Code: 0118
Brand: OCMAC
Model: HS 26
Automatic edge bander for application of PVC , melaminic , veneer, and solid wood edges
Technical data:
Panel thickness max mm 60
88iweczvt
Edge thickness 0,4 / 10 mm
Total installed power Kw 7
Feeding speed m/min 13
Glue pot capacity kg 1,5
Composition:
Gluing unit
End trimming unit with 2 motors Hp 0,3 - 12000 rpm
Edge/bevel trimming unit , tiltable 0 -45° with 2 motors da Hp 1,4 - 12000 rpm
Overall dimensions : mm 3500 X 1050 X 1250 h - Weight kg 9... more
Code: 0349
Brand: OCMAC
Model: SHF/550-30
N7w0dck0c
Automatic edge bander for the application of solid edges up to 30 mm of thickness , PVC, veneer, laminate - Technical data : Gluing height from 10 to 60 mm - Strips thickness from 0,3 to 30 mm - Work speed from 7 to 30 mt/' - Beam inclination 15° - Gluing group - End-trimming group with 2 motors - Tiltable edge-trimming group - Automatic spindle moulder group - Sanding group - Bevel trimming group - Frequency converter- Overall dimensions: mm... more
Code: 0089
Brand: BIESSE ARTECH
Djjusar
Model: ERGHO 6 - CE Standard
Automatic edge bander with pre-milling unit unit for application of wood edges, Veneer, Abs, Melaminic, Pvc, and other materials - CE Standard - Technical data: Max panel height mm 45 - Max edge thickness mm 15 - Feed speed max mt/min 20 - Composition: Pre-milling unit with 2 motors 12000 rpm for pre-milling of panel with adjustable infeed conveyor - Gluing unit - Pre-melt unit - End cutting unit at 45° with 2 independent ti... more
Code: 0131
Brand: STEFANI
Wdvvnq2si
Model: MONOBETA 3000
Automatic edge bander for wood edges, veneer, solid wood, PVC, and melaminic - Technical data: Panel thickness mm 60 - Edging thickness mm 25 - Composition: Gluing unit - End trimming unit with 2 motors - Trimming unit - Bevelling unit - Protection cabin - Adjustable feed speed - Motorized upper pressure beam - Overall dimensions: mm 4200 x 1100 x 1700 - Weight kg 2500
more
Code: 0066
Yreaxo
Brand: EBS - ITALY
Model: XB - 23 - CE Standard
Automatic edge bander for Pvc, veneer, melamine, Abs and roll material - CE Standard - Year 2008 - Technical data: Panel thickness min 10 mm / max 45 mm - Min panel length mm 140 - Min working width mm 50 - Feed speed 8 mt/min - Edge thickness min 0,4 mm / max 3 mm - Composition: Gluing group: glue pot Kg. 2 - Absorbed power Kw 3 - End cutting unit: Absorbed power 0,19 Kw - Speed 12000 rpm - Operating pressure 2,2 bar - Trimmin... more
Code: 0222
Cmuqjacxi
Brand: STEFANI
Model: MONOBETA
Automatic edge bander for wood, PVC, melaminic, veneer - Panel height mm 10/ 60 - Max edge thickness mm 22 - Adjustable feed speed mt/min 4/20 - Min panel lenght mm 60 - Technical data: Tiltable gluing unit from 0 to +7 degrees with glue pot capacity kg. 6 - Parallelogram support - Pressure beam adjustable in height with electric centralized lifting - Automatic feeding of edging strips and edging coils - End cutting unit with 2 mot... more
- supply voltage: 3x400 V;
- Power: 5.5 kW / 50 Hz;
- O exhaust pipe: 120 mm;
- Weight (with average equipment): 350 kg;
- Length: 2000 mm;
- Working dimensions:
- Edge thickness min.-max .: 0.4-2 mm;
- Thickness of min.-max: 10-45 mm;
- Min. Workpiece width (* minimum width of the items to be varied depending on the length, height and surface properties of the boards): 70 mm;
- Min. Length of the workpiece: 210 mm;
- Aggregates:
- Feeding rolls from the feed roll;
- Feeding edges from 0.4 to 2 ... more
Stroke: 1, 1kW speed: 11m / min
Adhesive: 1, 9kW
Temperature control via temperature dial control
Adhesive through the sword with pneumatic control
Glue cartridges
Xr0o9bkvs
Workpiece length: min. 140 mm
Workpiece thickness: min. 6 / 45 mm
Workpiece width: mind. 60 mm
To glue er length: mind. 200 mm
To glue height: 51 mm
To glue er thickness: 0.4 to 20 mm
Machine length: 2600 mm
Depth: approx. 1000mm
Connection value: approx. 5, 5kW
Compressed air: 6 bar approx.
Weight: 560kg
more
used Edgebander Hebrock Euro 2000
Ccrfyl0i
year 2003
three phase, 5.8kW
for edges up to 3mm from the roll and
up to 8mm solid strips
maintenance free glue pot
cut off saw
top and bottom trimmers
easy change from radius to chamfer separately for each trimmer more
1900 hours
Mpe0b
Facilities: Melt gluing unit, automatic magazine, quick end-trimming unit for PVC- and solid edges up to 20 mm, preliminary milling unit for solid edge, profile milling unit 2 or 3 mm radius, electropneumatic conversion of the caps unit by phase on straight, electro-pneumatic adjustment milling motor for RADIUS and fine milling, scraping unit for PVC edges, pneumatic adjustment for scraping unit, buffing unit
more
- Pre-milling unit - alignment with two mills (concurrent and counter-rotating - second milling cutter)
- Feeding system of PVC tape
- Feeding system of wooden battens
- Tape cutter - pneumatic
- 1 pre-press roll, 3 final press
- Drill saw - 2 aggregates
- Straight cutters - 2 pieces (with horizontal dividers)
Ptft0a
- Collecting cutters - radial - 2 pieces (with horizontal dividers)
- Cyclones - up / down
- Control - panel with display
- Dimensions of the machine 6100 x 860 x 1370 mm
The machi... more
Length: ca.4m Width: ca.1.1m with plate for plastic edge lipping of 1 - 20 mm flush milling two speeds for banding and chamfer milling right + left to run glue roller machine is fully functional! Sale is made on behalf of customers Availability:
Je3ocxsqw
more
Type: EURO 2000
used machine
edge thickness max. 5mm
9gokp03hq
Workpiece thickness: 8 to 45mm
Feed rate: 9m/min
units
- quick heating
- cutting knife
- End trimming unit
Year of construction: 1993
location: Warehouse / 82281 Herrnzell more
- Edge thickness: 0.5-2 mm
- thickness of boards: 12-40 mm
- temperature of the adhesive: 120-250 ° C
- tank capacity: 1.2 l
8yzkuxofg
- adhesive preparation time: approx. 25 min
- time to change the color of the glue: about 5 minutes
- installed power: 2000 W
- compressed air pressure: 6-8 bar
- dimensions: 1.1 x 1.4 x 1.2 m more
Invisible joints unit for edge banders
SMA-REF-6039
Type: edge range:
Workpiece thickness: max. 65 mm
Edge thickness: depends on edge bander
9 kW
max. 20 fit every modern edge bander
Condition:
ready for action
under power
Location: Southern Germany
Wkrhs
Availability: on demand more
This machine is in very good condition and works like new
Ma2tn
It is a three phase machine for preglued edges
Workpiece widthmin. approx.. 80 mm
Workpiece thickness 10 – 50 mm
Workpiece lengthmin. approx. 220 mm
Edging thickness 0,4 – 2,0 mm
Heat output 3.4 kW
Electrical connection 380V, 50 Hz , 3Ph + N
Total load 6.5 kW
Heat-up timeapprox. 2 minutes
Air connection 6 Bar
Dimensions approx.. 1800 x 700 x 1300 mm without turntable Ø 800
Net weight 260kg more
Melt adhesive tanks max. Edge thickness mm 3 max. Workpiece height mm 50 min. Inner radius mm 8 Feed speed m / min 0 - 7. Ready in minutes approx 6.5 Suspension
Y9u0xm3v3
more
Gluing, milling up the bottom, cutting the back front, grinding aggregate with pneumatic shoe.
- plate width min. 65 mm
- plate length min. 140 mm
- feedrate: 8/11/15 mb / min
Bbsfuyzu
- pressure: 6 bar
- dimensions: length x width x height: 5000 x 900 x 1400 mm
- weight: 1570 kg
- Year of production: 1989 (estimated) more
Type: O KDN210
327sccfns
used machine
edge thickness max. 3mm
Workpiece thickness: 8 to 45mm
Feed rate: 9m/min
units
- quick heating
- cutting knife
- End trimming unit
Year of construction: 2006
location: Warehouse / 82281 Herrnzell more
HEBROCK AKV 3005 DK
Pcv up to 3 mm
guillotine
Glue roller
4 pressure rollers
Cappadocia on 1 aggregate
1-phase milling machine
Milling machine 2 - radius
Gu8ico
Spoofing of corners
Profiled cyclone
Machine in good condition, does not require own contribution in continuous use, purchased in 2010 in Germany, documentation in Polish. more
Edgebander for shaped workpieces
SMA-REF-5528
Type: formatting edge banders
Manufacturer: Hebrock
Model: AKV 88 F
Year: 1998
Working range:
Edge thickness: max. 3 mm
Ekbtesh
Workpiece thickness: 8 - 40 mm
Inner circle: min. 8 mm
Features: for pre-coated edges
Condition:
ready for action
under power
Location: Eastern Germany
Dimensions: Weight: 150 kg
Availability: on demand
Terms of delivery:
ex works
free on truck
Terms of payment: 100% before dismantling/loading more
Type: Karibic
used machine
edge thickness max. 8mm
Workpiece thickness: 8 to 42mm
Feed rate: 12m/min
8d7aqec
units
- quick heating
- cutting knife
- Double-End trimming unit
- shaping unit
- Radius scraper
All units pneumatically adjustable by PLC
Working hours: 198
Year of construction: 1994
location: Warehouse / 82281 Herrnzell more
Edgebanding:
- Manufacturer: Homag
- Year: 1987
- Type: KL 79/02 / Q
- Units: pre-heating elements, power adhesive with storage glue, pneumatic zone pressure edge, Crosscut, milling coarse cutter radial scraper (incomplete), cutter zaowalający (defective), Sander x 4 (2 x side, 2 x edge) polisher
- Accessories: upper pressure elements - the belt, the additional bearing rail for wide elements
- Feed speed: 8-16 m / min
- Max workpiece height: 70 mm
- Length: 14 m
- Weight: estimated to 9 t
3sgnm... more
Homag Single Sided Edgebander
Model KL 79/A20/S2
Year 1998
Pre Milling
End Trim
Btinpxoq
Top & Btm Rough
Top & Btm Fine
Corner Rounding
Scraping Units
Pre Heat Units
Single Coil Feed
more
Single sided edge bander with hot melt, fixed side at the right
Edge thickness: 0,4 to 3 mm
Workpiece thickness: 8 to 42 mm
Min. workpiece width: 70 mm
Feedspeed 12 m/min
Workpiece transport by chain, top pressures with rubber rollers
Sound enclosure over all trimming motors
[...]
Equipment:
Edge magazine, guillotine for 3 mm edges
Hot melt unit
Pressure zone with1 driven and 3 non-driven rollers
End trims, 2 motors of 0,18 kW
Top/bottom fine and radius trimming, tilting, 2 x 0,5 kW
Quick-exch... more
Biesse Akron 435
year of construction 2009
9oug7cwwi
Diamond wire mill 65 mm
glue box
pressure zone
saw
radius resins
Corner rounding
radial scrapers
flat scrapers
Machine was completely revised in 2016. more
Single sided edge bander with hot melt application, fixed side at the right
Edge thickness: 0,4 to 5 mm
Edges from coil: up to 3 x 45 mm
Workpiece thickness: 8 to 40 mm
Min. Workpiece width: 65 mm
Feedspeed 9 m/min
Workpiece transport by chain, top pressures with rubber rollers
7f3acnq0c
Sound enclosure over all motors
[...]
Equipment:
Coil and strip magazine
Hot melt unit
Pressure zone with 1 driven and 2 non-driven rollers
End trims, chamfer and straight, 2 x 0,18 kW motors
Top/bottom trim... more
Edge thickness 0.4-8 mm
Rollentrenn 3 x 45 mm
Workpiece thickness 8-40 mm
Workpiece width of min. 65 mm
Workpiece length of min. 160 mm
Feed up to 11 m / min
Unit Assembly: Quickmelt-gluing unit trimming unit 2 x 2.2 kW; 200 Hz
End trimming unit chamfer/straight 2 x 0.27 kW; 200 Hz; 12 000 rpm, 0-15 ° Swivel range
Flush trimming unit with keying 2 x 0.40 kW; 200 Hz, 12 000 rpm, 0-15 ° Swivel range
Contour trimming unit 2 x 0,35 kW; 200 HZ, 12 000 rpm
Scraping unit (profile,- & fl... more
Manufacturer: Hebrock, Type: AKV 88 D, Min.-max. workpiece height in mm: 8 - 40, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 0 - 7, FREE TEXT: min Innenradius ca. 8 mm,
Q8x8a7xve more
used edge banding machine for high production at 9 units
- Work thickness 60 mm
- Gluing unit with pre-melting
- Grinding unit
- End trimming unit
- Angle trimming unit
- Gleanning unit
- Top and bottom corner rounding unit
Ibjjlo9
- Edge scraping unit
- Blow dryier
- Buffering unit more
Hot melt machine
Panel thickness 8 to 40 mm
Edge thickness from 0,4 to 3 mm
Min. Panel length: 140 mm, min panel width: 60 mm
8oozzv3ie
Equipment:
Edge magazine with guillotine
Glue application with glue roller
Lateral pressure rollers
End trimming unit with 1 motor 0,19 kW
T/B edge trimming unit, motors 0,55 kW
Radius scrapers
Buffing more
DIDN'T FIND ANYTHING SUITABLE?
Save this search now and we will inform you about new machines free of charge!
The Machineseeker trust seal gives buyers the ability to detect whether they have to do it with a trusted seller at a glance.
What do we check?
Check of the trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of the telephone accessibility the main phone number.
Credit report must not contains negative criteria.
Buyer complaints can lead to the withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course occur anyway during the purchase process differences of opinion. Machineseeker and Thorsten Muschler GmbH is not liable for violations of the active Maschinensucher or Machineseeker buyer or seller.
Try our Machineseeker app now! Machineseeker app for iPhone and Android.
+44 (0) 20 806 810 84
+49 (0) 201 857 86 10
+48 (0) 223 076 958
