Used Automatic Flute Laminator for sale (22,839)

Condition: used, Hydr. differential stroke press, toggle lever hydraulic press, automatic punching press BRUDERER - LEINHAAS type AR 11-100.H Fine blanking press, knuckle-joint press Machine. No. P247 Year of construction 1991 Pressing force 100 ton (1000 kN) Knsdpfjgp T Euox Afijc Installation height max. 380 mm Table surface 1100 x 700 mm Outlet hole 800 x 220 mm ram surface 690 x 315 mm Frame width 1150 mm Lateral upright width 410 mm Stroke rate 45 and 80 strokes/min. Clamping pin bore Ø 50 mm Compressed air requirement 8-10 bar Hydraulic tank capacity approx. 700 liters Motor power main drive 22 kW Mains connection 400 Volt, 50 Hz, 28 kW - 2 speed settings for the number of strokes (45 and 80 strokes/min.) - electronic cam controller BALLUFF, type Minicontroller BMC4K - electronic tool monitoring EBERLE, type PLS 509S - KISTLER press force monitoring system - table surface with 22 mm T-slots and ram surface with 14 mm T-slots - Electronic stroke counter - motorized height adjustment for the ram - central oil lubrication - Work area shielding through pneumatic opening protective screen - adjacent control cabinet and electrical cabinet - 2 oil coolers with FLUTEC cooling fan (oil-air cooling) - Electrical circuit diagram and printout of PLC program available - Two-hand operation on the machine Space requirement (control cabinet) L x W x H 700 x 700 x 2100 mm ( approx. Space requirement (electrical cabinet) L x W x H 1700 x 650 x 2100 mm Space requirement (press) L x W x H 2350 x 1700 x 3300 mm Weight of the press 8500 kg Very good condition

Condition: good (used), Year of construction: 2016, functionality: fully functional, PASSPORT™ Automatic T-Shirt Unloader - automatic unloader for textiles - fully working - not much use Knedpfx Aeqvmkdefijc

Condition: used, Machine designed for continuous steam cooking of canned fish and fish on grills. AISI-304 stainless steel construction. IT CONSISTS OF: - An area for loading grills. - A steam cooking area consisting of 2 sections. - A drying area. EQUIPPED WITH: - Steam safety valve. Ksdpfx Afjxp Rcloisnc - Steam inlet. - Steam modulating valve. - Speed control. - Recirculation pump for the washing chain. - Safety lock for dirt. - Function: Continuous steam cooker for canned fish: sardines, mackerel, herring, etc. - Production: Depends on cooking time. GRILL DIMENSIONS: Interior grill dimensions: 1.20 m long x 0.145 m wide. Exterior grill dimensions: 1.22 m long x 0.16 m wide.

Condition: used, functionality: fully functional, GHD Hartmann Automatic Bread Slicing & Packaging Line – GBK-420 & Selectra SL-50 (2005) For sale is a complete automatic bread slicing and packaging line manufactured by GHD Hartmann, consisting of the GBK-420 packaging machine and the Selectra SL-50 bread slicer. Y.O.M: 2001 Key Features and Specifications: Production Capacity: Up to 3,300–3,600 loaves per hour (55–60 per minute), depending on loaf size. Slicer – Selectra SL-50: Features a lower drum oiling system, enabling slicing of bread with up to 40% rye content. Packaging Machine – GBK-420: Includes an extended automatic infeed conveyor for packaging whole unsliced loaves. Capable of packaging sliced half loaves using an integrated turning device, maintaining loaf orientation. Features a clip-closing system with an integrated HPD date printer (6-digit format: XX.XX.XX). Construction & Configuration: Stainless steel panels for hygienic and durable performance. Left-hand line configuration. Knjdpfxsxp N Rbj Afioc

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, spindle bore: 20 mm, spindle speed (max.): 10,000 rpm, bar passage: 20 mm, Equipment: documentation/manual, CNC sliding headstock lathe Citizen L520, year 2000 control, Cincom Mitsubishi Meldas, Knodpfx Aet St A Tofisc 7 axes (X1/Z1/Y1/C1/X2/Z2/C2) Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), Live tools on the main spindle FMB barfeeder Machine runs without problems or defects, can be inspected in production and seen running. Machine has all books and manual.

Condition: used, Empty weight: 6.500 kg - Documentation available: No Knedpsxb Rp Nofx Afijc - Transport weight [kg]: 6500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2011, Vertical Semi-Automatic Chainsaw EISMO-IMET type WS 370 SA Year of construction: 2011 Blades dimension: Ø 370 mm Knedpfx Asxp Nxfefiec Cutting capacity: Straight cut Ø 120 /180 x 100/100 x 100 mm Bevel cut: 45° right - 45° left - 60° right Pneumatic vise Adjustable forward/downward Lubricant pump Voltage: 380 V Width: 800 mm Depth: 1200 mm Total height: 2000 mm Weight: approx 500 kg

Condition: like new (used), Completely made of special stainless steel Knedpfx Aepgnftjfisc Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Depth: 150,0 Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz

Year of construction: 2008, operating hours: 40,792 h, condition: ready for operation (used), functionality: fully functional, I am offering for sale an automatic injection molding machine from the renowned German manufacturer KURTZ GmbH, model K1318HP5MP. The machine was used in a production facility for processing EPP plastics. The device is equipped with all required CE markings and the manufacturer's nameplate. The machine stands out for its robust, heavy-duty construction and high reliability. ⚙️ Technical specifications: Type: automatic injection molding machine / plastics foaming machine Control: semi-automatic / automatic Year of manufacture: 2008 Weight: 16 tons Power: 65 kW Power supply: 400 V Dimensions and further technical details available on request Kodpexp Hvhefx Afionc ✅ Condition and readiness: The unit was in continuous operation until recently We offer assistance with loading and transport

Condition: good (used), Year of construction: 2007, Koenig I-Rex II Automatic Divider - used - year of manufacture: 2007 - 8-row - computer-controlled (independent of the line) - hopper with portioning device - weight range: 20-110 g - machine from production - without warranty - collection from warehouse/shipping option available Knjdpfx Afoxp Hmgsisc - price on request

Condition: good (used), Tornos ENC 74 T CNC automatic lathe TECHNICAL DATA Movable headstock Maximum round bar passage: 7 mm Minimum round bar passage: 1 mm Square bar capacity: 5 mm Hexagonal bar capacity: 6 mm Maximum turning length of fixed guide bush (7 mm): 113 mm Maximum turning length of fixed guide bush (10 mm): 109 mm Turning length of synchronously rotating guide bush (10 mm): 81 mm Turning length of synchronously rotating guide bush with 3 positions: 72 mm Maximum turning length of MAGIC guide bush (7 mm): 104 mm Maximum turning length of Habegger guide bush (10 mm): 103 / 94 mm Collet chuck Schaublin type F13: 76-357 Minimum and maximum clamping force: 270 and 590 daN Kodpfxjvdwcfj Afijnc Main spindle speed: 15`000 rpm Fast feed (headstock): 15 m/min Resolution of the measurement (Z1): 0.00025 mm Guide bush holder Number of tools: 7 Maximum number of cross drilling attachments and cross milling cutters: 3 Maximum speed: 6000 rpm Square layout of the tools: 8 x 8 mm Rapid feed of the tools (X1/Y): 7.5 / 10 m/min End attachment Movement speed X2: 15 m/min Movement speed Z2: 15 m/min Number of positions for end units: 3 Center distance between units: 50 mm Counter headstock maximum clamping diameter: 7 mm Collet chuck Schaublin type F13: 76-357 Maximum counter-spindle headstock speed: 12`000 rpm Speed of the rotating units: 12`000 rpm Counter operations Number of positions: 3 Diameter of bores for tool carriers: 35 mm Center distance between positions: 50 mm SCOPE OF OFFER Including: (list not exhaustive) Tornos ENC 74 T CNC automatic lathe Control: GE Fanuc Series O-TT Fire extinguishing system: Siemens Chip conveyor Coolant tank / pump High pressure pump Bar feeder: LNS Exact scope of supply according to photo gallery No liability is assumed for the correctness, completeness and up-to-dateness of the information

Condition: excellent (used), Year of construction: 2013, Traub TNL 18-7B CNC Automatic Lathe Base machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected power: 24 kW Main spindle Max. bar capacity: 18 mm Max. speed: 12,000 rpm Cross-cut speed: 5,000 rpm Z stroke: 205 mm Rapid traverse: 40 m/min Z measuring system resolution: 0.001 mm Feed force: 3000 N Spindle head / short taper: Traub short taper mount Max. clamping force: 1400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm2 Total cylinder travel: 5 mm Clamping tube thread: M25 X 1 Counter spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. speed: 12,000 rpm Strokes: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Top tool turret with B-axis Number of stations: 8 Shank cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Knodswg Takopfx Afiec Lower tool turret Number of stations: 7 + counter spindle Shaft cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Tool drive for upper tool turret Number of driven stations: Max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Tool drive for lower tool turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Tool drive for the rear unit Number of stations: 7 Number of driven stations: max. 3 Pitch spacing: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 SCOPE OF OFFER INCLUDES (list is not exhaustive): Traub CNC lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire extinguishing system Chip conveyor Bar loader Operational documentation For the exact scope of offer, see the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: excellent (used), Star SA-12 Swiss-Type Lathe Technical Specifications Rapid feed (X, Y, Z, ZB): 370 mm Maximum turning feed (X, Y, Z, ZB): 270 mm Smallest input unit (X, Y, Z, ZB): 120 mm Machining Capacity Maximum turning diameter: 13 mm Maximum headstock stroke: 140 mm Maximum drilling capacity: 7 mm Maximum tapping capacity: 7 mm Maximum thread cutting capacity: M6 x P1.0 Main Spindle Spindle speed: 500 – 12,000 rpm Drive: Spindle drive Main spindle motor: 2.2 / 3.7 kW Main spindle indexing angle: 1° or 15° Main spindle bore: 20 mm Tool slide Type: Linear slide Number of tools: 6 tools Number of driven tools: 3 tools (collet: ER 11) Driven tools Spindle speed: 1970 / 2330 rpm Max. drilling capacity: 4 mm Max. milling capacity: 4 mm Pick-up spindle Max. clamping diameter: 13 mm Max. part length for forward ejection: 85 mm Knsdpfx Afjwi Ty Asioc Max. unclamping length: 30 mm Spindle speed: 500 – 8000 rpm Pick-up spindle motor: 0.5 kW Tool selection: 4 tools Max. drilling capacity: 4 mm Max. tapping capacity: M3 x P0.5 Power supply Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power: Average: 6.0 KVA SCOPE OF OFFER Among other things: (list not exhaustive): STAR SA-12 Swiss-Type Lathe Control: Fanuc Series 18i-T Fire Extinguishing System Coolant Tank Transformer LNS Bar Loader Exact scope of supply as per photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information.

Year of construction: 2006, condition: excellent (used), STAR ECAS 32 T CNC automatic lathe - Very good condition - Many accessories available - Detailed photo gallery included in PDF catalog TECHNICAL DATA Max. Machining Diameter: 32 mm Max. Headstock Stroke: 350 mm Tool Post: First Turret: 10 stations Second Turret: 10 stations Number of turning tools: Max. 2 tools / station Tool shank: 16 mm Sleeve Holder: Number of tools: Max. 3 tools / station Max. Drilling Capacity: 23 mm Max. Tapping Capacity: M12 X P1.75 Max. Die Cutting Capacity: M12 X P1.75 Power Driven Att. Number of Tools: Max. 2 tools / 1 station Max. Drilling Capacity: 10 mm Max. Tapping Capacity: M8 X P1.25 Max. Milling Capacity: 12 mm Max. Slotting Capacity: 2 mm X 10 mm Main Spindle min. indexing degree: 0.01° Main Spindle Speed: 7`000 rpm Power Driven Att. Spindle Speed: 5`700 rpm Coolant Tank Capacity: 230 l Dimensions: 3175 x 1745 x 1860 mm Kedpfxjl R Ix So Afienc Center Height: 1084 mm Weight: 5`700 kg Power Consumption: 8.0 KVA No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: good (used), Year of construction: 2002, TRAUB TNL 12/7 CNC sliding headstock automatic lathe TECHNICAL DATA Bar capacity: 12 mm Main headstock strokes: 130 / 80 mm Spindle power: 4 kW Speed, main spindle: 12`000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Knedpfx Afet E Dbysiec Max diameter, counter spindle: 12 mm Speed, counter spindle: 12`000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF OFFER U.A: (list not exhaustive): Traub TNL 12/7 CNC lathe Meyrat high-frequency spindles, 2 pieces Tool holders (driven and non-driven) FMB Minimag 3200 C bar loader Hydraulic unit High pressure pump Chip conveyor Exact scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Year of construction: 1996, functionality: fully functional, STAR SH-12 CNC long lathe TECHNICAL DATA Turning diameter: 13 mm Headstock stroke: 140 mm Speed: 400 – 10,000 rpm Spindle power: 1.5 kW Number of tools: 5 Number of tools in the device: 3 Dimensions of the machine: 1500 x 950 x 1650 mm Weight: Approx. 950 kg Knjdjvllmhjpfx Afioc SCOPE OF OFFER Among other things: (list not exhaustive) STAR SH-12 CNC lathe Bar loader Coolant pump Transformer Exact scope of offer according to photo gallery We accept no liability for the accuracy, completeness and timeliness of the information.

Condition: good (used), Year of construction: 2005, CITIZEN K12 CNC lathe TECHNICAL DATA Max. machining diameter: 12 mm Max. machining length: 200 mm Max. extension length: 80 mm Max. front drilling diameter: 10 mm Max. front thread diameter: M8 Spindle diameter: 16 mm Spindle speed: 15000 rpm Max. machining diameter of the counter spindle: 12 mm Max. machining length of the counter spindle: 40 mm Kedpfsvrz H Rox Afienc Max. drilling diameter for rear machining: 6 mm Max. thread diameter for rear machining: M5 Spindle speed, counter spindle: 10000 rpm Tool attachment, number of tools: 8 Speed of the driven tools: 6000 rpm X1 axis: 122 mm Z1 axis: 200 mm Z2 axis: 150 mm Weight: 1950 kg SCOPE OF OFFER Among other things: (list not exhaustive) Citizen K12 CNC lathe Chip tray Transformer Complete operating documentation Exact scope of offer according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information

Year of construction: 1999, condition: excellent (used), Citizen M20-C CNC Swiss type lathe Technical Data Ksdpfoktfiasx Afisnc Max. Machining Diameter: 20 mm Max. Machining Length: 320 mm / chuck Max. Drilling Diameter: 10 mm Max. Tapping Diameter: M8 Through-hole Diameters: 24 mm, 21 mm Spindle Speed: 200 - 8100 rpm Spindle Speed Change Steps: Steepless, S4-Digit Rotary Tool Max. Drilling Diameter: Gang Tool: 5 mm Turret: 5 mm Rotary Tool Max. Chucking Diameter: Gang Tool: 10 mm Turret: 7 mm Rotary Tool Max. Tapping Diameter: Turret: M5 Tool Spindle Speed: Gang Tool: 250 to 5000 rpm Turret: 320 to 6380 rpm Tool Spindle Speed Change Steps: Steepless, S4-Digit Back Spindle Max. Chuck Diameter: 20 mm Max. Front Separate Length of a Back Machined Workipece: 125 mm Back Machining Max. Drilling Diameter: 8 mm Back Machining Max. Tapping Diameter: M8 Back Spindle Speed: 150 to 7200 rpm Back Spindle Speed Change Steps: Steepless, S4-Digit Number of Tools to be mounted Gang Tool: Cutting 5, Drilling: 3 (Total 8 tools) Turret: 10 Count of Turret Indexing: 10 Tool Holder: Gang Tool: Special M20 gang tool Turret: Ø 10- Ø 10 mm (Positioning Pin Type) Cutter Size: Gang Tool: 13 x 13 x 130 mm Turret: 10 x 10 x 60 mm Max. Diameter of Tool Mounted on Rotary Tool Holder: Gang Tool: Drill, End Mill: Ø 10 mm Turret; Drill, End Mill: Ø 7 mm Tap: M6 Slitting Cutter: 45 x 12.7 mm Rapid Feedrate X1 Axis: 15 m/min X2, Y1, Z1, Z2, Z3 Axes: 18 m/min A2 Axis: 200 rpm Least Input Increment: X1, X2, Y1 Axes: 0.001 mm Z1, Z2, Z3 Axes: 0.001 mm A2 Axis: 0.001 deg. Spindle Indexing: 0.001 ° Center Height: 1070 mm Motors: Spindle Motor: 2,2 / 3,7 kW Back Spindle: 0,75 / 1,5 kW Gang Tool: 0,4 kW Turret: 0,4 kW Y1, A2 Axes Feed Motor: 0.3 kW x 2 X2, Y1, Z1, Z2, Z3 Axes: 0.5 kW x 5 Hydraulic Motor: 0,4 kW Coolant Motor: 0,25 kW Lubricant Motor: 0,004 kW Input Power Capacity: 14 KVA Required Floor Space: 1100 x 2540 x 1700 mm Weight: 2500 kg We do not take any responsibility for the correctness, completeness and topicality of the information.

Condition: good (used), STAR SV-32 CNC sliding headstock automatic lathe TECHNICAL DATA Main spindle, bar capacity: 32 mm Travel: 310 mm Spindle speed: 7000 rpm Spindle drive power: 7.5 kW Minimum resolution, C-axis: 0.01 ° Counter spindle, bar capacity: 32 mm Spindle speed: 7000 rpm Spindle drive power: 7.5 kW Resolution, C-axis: 0.01 ° Turret: Number of tools: 10 of which driven: 10 Speed of the driven tools: 5`700 rpm Driven tools, power: 2.8 kW Tool carrier: Number of tools: 4 Of which driven: 3 Speed of the driven tools: 6'000 rpm Weight and dimensions: Weight: 3800 kg Dimensions: 2700 x 1400 x 2400 mm SCOPE OF OFFER U.A: (list not exhaustive) Knodpfx Afeu Uicyeijc Control system: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson transformer High pressure pump Parts conveyor Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), Year of construction: 2006, TECHNICAL DATA Axis data Rapid traverse rates: X, Y, Z, ZB, XB: 35,000 mm/min C: 198,000 °/min (550 min⁻¹) Maximum feed rates: X, Y, Z, ZB, XB: 10,000 mm/min C: 10,000 °/min (27.8 min⁻¹) Minimum input increment: X, Y, XB: 0.001 mm / 0.0001 inch (diameter) Z, ZB: 0.001 mm / 0.0001 inch C: 0.001° Machining capacities Maximum machining diameter: Ø16 mm (5/8 in) Maximum headstock stroke: fixed guide bushing: 205 mm (8 in) rotating guide bushing: 155 mm (6–3/32 in) rotating magic guide bushing: 155 mm (6–3/32 in) Maximum drilling capacity with driven tool: Ø6 mm (15/64 in), Ø4 mm (5/32 in) Maximum tapping capacity with driven tool: M5×P0.8, M3×P0.5 Maximum milling capacity: Ø10 mm (25/64 in), Ø7 mm (9/32 in) Maximum thread cutting capacity: M8×P1.25 Machine configuration Operating mode: right-hand machining station Design: integrated mechanical/electrical setup Dimensions (L×W×H): 1861 × 1060 × 1750 mm Spindle height: 1060 mm Weight: approx. 1700 kg Main spindle Spindle speed: max. 10,000 min⁻¹ Speed control: S-command + direct 5-digit command Main spindle drive: 2.2 kW (continuous), 3.7 kW (15 min/60% duty cycle) Indexing: 15°, 1° Tool combinations Various combinations with 1–3 spindles for tool diameters Ø12 mm, Ø10 mm, or Ø6 mm Tool holders for ER11 or ER16 Drill mounting Number of tools: 4 Knedpfx Afowvap Roioc Max. speed: 5000 min⁻¹ (ER16), 7500 min⁻¹ (ER11) Drive motor: 0.4 kW Tool selection: servo motor Backworking unit Max. chuck diameter: Ø16 mm (5/8 in) Max. part length: 80 mm Max. outer spindle travel: 30 mm Max. part ejection length: 50 mm Spindle speed: max. 8000 min⁻¹ Spindle drive: 100 W, AC servomotor Tools: 4-spindle unit Max. drilling capacity: Ø8 mm (5/16 in) Max. tapping capacity: M6 × P1.0 SCOPE OF SUPPLY Includes (non-exhaustive list): STAR SB-16D CNC Swiss-type lathe Fire extinguishing system Coolant tank LNS Tryton-112 bar feeder High-pressure pump Machine accessories Bar feeder accessories Complete operating documentation Exact scope of supply as per photo documentation.

Condition: good (used), Year of construction: 2003, Tsguami BS18DE(S)-III CNC automatic lathe Kedjq E Ra Sjpfx Afijnc Good condition Incoterms EXW CH-4528 Zuchwil The complete photo gallery and the technical data can be found in the attached catalog. No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Year of construction: 2001, Tsugami BS12-III CNC sliding headstock automatic lathe Knodpfx Aoq H Ea Uofisc TECHNICAL DATA turning diameter: 3-12 mm Turning length: 170 mm Max. Bore diameter: 7 mm Max. Internal thread diameter: M6 Speed: 12`000 rpm Speed, counter spindle: 6`000 rpm Number of axes: 6 Dimensions: approx. 190 x 130 x 220 mm Weight: 2200 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), TECHNICAL DATA AXLE Rapid feed X,Y: 15000 mm/min Rapid feed A,B: 15000 mm/min Rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C-axis: 0.001° MACHINING PERFORMANCE Max. turning diameter: 20 mm Max. Headstock stroke: 205 mm Max. Drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. Tapping capacity: Stationary: M10 x P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm WHEELING SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Clamping length: 75 mm Spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operation mode: Right-handed Dimensions: 2700 x 1400 x 2400 mm Weight: 3400 kg SCOPE OF OFFER U.A: (list not exhaustive) Knjdpfeu Uic Tex Afioc Control system: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), Year of construction: 2007, STAR ECAS 12 CNC Swiss-type lathe TECHNICAL DATA Maximum machining diameter: 13mm Max. headstock stroke: 205 mm Maximum drilling capability: Stationary tool: 10 mm Power driven tool: 8 mm Maximum tapping capability: Stationary tool: M8 x P 1.25 Power driven tool: M6 X P1.0 Maximum milling capability: 10mm Maximum die cutting capability: M8 x P1.25 Maximum slotting capability: 1.5 x 4 mm Feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min Ksdjwf Aclepfx Afisnc C1, C2: 194,400°/min Maximum turning feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min C1, C2: 194,400°/min Minimum input increment: X1, X2, X3: 0.001 mm Z1, Z2, Z3, Y1, Y3: 0.001 mm C1, C2: 0.001° Spindle speed: 12,000 rpm Indexing angle: 0.01° Dimensions: 2588 x 1150 x 1765 mm Center height: 1040 mm Weight: 3500 kg SCOPE OF OFFER INCLUDES (list not exhaustive): Star Ecas 12 CNC lathe Coolant tank / pump High-pressure system Transformer Operating documentation Exact scope of offer as shown in the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information.

Condition: good (used), STAR SV-20 CNC automatic lathe TECHNICAL DATA OF THE CONTROL AXES rapid feed X,Y: 15000 mm/min rapid feed A,B: 15000 mm/min rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C axis: 0.001°. MACHINING CAPACITY Max. turning diameter: 20 mm Max. headstock stroke: 205 mm Max. drilling capacity: stationary: 14 mm; driven: 8 mm Max. Tapping capacity: Stationary: M10 X P1.5; Driven: M6 X P1.0 MAIN SPINDLE Kodsiq Dp Nepfx Afisnc Spindle speed: 500 - 10000 rpm Drive: spindle drive main spindle motor: 3,7 / 5,5 kW main spindle bore: 26 mm PICK-UP SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Unclamping length: 75 mm spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2,2 / 3,7 kW Indexing angle: 1°, 15 CONFIGURATION Operation mode: right-handed Dimensions: 2670 x 1375 x 1650 mm Weight: 3400 kg We do not guarantee the accuracy, completeness and timeliness of the information.