Used 4 Sided Planer for sale (68,415)

Condition: excellent (used), CATALOGUE NUMBER: 7133 TECHNICAL DATA - max. width of workpiece: 220mm - max. height of workpiece: 120mm Kedpjzrulcjfx Ah Esdt - 5 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 120mm 3) vertical left 120mm; 2 & 3, 11kW 4) horizontal upper 220mm, 11kW 5) horizontal lower 220mm, 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - pneumatic pressure rollers - from above: 4 infeed rollers, toothed, including 2 double rollers - from above: 1 double outfeed roller, smooth, rubber - from below: outfeed roller, rubber - feed on cardan shafts - feed speed adjustment - feed motor 2.2kW - lifting motor 0.25kW - electric adjustment of planing thickness - length of infeed table 1970mm - central lubrication - diameter of dust extraction nozzle 4x120mm, 140mm - dimensions (L/W/H): 3500x1550x1400mm - weight 1750kg ADVANTAGES - with 5 heads - German production - unpainted - used planer, very good condition Net price: 39900 PLN Net price: 9500 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary with higher fluctuations)

Condition: excellent (used), CATALOG NUMBER 7665 Technical data: - Shaft width: 510 mm - Planing shaft (2 knives installed), 4-knife shaft - Maximum thickness of material for thicknessing: 200 mm - Maximum thickness of workpiece on side heads (3-sided): 100 mm – From above: - Anti-kickback fingers - Serrated feed roller - Planing shaft - Pressure beam - Smooth outfeed roller – From below: - Adjustable rollers in lower table: 2 pcs - Guide bar - Lateral pressure from the side – From the rear: Kdodpfx Ahsztqtfe Est - 2 side spindles + pressure units - Spindle height: 100 mm - Maximum spindle spacing: 510 mm - Spindle diameter: 30 mm - Spindle adjustment: left/right - Motor: 2 × 1.5 kW - Two feed speeds - Main motor: 7.5 kW - Extraction port: 2 × 100 mm - Overall dimensions (L/W/H): 1800 × 1250 × 1000 mm - Weight: 1,070 kg ADVANTAGES – Made in Poland – 4-knife shaft – Very good condition – Used planer Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), CATALOGUE NUMBER 7663 TECHNICAL DATA - max planing width 510mm - max planing height 200mm – from above: - feed rollers - toothed infeed roller - pressure rollers, 2 rows - toothed infeed roller - pressure roller - planing roller 510mm, 4-knife, 7.5kW motor - pressure rollers - smooth, outfeed roller - outfeed pressure roller, 2 pcs - smooth feed roller – from below: - pressure roller - adjustable infeed table + slip roller - planing roller 510mm, 4-knife, 5.5kW motor - 2 slip rollers, smooth - side pressure roller – from the rear: Kedpfx Ahjztpmqj Esdt - side spindles 1) vertical right 140mm, 4kW 2) vertical left 140mm, 4kW - spindle diameter 40mm - 4-knife cutter heads fitted, height 120mm - spindles adjustable up/down, right/left - stepless feed rate adjustment - electric table lifting - dust extraction port diameters 3x150mm, 1x110mm - dimensions L/W/H 2300x1700x1700mm - weight 2200kg ADVANTAGES - ideal for processing flooring - electric table lifting - Czech production - used planer, very good condition Net price: 36900 PLN Net price: 8786 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to larger fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 6946 Kdsdpfx Ajzr I Rloh Eet TECHNICAL DATA - Max. working width: 210mm - Max. working thickness: 120mm - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller - Cutterheads on supports - Cutterhead up/down adjustment - Electric adjustment of top cutterhead height - Electric setting of planing thickness - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 8061 TECHNICAL DATA - max width of workpiece: 230mm - max height of workpiece: 130mm - 5 spindles 1) horizontal lower: 230mm, 4kW 2) vertical right: 130mm 3) vertical left: 130mm (spindles 2 and 3), 11kW 4) horizontal upper: 230mm, 5.5kW 5) horizontal lower: 230mm, 7.5kW - all spindles adjustable up/down, right/left - spindle diameter: 40mm - 4 infeed rollers from above, geared - outfeed roller from above, pulling, rubber, smooth - feed on cardan shafts - pressure rollers pneumatically actuated - stepless feed speed adjustment via frequency inverter - feed motor: 4kW - operating pressure: 6-10 bar - electric adjustment of planing thickness - central lubrication of the table - length of infeed table: 1970mm - diameter of dust extraction nozzles: 5x140mm - dimensions (L/W/H): 3400x1660x1600mm - weight: approx. 2500kg Kdjdpfezrgarjx Ah Eot ADVANTAGES – German production, WEINIG brand – 5 heads – DTR documentation – used planer, very good condition Net price: 45900 PLN Net price: 10929 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: reconditioned (used), Number of spindles 8 St. Working width 230 mm Working height 120 mm Weinig Planing and moulding line ----- Consisting of the following individual machines: Item 1: Weinig Profimat 23 E, four-side planer, stock number: 2803 5 spindles + glazing bead saw Item 2: Weinig Uniplan 23, stock number: 2804 Kdodexpn Tuopfx Ah Est Fine and hydroplaner with 2 horizontal spindles Item 3: Weinig RF 15, stock number: 2805 Longitudinal-cross-longitudinal conveyor with workpiece return to the operator Detailed descriptions of the machines can be found under the mentioned stock numbers. (Technical specifications according to the manufacturer, without guarantee!)

Condition: used, Year of construction: 1996, total width: 1,700 mm, total height: 1,650 mm, Colour: Grey Empty weight: 2.500 kg Dimensions (LxBxH): 400 x 170 x 165 cm - Year: 1996 - Documentation available: Yes - CE certificate present: No - Serial number: 123-2001 - Number of spindles [pcs.]: 5 Kdjdpezuayqjfx Ah Est - └ Spindle 1: - - Spindle type: Horizontal spindle - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 120 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 150 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Vertical spindle - - Motor power [kW]: 11 - - Spindle diameter [mm]: 140 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 160 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Vertical spindle - - Motor power [kW]: 11 - - Spindle diameter [mm]: 120 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 160 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Horizontal spindle - - Motor power [kW]: 11 - - Spindle diameter [mm]: 120 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 160 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Horizontal spindle - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 140 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 160 - - Tool present: Yes - Max. planing width [mm]: 260 - Max. planing height [mm]: 120 - Feed table length [mm]: 2470 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 2.2 - Tool type: Standard - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Voltage [V]: 380 - Current consumption [A]: 84 - Fuse [A]: 100 - Power [kW]: 39.0 - Transport dimensions: 4000mm x 1700mm x 1650mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, total width: 2,600 mm, total height: 1,900 mm, Colour: White Empty weight: 6.500 kg Dimensions (LxBxH): 590 x 260 x 190 cm - Details: - └ Description: Gas springs are weak - Year: 1998 - Documentation available: No - CE certificate present: No - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - Min. planing width [mm]: 15 - Max. planing width [mm]: 230 - Min. planing height [mm]: 10 - Max. planing height [mm]: 150 - Feed table length [mm]: 1570 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 5.5 Ksdpjxlthiofx Ah Eodt - Conveyor drive: Cardan drive - Diameter extraction nozzle [mm]: 120 - Options: Automatic feeding system - Feed speed: Automatic - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 24 - └ Feed speed control: Incremental - Transport dimensions: 5900mm x 2600mm x 1900mm (l x w x h) - Transport weight [kg]: 6500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, 1.High-Speed Planer/Moulder WACO MAXI 8 spindles for horizontal splitting, feed speed 20-150 m/min Working width planing: 30-300 mm Working height planing: 10-150 mm Cutting circle- 180-260 mm Operating voltage: - 400 Volts, 50 Cycles Main feed motor - 37 kW Kdsdpfjz Dn R Tsx Ah Eet Frequency concerter - 45 kW 1.Bottom head - 24,5 kW 2.Top head - 30 kW 3.Right side head - 18,5 kW 4.Left side head - 30 kW 5.Right side head -18,5 kW 6.Left side head - 24,5 kW Horizontal splitting: 7.Right side head - 53 kW 8.Left side head - 53 kW Max working width 200 mm Max working height 63 mm Max saw blade diameter 300 - 400 mm Spindle diameter 50 mm Vertical adjustability 10 mm Spindle speed 5.500 v/min Exhaust connection 2 x Æ 160 mm Unit lenght 1300 mm 2. High-Speed Planer/Moulder WACO MAXI 3 spindles for finishing, feed speed 30-300 m/min Main feed motor - 37 kW Frequency converter - 45 kW Feed speed, variable: 30-300 m/min 1.Beading head: 24,5 kW 2.Top head 24,5 kW 3.Rotaplan head 30 kW

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, 1.High-Speed Planer/Moulder WACO MAXI 8 spindles for horizontal splitting, feed speed 20-150 m/min Working width planing: 30-300 mm Working height planing: 10-150 mm Cutting circle- 180-260 mm Operating voltage: - 400 Volts, 50 Cycles Kodpfx Ahsz Dn R Hs Ejdt Main feed motor - 37 kW Frequency concerter - 45 kW 1.Bottom head - 24,5 kW 2.Top head - 30 kW 3.Right side head - 18,5 kW 4.Left side head - 30 kW 5.Right side head -18,5 kW 6.Left side head - 24,5 kW Horizontal splitting: 7.Right side head - 53 kW 8.Left side head - 53 kW Max working width 200 mm Max working height 63 mm Max saw blade diameter 300 - 400 mm Spindle diameter 50 mm Vertical adjustability 10 mm Spindle speed 5.500 v/min Exhaust connection 2 x Æ 160 mm Unit lenght 1300 mm 2. High-Speed Planer/Moulder WACO MAXI 3 spindles for finishing, feed speed 30-300 m/min Main feed motor - 37 kW Frequency converter - 45 kW Feed speed, variable: 30-300 m/min 1.Beading head: 24,5 kW 2.Top head 24,5 kW 3.Rotaplan head 30 kW

Condition: used, Year of construction: 2009, total width: 1,500 mm, total height: 2,300 mm, Colour: Grey Empty weight: 3.200 kg Dimensions (LxBxH): 420 x 150 x 230 cm Fourside moulder Weinig Variomat Year of construction 2009 Serial number: 113680 Kdedewnhh Eepfx Ah Eot 400v, 32kW 64Amp. Min-max working width 20-230mm Min-max working height 8-120mm Max tool diameter vertical spindle 232mm Max tool horizontal spindle (Not on the first) 200mm Input table length 1950mmFeed speed 6-12 m/min Spindle diameter 40mmSpindle speed 6000 U/min 1st spindle, bottom: 5.5kW 2nd & 3rd spindle, left & right: 7.5kW 4th spindle, top: 11kW 5th spindle bottom: 5.5kW Please note: 5th spindle does not work Dimensions: 4000x1400xH1350mm weight 2500kg - Details: - └ Description: Problem with 5th-spindle - Year: 2009 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 113680 - Transport dimensions: 4200mm x 1500mm x 2300mm (l x w x h) - Transport weight [kg]: 3200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Kdsdpfx Ahsyy A Iqs Eot Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...

Condition: not inspected (used), Year of construction: 1993, Number of spindles 6 St. Working width 230 mm Working height 160 mm Feed motor 4 kW Dimensions (L/W/H) 4400 x 1800 x 1500 mm WEINIG Unimat 23 Automatic Planing and Grooving Machine For sale on behalf of a customer Kodpfxjzz Ai Uj Ah Eodt ----- Manufacturer’s Technical Specifications: Working width: 20–230 mm Working height: 6–160 mm Number of spindles: 6 Motor power per spindle: 5.5 kW (7.5 PS) Feed motor power: 4.0 kW (5.5 PS) Spindle speed: 6,000 rpm ----- ----- Planing table length: 2 m 1 adjustment gauge 2 planing heads, 240 mm 3 brake units are defective; these could be reinstalled by an electrician. ----- Additional technical data (former order confirmation) attached ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer—not guaranteed!) All prices listed are net, plus applicable sales tax.

Condition: excellent (used), Catalog number 8107 TECHNICAL DATA - max. width of workpiece 400mm - max. thickness of workpiece (electrically adjustable) 130mm - digital display of material height – top: - pressure rollers (for short workpieces) - twisted feed roller - ejectors - planing roller (spiral) 7.5kW - pressure - smooth, feed metal roller – bottom: - infeed table - planing roller (spiral) 5.5kW - 2 sliding rollers in the bottom table - stepless feed speed adjustment 0-10m/min - electrical height adjustment - lifting motor 0.37kW - feed motor 1.5kW - diameter of dust extraction nozzle 2x130mm - central lubrication - dimensions (L/W/H) 2270x1900x1620mm - weight approx. 2100kg ADVANTAGES - spiral rollers - heavy cast iron machine, top and bottom rollers, both with their own motors - pressure rollers that hold the workpiece firmly and evenly, ideal for short workpieces - excellent condition – used planer, not repainted Net price: 38900 PLN Net price: 9262 EUR, depending on the exchange rate of 4.20 EUR Kdsdpfx Ahszzyq As Eet (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 6674 TECHNICAL SPECIFICATIONS - Max planing width: 150 mm - Max planing height: 130 mm 7 spindles: 1) bottom horizontal, 150 mm, 3 kW 2) right vertical, 130 mm, 3 kW 3) left vertical, 130 mm, 4 kW 4) top horizontal, 150 mm, 4 kW 5) bottom horizontal, 150 mm, 3 kW 6) right vertical, 130 mm, 4 kW - Spindle diameter: 35 mm (all spindles) - All spindles adjustable up/down and right/left - 4 driven toothed feed rollers from above - 4 top rubber outfeed feed rollers - 2 top pressure rollers - Electric planing thickness adjustment: 0.25 kW - Infeed table length: 1970 mm - Central table lubrication - Stepless feed speed adjustment - Feed motor: 1.5 kW - Extraction port diameters: 6x120 mm - Dimensions (LxWxH): 4000x1300x1600 mm - Weight: approx. 3000 kg – German manufacture – 6-head machine – Used moulder/planer in very good condition Net price: 36,900 PLN Kjdjzrla Dopfx Ah Esdt Net price: 8,790 EUR Net price based on 4.2 PLN/EUR exchange rate (Significant currency fluctuations may cause price adjustments)

Condition: excellent (used), CATALOG NUMBER 7186 TECHNICAL DATA - Max. planing width: 510 mm - Max. planing height, double-sided: 170 mm - Max. planing height, four-sided: 100 mm *Top section: - Infeed roller, toothed - Kickback fingers - Feed roller, toothed - Pressure bar - Planing shaft 510 mm, 4-knife (equipped with 2 knives) 4 kW - Outfeed roller, smooth *Bottom section: - Guide rail - Sliding roller – adjustable table with up/down roller - Planing shaft 510 mm, 2-knife 4 kW - 2 smooth, sliding, adjustable rollers *Rear section: - 2 side spindles + pressure unit - 1) right vertical 100 mm 2.35 kW - 2) left vertical 100 mm 2.35 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Manual thickness adjustment - 4 feed speed options - Feed motor 1.5 kW - Overall dimensions (L/W/H): 1940 x 1320 x 1140 mm - Weight: 1330 kg ADVANTAGES – Ideal for processing beams, flooring, etc. – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Ksdpfx Ahoztalqj Ejdt Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, planing width: 500 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,700 rpm, total length of planing tables: 800 mm, total width: 920 mm, total height: 1,140 mm, overall weight: 450 kg, VEBA S500 PLANER | 500 MM | 4 KNIVES | 4.3 kW | 2009 | ITALY | Kdsdpfx Ajz A A Iwjh Est Professional VEBA S500 planer/thicknesser from the renowned Italian company VEBA Meccanica S.r.l. This machine is designed for the precise planing of wooden components to a specific thickness. Its robust, compact design and 4-knife cutterblock make it ideal for use in both carpentry workshops and for the production of solid wood components. Made in Italy, this machine is used and ready for operation. KEY FEATURES: - Renowned Italian brand VEBA - Model S500 - Planing width of 500 mm - 4-knife cutterblock - Traditional knives - Robust construction - 2 feed speeds - Material height range up to approx. 240 mm - Maximum planing depth of 8 mm - Table height adjustment - 2 rollers in the table to facilitate material feed - Machine equipped with CE marking - Year of manufacture 2009 TECHNICAL DATA: - Planing width: 500 mm - Work table dimensions: approx. 500 × 800 mm - Material height range: approx. 4–240 mm - Maximum planing depth: 8 mm - Planing cutterblock: Ø 110 mm - Number of knives: 4 pcs - Type of knives: traditional - Cutterblock rotational speed: approx. 4700 rpm - Feed speed: 6.5 / 13 m/min - Table rollers: 2 pcs - Height adjustment: electric and mechanical MOTOR / POWER SUPPLY: Motor power: 4.3 kW Voltage: 400 V Power supply: 3 phases DIMENSIONS AND WEIGHT: Machine dimensions: approx. 1000 × 920 × 1140 mm Weight: 450 kg – according to the nameplate We invite you to test the machine on-site. Financing options available through leasing or installment plans. WE ORGANIZE TRANSPORT.

Condition: excellent (used), functionality: fully functional, planing width: 630 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,500 rpm, total length of planing tables: 1,250 mm, total width: 1,050 mm, total height: 805 mm, overall weight: 1,000 kg, SCM S 63 PLANER – 630 mm | 4 KNIVES | 5.5 kW | JBS MACHINES! Professional SCM S 63 planer with a planing width of 630 mm. Kdsdpfsz A Apzex Ah Ejt Robust, industrial-grade construction designed for precise wood processing. A machine for carpentry workshops, production facilities, and demanding users seeking a reliable machine with a large working width, rather than a lightweight design intended for occasional use. SCM is a renowned Italian manufacturer of woodworking machinery. The S 63 model features a rigid construction, a large worktable, and a 4-knife cutterhead, making it ideal for daily woodworking tasks. KEY ADVANTAGES: - Planing width up to 630 mm – allowing for the processing of wide workpieces - 4-knife cutterhead (traditional knives) - 7.5 kW motor – suitable for professional use - Robust SCM construction – machine designed for workshop use - Adjustable feed rate via lever - Large worktable - Construction ensuring stability during operation - Ideal machine for carpentry workshops, furniture, door, stair, and wood element production TECHNICAL DATA: - Manufacturer: SCM - Model: S 63 - Planing width: 630 mm - Maximum planing height: 240 mm - Minimum planing height: approx. 3 mm - Cutterhead: 4-knife - Number of knives: 4 pcs. - Cutterhead speed: 4500 rpm - Feed rate: 6 / 9 / 12 / 18 m/min - Motor power: 7.5 kW - Power supply: 380 V - Table dimensions: 630 × 1000 mm MACHINE DIMENSIONS: - Length: 1250 mm - Width: 1050 mm - Height: 805 mm Weight: 1000 kg WHY IS IT WORTH IT? If you are looking for a real workshop machine with a width of 630 mm that will allow you to process larger workpieces, the SCM S 63 is a solution worth considering. This is not a small, lightweight planer for occasional use. The large working width, heavy-duty construction, and 4-knife cutterhead make this machine an excellent choice for a facility that needs efficient wood processing. Machine available for immediate delivery. Before purchasing, you can view and test the machine. Please contact us – we will be happy to provide additional information about the machine, transport, and loading options. It is possible to test the machine on-site. Financing options available through leasing or installments. WE ORGANIZE TRANSPORT. WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: used, Four-side planer Kedpfslc Id Isx Ah Eedt

Condition: good (used), Year of construction: 1990, Four-side planer REX HOMS-310 AD - German production - year of production 1990 - for wet wood TECHNICAL PARAMETERS: - planing width max. 310 mm - planing height on both sides 300 mm - planing height on four sides 100 mm - 35 mm spindle diameter Kedpfohikplsx Ah Eodt - 2 x 11 kW shaft motors power - spindle motor power 2 x 7.5 kW - feed speed adjustable on the variator - feed speed 6-36 m / min - four upper pulling shafts - two lower pulling shafts - four auxiliary rollers in the table top - brake - minimum length of the element 600 mm Machine dimensions: - length 290 cm - width 170 cm - height 210 cm - weight ~ 3500 kg

Condition: good (used), Year of construction: 2000, Leadermac LMC 523 Smartmac four side planer - year of production 2000 - DTR - electronic height and width adjustment - possibility to save permanent parameters TECHNICAL PARAMETERS: - planing width 230 mm - planing height 140 mm - diameter of the spindles 40 mm 1 lower spindle 7.5 kW 2 right spindle 5.5 kW 3 left spindle, 5.5 kW 4 upper spindle 7.5 kW 5 lower spindle 7.5 kW smoothly adjustable feed 3 kW feed motor power electronic height adjustment electronic adjustment of the left head feed on cardan shafts five top steel pull rollers two upper rubber pulling rollers one role in the table top pulling pneumatic material pressure minimum material length 400 mm length of the preliminary table 2000 mm chrome tables stub diameter 5 x 125 mm Kdjdpfx Aheifftxe Eot Machine dimensions 370 x 200 x 190 cm weight ~ 3000 kg

Condition: used, Year of construction: 1998, total width: 2,220 mm, total height: 1,900 mm, Colour: Beige Empty weight: 4.200 kg Dimensions (LxBxH): 450 x 222 x 190 cm - Year: 1998 Kdedpfxsxr U Nuo Ah Eet - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 83929 - Number of spindles [pcs.]: 5 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 180 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 140 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 180 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Horizontal spindle - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 180 - └ Spindle 5: - - Spindle type: Horizontal spindle - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 200 - Max. planing width [mm]: 240 - Max. planing height [mm]: 220 - Feed table length [mm]: 2480 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 4 - Tool type: Tersa - Conveyor drive: Cardan drive - Diameter extraction nozzle [mm]: 135 - Options: Quick-change system - Feed speed: Manual - Voltage [V]: 400 - Current consumption [A]: 107 - Fuse [A]: 125 - Power [kW]: 49.0 - Transport dimensions: 4500mm x 2220mm x 1900mm (l x w x h) - Transport weight [kg]: 4200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, total width: 3,580 mm, total height: 1,840 mm, Colour: Grey Empty weight: 3.500 kg Dimensions (LxBxH): 180 x 358 x 184 cm - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 106992 - Number of spindles [pcs.]: 5 - └ Spindle 1: Kdodpezguqzefx Ah Eet - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 30 - - Max. planing block diameter [mm]: 130 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.5 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 7.5 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 7.5 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Tool present: Yes - Max. planing width [mm]: 240 - Max. planing height [mm]: 130 - Feed table length [mm]: 1780 - Feed roller diameter [mm]: 130 - Feed motor [kW]: 3 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Feed speed: Manual - └ Max. feed speed [m/min]: 4 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 88 - Fuse [A]: 100 - Power [kW]: 41.0 - Transport dimensions: 1800mm x 3580mm x 1840mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total width: 3,900 mm, total height: 1,800 mm, Colour: Grey Empty weight: 4.200 kg Dimensions (LxBxH): 190 x 390 x 180 cm - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 90-58-07 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 200 - └ Spindle 2: - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 200 - └ Spindle 3: Kdodpfxswnh U Ee Ah Est - - Motor power [kW]: 15 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 200 - └ Spindle 4: - - Motor power [kW]: 15 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 200 - └ Spindle 5: - - Motor power [kW]: 11 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 200 - └ Spindle 6: - - Motor power [kW]: 15 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 200 - Max. planing width [mm]: 240 - Max. planing height [mm]: 120 - Feed table length [mm]: 1440 - Feed roller diameter [mm]: 1400 - Feed motor [kW]: 5.5 - Diameter extraction nozzle [mm]: 150 - Options: Powered rollers in table - Feed speed: - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 35 - Voltage [V]: 400 - Current consumption [A]: 128 - Power [kW]: 80.0 - Transport dimensions: 1900mm x 3900mm x 1800mm (l x w x h) - Transport weight [kg]: 4200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1980, total width: 3,350 mm, total height: 1,500 mm, Colour: Grey Empty weight: 3.000 kg Dimensions (LxBxH): 160 x 335 x 150 cm Price: On request 1e as: Single saw 2e as: Upper Kedpfjwnh Uxjx Ah Ejdt 3e as: Lower 4e as: Multibladesaw - Year: 1980 - Documentation available: No - CE certificate present: No - Serial number: 10517 - Number of spindles [pcs.]: 4 - Max. planing width [mm]: 620 - Feed table length [mm]: 1070 - Diameter extraction nozzle [mm]: 110 - Transport dimensions: 1600mm x 3350mm x 1500mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels