm, type of input current: DC, product height (max.): 240 mm, product length (max.): 540 mm, product width (max.): 400 mm, input voltage: 230 V, width of welding knife: 400 mm, length of welding knife: 550 mm, power: 2.5 kW (3.40 HP), L sealer, foot pedal operated, mobile, in working condition, optional shrink tunnel available. Hfjdpfx Aoxnm Eyefkob

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, controller model: Cincom Mitsubishi Meldas, counter spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Max. bar diameter: 20 mm Max. turning length: 205 mm Max. main spindle speed: 10,000 rpm Main spindle C-axis: 0.001 degrees Hfsdpfx Asxp Nd Uofkjb Max. sub spindle speed: 10,000 rpm Sub spindle C-axis: 0.001 degrees Tool capacity: 18 tools Number of axes: 7 MACHINE DETAILS Control: Cincom Mitsubishi Meldas Dimensions & Weight Machine dimensions (LxWxH): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Bar feeder dimensions (LxWxH): 3,900 x 900 x 1,450 mm Bar feeder weight: 850 kg EQUIPMENT Parts conveyor FMB Turbo 3-26 bar feeder

Condition: good (used), Year of construction: 1998, Automatic lathe KUMMER Standard K200 L-A D, No. A2222, year of manufacture 1998, control SIEMENS Sinumerik, with chip conveyor 2 identical machines available Hjdpounw Ekefx Afkjfb

Condition: new, Year of construction: 2025, L-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-L (high speed ). The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: max. 35 cycles/minute; packing sizes: (L + H) = 600mm provided that H < 180mm and (W + H) = 500mm provided that H < 180mm; length of sealing blades: horizontal = 703mm, vertical = 550mm; power: 220V/3.2kW; machine dimensions: L2015xW1470xH1300mm; weight: 850kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Hfjdpfx Aev Nl Awjfkeb

Condition: new, Year of construction: 2025, Automatic side sealing machine for shrinkwrapping packaging. Ideal to be combined with SHRINKtunnel-POF-L. Suitable for fully automated inline production. Automatic and manual infeed possible. - Specifications: max. speed of the machine in neutral: 35 cycles/minute; max. product dimensions: unlimited length, 300mm width, 150mm height; weight (net/gross): 400/500kg; power: 220V, 2kW; air: 5.5 bar/0.1m³/min; L1680xW960xH1500mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Hfjdpfx Ajv Nl Efofksb

Condition: new, Year of construction: 2025, Automatic side sealing machine for shrinkwrapping packaging. Suitable for very large/wide products. Ideal to be combined with SHRINKtunnel-POF-Xtra Wide. Suitable for fully automated inline production. Automatic and manual infeed possible. - Specifications: max. speed of the machine in neutral: 20 cycles/minute; max. product dimensions: unlimited length, W+H Hodpfsv Nl Elex Afkofb