Used Arburg 221 55 250 for sale (318)

Condition: good (used), 1x used Arburg 370U 500-170 With Multilift Bsdpfxsyym R Ne Aa Dsdb Immediately available!

Condition: good (used), Year of construction: 2002, Selling this machine, immediately available. For further details, see the pictures. Bedpjyym Rpsfx Aa Dedb

Condition: used, Dear Sir or Madam, We offer for sale: Assembly line for inserting a gasket into a jerrycan cap incl. 2 feeder belts (for jerrycan caps and gaskets) Assembly unit as well as carton feeding and finished product discharge conveyors Bdodpfx Aaeyym N Sj Dob

Condition: good (used), Year of construction: 2010, Clamping force: 200 t Screw diameter: 35 mm Shot weight: 141 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 154 cm3 Screw stroke: 160 mm Injection pressure: 2000 bar Bedpowpkfcjfx Aa Djdb Type: Horizontal Drive: Hybrid Equipment: Thermoplastics cylinder cpl. 35 mm high-wear resistance Drive unit w. 11 kW motor and 21.4 l/min capacity SELOGICA 'direct' controller Air blast system 1 with pressure reducer Interface for robot system (EUROMAP 67), 50-pin AED - electrom. dosage drive 9 electr. heating control circuits for mould heating Interface for colouring device 8 free cooling circuits manually adjustable Position-regulated screw

Condition: excellent (used), Year of construction: 2010, operating hours: 91,720 h, functionality: fully functional, Clamping force 150 kN Screw diameter D45 mm Max. injection volume 318 cm³ Mounting plates 688 x 688 mm Bdedpfoyvt R Ijx Aa Deb Total weight 6840 kgs

Condition: excellent (used), Year of construction: 2010, operating hours: 84,854 h, functionality: fully functional, Clamping force 320 kN Screw diameter D60 mm Max. injection volume 664 cm³ Bjdpfeyvt Itox Aa Djdb Mounting plates 1030 x 1030 mm Total weight 17.5 t

Condition: excellent (used), Year of construction: 2016, operating hours: 34,000 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 30 mm, clearance between the columns: 320 mm, displacement volume: 85 cm³, injection pressure: 2,000 bar, injection weight: 77 g, ejector force: 30,000 N, Arburg 320C 500-170 Bsdeyyd Skepfx Aa Dedb Year of manufacture: 2016 Control system: Selogica Operating hours: approx. 34,000h (pump) Screw diameter: 30 mm Shot weight: approx. 77 g/PS Tie bar spacing: 320 x 320 mm Extras: Core pull Color dosing interface Euromap 67 handling interface Air valve Machine weight: 2,200 kg Machines are available! Subject to changes, prior sale, and errors!

Year of construction: 1998, condition: ready for operation (used), Product material: LSR, ejector stroke: 150mm, operating pressure: 250bar, clamping force: 750kN, min. tool installation height: 250mm, opening stroke: 375mm, tie bar spacing X/Y: 320mm/320mm, max. platen dimensions X/Y: 490mm/490mm, max. injection volume: 187.5cm³, injection force: 145kN, max. injection pressure: 1150bar, screw diameter: 40mm. Machine dimensions X/Y/Z: approx. 4000mm/1850mm/2000mm, weight: approx. 3100kg. Including two dosing units. An on-site inspection is possible. Bdjdpfx Aajyx H Hhj Deb

Condition: excellent (used), Year of construction: 2013, operating hours: 19,500 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 45 mm, Very low hours Arburg 570 E 2000-800 moulding machine fitted with Wittmann Primus 16T robot Bdodpfjyxhaijx Aa Dob Arburg 570 E 2000-800 moulding machine specs; Hours = 19,800 Year = purchased new in December 2013 Tonnage = 200 Screw diameter = 45mm Shot weight (g PS) = 291 Wittmann Primus 16T robot specs; Hours = very low Year = purchased new in June 2021 Travel = Z=2000mm, Y=1000mm, X=590mm comes with integrated conveyor and cell panels

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,626 h, clamping force: 100 kN, screw diameter: 25 mm, Hydraulic injection moulding machine manufactured in 2014. This Arburg 470 H 1000-170 features a closing force of 100 tons and a screw diameter of 15/25 mm. It includes a selection unit and a single platen design, with a beam spacing of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 470 H 1000-170 machine we have for sale. Contact us for further details. • Selection unit: yes • Single platen: yes • Beam spacing: 470 x 470 mm • Operating hours: 22,626 h • Electricals: • Operating voltage: 400 V, 3~, 50 Hz • Control voltages: 230 V, 50 Hz; 24 V~ • Motor/heating rated current: 80 / 58 A • Total rated current: 138 A • Total connected load: 75 kW Bdodpsytqlcofx Aa Deb • Condition note: small servo motor problem Additional equipment • Geiger handling (optional)

Condition: new, Year of construction: 2010, operating hours: 72,154 h, clamping force: 800 kN, screw diameter: 25 mm, displacement volume: 54 cm³, ARBURG Allrounder 900 T 800-150 Stock no.: 503576 Manufacturer: ARBURG Model: Allrounder 900 T 800-150 Control system: Year of manufacture: 2010 Operating hours: 72,154 h Technical Data – Clamping Unit Clamping force: 800 kN Tie bar spacing (h x v): 900 x 900 mm Min. mould height: 250 mm Max. daylight between platens: 550 mm Opening stroke: 300 mm Rotary table diameter: 900 mm Ejector stroke: 150 mm Ejector force: 46 kN Centric location, moving platen (D): 90 mm Centric location, fixed platen (D): 90 mm Technical Data – Injection Unit Screw diameter: 25 mm Bsdpfx Aasytd Sps Dodb Shot volume: 54 ccm Injection pressure: 2,500 bar Screw length: 24 l/d Screw torque: 210 N Plasticising rate: 49 g/s PS Free-flow injection rate: 80 g/s PS Dimensions & Weight Machine dimensions (LxWxH): 3.8m x 1.85m x 2.15m Total weight: 5,000 kg Equipment Display text in German 1x air valve Machine with rotary table Machine with water manifold Levelling elements BDE interface

Condition: good (used), Year of construction: 2013, operating hours: 36,163 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, displacement volume: 59 cm³, ARBURG Allrounder 375 V 500-170 Stock no.: 503615 Manufacturer: ARBURG Model: Allrounder 375 V 500-170 Control: Selogica-direct Year of manufacture: 2013 Operating hours: 36,163 h Bsdpfx Aaoytdfio Djdb Technical Data – Clamping Unit Clamping force: 500 kN Minimum mold height: 200 mm Maximum mold height: 550 mm Maximum platen distance: 302 mm Opening stroke: 225 mm Rotary table diameter: 900 mm Ejector force: 70 kN Movable platen centering diameter: 125 mm Tool weight: 230 kg Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 59 cm³ Injection pressure: 2,500 bar Screw length: 24 l/d Screw speed: 35 rpm Screw torque: 210 Nm Number of heating zones: 5 Dimensions & Weight Machine dimensions (LxWxH): 3 m x 1.6 m x 3.48 m Total weight: 3,540 kg Equipment Display language: German Rotary table 1x hydraulic core pull Machine with water battery Machine without material hopper Levelling elements EUROMAP 67 handling interface EUROMAP 73 interface Interface for ejector plate safety

Condition: like new (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, Very well-maintained Multilift V 15, like new! Bdodjywtzvepfx Aa Dob

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,171 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • High wear-resistant version • Sinter-metal check ring • CrN coating on screw and check ring • Suitable for abrasive, corrosive, and high-temperature thermoplastics • Technology level 2 – servo-controlled, dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system: • Touchscreen operation with process editor • 15-inch (38.1 cm) display • Multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: Bodpeyg I Ihofx Aa Djdb • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Hours: 9,171 Additional equipment • None included in the listing • Note: Machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 54,454 h, screw diameter: 25 mm, This Arburg 470 H 1000-170 was manufactured in 2014. A hydraulic injection moulding machine featuring a closing force of 100t and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 75kW. Ideal for precision moulding applications. Contact us for more information about this machine. Bsdpfx Aox D Rcuea Dodb • Screw: 25mm • Operating voltage: 400 V, 3-phase, 50 Hz • Control voltage: 230 V, 50 Hz; 24 V AC • Motor rated current: 80 A • Heating rated current: 58 A • Total rated current: 138 A • Total connected load: 75 kW • Calibration year: 2027 • Optional: Geiger Handling

Condition: ready for operation (used), Year of construction: 2021, clamping force: 1,600 kN, overall weight: 5,900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm Bsdpex D E Dyjfx Aa Dodb • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information Screw Diameter: 400 unit: 35 / 40 / 45 mm Injection Pressure (Max.): 400: 2500 / 2000 / 1580 bar Shot Weight (Max. g PS): 400: 141 / 184 / 232 g Heating Output 400: 9.7 kW | 5 zones Net Machine Weight: 400: 5900 kg

Year of construction: 2007, condition: ready for operation (used), This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine. • Drive technology: • Electromechanical main movements by servo drives: dosing, injection, mold open/close, ejector • Hydraulic movement for nozzle displacement • Thermoplastic processing • Small hydraulic unit with accumulator, 5.5 kW, 10 cm³ pump (Pos 132/22) • Machine platens with centering ring D125 mm (Pos 356/11) • Injection unit (servo-controlled): • Horizontal 400 injection unit • Modular plasticizing unit with central coupling and adaptive temperature control • Plasticizing assembly D25 mm, high wear/corrosion resistance; open nozzle (220/25), flat nozzle tip (300/00), heater band (320/00) (Pos 060/25) • Heater band temperature up to 450 °C (Pos 427/02) • Standard drive coupling, double-flat (Pos 061/10) • Without hopper (Pos 600/06) • Servo-regulated, programmable nozzle contact force (Pos 408/03) • Clamping unit: • Five-point double toggle with servo-electric adjustment • Electric mold height adjustment • Prepared for mounting a linear robot on the fixed platen • Mold protection via ejector position monitoring (Pos 605/05) • Machine feet (Pos 605/03) • Quick coupling for ejector bar (Pos 605/06) • Electric ejector with position control (Pos 381/05) • Programmable hydraulic core for parallel movements (Pos 382/00) • Air blow unit 1 with pressure reducer (Pos 361/01) • Machine cooling circuits, regulated and programmable (Pos 525/02) • Cooling water manifold with 4 manually adjustable circuits (Pos 512/04) • Control, electrical cabinet, interfaces: • Selogica control • Software packages (Pos 555/01–555/07): Extended mechanical cycle controls; Extended movements; Production control; Optimization/Operator assistance; Quality assurance control; Documentation • Temperature-regulated electrical cabinet (Pos 605/07) • Selogica Direct, French language (Pos 131/05) • Flash card reader (Pos 455/05) • Operator authorization by card, Euromap 65 (Pos 455/06) • Acoustic alarm (Pos 457/00) • Additional socket combination with RCD (Pos 444/01) • 12 mold temperature measurement zones (Pos 469/12) • Additional heater band for nozzle (Pos 468/01) • Interface for HB-Therm mold temperature controller (Pos 453/01) • USB serial interface for printer (Pos 454/03) • Robot interface Euromap 67 (Pos 425/05) Bsdpfxjx D Hgvo Aa Dedb • Electrical and mechanical preparation for external robot (Pos 425/02) • Water shut-off valve (Pos 501/01) • Interface for Thermolift dryer (Pos 464/01) • Interface for color dosing unit (Pos 493/00) Additional equipment • Electric conveyor belt, programmable (Pos 412/02) • Sorting flap for separating good/bad parts (Pos 375/00)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 37,049 h, clamping force: 4,000 kN, overall weight: 21,000 kg, This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for precision in plastic injection molding. Contact us for more information about this machine. Clamping unit • Locking force (max.): 150 kN • Opening force (max.): 100 kN / increased: 800 kN • Opening stroke (max.): 700 mm • Mold height (min.): 350 mm • Distance between platens (max.): 1050–1550 mm • Clear tie bar distance: 820 × 820 mm • Mold mounting platens (W × H): 1171 × 1171 mm • Mold half weight (max.): 4500 kg • Ejector force (max.): 100 kN • Ejector stroke (max.): 250 mmHydraulics / drive / miscellaneous • Hydraulic pump drive power: 55 kW • Installed total power: • 4000-2100: 88.9 kW • 4000-3200: 96.2 kW • Color: Plastic-coated structure (light gray / mint green / rapeseed yellow) • Control cabinets: Safety regulation DIN EN 60204 • Socket combination: 1 Schuko + 1 Cekon • Injection unit power supply: 1 × 16 AInjection unit • Effective screw length (L/D): 23/20/17.5 | 70/80/90 | 23/20/18 • Screw diameter (mm): 60/65/70 | 80/90/100 | 60/65/70 • Theoretical shot volume (max., cm³): 792/1078/1407 | 2513/3462/4240 | 1132/1608/2036 • Shot weight (max., g PS): 293/384/1826 | 1255/1469/1860 | 820/1167/1477 • Injection pressure (max., bar): 2500/2000/1530 | 2500/1500/1200 | 2500/2000/1530 • Injection flow rate (max., cm³/s): 294/362/400 | 812/1030/1250 | 312/396/440 • Injection flow rate with accumulator (max., cm³/s): 354/450/502 | 1188/1552/1964 | 375/475/528 • Back pressure positive/negative (max., bar): 350/50 | 350/50 | 350/50 • Screw circumferential speed (max., m/s): 0.38 | 0.28 | 0.28 • Screw torque (max., Nm): 2057/2247/2247 | 6757/80 | 2057/2247/2247 • Nozzle contact force (max.): 110 kN • Nozzle stroke (max.): 600 mm • Heating zones / heating capacity: 6 × 4500 + 3300 | 6 × 5500 + 4300 • Installed nozzle heating: 1000 W | 1250 WDimensions and weights (base machine) • Clearance length: 490 mm • Electrical connection (fuse protection) motor + heating: 250 A Bsdpfxsydpvbe Aa Dsdb • Electrical connection (fuse protection) motor: 125 A • Electrical connection (fuse protection) heating: 50 / 63 A Additional equipment • SEPRO SR AXESS 30 S3 robot (2008)

Condition: ready for operation (used), Year of construction: 2011, operating hours: 68,463 h, screw diameter: 35 mm, This Arburg 470 E 1000-700 was manufactured in 2011. A robust electrical injection moulding machine, it features a closing force of 100 tons and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 78kW, it's designed for efficient performance. Consider the opportunity to buy this Arburg 470 E 1000-700 electrical injection moulding machine. Contact us for more information. • Operating voltage: 400 V, 3-phase, 50 Hz • Control voltage: 230 V, 50 Hz; 24 V AC • Motor rated current: 61 A • Heating rated current: 58 A • Total rated current: 119 A • Total connected load: 78 kW • Calibration (year): 2027 • selection unit: yes • single platen: yes Bdsdpsx D Rndofx Aa Dob • beam spacing: 470 x 470 • Optional: Geiger Handling

Condition: ready for operation (used), Year of construction: 2020, clamping force: 2,200 kN, screw diameter: 70 mm, injection weight: 172 g, This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information. Clamping unit • Distance between tie bars: 570 × 570 mm • Opening stroke: 650 mm • Ejector force: 70 kN • Ejector stroke: 200 mmInjection unit • Injection unit size: 290 • Injection pressure: 2,500 bar • Shot volume: 188 cm³Drive & control Bdsdpjx Nkp Isfx Aa Deb • Drive system: Hydraulic • Control system: ARBURG Selogica

Condition: ready for operation (used), Year of construction: 2016, operating hours: 13,361 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force; extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Screw diameter: 45 mm (without nozzle) • High wear-resistant version; sinter-metal check ring; CrN coating on screw and check ring • Suitable for abrasive, corrosive and high-temperature thermoplastics • Technology level 2: servo-controlled, dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) Bodjyg I Egopfx Aa Dedb • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Hours: 13,361 Additional equipment • None included as listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Year of construction: 2007, operating hours: 88,893 h, condition: ready for operation (used), controller manufacturer: HAITIAN, This Arburg A470 C 1500-400 was manufactured in 2007. It features a Haitian handling system installed in 2022, a protective enclosure, and a conveyor belt for parts storage. With 88,893 operating hours, consider the opportunity to buy this Arburg A470 C 1500-400 hydraulic injection moulding machine. Contact us for more information. Aditional information • Haitian handling system • Protective enclosure • Conveyor belt for parts storage Bodpsx D Rbqofx Aa Dedb

Condition: ready for operation (used), Year of construction: 2010, screw diameter: 25 mm, This Arburg 470 S 800-170 was manufactured in 2010. A hydraulic injection moulding machine featuring a clamping force of 80 tons and tiebar spacing of 470x470 mm. It operates on 400 V 3~ 50 Hz with a total connected load of 76 kW. Consider the opportunity to buy this Arburg 470 S 800-170 hydraulic injection moulding machine. Contact us for more information. • Tiebar spacing: 470x470 Bdodpfex D R Epox Aa Dob • Single platen: Yes • Operating voltage: 400 V 3~ 50 Hz • Control voltage: 230 V ~ 50 Hz, 24 V DC • Motor/heating rated current: 76 / 59 A • Total rated current: 135 A • Total connected load: 76 kW • Optional: Geiger Handling

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s Bedpfjydnigox Aa Dedb • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A

Condition: ready for operation (used), Year of construction: 2014, clamping force: 1,000 kN, screw diameter: 35 mm, injection weight: 132 g, overall weight: 3,650 kg, This Arburg Allrounder 420C 1000-290 was manufactured in 2014. It features a clamping force of 1000 kN, an opening stroke of 500 mm, and a platen size of 570x570 mm. Max shot weight is 132 g. Consider the opportunity to buy this Arburg Allrounder 420C 1000-290 hydraulic injection moulding machine. Contact us for more information. • Opening stroke: 500 mm • Platen size: 570 x 570 mm Bdjdjyglrwepfx Aa Djb • Max. volume: 144 cm³