Used Hofmann for sale (46)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 7.5 kW (10.20 HP), planing width: 625 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (min.): 5,000 rpm, overall weight: 1,000 kg, 4-knife TERSA cutter head for planer Motor power 7.5 kW Positioning control for the thickness table Segmented infeed roller Segmented pressure bar Feed speeds of 7 + 14 m/min Table extension Planing width 625 mm, chip removal up to 8 mm, planing height 3.5-305 mm Thickness table mounted on four support spindles and with 4-point guidance. Heavily ribbed cast iron table, finely planed Modern control panel ergonomically positioned. Electric thickness table adjustment with LED display. Buttons for adjusting in rapid or slow mode, Adjustment accurate to 1/10 mm; integrated operating hour counter. Electronic starting and braking system. Electronic, wear-free brake for safe stopping of the cutter head. Infeed roller in rubber and two rubber outfeed rollers (high quality, low wear) Segmented pressure bar, rotary knob with scale, for adjusting the pressure (preload) of the outfeed pressure bar Two feed speeds 7 + 14 m/min; electrically switchable, also during planing Thickness hood with carpet support, can be used as a storage area for wood. Dust extraction port Ø 160 mm, to the left (can also be on the right – can be easily converted on site) Air velocity 22 m/s Godpjz Dkftofx Akysbu Integrated tool storage compartment for operating tools and planing knives Electrical equipment according to VDE/EN 60204 with main switch, emergency stop button and 2nd emergency stop button on the discharge side, winding protection, undervoltage protection, contact for controlling the dust extraction, accessories: 1 set of knives installed, operating tools, grease gun, operating manual Weight: approx. 1000 kg CE-compliant, BG-Holzstaubgeprüft No. HM 23001 Workplace-related emission values dB(A) according to DIN 45635 Part 1650 Idle noise approx. 69 dB(A), operating noise approx. 79 dB(A) Workplace-related dust emission value: 0.44 mg/m³

Condition: excellent (used), Year of construction: 2023, Swivel spindle milling machine Gbodoztzntspfx Akyou Manufacturer: Hofmann Type: TFS 107 Year of manufacture: 2023 Swivel range: -45.5° to +45.5° Table: 2,000 x 813 mm Table height: 890 mm Power: 7.5 kW Speed: 1,500 - 10,000 rpm, stepless speed adjustment Spindle diameter: 30 mm / 40 mm Vertical adjustment: 145 mm Tool holder: MK5 Feed: Yes Motor brake: Yes Dust extraction port diameter: 120 mm Weight: approx. 820 kg Included: - Augner stop jaws - 40 mm spindle

Condition: repair required (used), Year of construction: 2000, functionality: not functional, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, overall weight: 1,100 kg, Equipment: documentation/manual, HOFMANN table milling machine, type TF1200, with a sliding carriage on the side and an extendable table support, with electric height adjustment. Unfortunately, the programs on the control unit cannot be saved. Otherwise, the machine is in very good condition. Godpfsz Eztksx Akysbu

Condition: used, Year of construction: 1996, Second-hand machine Gjdpezk Nnpsfx Akyobu Year of manufacture: 1996 Features and technical specifications: - The basic principle of Hofmann machines is their tried-and-tested cast iron construction - Grey cast iron is by far the leader in vibration damping, compressive strength and load-bearing capacity - Milling spindle 30 mm with clockwise and anti-clockwise rotation - Milling stop with stop jaws, central adjustment and single-sided fine adjustment of the jaws - Manual height adjustment with digital display and zero-reset button - Table dimensions: 1200 x 820 mm - Table height: 890 mm - Motor power: 5.0/6.2 kW - Spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm - Height adjustment: 125 mm - Chip extraction connection: 110/120 mm - with Holz Her 2-roller feed mechanism Weight: 850 kg Availability: by arrangement Storage location: 63934 Röllbach

Condition: good (used), overall weight: 300 kg, Hofmann RWNC-300 CNC dividing head / A-axis, including tailstock GHL 4/300 For sale is a robust and highly precise CNC dividing head (A-axis) from Hofmann Mess- und Teiltechnik (Werkzeugsysteme Müller GmbH), including a matching tailstock. This system is ideal for expanding milling machines and machining centers for multi-axis machining. Technical data & equipment details: Manufacturer: Hofmann Mess- und Teiltechnik (Werkzeugsysteme Müller GmbH) Type of dividing head: RWNC-300 Factory number dividing head: 11281 (Hofmann ID No.: 1170-0500-241) Gjdpfx Asz Iv Easkyobu Weight dividing head: 300 kg Type of tailstock: GHL 4/300 Factory number tailstock: 1109 (Hofmann ID No.: 1270-0400-010) Weight tailstock: 85 kg Equipment: Includes a solid counter support (tailstock) with centering point, as well as the associated connection cables and lines. Matching keys/fastening screws are included. Logistics: No shipping. Collection only (delivery terms: EXW Leipzig).

Condition: used, Year of construction: 2018, functionality: unexamined, input current: 10 A, input frequency: 50 Hz, overall weight: 1,200 kg, CNC Shaft Inspection and Balancing Machine Maximum shaft length: 800 mm 230V 50 Hz Gjdpsyhq Nqefx Akyobu L = 1300 mm; W = 1000 mm; H = 1300 mm

Condition: excellent (used), HOFMANN TFS 107 table milling machine – used Tilts on both sides, Height adjustment is electric, Tilting is electric, Milled cast iron table, Extendable support, Finely adjustable fence, Quick-change tool holder for milling cutters, Right/left rotation, Socket for feed ----- Technical data ----- Tilting range: -45.5 to 45.5°, Table size: 2,000 x 815 mm, Working table height: 895 mm, Spindle diameter: 30 mm, Usable length of milling spindle: 120 mm, Max. milling cutter diameter: 240 mm, Max. diameter of recessed milling cutter: 240 mm, Height adjustment: 120 mm, Speeds: 3,000/4,500/6,000/9,000 rpm, Motor: 7.5 kW, Dust extraction port Ø: 120 mm, Dust extraction port Ø at the bottom: 120 mm, Dimensions (L x W x H): 2,000 x 1,300 x 1,300 mm, Weight: 820 kg Quality information: - Milling spindle newly fitted with bearings - Roundness accuracy of the milling spindle checked - Brake checked/replaced Gbjdpoz A Uptsfx Akyeu - Complete basic inspection - Complete basic cleaning - Electrical system checked - Ready for immediate use

Condition: used, mileage: 263,069 km, power: 154 kW (209.38 HP), gearing type: mechanical, fuel type: diesel, color: orange, overall weight: 16,000 kg, empty load weight: 9,840 kg, number of seats: 3, first registration: 06/2002, Year of construction: 2002, operating hours: 10,533 h, Equipment: additional headlights, cabin, hydraulics, Road marking machine: + Hofmann + H75-1000 + Thermoplastic + Electric heater (400V) + Thermoplastic tank with gas heater and hydraulic agitator Gsdpfx Akexal A Ujyebu + Paint and bead spray left / right + Line segment computer + Rear and front warning system + CompAir DLT 0404 compressor with Deutz diesel engine (9,513 operating hours) + Kubota Diesel V1505 drive engine (22,975 operating hours) + Renault Midlum 210 chassis + First registered: 10.06.2002 + 263,069 km; 10,533 operating hours + 3-seater + Manual transmission with reduction gear + Hand throttle Unladen weight: 9,840 kg; permissible total weight: 16,000 kg + 813 cm x 250 cm x 325 cm (LxWxH) Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: used, functionality: fully functional, power: 26 kW (35.35 HP), gearing type: hydrostat, fuel type: diesel, color: white, axle configuration: 2 axles, number of seats: 1, suspension: steel, Year of construction: 2010, operating hours: 1,055 h, Road marking machine: + Hofmann + H16-3 Universal + Year of manufacture 2010 + 1,055 operating hours Gbedpfxez Eipmj Akyou + 2x paint spray guns; 10cm-50cm + 2x glass bead dispensers + 4-cylinder Kubota diesel engine, 36 hp, 1500ccm + Hydrostatic drive + 225l paint tank with agitator, left/right + 70l glass bead container + 2-cylinder compressor, 1000l/min, 6 bar + Protective canopy + Flashing beacon + Sweeper – direction of rotation adjustable + Dipstick + Lighting + 3950mm x 1325mm (lxb) + Municipal equipment, first-hand Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: good (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Hofmann table milling machine, built in 1978, in a heavy-duty industrial design. The machine is equipped with a Holz-Her 3-roller feed unit ETZ and is suitable for a variety of milling operations in carpentry workshops, joineries, and in the furniture and interior design industries. The height adjustment of the milling spindle is conveniently done via a handwheel. The milling jaws can be adjusted manually. Three different spindle speeds allow for adaptation to various milling operations. In addition, the machine is equipped with 3 Aigner rails. Technical data Manufacturer: Hofmann Year of construction: 1978 Milling spindle diameter: 30 mm Spindle speeds: 6,000 / 8,000 / 10,000 rpm Height adjustment: by means of a handwheel Milling jaw adjustment: manual Dust extraction connections: Ø 120 / 140 mm Machine size: approx. 2,700 x 1,100 mm Heavy-duty table and machine construction made of cast iron Equipment Holz-Her 3-roller feed unit ETZ 3 feed rollers Height-adjustable feed unit Manual milling fence 3 Aigner rails Milling spindle Ø 30 mm 3 spindle speeds Handwheel for height adjustment Dust extraction connections Gbsdpfjzvdk Asx Akyeu Accessories as shown in the photos Scope of supply Hofmann table milling machine Holz-Her 3-roller feed unit ETZ 3 Aigner rails Accessories as shown in the photos The machine can be inspected and tested under power by appointment. Transport possible for an extra charge! The machine is subject to differential taxation according to § 25a UStG. The machine will be inspected before sale. For used machines with a year of construction of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: used, Hofmann under-table milling machine Spindle adjustable up and down, and at an angle from -25 to +45 degrees, electrically Interchangeable spindle shank, diameter 40mm Long tables, 270cm with extension Gsdpfx Ajzh E Uaekyjbu Culaga adjustable electrically with AIGNER fences 4-roller feed system Spindle speed continuously adjustable from 1000 to 10,000 rpm 11KW motor Left-right rotation Spindle lock Brake The machine has a new, non-original control system. The milling machine is in working condition and ready for operation.

Condition: ready for operation (used), Year of construction: 1991, Hofmann TFS 1200 tilting table milling machine Year of manufacture: 1991 Machine no.: P127-91-194-695 Motor: 54.7 / 5.7 - 11 / 13.5 Tilting range: -5° to +45° Motor brake Motor: 2 speeds / pole-reversing 6 speed stages: 3 / 4 / 5 / 6 / 8 / 10,000 rpm Right-hand and left-hand rotation Table size: 2000 x 830 mm Milling arbor diameter: 30 mm Milling fence with fine adjustment Height adjustment: manual, with handwheel Tilting adjustment: manual, with handwheel Lateral sliding table for slot and tenon machining Feed device: 3-roller Elu, infinitely adjustable Dust extraction connection: D 2 x 120 mm Gbedpfx Aozmcz Iokyou Space requirement: approx. 2000 x 1600 x 1400 mm Weight: approx. 1000 kg

Condition: used, Year of construction: 1992, Machine cleaned, function tested, partially overhauled. Spindle runout extremely precise, maximum 1/100 mm. Pneumatic hoses, filter pressure regulator, and mist lubricator replaced. Test run carried out. Used machine, excellent condition, premium features with plunge spindle. With this milling machine, both entry and exit milling operations can be performed. This means the milling spindle can be pneumatically controlled to plunge in and out via a table operated by adjustable limit switches. Manufacturer: Hofmann Model: TFS 1200 Year of manufacture: 1992 Machine no.: P127-92-222-723 Motor: 5.0 / 6.2 kW (reinforced) Swivelling range: -5° to +45° Gbedpfjy Ay Dzjx Akyju Motor brake Motor: 2 speeds, pole-changeable 6 speed levels: 3 / 4 / 5 / 6 / 8 / 10,000 rpm Forward/reverse rotation Table size: 2,000 x 830 mm Milling arbor diameter: 30 mm Milling fence with fine adjustment Digital displays for milling fence, diameter, and cutting depth Electric height adjustment Electric swivel adjustment Digital displays for swivel angle and spindle height Extraction connection: 2 x 120 mm diameter Required space: approx. 2,000 x 1,600 x 1,400 mm Weight: approx. 1,000 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, function tested without overhaul, without warranty or guarantee

Condition: used, functionality: fully functional, fuel type: gasoline, Marking machine: + Greggory + Spray nozzle + Roller scraper + Compressor + Honda motor Gsdpfx Aoz Rmkaskysbu Receive email notifications for all newly listed vehicles – sign up for our NEWSLETTER! Errors and typos excepted; subject to prior sale!

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Planing width: 510 mm Motor power: 4.0 kW Motorized table adjustment Gbsdpfxjwx Nilj Akyeu Fine adjustment via handwheel 2 rubber feed rollers

Condition: excellent (used), Year of construction: 2024, Pallet flow rack / flow rack for special load carriers 1.40m x 1.20m, max. 700kg, space for 300 load carriers - used -: Price ex-site: €59,500 (net), including disassembly, etc.! Supplier: Hofmann Fördertechnik GmbH Roller conveyor supplier: Fluxus Solutions GmbH Year of construction: June 2024 Compartment width: FW I: 1,398 mm (bay with one roller conveyor) – 1 bay available Compartment width FW II: 2,798 mm (bay with two roller conveyors) – 2 bays available Buckling length: K I: 292 mm Buckling length K II: 1,300 mm Roller pitch: 156 mm Clamping length (EL): 1,250 mm Pallet type: Steel pallet Porsche, finished goods according to DIN 15155/8 Dimensions: (W x L x H): 1,200 x 1,400 x 930 mm, lengthwise Godpfx Akev Uzgieysbu Storage capacity: at least 200 pallets Pallet weight: max. 700 kg Frame height: approx. 7.99 m Rack height Including load carriers: approx. 8.32 m Depth of rack/channels: approx. 15 m Rack width: approx. 7.34 m Compartment heights: approx. 1.30 m Roller conveyor designed for a special load carrier Dimensions of the laid-out load carrier: 1400 x 1200 mm Weight of the full load carrier: ~660 kg Weight of the empty load carrier: ~220 kg Both full and empty load carriers pass through the rack Other load carriers of different dimensions also pass through the rack Separation at the end of the channel for zero-pressure removal Additional separations within the channel to reduce back pressure Capacity: 300 load carriers 10 load carriers per channel 5 channels per level 6 levels Condition: good - very good Available: immediately Location: 74912 Kirchardt

Condition: ready for operation (used), Year of construction: 1983, Hofmann AHW 600 L Surface Planer Planing width: 600 mm Cutter block with 2 strip knives Table length: 3000 mm Heavy cast iron construction Motor power: 5.5 HP Godpfxsx S Na Rs Akyobu Weight: 1050 kg Cutter block speed: 5000 rpm

Condition: used, Year of construction: 1979, Used Machine Year of manufacture: 1979 Features and technical specifications: - Planing table width: 500 mm - Planing table length: 2,650 mm - Cutter shaft: 2x strip planer blades - Motor: 3 kW - Planing guide can be tilted up to 90° Godpfjzk Nmxjx Akyebu The machine does not have a motor brake and can therefore only be sold for spare parts! Availability: Immediate Location: 63934 Röllbach

Condition: used, Year of construction: 1993, Spindle tiltable: No Gbsdpfewv Ncgjx Akyou Height adjustment: Handwheel Swivel adjustment: - Cutter jaw adjustment: manual Height display: Scale Tilt angle display: - Fence position display: Scale Cutter spindle diameter: 30 mm Speeds: 3000, 4000, 5000, 6000, 8000, 10000 Motor power: 5 / 6.2 kW Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 2600 mm Machine depth: 900 mm Weight: 700 kg

Condition: used, Year of construction: 1994, Used, good condition, top equipment, low operating hours. Equipped with 2 rubber outfeed rollers, segmented infeed roller, electric adjustment. Machine cleaned and lubricated. Planer knives replaced. Test planing completed. Machine is complete with all settings. Manufacturer: Hofmann Model: DH 510-2 Year of manufacture: 1994 Machine no.: 51/2-490-3452 GS wood dust tested Motor: 4 kW Planing width: approx. 510 mm Planing height: approx. 260 mm Segmented pressure bar Segmented infeed roller 2 rubber outfeed rollers Feed rate: 7/14 m/min Number of knives: 2 Knife system: strip planer knives Brück reversible knives Digital height display for planing height Electric height adjustment with handwheel fine adjustment Gsdpfx Aoythclokysbu Extraction connection: D 160 mm Space requirement approx. 1000 x 1000 x 1500 mm Weight: approx. 800 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition as inspected, without warranty or guarantee.

Condition: used, Year of construction: 1993, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Gbsdpfowhuu Eex Akyou Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.3 / 1.8 kW Speed: 1400 / 2800 rpm Holder clamp: manual Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg

Condition: used, Year of construction: 2001, total length: 2,680 mm, total width: 1,200 mm, total height: 2,200 mm, Colour: Grey Empty weight: 950 kg Price: On request Table milling machine Hofmann TFS 1200 Serial no. 127-01204 Year of construction 2001 7.8kW, 16amp, 400V 45 degree tilt adjustable. Aigner guide Feeder - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 127-01204 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 2680 - Table width [mm]: 450 - Tiltable spindle: Automatic - └ Min. tiltability [°]: 0 - └ Max. tiltability [°]: 45 Gbedpfx Aswl I E Ejkyou - Feeding device present: Yes - Brand: Masterwood - Type: Euromeo - Number of wheels [pcs]: 4 - Number of speeds: 2 - Guide present: Yes - Brand: Aigner - Min. spindle speed [rpm]: 3000 - Spindle speed control: Incremental - Transport dimensions: 2680mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), functionality: fully functional, HOFMANN, Type GS-2, Max. disc diameter 600 mm Max. load capacity approx. 150 kg Gbsdpfx Akszwdygjyeu Balancing mandrel length 290 mm Dimensions W x D x H approx. 750 x 350 x 450 mm Weight approx. 30 kg . Special price: EUR 500 net, packaged .

Condition: good (used), functionality: fully functional, Manufacturer: HOFMANN Type: NG-1 Machine No.: 922472 Gbsdszzlnmjpfx Akyju Max. disc diameter: 320 mm Max. loading weight: 20 kg

Condition: reconditioned (used), functionality: fully functional, Planing width 510 mm, planing height 200 mm, manual height adjustment, star-delta switch, feed controlled by 2-speed foot pedal, main switch, emergency stop. Gjdsx E Smmspfx Akyjbu