KAMA Profold Folder gluer

KAMA ProFold

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Nsdpfjtk It Sjx Ab Ajdc Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: Njdpfx Abow Hrrre Asdc From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt

Year of construction: 2005, condition: excellent (used), KLIKLOK CERTIWRAP C-80 ID.NO. 2505 Kliklok HST Certiwrap C-80 sleeve machine for putting cardboard packaging around products. 3x different tools included & associated Nordson glue set year mod 2005. No. 1. 160 x 388 mm. No. 2. 160 x 407 mm No. 3. 422 x 162 mm dimensions 470 x 130 H 170 cm. Ndjdoki Tlqspfx Ab Aec

Condition: used, Schließrahmen - Frame SBB Letter Press HeidelbergSBB - 560 x 820mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Nedpfx Aberffm Nj Ajdc Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), A-4200-Tebel Cheese Vat Cheese Vat, capacity 10.000 L, Alfa Laval - Tebel , Good condition, 1 piece, closed Type with agitator, double jacket, Insulated. Heating jacket on lower half of cylindrical section • Cylinder length: 1.750 mm • Cylinder diameter: 2.860 mm • Internal lighting • Manhole with sliding door on top position • CIP connection • Outflow: 4" Outflow height: 400 mm Minimum level Weight 2.800 kg (L x W x H): 3.350x3.000x3.200 mm Ndodpfoh A Hb Uex Ab Aoc

Condition: good (used), Rotary vane vacuum pump /// Oil-lubricated Manufacturer: Busch Type: RC 0100B Ultimate pressure: approx. 20 mbar Pumping speed: approx. 100 m³/h Condition: General overhaul Ndsdpfxebrantj Ab Aoc If you have any questions about this listing or general questions about vacuum generation, please do not hesitate to contact us.

Condition: used, Year of construction: 1995, Colors: 8 Gearless: No Fast Sleeve Change: No 4 motor CNC per printing deck: Yes Computer Supervision: Yes Njdpfxjxzrx Ee Ab Ajdc Web Width: 1320 mm Print Width: 1300 mm Min. Print Repeat: 380 mm Max. Print Repeat: 1100 mm Mechanical Speed: 350 m/min Working Speed: Up to 300 m/min Unwinding & Winding: Turret, FLYING SPLICE, Max. Reel Diameter 1000 mm Drying: 2 Zones, 4 Fans, 2 Gas Burners Video Camera: Yes Corona Treatment: No Web Guides: FIFE Viscosity Control: Yes Wash System: Yes, F&K Ceramic Anilox Rollers + Closed Chamber Doctor Blade 1x 80 L/cm, 2x 200 L/cm, 2x 120 L/cm, 4x 200 L/cm, 2x 320 L/cm, 3x 400 L/cm 200 sleeves, repeat between 390 mm and 1090 mm (8 for each repeat: 390, 400, 410, 420, 430, 450, 480, 510, 530, 540, 550, 630, 660, 670, 740, 780, 800, 850, 880, 930, 990, 1030, 1050, 1090 mm + 8 twinlock 740 mm + 8 twinlock 1030 mm) Mandrels for sleeves: 6x360 mm, 6x400 mm, 6x420 mm, 8x460 mm, 8x530 mm, 6x560 mm, 12x620 mm, 8x780 mm, 8x850 mm, 15x990 mm Printing cylinders: 8x380 mm, 8x390 mm, 12x400 mm, 8x410 mm, 8x450 mm, 6x460 mm, 7x470 mm, 4x490 mm, 12x500 mm, 8x510 mm, 12x530 mm, 8x540 twinlock, 6x560 mm, 8x570 mm, 8x580 mm, 8x590 mm, 12x620 mm, 9x640 mm, 12x660 mm, 6x670 mm, 6x730 mm Overall Dimensions: Length = 17 m, Width = 5 m, Height = 6 m Central Drum Diameter: 2280 mm

Condition: new, Year of construction: 2025, MAX MAMMUT 400-500-600: High speed log profiling line (up to 600 mm in diameter) for the production of prisms, "river use", "trieste use" beams, boards in general and semi-finished products for pallets. FULLY HYDRAULIC MACHINERY Minimum diameter of logs 120 mm Maximum diameter of logs 600 mm Ndedpfx Abehpbthe Aec Minimum working length mm 1.800 Maximum working length mm "Infinite" (∞) Tool holder shaft diameter 60-80 mm Cutter diameter mm 300 Feed speed mt / min. 5 - 70

Condition: used, Year of construction: 2008, Automatische Bündelauslage / Fully Automatic Banding Delivery Palamides Delta 703 Baujahr / Year 2008 - Serial-No. 2244 Online-Video-Inspection by Skype-Video Nedpstqgncjfx Ab Aodc We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2026, condition: new, Picture 1: Offered Set of two load moving skates with 6tonnes capacity each. You can move 12tonnes in total. The skate system is equipped with high quaity polyurethane wheels. other pictures: Load moving skates in different sizes from 60-220mm height and capacities between 5 and 220 tonnes. Available as 3-Point, 4-Point, Containerskates, 360° Rotational skates with Polyurethane wheels (for all floors) or Nylon wheels (for flat and smooth floors). Nsdpfx Asgi Dl Neb Aedc Please send us an inquiry with information about the weight and project you have to move. We will then send you a detailed offer. Short delievery times, typicalles in stock. Pictures show a selection.