SOOME1650 Au.Folder gluer bottom locking

STROJ ZA LEPLJENJE ŠKATEL HEBEI SOOME AU. FOLDER GLUER BOTTOM LOCKING GD-B1650

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, type of input current: three-phase, Automatic strapping machine in very good condition. Has been part of a larger system, but is not used. Only Strapex for sale. Crjdouaxgxspfx Amajf

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Machine is in very good working condition. Still in production. Cjdpfx Aeyux Sgsmaorf Test possible at any time. Available immediately.

Condition: used, Year of construction: 2017, machine/vehicle number: 244489, Machine as new. Very little used, only for sample production. Machine is fully equipped: see dokuments Crsdjx H Npuopfx Amaef Machine houers 22039.

Condition: new, Year of construction: 2022, CNC Vertical Machining Center VOC-1000 BASIC TECHNICAL DATA: - Travels in X/Y/Z axes: 1040 / 580 / 620 mm - Spindle speed 12,000 rpm; BT-40 - Work table 1120x560 mm; load capacity 750 kg - Distance from spindle center to table 125-745 mm - Distance between spindle axis and column 666 mm - Working feed rates up to 10 m/min - Rapid traverse rates 36/36/30 m/min - Positioning accuracy +-0.008 mm; repeatability +-0.005 mm - Machine dimensions (W x D x H) 2671 x 2800 x 2760 mm - Machine weight 7000 kg STANDARD MACHINE EQUIPMENT: - FANUC 0I-MF Plus control system (5); 10.4˝ LCD display - Spindle motor Fanuc Beta 11/15 kW - Servo motors for axes Fanuc Beta 1.8/1.8/3.0 kW - AICC program pre-reading of 40 blocks - MPG handwheel - Spindle oil cooler - Air blow gun and emulsion flushing gun - Chip conveyor (screw type) with container - 24-position tool magazine A.T.C - PMI ball screws and linear guides on all axes - Through-spindle coolant for tool changing - Chip flushing system - Heat exchanger for electrical cabinet - Automatic lubrication system - Signal light & work LED lamp - Fully enclosed work area with cabin - Tool kit - Leveling screws and pads - CE standards Codpoiwtnaofx Amajrf ADDITIONAL MACHINE EQUIPMENT: - Through-spindle coolant at 20 bar with additional 600l tank (5,000 EUR + VAT)

Condition: excellent (used), Year of construction: 2008, operating hours: 32,109 h, functionality: fully functional, center height in crank: 170 mm, center height: 175 mm, workpiece weight (max.): 80 kg, grinding length: 600 mm, center width: 350 mm, grinding wheel diameter: 500 mm, grinding diameter: 300 mm, distance between centers: 600 mm, workpiece diameter between centers: 300 mm, workpiece length between centers: 600 mm, grinding wheel width: 100 mm, feed rate X-axis: 285 m/min, input voltage: 380 V, TECHNICAL DATA: - Table tilt +8.5° - X-axis travel 285 mm - B-axis travel 800 mm - Angular grinding at 1° at –15° + 195 - Grinding wheel 500x63, 50 m/s - Distance between centres 600 mm, max 80 kg - Chuck B32 - Tailstock quill stroke 63 mm - Fine adjustment of tailstock 0.04 mm - FANUC 21-TB control, 10.4'' - Memory 64 KB - Coolant tank 375l with automatic filter paper feed Crjdpoy E N Iujfx Amajf ADDITIONAL EQUIPMENT: - Steady rest ARBOTECH – GR – 055V - MARPOSS measuring device UNIMAR S30 - MARPOSS measuring device P4 - MPM wheel balancing system This S33 grinding machine is additionally equipped with a MARPOSS device for fast and precise measurement of workpieces, an ARBOTECH auxiliary unit for grinding workpieces in a single setup, and a grinding wheel balancing system. The machine has been serviced annually by the manufacturer STUDER. It is highly precise and in excellent condition. It has been used for tooling jobs in batches of up to a maximum of 50 pieces. The machine is connected to the electrical network and ready for operation.

Condition: good (used), Year of construction: 2010, operating hours: 115,503 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, torque: 100 Nm, controller manufacturer: Fanuc, workpiece width (max.): 670 mm, workpiece weight (max.): 1,000 kg, total height: 2,940 mm, total width: 2,750 mm, table width: 670 mm, table length: 1,400 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 8 bar, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 420 V, type of input current: three-phase, Equipment: documentation/manual, BT 40. No chip conveyor. Crsdpfsyx U Nwox Amajf

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 123, We are selling a fully functional Kolbus DA260 casemaking machine. The machine has approximately 12 million cycles. It comes with a CD containing the software. Testing of the machine in production is possible by arrangement. Csdpeyw Tc Tsfx Amaerf

Condition: like new (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, Equipment: documentation/manual, M&R RADICURE D 36/6-4R little used, like new Crjdswaa Tdjpfx Amajf

Condition: ready for operation (used), Year of construction: 2002, operating hours: 10,700 h, DMG vertical machining center Model DMC 65 V Year : 2002 X - Y - Z travel : 650 - 500 - 500 mm. RPM : 18000 Tool change : 30 pcs. Spindle taper : ISO 40 Control : MILL PLUS Syncronspindle Cedpfoxqch Asx Amajrf Hand wheel for axes travel Interface RS-232 C Coolant

Condition: good (used), Year of construction: 2004, turning length: 1,345 mm, turning diameter: 420 mm, spindle speed (min.): 3,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,280 mm, Manufacturer: Mori Seiki Co., Ltd. (Nagoya, Japan) + chuck system Machine model: NL3000MC/1250 Serial number: NL301DJ0070 Year of manufacture: October 2004 Machine weight: 7600 kg Electrical data Codozm Tkaepfx Amaerf Voltage: AC 200 V Phases: 3 Frequency: 50 Hz Rated power: 44 kVA Full load current: 127 A Spindle motor current: 200 A Interrupting capacity: 5 kA Electrical diagram number: NL301DJ0070 The machine is a CNC turning center (Mori Seiki NL series) with a nominal electrical power of 44 kVA. CHUCK SYSTEM: Manufacturer: Kitagawa Chuck: B-212A821F Chuck cylinder: S2091 Technical data Permissible pressure (when using external chuck jaws on the standard package): 2.7 MPa Maximum speed: 3000 min⁻¹ CNC turning center of the NL series (Mill Center version) with milling capability (driven tools + C-axis). The data is compiled from original Mori Seiki / DMG MORI catalogs and matches your machine's nameplate (year 2004, weight 7600 kg, 44 kVA, 200 V). Capacity ValueMax. turning diameter420 mmMax. turning length1250–1345 mm Swing over bed995 mm Swing over carriage825 mm Bar capacity90 mm (3.5") Standard chuck12" (Kitagawa B-212A821F) Travels X-axis: 260–280 mm Z-axis: approximately 1280–1370 mm (depending on the exact configuration /1250) Y-axis: option (usually ±60 mm for Y/SY versions) Spindle Max. speed: up to 4000–6000 min⁻¹ (limited to 3000 min⁻¹ with your Kitagawa chuck) Spindle bore diameter: 105 mm (approximately 91 mm with chuck) Spindle mounting: A2-8 Spindle motor power: 22/18.5 kW (30/25 HP) or up to 30 kW (depending on the version) Minimum indexing angle: 0.001° Turret (MC version) Number of stations: 10 or 12 Rotary tools: yes (max. 6000 min⁻¹) Power of rotary tool drive: 5.5 / 5.5 / 3.7 kW Indexing time: approximately 0.2–0.3 s Rapid traverses and drives Rapid traverse X/Z: up to 30 m/min Rapid traverse Y: up to 10 m/min (if equipped) C-axis: up to 300–400 min⁻¹ Electrical and other data (from your nameplate) Rated power: 44 kVA Voltage: 200 V AC, 3-phase, 50 Hz Full load current: 127 A Machine weight: 7600 kg Controller: typically MSX-850 / MAPPS