Auto hacksaw buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
4

Hacksaw - Automatic BEHRINGER Super A-200

Dreieich, GermanyGermany dealership location
6568 km
1982
used
cutting diameter 200 mm band length 350 mm Dkdve9sp8 cutting lenght max. 600 mm cutting range max. 180 x 180 mm dimensions of saw-blade 350 x 35 x 2 mm no. of strokes 52/66/81/104/132/162 Hub/min coolant voltage 380 V total power requirement 3,0 kW weight of the machine ca. 470 kg more
2

Hacksaw - Automatic KASTO PSB 260 AU

Bühl, GermanyGermany dealership location
6593 km
1982
used
cutting diameter 240 mm band length 450 mm cutting lenght max. 750 mm cutting range - square - 240 x 240 mm cutting range - flat - 260 x 180 mm dimensions of saw-blade 450 x 40 x 2 mm Izdymdh total power requirement 3,7 kW weight of the machine ca. 1,1 t - partly overhauled - acc.: 1 sawframe as spare part, various saw blades, coolant more
1

Hacksaw - Automatic KASTO EBS 320A

Stockstadt, GermanyGermany dealership location
6564 km
1963
used
weight of the machine ca.:1200 kg total power requirement:5,5 kW Rczkfmdxi dimensions of the machine ca.:1,8 x 1,67 x 1,30 m cutting diameter: mm band length:575 mm cutting lenght max.: mm max. clamping height:180 mm max. clamping width:350 mm table - height over basement:500 mm saw bow - stroke length:160 mm 100 % before loading warranty: none one used hacksaw, make KASTO, type EBS 320A, year of production 1963, general overhauled in 1972 more
1

Hacksaw - Automatic BEHRINGER KS 251 HY

Göppingen, GermanyGermany dealership location
6699 km
2004
used
cutting diameter unbk. mm band length unbk. mm cutting lenght max. mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m U2hmrd8lm more
4

Hacksaw - Automatic KASTO UBS 240a

Schwäbisch Gmünd, GermanyGermany dealership location
6698 km
1976
used
cutting diameter 240 mm 7cr0ao7ny band length 480 mm cutting lenght max. 8/750 mm total power requirement kW weight of the machine ca. 1,0 t dimensions of the machine ca. 2,35x1,62x1,28 m more

Hacksaw - Automatic COLUMBO BSA 180

Barsbüttel/Hamburg, GermanyGermany dealership location
6495 km
used
:200 mm Ø cutting lenght max.:750 mm Vritzi sawblade dimension :350x35x2 mm motor :380 50 1,4/1,8 V Hz kW hydr. motor :0,55 kW transport motor :0,3 kW coolant pump:0,15 kW range L-W-H:1.850x1.400x1.000 mm machine weight ab.:700 kg The machine is equipped as follows: - continous cutting pressure adjustment - 4 cutting speeds, stroke number 45/62/90/120 min - multiple clamping device - piece counter - coolant system - operation manual available more
2
Hacksaw BEHRINGER, ready! Automatic cutting feed with hydraulic cutting pressure adjustment Cutting area around 245 mm Coolant system in the foot Eayib92b Ssonderpreis SSonderpreis more
5
Jibh8ob cutting range: - 340 mm Ø - 325 x 325 mm - 340 x 280 mm cutting length: up to 600 mm more
6
used Hacksaw -Automatic Manufacturer KASTO Model PSB 240 AU Utjnesmlf Cutiing dia. round = 240 mm Material stroke = 750 mm Saw -Blade = 450 x 40 x 2 mm more


auto hacksaw
daily

New machines via email!

Stay updated!
6

Hacksaw automatic KASTO EBS 340 AU

Beringen / Schaffhausen, SwitzerlandSwitzerland dealership location
6675 km
used
Diameter up to 340mm Saw blade length 600mm Ba7ryjxkat Automatic cutting length max 600mm MARCELS MASCHINEN CH more
1

Hacksaw - Automatic COLUMBO BSA 240

Barsbüttel/Hamburg, GermanyGermany dealership location
6495 km
used
:280 mm Ø cutting lenght max.:750 mm sawblade dimension :450x40x2 mm motor :380 50 1,8/2,6 V Hz kW hydr. motor :0,55 kW transport motor :0,3 kW Uczpdfetw coolant pump:0,15 kW range L-W-H:2.450 1.600 1.000 mm machine weight ab.:850 kg The machine is equipped as follows: - continous cutting pressure adjustment - 4 cutting speeds, stroke number 45/62/90/120 min - multiple clamping device - piece counter - coolant system - operation manual available more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bcv8g39ghl FRIULMAC RANDOMAX EVO DEFECT SAW AND END MATCHER ALL IN ONE -- Automatic defect cutting and end matching machine with: -- 7-1/2 HP (5.5 kw) trim saw -- 1-1/2 HP (1.2 kw) scoring saws -- 8 HP (6 kw) profiling unitsCapacities: -- 8” (200mm) min. to 78” (2000mm) max. length -- 2” (50mm) min. to 15-3/4” (400mm) max. width -- 1/8” (10mm) min. to 1-1/2” (40mm) max. thickness -- Conveyor belt speeds from 30-... more
3
Panhans S45 3.2m Automatic Beamsaw with Tilting Saw Carriage - 2005 CE Cutting length 3200mm Cutting depth 3200mm Cutting height max 60mm at 90 degrees Bczupgru3f Cutting height max 40mm at 45 degrees Main saw motor 7.5kw 350mm dia main blade Saw carriage feed speed 0 - 40m/min variable Pusher fence variable speed 0 - 25m/min forward, 40m/min return Cutting height adjustment with 4 levels Mitre cutting from 0 to 45 degrees Pusher with 5 panel grippers and 2 stops Touchscreen con... more
4

bar automatic lathe TRAUB TK 42

Lüdenscheid, GermanyGermany dealership location
6444 km
1981
good (used)
- max. bar diameter 42 mm - turret with 6 stations - max. turning length 100 mm - 2 horizontal supports - 2 vertical supports - hydro feeding tube STENZEL dimensions LxWxH: Dmjaw9d - machine 2200 x 1200 x 1600 mm, weight 1800 kg - tube 5700 x 600 x 1200 mm, weight 500 kg more
5
saw blade diameter:400 mm cutting diameter:130 mm stroke:150 mm capacity 90 degrees: square:115 mm feeds hydraulic /stepless:0 - 1,5 m/min engine output:2,0 / 2,6 kW saw blade turning speeds:10 + 20 U/min total power requirement:12 A Bu2mipxl dimensions of the machine ca.:1,5 x 1,1 x 1,85 m weight of the machine ca.:1,1 t more
3
cutting diameter 230 mm Hrxjh2hd saw band length 2710 mm cutting width 225 x 225 mm dimensions of saw-band 2710 x 0,9 x 25/27 mm mitter cutting 45 ° cutting speed 28 / 56 m/min power capacity 0,85 / 1,2 kW coolant voltage 400 V total power requirement 1,3 kW weight of the machine ca. 475 kg more
1

AUTOMATIC CNC SHAPER (SHAPE & SAND) UNIQUE 4500

North Carolina, United StatesUnited States dealership location
518 km
2006
used
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Etbidgf UNIQUE 4540 Shape and Sand (CNC) with (4) stations. -- General Description: (4) shaper heads of which (2) can be used for sanding. Ridged one-piece welded steel frame double spindle shaper (CNC controlled jump cope & cope) with two 45° tilting sanding stations. All heads are floating and displaced via rub collars making this machine suitable for shape and sand on pre-hogged arched raised panels. Jump cope on first shaper eliminates tear out o... more
4

Push Fed Automatic Upstroke Crosscut Stromab Matrix

Liverpool, United KingdomUnited Kingdom
5686 km
2004
good condition (used)
Stromab Matrix Push Fed Automatic Upstroke Crosscut - 2004 CE A robustly built range of upstroke crosscutting machines designed for programmable and repetitive cutting from lengths of standard or random length long timber. The saw unit has a pneumatic upstroke action and is fitted with a Matrix type pusher unit for automatic feeding Specification Saw Unit TR500 Self braking motor 10hp Saw blade diameter 500mm Max cutting width (refer to chart)360mm Bcztu9kfzn Max cutting he... more
3

Automatic Punching Press Mubea Mubea VP600

Köln, GermanyGermany dealership location
6416 km
1994
used
pressure: t no. of strokes: Hub/min sheet width:1200 x 750 mm weight of the machine ca.: t :80 mm max. material thickness:20 mm Gvyz7l2x8 min. material thickness:1,5 mm Mubea plate punching machine with coordinate table and CNC control. more
3
bore diameter 26 mm swing diameter 140 mm DIN 52022 Gr. 4 spindle diameter in front bearing 55 mm work height max. 1050 mm turning speed range 205 - 3280 U/min Uqvqibp7u rapid speed 2 m/min feed speeds infinitely variable 0 - 1200 mm/min number of slides 3 total power requirement 3,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,80 x 1,00 x 1,60 m stepped drive, with autom. electro-magnetic speed control for drive with 3 slides, with electrohydr. control acc.: variou... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Ksjzyi3f UNIQUE 313 Automatic Shaper for Miter DoorsMiters the end of (2) cabinet door rails on each [...] & Features: -- Automatic cycle controlled by maintenance-free PLC software for accurate & easy alignment of mitered corners; -- (2) 5 HP Dual-motors for shaping with 1-1/4" spindles. -- (2) Pneumatic clamps hold workpiece on either side while parts are being shaped, unlimited part length. -- 1" Max. part thickness, 4" max. part width. - Staggere... more
2

Horizontal Bandsaws EVERISING 300HB Automatic Horizontal Bandsaw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Gtoxmyxr more
3

PERFECTA Dreimesserautomat CIRCUT F

Espelkamp, GermanyGermany dealership location
6453 km
2004
ready for operation (used)
Legal imports Bcr8zuy7h0 more
8

Tool Presetting Equipment ZOLLER VENTURION 450 PILOT 3 SEMI AUTOMATIC TOO

West Lothian EH54 9HW, United KingdomUnited Kingdom
5581 km
2014
good condition (used)
2014, s/n V4R4C300074, c/w – CNC Automation package, power spindle with auto focus, SK40 and HSK63 reducers/adaptors, manual Balluff System RFID chip system, Data output, Tool management system (Zoller TMS), CAM Interface Hmnn28lj more
1
turning diameter ca. 100 mm turning length 100 mm number of slides 2 spindle hollow 42 mm Uqvp8qkjt face slide travel 55 mm turning speed range max. 5000 U/min greates pass round over bed 240 mm feed speeds 20 - 400 mm/min rapid speed 6 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t range L-W-H 2,80 x 1,20 x 2,00 m with connector field control more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Glvrq9odi US CONCEPT CHB-12 Hauncher/Notcher;The US CONCEPTS CHB-12 Hauncher-Notcher is designed to notch along the edge of the board or across the end. -- Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with & Spec's: -- 40 MM horizontal spindle that moves up hydraulically past the table with the clampe... more
6
Blade diameter (mm) 350 / 400 / 450 Din 8576 Blade lock (mm) 50 / 4 / 14 / 80 40 / 4 / 1 1 / 63 2hdkd7isb Cutting capacity at 45 (without magazine) Circle 100 /125 / 145 Square 90 / 110 / 130 Rectangle 14070 / 16090 / 180100 Working height (mm) 1.050 Machine weight Kg. 2.800 more
15

Horizontal Bandsaws HYD-MECH H10A 10" / 254mm Twin Pillar Automatic Horizontal Bandsaw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. HSA0307115 Capacity Rounds 10"/ 254mm Squares 10" x 10" / 254mm x 254mm Twin Pillar Yes Input 415/3/50 5hp approx Speeds 50-350 sfm Twin vices Yes Stroke of feed vice 24" / 609mm Multi Feed Yes Fitted with Coolant, Variable Downfeed, Bundle Clamp and Swarf Screw. Equipment 10' / 3048mm Roller Tracking Length Machine - 7' / 2133mm. Tracking - 10' / 3048mm Width Machine - 7' / 2133mm. Tracking - 2' 10" 863mm Height Machine - 5' 10" / 1778mm. Tracking - 2' 8" / 813mm Nett weight actu... more
4
cutting diameter 250 mm saw band length 3010 mm cutting width 330 mm 3gtisvayf dimensions of saw-band 3010 x 27 x 09 mm cutting speed 35 / 75 m/min mitter cutting 45 ° power capacity 1,5 kW coolant voltage 400 V total power requirement 2,2 kW weight of the machine ca. 700 kg dimensions of the machine ca. 2,60 x 1,75 x 1,70 m - Fab. No.: 0003000633 more
6
cutting diameter 260 mm saw band length 2660 mm cutting width 400 mm capacity 45 degrees: round 160 mm capacity 45 degrees: flat 160 x 260 mm capacity 45 degrees: square 160 x 160 mm capacity 90 degrees: round 260 mm capacity 90 degrees: flat 400 x 260 mm capacity 90 degrees: square 260 x 260 mm material feed length 500 mm saw band feed 17-120 U/min dimensions of saw-band 2660 x 25 x 0,9 mm drive saw-band 1,5 kW drive hydraulic 0,25 kW total power requirement 1,75 kW weight of the machine ca. 66... more
2

Band Saw - Automatic - Horizontal BTM 560 A

Bühl, GermanyGermany dealership location
6593 km
1999
used
cutting diameter 560 mm saw band length 8020 mm cutting width 1,1 mm capacity 90 degrees: round 560 mm capacity 90 degrees: square 560 x 560 mm dimensions of saw-band 8020 x 1,1 x 54 mm feed length 550 mm feed length: multiple 9999 mm cutting speed 17 - 127 m/min control CEB, SAW III Uqvwqkgcj total power requirement 7,5 kW weight of the machine ca. 7,6 t range L-W-H 4,30 x 2,40 x 2,56 m acc.: roller track 3000 mm, roller track 1800 mm, roller track 850 mm, chip converyor, coolant more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Nccxn UNIQUE 2700 CNC CNC Door ShaperCNC controlled maching center for Raised Panel [...] with: -- (1) CNC controlled 5" stackable vertical spindle (max. 4 tools per stack), 7.5 HP belt driven; max. clamping thickness 2-1/2" and 6" max. cutter head diameter. -- "X" Axis of spindle travels 81" on (2) THK rails with ball screw movement, "Y" axis with 5" travel on THK rails with 5" max. workpiece overhang, "Z" axis with 5" max. travel on THK [...]: -- Wind... more

Soag 6 Position Automatic Heavy Duty Drill

3AD, United KingdomUnited Kingdom dealership location
5845 km
1988
ready for operation (used)
Bcz9ydrr8a more
5
total power requirement:4,2 kW Cnb8uaxs weight of the machine ca.:1,5 t dimensions of the machine ca.:1,5 x 2,5 x 2 m saw band length:4400 mm cutting speed:15 - 150 m/min work height max.:750 mm capacity 45 degrees: round:rechts 330 mm capacity 45 degrees: flat:rechts 320 x 335 mm capacity 45 degrees: flat:links 305 x 335 mm capacity 45 degrees: round:links 305 mm capacity 90 degrees: flat:500 x 335 mm capacity 90 degrees: round:335 mm cutting range 30° flat:rechts 170 x 335 mm Cutting area at ... more
3

Chuck AUTOSTRONG N 210

Mönchengladbach, GermanyGermany dealership location
6371 km
2011
used
diameter:210 mm total power requirement: kW weight of the machine ca.:0,05 t turning speeds:4200 Bore:75 mm clamping diameter:254 mm Gzv3l2atu dimensions of the machine ca.:0,6 x 0,5 x 0,4 m 3-jaw power operating chuck with draw pipe and various jaw sets. more
6
cutting diameter 305 mm saw band length 5620 mm cutting width 305 x 380 mm cutting speed stufenlos 16-90 m/min total power requirement 7,2 kW single feed stroke 10-510 mm multiple stroke until 4590 mm main drive 5,5 kW hydraulic motor 1,5 kW coolant pump 0,12 kW dimensions of saw-band 5620 x 34 x 1,1 mm weight of the machine ca. 3,1 t dimensions of the machine ca. 2,2 x 3,1 x 1,80 m Condition: good Qmo9zdlkm Electric 380 Volt CNC-control Cooling equipment Diverse sawbands Roller con... more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Bbuznox3h7 CAMERON AUTOMATION #37A-12L-R-220 QUICK CHOP Saw Optimization System includes: Saw Frame, Computer, Luminescence Sensor, Servo-Motor, Crosscut Solutions Cut-Off Saw.. -- Size Capacity: 2" X 8" wide max. x 1' to 12' max. incoming board length capacity. Highly accurate Push-Feed Saw, left-hand version (material feeds from right-to-left), 10' infeed. -- Drive/Servo: Equipped with: 7-1/2 HP Arbor motor and mechanical up-cut saw stroking fo... more
9

Automatic cold saw SIMEC MEC 120BM 1LCN

Haaksbergen, NetherlandsNetherlands
6345 km
2004
ready for operation (used)
SIMEC MEC 120BM 1LCN Automatic cold saw for high volume production cutting Blade diameter: 250 / 350 mm Ccskufx Angle range: +/- 60 degrees min. cut capacity : 12 mm round cut capacity : max 100 mm Max cut Lenth 3000 mm Feeder 6000 mm plus more
3
cutting diameter 500 mm capacity 90 degrees: square 500 x 500 mm saw band length 6900 mm dimensions of saw-band 6900 x 38 x 1,3 mm feed length 600 mm feed length: multiple bis 5999 mm cutting speed 18 - 90 m/min height of material-table 700 mm total power requirement 5,0 kW weight of the machine ca. 4,0 t Uqvtq8nz9 dimensions of the machine ca. 3,70 x 2,30 x 2,20 m Accessories: coolant - 2-column-guided - more
6

Bar Automatic Lathe - Multi Spindle TRAUB TB 42

More Traub Tb 42
Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1970
used
number of spindles - spindle passage - mm turning length - mm Hp0w7obwc Accessories: Cross drilling unit, revolver quick drilling unit, curve etching more
1

Hacksaw KASTO

Mönchengladbach, GermanyGermany dealership location
6371 km
1978
used
cutting diameter:250 mm 0vbrqk8l band length:550 mm stroke:300 mm total power requirement:3 kW weight of the machine ca.:1,2 t dimensions of the machine ca.:2,0 x 1,8 x 1,7 m more
6

Automatic Punching Press IMS PHY 45

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
2000
used
pressure 45 t no. of strokes 27/13 Hub/min sheet width - mm Bctbcvrco2 weight of the machine ca. - t more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Dmjlzo2 VOORWOOD A117B Shape And SandFeed through, single-sided Profile Shaper/Sander with CPU readout; feeds from right-to-left;. Specifications: -- 2-3/4" x 2-3/4" Min. part size, 3/8" - 1-1/2" max. thickness, and 1-3/4" max. profile faceEquipped with: -- (3) 5 HP Belt driven Shaping station -- (4) 1 HP - 1,500 RPM Disc sanding stations; 0° - 45° tilting on all units. -- 18 FPM Fixed feed speed, 1 HP feed drive; overhead holddown with (2) rows of t... more
4

shaper Martin T21 mit automatischer Motorbremse

Herrnzell 6, 82281 Egenhofen / Herrnzell, DEGermany
6816 km
1980
good (used)
Type: T21 used machine motor power: 6kW Cp2knc98 speeds: 3000/4500/6000/9000rev / min spindle diameter: 30 mm long tables Year of construction: 1980 Location: Warehouse / 82281 Herrnzell more


auto hacksaw
daily

New machines via email!

Stay updated!

to

to

Edit search
AUTO HACKSAW
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close