Used Auto Edger for sale (6,040)

Year of construction: 2019, condition: ready for operation (used), A Flying Probe Tester Seica Pilot V8 Next Series with inline handling module on the left for vertical tilting of the PCB and inline handling module on the right for horizontal tilting and rotating of the PCB is available. Flying Probe Test System Seica Pilot V8 Next Series: PCB clamping system: manual, double-acting, manual active test area: 538x610mm, active test area: 518x610mm, PCB dimensions: 540x610mm, min. PCB size: 20x20mm, PCB thickness: 0.3 to 5mm, max. component height: 37mm, PCB loading: vertical, UUT edge clearance manual/automatic: 2/6mm, length: 1750mm, width: 1030mm, height: 1995mm, weight: 1.4t. Test tools/techniques: FNODE signature analysis on the nets of the unit under test, standard analog and digital in-circuit test, vectorless tests, JSCAN and OPENFIX to test ICs for opens and shorts, PWMON net analysis with power-on of the assembly, continuity tests to detect open connections on the assembly, visual tests for detecting component presence, component absence and rotation, high-resolution color camera, optional functional tests and boundary scan test capabilities, optional on-board programming tools for digital components, with complete documentation. An inspection on site is possible. Iodpfoy Sv S Hox Aqujau

Condition: used, mileage: 214,379 km, power: 309 kW (420.12 HP), first registration: 03/2019, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 8x2, wheelbase: 6,050 mm, fuel: diesel, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 12,000 mm, total width: 2,550 mm, loading space length: 9,700 mm, loading space width: 2,530 mm, loading space height: 1,120 mm, Year of construction: 2019, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, lane keeping assist, retarder, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Adaptive cruise control - Remote central locking - Lift axle - Air suspension - Engine brake - PTO (Power Take-Off) - Radio - Reversing camera - Disc brakes - Sun visor - Lane keeping assist - Toolbox - Central lubrication system = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Front axle: Steered; left tire tread: 40%; right tire tread: 40%; suspension: leaf suspension 1st center axle: Steered; left tire tread: 40%; right tire tread: 40%; suspension: air suspension 2nd center axle: Twin tires; left inside tread: 40%; left outside tread: 40%; right inside tread: 40%; right outside tread: 40%; suspension: air suspension Rear axle: Steered; left tire tread: 50%; right tire tread: 50%; suspension: air suspension Iodpfxjy Smvvs Aquoau Weights Unladen weight: 14,382 kg Payload: 17,618 kg GVW: 32,000 kg Financial Information Price: On request Identification Type number: AD320S42 8x2 / RETARDER / WINCH = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-EN) Wouter Greutink (NL-DE-EN-ES-IT) We speak Russian. We strive to provide accurate information, but no rights can be derived from the texts provided.

Condition: good (used), Original spacer rings PAUL in various widths for edging saw KME 2 or BM, outside-Ø 120 mm, bore-Ø 75 mm, with 2 keyways Original PAUL saw bushings with effective clamping lengths of 55 mm and 110 mm for the KME 2 and BM Isdpfxeiimz Ae Aquoau Original PAUL spacer rings in various widths for S 900 re-cutting saw, outside-Ø 150 mm, bore-Ø 110 mm, with 2 keyways

Year of construction: 1990, condition: excellent (used), A KT-53 Board Edger that is rebuilt to a KT-52 Iaedpfxehuiwuo Aqueu

Condition: new, Year of construction: 2026, functionality: fully functional, It is a perfect complement to obtain the desired width product from the edged plates. While providing ease of use with its simple, compact and versatile designs, it can be integrated into the existing facility of any business thanks to its easy assembly. - Models with 120-160 mm cutting heights - Possibility to apply 2 or 3 saws to the movable and fixed sleeve - Manual or automatic feeding - Automatic fueling - Possibility to process 1000 mm wide products Optional equipment; - PLC controlled manual or automatic feeding - Up to 3 axis movable saw option - Removal of waste from the system thanks to separator arms - Cutting easily and in the most efficient way with the alignment arms. Technical Specifications Max. Cutting Height : 120 mm / 160 mm Iaodpfx Aqjrzakmjuou Min. Cutting Height : 15 mm Max. Cut Width : 800 mm Max. Working Width : 1000 mm Min. Cut Length : 800 mm Max. Feed Rate : 40 m/min Saw Rotation Cycle : 3000 rpm Upper Rollers : 2 x 240 Bottom Rollers : 5 x Ø135 mm (120)

Condition: new, Year of construction: 2026, Semi-automatic dosing-packing machine for nuts, seeds, sweets, confectionery, fertilizers, grains, coffee and other dry bulk products into pre-made packages (Doy-pack, block-bottom, gusset and others) Specifications: • The dosing range - from 50gr. up to 2000gr. Iajdpsic Rmajfx Aquju • Continuous thermo-sealing device with adjustable speed and temperature • Capacity up 10pack./min. (depending on product and operator pace) • Control - color touch screen, multilingual menu • Supply voltage - 220V; 50Hz, 1kW • CE – certified, made in Lithuania (EU)

Condition: excellent (used), - Track width: 340 mm Iaodey I Eaxspfx Aquou - Max. cutting width: 430 mm - Max. cutting height: 120 mm - Main motor power: 30 kW - Saw blade diameters: 250/360 mm - Electric height adjustment - Feed motor power: 1.5 kW - Two movable saw blades - Fixed bushing included - Max. workpiece width: 1000 mm - Min. workpiece length: 600 mm - Spindle diameter: 65 mm - Bushing diameter: 80 mm

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Complete Sawmill with Carriage Bandsaw and Edger including conveyors Isdpfx Aqey I A H Aoueau 4 Headblock Log Carriage - 1200 mm Fully Hydraulic Bandsaw - 1+2 Edger

Year of construction: 2007, condition: excellent (used), Forklift gooseneck, gooseneck for roll pallets, heavy-duty roll pallets, platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: Plan, forklift gooseneck -Gooseneck: with automatic locking Iodpjy Aya Nefx Aqueau -Load capacity: 4 t -Transport dimensions: 1060/2580/H850 mm -Weight: 522 kg

Condition: new, Year of construction: 2024, MONOBLADE EDGER Iajdpefw Nv Rsfx Aqueu lenht of cut from 4,2 to 8,2 mt max depth of cut 160 mm parallel guide hopper

Condition: good (used), -KOM 3005- We offer here a used bar feeder for lathes. Technical data Machine dimensions: (w x d x h) approx. 3850 x 700 x 1300 mm Power connection / control voltage: 220 Volt / 50 Hz Machine no.: 90042033 Remarks: The machine is under power in our warehouse and is ready for demonstration Iajdpfjurldcsx Aquju

Condition: excellent (used), Year of construction: 1990, I sell the press for glued massive solid wood panels Maweg Hildebrand Euro-Auto Iedpfx Aqsg Dvu Teujau Material size 2800X2000 x 120mm 2pcs. vertical pistons hydraulic. 2pcs. horizontal pistons hydraulic. Very good condition. Avialable immediately.

Condition: like new (used), Year of construction: 2021, Machine bought new in 2022 and hardly used. It literally still looks brand new. Rare opportunity. Iedpfjv Hfg Rox Aqujau

Condition: used, axle configuration: 2 axles, loading space length: 13,800 mm, loading space width: 2,550 mm, loading space height: 780 mm, total length: 13,800 mm, total width: 2,550 mm, suspension: air, tire size: 205/65R17.5, color: grey, Equipment: ABS, = Further Options and Accessories = - Toolbox = Notes = New trailer, available for immediate delivery. Not yet registered. Fitted with: ROR axles with drum brakes. Air suspension with lifting and lowering valve. 4 x LED work lights. 2 x LED flash lights on rear frame. 4 sockets for width markers. Edge profile with 30 mm holes every 1000 mm. Iasdewbzi Nspfx Aqueu 2 x 10 units stake pockets in the side beam. Mounting bracket for winch. Rear storage compartment for ramps, Maximum ramp dimensions: 2400 x 470 x 150 mm Stainless steel toolbox 1000 x 350 x 500 mm. Hardwood floor. = Further Information = Tire size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Tire tread left inner: 100%; Tire tread left outer: 100%; Tire tread right inner: 100%; Tire tread right outer: 100% Rear axle 2: Twin tires; Tire tread left inner: 100%; Tire tread left outer: 100%; Tire tread right inner: 100%; Tire tread right outer: 100% Unladen weight: 6,600 kg Payload: 20,600 kg Gross vehicle weight: 27,200 kg Type number: LOW LOADER / AUTO-CARAVAN TRANSPORTER = Company Information = ALL PRICES ARE NET EXPORT PRICES, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) We also speak Russian. We strive to provide accurate information but no rights can be derived from the published texts.

Condition: used, first registration: 02/1990, Year of construction: 1990, SPIERINGS Lattice Mast Tower/Truck Crane Chassis: • Engine power: 222 kW / 305 HP / displacement 8,250 cm³ • Vehicle dimensions: 12,395 x 2,600 x 4,000 mm • Operating weight: 35,000 kg • Permissible gross weight: 36,000 kg incl. 7,080 kg counterweight • Tires: 445/65 R22.5 • 3 axles • 1st and 3rd axles are steered • Beacon lights Crane: • Max. outreach: 30.4 m • Max. lifting capacity: 5,000 kg at 9.3 m outreach • Drive system: hydraulic, hydro pumps electrically powered by external power source or generator operation • Control system: electrically operated proportional and control valves • Max. corner load: 204 kN • Max. speed: 85 km/h • Can only be moved from the carrier vehicle! Hoisting Gear: • Motor: hydraulic variable displacement motor • Drive group: 1Am • Displacement: 20..55 cm³ • Max. supply pressure: 260 bar • Transmission: planetary gear, i=27 • Drum diameter: 375 mm • Max. rope pull: 25 kN • Corresponding rope speed: 30 m/min • Holding brake: spring-loaded multi-disc brake Trolley: • Motor: hydraulic fixed displacement motor • Drive group: 1Am • Displacement: 16 cm³ • Max. supply pressure: 265 bar • Transmission: planetary gear, i=10.4 • Drum diameter: 200 mm • Max. rope pull: 6 kN • Max. speed: 50 m/min • With limit switch • Holding brake: spring-loaded multi-disc brake Slew Gear: • Motor: hydraulic fixed displacement motor • Displacement: 16 cm³ • Max. supply pressure: 300 bar • Transmission: planetary gear, i=160 • Max. superstructure slewing speed: 1.3 rpm • Slewing brake: hydraulic brake valve • Holding brake: spring-loaded multi-disc brake Luffing Winch: • Drive group: 1Em • Motor: hydraulic fixed displacement motor • Displacement: 16 cm³ • Max. supply pressure: 220 bar • Transmission: planetary gear, i=92 • Drum diameter: 200 mm • Max. rope pull: 38 kN • Max. speed: 18 m/min • Holding brake: spring-loaded multi-disc brake • With limit switch Load / Load Moment Limiter: • Pressure switch on hoisting drive motor • Mechanical switch triggered by turret frame bending Tower: • Working height: 20.8 m • Outer tower: length 9.9 m; Inner tower: 11 m Iaedswmpczepfx Aqueu Jib: • Trolley jib in lattice construction; can be positioned either horizontally or at 30° incline • 1st jib section: length 11 m / 2nd section: 11.1 m / 3rd section: 7.8 m - German machine! - Ready for operation! Errors and prior sale excepted! = Further information = Main boom length: 30.4 m

Condition: used, functionality: fully functional, Year of construction: 2015, - Made in Poland - Year of manufacture: 2015 - DTR, CE - Electric saw blade spacing adjustment TECHNICAL SPECIFICATIONS: - Cutting height: 60 mm - Saw blade diameter: 250 - 350 mm - Number of saw blades: 2 pcs - Max. cutting width: 700 mm - Min. cutting width: 90 mm - Max. blade spacing: 460 mm - Feed speed adjustable via inverter - Feed speed range: 0 - 40 m/min - Main motor power: 2 x 4.7 kW - Feed motor power: 0.75 kW - Blade spacing motor power: 0.12 kW - Total power requirement: 11.5 kW - Roller table length: 2 x 240 cm - Roller table width: 460 mm Iasdpfx Aew H Rdaoquou - Extraction port diameter: 160 mm - Transport dimensions (L/W/H): 200 / 200 / 140 cm - Weight ~ 1000 kg

Year of construction: 2026, condition: new, ADL III 1500 AUTOMATIC LINE FOR THE PRODUCTION OF VENTILATION DUCTS HVAC This rectangular ventilation duct machine is capable of producing flat sheets and U- and L-shaped duct elements without the need for additional programming. It can also produce one type of L-shaped Pittsburgh Bracket. Auto Duct Former is equipped with Servo Motor and Servo Reducer to avoid measurement errors. The bender and guillotine are driven by a hydraulic system. Equipped with two types of ribbing, type Z and trapezoidal. It has a selector to change sheets to 3 sets of uncoilers Technical Specifications Range of processed sheets: Min: 0.5mm - Max: 1.5mm Minimum channel size: 100x100mm Dimensions: W 2,200mm x D 5,000mm x H 1,500mm Weight: 3.000Kg Power: 2.2Kw Servo Motor Decoilers on rails: 3 pcs Iodpfx Aep T Sk Hsqujau Plate change selector

Year of construction: 2026, condition: as good as new (ex-display), ADL AUTOMATIC LINE FOR THE PRODUCTION OF VENTILATION DUCTS So that the rectangular section ventilation duct machine is able to produce flat plates and U-shaped and L-shaped pieces without the need for additional use. It can also produce one type of Pittsburgh L-shape Auto Duct. Previously it is equipped with Servo Motor and Servo Reducer, which avoids making errors in measurements. The bender and guillotine are driven by a hydraulic system. Possibility to choose Z-type or trapezoidal ribbing or both in one machine. Iodpfx Aqjfwmqvjujau Technical Specifications Range of processed sheets: Min: 0.5mm - Max: 1.5mm Minimum sewerage: 100x100mm Dimensions: W 2,000mm x D 2,000mm x H 1,500mm Weight: 3,000 kg Power: 2.2 kW servo motor

Condition: used, Esterer DKV double edger Maximum pass-through height: 160 mm Maximum pass-through width: 800 mm Zero line on the right Left-hand machine (adjustable saw blade on the left) with 2 crosscut saws with roller infeed with lath head with sliver separator with drive motor (45 kW) with control cabinet with saw blades Location: Germany, near Lake Chiemsee Ijdpfx Aqey Da Iiousau

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Ijdpfx Ajy Au Alsqujau Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, input voltage: 380 V, cutting speed: 6,000 mm/min, total width: 4,850 mm, total length: 10,150 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, cutting current: 260 A, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, type of cooling: water, height adjustment type: electric, input frequency: 50 Hz, Equipment: double-sided, We offer this used Ajan PP15088 AUTO plasma cutting machine, year of construction 2015. Working area: 2000 x 6000 mm Machine type: PP15088 AUTO Construction year: 2015 Input voltage: 380 V Iajdjy Annbepfx Aqueu Phases: 3 Frequency: 50 Hz If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3500x1950x1500 mm Weight 2500 kg Total power requirement 58,5 kw Iaodpfx Aqovz Eh Reuou

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4600x1000x1550 mm Weight 2500 kg Iasdpfx Aevz E Epequju Total power requirement 6,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1500x700x1600 mm Weight 900 kg Total power requirement 0 kw Iaedpfxovz Hgbs Aquju

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1600x1500x1500 mm Weight 1400 kg Total power requirement 12,6 kw Iodpfxjvz Eu Do Aqujau