Four side planer Leadermac

Leadermac LMC 523 Smartmac

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Leadermac SMARTMAC LMC 523S Four-Sided Planer Manufacturer: Leadermac, Taiwan S/N 092323 Year of Manufacture: 07/2003 In good condition Working width: 230 mm Working height: 125 mm 5 spindles, spindle diameter: 40 mm Feed table: 2000 mm Configuration: 1st lower horizontal spindle: 7.5 kW 2nd right spindle: 5.5 kW 3rd left spindle: 5.5 kW 4th upper horizontal spindle: 7.5 kW 5th lower horizontal spindle: 7.5 kW Continuously adjustable feed rate up to 24 m/min Hedpjwft Ufofx Ag Iofg 3 kW feed motor Electronic height adjustment Electronic adjustment of the left head Feed on cardan shafts Five upper steel rollers Two upper rubber rollers One roller in the table top feed Pneumatic material pressure Minimum material length: 400 mm mm Chrome tables Chamber diameter 5 x 125 mm Machine dimensions L x W x H = 370 cm x 200 cm x 190 cm Weight 3500 kg CE marking

Condition: good (used), Year of construction: 1995, functionality: fully functional, Used dipping plant, manufacturer Wichmann, type WH 6.0 - 6.0 m long x 1.75 m wide x 1.75 m high, clear internal dimensions; - Year of manufacture: 1995; - Control via SPS Moeller PS4 with program selection; - Wooden support approx. 5 m long, hold-down device approx. 5 m long with frame; - Double-walled with leakage sensor; - Internally partially rusted; - Transport dimensions: approx. 7.50 m long, 2.44 m wide, 2.98 m high (with guide rails removed); Hedpfx Aex Akq Njg Iofg - Weight approx. 10.0 tons; - Plant empty, loaded onto truck free of charge.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0803024, planing height: 130 mm, spindle diameter: 50 mm, planing width: 230 mm, spindle speed (max.): 6,000 rpm, The machine is provided free loaded. TECHNICAL DETAILS Max. workpiece dimensions: 130 x 230 mm Thickness: 10 to 130 mm Width: 15 to 230 mm Minimum length, single piece: 600 mm Minimum length with universal lantern: 760 mm Maximum cutting depth: 10 mm Spindle speed: 6,000 rpm Spindle diameter: 50 mm MACHINE DETAILS Dimensions & Weight Operational dimensions (W x H): 3,000 x 2,250 mm Dimensions: 5,100 x 2,000 x 1,810 mm Weight: 4,300 kg General power supply: 400 V, three-phase + N, 50 Hz Installed power: 53 kW Current consumption: 95.6 A EQUIPMENT Five tool holders with reinforced motors Chrome table 3.00 m Soundproofed and secured covers with gas pressure springs Digital counters (type Siko) for precise manual adjustment Control panel elevated and operator-side Infeed table made of cast steel (L x W): 2,980 x 255 mm Side-mounted, spring-loaded feed unit Digital chip removal indicators Five spindles with detailed power distribution Pneumatic pressure rollers Smooth and knurled steel rollers Smooth steel roller at the outfeed Hjdpfx Asxa Dzisg Iofg Overhauled and mounted knives Operating manual List of spare parts and circuit diagrams

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 092323, feed rate X-axis: 24 m/min, working width: 230 mm, spindle diameter: 40 mm, working height: 125 mm, number of spindles: 5, TECHNICAL DETAILS Working width: 230 mm Working height: 125 mm Spindle diameter: 40 mm Infeed table: 2,000 mm Hjdpfx Ajxuqm Usg Iefg Feed speed: 24 m/min Feed motor power: 3 kW Minimum material length: 400 mm Spindles Number of spindles: 5 Lower horizontal spindle power: 7.5 kW Right spindle power: 5.5 kW Left spindle power: 5.5 kW Upper horizontal spindle power: 7.5 kW Second lower horizontal spindle power: 7.5 kW MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 370 cm x 200 cm x 190 cm Weight: 3,500 kg Electrical Data Voltage: 380 V Frequency: 50 Hz Phases: 3 EQUIPMENT Continuously adjustable feed Electronic height adjustment Electronic adjustment of the left head Feed via cardan shafts Five upper steel rollers Two upper rubber feed rollers Roller in the table feed Pneumatic material pressure Chromium tables CE marking

Condition: new, Year of construction: 2024, Magnetic separator for chip transport line Hfjdpfx Agecqvhwe Iog Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Location: From stock 54634 Bitburg - available immediately -

Condition: used, machine/vehicle number: 4/14242, Frank Floor Sanding Machine FSR used Engine power: 0,75 KW Voltage: 230 Volt Hodob Auu Rjpfx Ag Iefg 5 amps, 50 Hz, Machine no.: 4/14242 Dust bag Location: Ex warehouse Bitburg

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles Hsdpfx Agjrigxyj Ijfg feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Year of construction: 1988, condition: repair required (used), mechanisation for planer infeed -For lengths up to ca. 13 m -Ideal unit for KVH (solid construction timber)and BSH (laminated beams) in front of the planer -1 operator -lateral destacking unit -separation Hjdpfx Aovbtpog Isfg -4 cross cut saws -cutting cross section 180x220 mm, 150x300 mm

Condition: new, Year of construction: 2024, Working width: 600 mm Hedpsug Ty Hjfx Ag Iefg Working height: 150 mm Units: 4 brush units separately adjustable 1st unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with a 3 kW motor 2nd unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with one 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive 4th unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: electric Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Motor power feed: 0.37 kW Machine length: Machine width: Weight:

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm Hfodpfx Agsh Nvyze Isg -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg