Used Hand Planer for sale (9,590)

Condition: new, Virutex hand planer. Especially for left and right hand use Long version for 100 % straight work. 990 W, 12,500 rpm. Ljdpfx Aeum Skxsiijrn Incl. side guide 2 pieces in original packaging

Condition: new, Hand planer Virutex CE 20 J Universal machine for left and right operation. 750W 13000 rpm. Ledpfx Ajum Smyjiiorn With quick depth adjustment. In original packaging. 1 piece

Condition: as good as new (ex-display), functionality: fully functional, Panel saw ALTENDORF HAND GUARD TwinFlex edition with 12" touchscreen, double sliding table, swiveling on both sides, parallel fence with manual adjustment, parallel fence with fine adjustment, control panel at eye level, swiveling, dimension input via touchscreen, F 45 ElmoDrive control system, electric height adjustment, electric swivel adjustment, AKE tool clamping system, automatic correction of the cutting height when the saw head is swiveled, simple axis calibration, machine diagnostics, operating hour counter, USB interface, dust-protected ----- Technical data ----- Swivel range: 0 - 46 °, cutting length: 3,000 mm, cutting width: 1,000 mm, max. saw blade diameter: 450 mm, max. saw blade overhang: 150 mm, angle stop with fixed position: 90 °, manually adjustable via measuring scale: 3,200 mm, speeds: 3,000 / 4,000 / 5,000 rpm, motor power 400 V: 7.5 hp / 5.5 kW, screen size: 12", machine height: 91 cm Lodpfxjzgwl Ij Aiisrn Optical protection system: Two cameras collect data for hand recognition from a wide area around the saw blade. As soon as intruding hands are detected, the saw head is rapidly lowered and stopped within a quarter of a second. TWINFLEX EDITION - Double sliding table 3,000 mm - Saw blade overhang 150 mm - Motor power VARIO 5 kW (6.8 hp) - Swiveling on both sides - Angle miter stop DIGIT LD, cutting length up to 3,200 mm - CNC parallel fence, cutting width 1,000 mm - On/off switch on the double sliding table - Template holder - Additional cost for motor power 6.5 kW (8.8 hp) ALTENDORF with VARIO, for swiveling on both sides - Scoring unit 2-axis, 2-sided, ALTENDORF with motorized height and side adjustment Scoring blade height programmable - Rapid lowering and lifting, - Drive motor 0.75 kW (1 hp), 8,200 rpm - Scoring system RAPIDO 180 mm ALTENDORF for swiveling on both sides - LED lighting on the scoring unit ALTENDORF - Double sliding table 3,400 mm, ALTENDORF - CNC parallel fence, 1,300 mm, ALTENDORF - Camera arm, swiveling out of the way ALTENDORF - Front support roller ALTENDORF Width 300 mm - Air cushion table ALTENDORF - Table extension 840 mm ALTENDORF with air cushion - Version HandGuard 2025 new The machine is sold with a new warranty of 1 year. The machine can be purchased at a special price. We would be happy to make you an offer.

Condition: as good as new (ex-display), JUNE OFFER: -10% on all welding equipment throughout June. We offer welding equipment in various configurations and always have several sets in stock. CMT / ROBOT / CMT hose packages, UNIVERSAL or HOLLOW WAVE robots. Everything is in stock and immediately available! Don’t hesitate and request your individual configuration! We also have a wide variety of spare parts in stock – discounts of 30%, 50%, and 70%. Just send a short email, call, or use WhatsApp. CMT equipment at 1/3 of the new price! - 66% DISCOUNT ALL EQUIPMENT CAN BE INSPECTED IN VIENNA and purchased without waiting! The prices quoted are all from ... Euro. The prices/offers are individually tailored to the equipment configuration. .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) .) Fronius VR CMT wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package CMT robot .) Fronius RCU 5000i Example images of the item. Please see the numerous YouTube videos on the topic of CMT! Ledjhzhynopfx Aiiorn Also reachable via WhatsApp and Viber. In stock in Vienna 1230. Shipping on a pallet is possible for an additional charge: Austria approx. 180 Euro Germany approx. 230 Euro Europe on request All prices are ex-price. You can configure the equipment with us. Robot or handheld device. Long or short connection hose package. Various hose packages to choose from. Synchro pulse. 270, 400 or 500 amp equipment in stock. CMT version available as handheld or robot. It is best to call us, we will discuss your area of application, and you will receive an initial price estimate from us.

Condition: excellent (used), Year of construction: 1994, 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm. Lsdpfx Ajl Dw Nxeiiern

Condition: refurbished (used), Hand corn cutters 10 pcs for sale - Type: A&K Lsdpfsyxnqbjx Aiijrn - Second-hand, refurbished - Includes 1 new cutterhead - Without knives FCA Debrecen

Condition: new, Year of construction: 2025, Hand pallet truck 2000 kg LWPW with weighing system, new 2025. Continuous stock, see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a variable stock of machines, trucks, trailers, and attachments. All deliveries are offered at trade prices in AS-IS condition without warranty. (see our general terms and conditions) For a viewing and/or test drive, you can schedule a non-binding appointment. Please call in advance, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Lrsdpjx Td Dtefx Aiisn

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm Lrsdpfx Aji Apuhoiijn - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: new, Year of construction: 2023, functionality: fully functional, CHILLER UNIT 290 kW – 2 separate refrigeration circuits, shell-and-tube heat exchanger, R32 Cooling capacity: 290 kW at 7/12°C and 35°C ambient temperature Shell-and-tube evaporator for efficient heat transfer and compact design Low-GWP refrigerant R32 Four compressors in two separate refrigeration circuits for high operational reliability and flexible load distribution Low-noise design thanks to optimized sound insulation Completely framed compressor enclosure for efficient protection, easy maintenance, and reduced noise emission Winter package allowing operation at ambient temperatures down to -20°C Lrjdpou Au I Tefx Aiion Ideally suited for industrial processes.

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: 2010016, functionality: fully functional, planing width: 300 mm, rotational speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 9 units Spindle 1 (bottom) Motor power: 11 kW Diameter: 50 mm Speed: 6,000 rpm Tool available Spindle 2 (right) Motor power: 11 kW Diameter: 50 mm Speed: 6,000 rpm Tool available Spindle 3 (left) Motor power: 11 kW Diameter: 50 mm Speed: 6,000 rpm Tool available Spindle 4 (top) Motor power: 15 kW Diameter: 50 mm Speed: 6,000 rpm Tool available Spindle 5 (right) Motor power: 11 kW Diameter: 50 mm Speed: 6,000 rpm Tool available Spindle 6 (left) Motor power: 11 kW Diameter: 50 mm Speed: 6,000 rpm Tool available Spindle 7 (top) Motor power: 11 kW Diameter: 50 mm Speed: 6,000 rpm Spindle 8 (bottom) Motor power: 15 kW Diameter: 50 mm Speed: 6,000 rpm Tool available Spindle 9 (universal) Motor power: 11 kW Diameter: 50 mm Speed: 6,000 rpm Tool available Lrsdpszdy Tpsfx Aiien Min. planing width: 20 mm Max. planing width: 300 mm Min. planing height: 10 mm Max. planing height: 200 mm Min. feed rate: 6 m/min Max. feed rate: 36 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 7,100 x 2,200 x 1,900 mm Empty weight: 12,000 kg Transport packages: 1 unit EQUIPMENT CE marking CE certificate User manual Operating system Technical data Electrical wiring diagrams Tool for spindles 1-6, 8, 9

Condition: used, mileage: 77,000 km, power: 92 kW (125.09 HP), first registration: 01/2016, fuel type: diesel, color: red, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, central locking, soot filter, Now chat via WhatsApp: Quick and easy contact with our sales advisor. Attention! Sale preferably to commercial customers. Ljdpfxozgz D Ie Aiijrn Internal ID number: [3070] ----Optional extras available: * 12–64 month warranty (valid throughout the EU) * New service inspection * New MOT & emission test * Nationwide delivery * Financing available, also with no down payment ----Vehicle highlights: * 19% VAT deductible * 1 owner * German vehicle * Accident-free * Immediately ready for use Special equipment: Storage package, audio system: radio with Bluetooth and Plug & Music, wooden floor in the cargo area, full wheel covers, spare wheel with road tires, lashing eyes on the side in the cargo area Further features: Overhead storage shelf, driver’s airbag, electrically adjustable and heated exterior mirrors, outside temperature display, brake assist, tachometer, electronic brakeforce distribution, 150 A generator, rear wing doors without windows, interior pollen filter, body/build: standard high-roof panel van, fuel tank: 105 liters, cargo partition, height-adjustable steering column (steering wheel), model update, engine 2.3 L - 92 kW dCi diesel CAT, wheelbase 3,682 mm, smoker package, low emissions according to Euro 5 standard, gear shift indicator, sliding door loading/passenger compartment right, side protection strips, seat upholstery: fabric, seats in cab: driver’s seat height adjustable, lashing eyes in cargo floor, heat-insulating glazing, permissible gross weight 3.30 t ----Looking for leasing or financing? We offer attractive options – also possible with no down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. ----Notice: All information on the internet is non-binding and serves only for general vehicle description. Errors, mistakes, and prior sale reserved. The binding specifications of the vehicle result exclusively from the purchase contract on site or through written assurances. Vehicles with a mileage over 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: used, mileage: 350,000 km, power: 100 kW (135.96 HP), first registration: 07/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,000 mm, loading space length: 3,500 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat via WhatsApp now: Contact our sales advisor quickly and easily. Attention!!! Preferential sale to business customers only? Internal ID number: [3314] ----Optional packages available: * 12 to 64 months warranty (valid EU-wide) * New service inspection * New TÜV & emissions test * Nationwide delivery * Financing available, even without down payment * Spring offer: On request and for a surcharge of only €999: Increase of towing capacity up to 3,500 kg (depending on vehicle and manufacturer). ----Vehicle Highlights: * 19% VAT deductible * Regularly serviced * German vehicle * Ready for immediate use * Euro 5 standard * Refrigeration: Waeco Frigo (down to -20°C) * Cargo area: Deep-freeze insulation * Long wheelbase * Reversing camera * Automatic air conditioning * Tow bar * Bluetooth multimedia system Lsdpjy E Ekrefx Aiiorn * 3-seater Special equipment: Driver/passenger airbag, Audio system RSD 2000 (front speakers), BlueMotion Technology, Electrically adjustable and heated exterior mirrors, Wooden floor with aluminum strips at side door entry in cargo area, On-board toolkit and jack, Driver assistance system: Hill Start Assist, Driver assistance system: Front and rear parking sensors, Driver cabin interior lights: front reading lights (2), Adjustable steering column (steering wheel), Side marker lights, Double passenger bench seat in cabin, Rear step integrated into bumper, Lashing rails in load compartment (side walls and roof frame) Further equipment: Storage: shelf/compartment above windscreen, Driver airbag, Traction control (ASR), Rear right entry handle, Driver assistance system: Brake Assist (HBA), Rear wing doors without windows, Bodywork: Standard box van, Body variant: normal roof, Fuel tank: 75L, High solid partition (no window) in cargo area, Facelift model, Engine: 2.0-litre - 100 kW TDI, Parking light function, Wheelbase: 3,665 mm, Tire repair kit, Low emissions according to Euro 5, Right-hand side loading/passenger area sliding door, Seat trim/upholstery: fabric, Cabin seats: driver's seat height adjustable, Front stabilizer, Steel wheels 6.5x16, Permissible total weight: 3.50 t, Additional brake light ----Leasing or financing needed? We offer attractive options — financing possible even without down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening Hours: Mon–Fri: 9:00–18:00 Sat: 9:00–14:00 ----Note: All information provided online is non-binding and serves for general vehicle description purposes only. Errors, typing mistakes, and prior sale reserved. The binding condition of the vehicle is determined solely by the purchase contract on site or by written confirmation. Vehicles with a mileage over 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: used, Year of construction: 2022, x-travel 5.230 mm y-travel 2.750 mm z-travel 1.100 mm control Heidenhain TNC 640 Tool bore DIN69871 A50 BIG PLUS main drive 32/43 kW torque S1/S6-60% 752/1.011 Nm speeds Spindel stufenlos 6.000 U/min Ljdozgxgmspfx Aiiorn ca. 70 kw weight of the machine ca. ca. 43 t Installation dimensions (length x width x height) ca. 12,2 x 5,7 x 5,1 m

Condition: used, Year of construction: 2006, total width: 3,580 mm, total height: 1,840 mm, Colour: Grey Empty weight: 3.500 kg Dimensions (LxBxH): 180 x 358 x 184 cm Price: On request - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 106992 - Number of spindles [pcs.]: 5 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 30 - - Max. planing block diameter [mm]: 130 - - Tool present: Yes - └ Spindle 2: Lrsdpezguqzsfx Aiion - - Spindle type: Right - - Motor power [kW]: 7.5 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 7.5 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 7.5 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Tool present: Yes - Max. planing width [mm]: 240 - Max. planing height [mm]: 130 - Feed table length [mm]: 1780 - Feed roller diameter [mm]: 130 - Feed motor [kW]: 3 - System/software: memory systeem - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Feed speed: Manual - └ Max. feed speed [m/min]: 4 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 88 - Fuse [A]: 100 - Power [kW]: 41.0 - Transport dimensions: 1800mm x 3580mm x 1840mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1969, Used machine Year of manufacture: 1969 Runs perfectly Max. working width: 170 mm Max. working height: 130 mm 1st shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5th shaft: top Availability: short-term Lrsdpfxexavtqe Aiijn Storage location: Röllbach

Condition: used, Used machine Year of manufacture: 2004 Equipment and technical data: - Operating hours: approx. 5000 - Planing width: 230 mm - Planing height: 120 mm - Number of spindles: 6 - Spindles at the bottom: 2 - Spindle on the right: 1 - Spindles on the left: 1 - Spindles at the top: 2 Ljdsyxyauepfx Aiiern - Spindle arrangement: bottom / right / left / top / top / bottom - Motor power in kW: 11 / 7.5 / 7.5 / 11 / 11 / 11 - Maximum spindle speed: 6800 rpm - Spindle diameter: 40 mm - Feed rate: max. 30 m/min - Feed rate: infinitely variable - Feed rate: 4 kW - Main motor: 11 kW - Preliminary trimming cutter - Machine table surface: chrome-plated - Infeed table length: 2000 mm - Table rollers: driven - Lubricant pump: manual - Overpressure: pneumatic - Drive: feed rollers, cardan shaft - Total connection: 80 kW - Dimensions: 4100 x 2050 x 1900 mm Machine offered without tools; used tools can also be provided. Availability: short notice Location: Röllbach

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Features and Technical Data: - Length of jointer table: 2100 mm - Spindle diameter: 30 mm - Planing head diameter: 100 mm - Planer spindle speed: 6000 rpm - Working width: 30 - 180 mm - Working height: 6 - 120 mm - Motor power, bottom/left/right: 3.7 kW each - Motor power, top (thicknessing shaft): 5.5 kW - Feed speed: 6 and 12 m/min Lrjdpfxox Enrfs Aiisn - Electric height adjustment - With 1/10 step control - Including electronically controlled infeed roller - Including planing heads - Extraction connectors: 160/120/120/140 mm Availability: short-term Location: 63934 Röllbach

Condition: used, Used machine Equipment and technical data: - Planing width: 510 mm - Planer table length: 2620 mm - Motor – cutter head: 4 HP, 400 V, 50 Hz - Star-delta starting - 2-knife cutter head - Tiltable fence for planing Ledpfxey Ih Sqo Aiiorn Machine does not have a motor brake and can therefore only be offered for spare parts Availability: short-term Location: 63934 Röllbach

Condition: used, Used machine Lredey R E U Iopfx Aiion Equipment and technical specifications: - 4-knife planer shaft - Feed speed: 7.5/15 m/min - Surface planer: - Working width: 500 mm - Total table length: 2,200 mm - Motor: 4 kW - Thickness planer: - Minimum working height: 3 mm - Maximum working height: 235 mm - Max. depth of cut: 8 mm - Digital height adjustment display with decimal precision Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Technical specifications: Length of jointer table: 2,100 mm Diameter of tool spindle: 30 mm Diameter of cutterheads: 100 mm Cutterhead speed: 6,000 rpm Ljdpfx Aiew I U Uqeisrn Working width: 30 – 180 mm Working height: 6 – 120 mm With optionally available smaller cutterhead for the left shaft and narrower feed rollers, a minimum width of 15 mm can be achieved. Motor power below, left, right: each 3.7 kW Motor power above (thicknessing shaft): 5.5 kW Feed speed: 6 and 12 m/min Electric height adjustment With 1/10 incremental control Includes cutterheads Extraction ports: 160/120/120/140 mm Availability: short-term Storage location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2023 Approximate dimensions: Length: 2,300 mm Width/Depth: 1,100 mm Weight: 980 kg Total table length: 2,300 mm Infeed table length: 1,200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1,200 mm Fence height: 190 mm Fence tilting range: 90° - 45° Thicknesser extraction port diameter: 120 mm Main motor: 7 kW Space requirement length: 2,300 mm Space requirement width/depth: 1,610 mm Space requirement explanation: The dimensions include maximum travel paths or usable lengths. Machine body length: 1,235 mm Machine body width/depth: 850 mm Length: 1,000 mm Width: 3,500 mm Note on working area: Please add the specified dimensions to the space requirement to determine the recommended clear installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phases: 3-phase Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5,000 rpm Maximum planing width: 520 mm Feed speeds: 5/8/12/18 m/min Availability: short-term Lrsdpfx Aextgz Esiisn Location: Solingen

Condition: used, Used machine Jointer: Working width: 500 mm Total table length: 2200 mm 4-knife cutterhead with segmented planer knives Motor: 4 kW Thickness planer: Min. working height: 3 mm Max. working height: 235 mm Ljdpfxoza I Tks Aiisrn Max. chip removal: 8 mm Digital height adjustment display with decimal readout Feed speed: 7.5/15 m/min Availability: short-term Storage location: Flörsheim

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Dimensions and weights Length approx. 1725 mm Width/Depth approx. 880 mm Weight approx. 270 kg Surfacing Maximum material removal: 4 mm Dust extraction connection Dust extraction nozzle diameter: 2 x 120 mm Thickness Minimum working height: 3 mm Maximum working height: 230 mm Maximum material removal: 4 mm Electrical data Power of drive motor: 4 kW Connection voltage: 400 V Mains frequency: 50 Hz Lsdpfx Aijkwhyksisrn Planer head Type: TERSA Number of planer knives: 3 Speed: 5200 min¯¹ Maximum planing width: 300 mm Feed Speed: 7 m/min Availability: short notice Location: Flörsheim

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Technical data: Working width: 630 mm 4-knife cutterblock, TERSA system, d=120 mm: 4,800 rpm Max. planing depth according to CE: 8 mm Min./max. thicknessing height: 3/310 mm Min. workpiece length: 250 mm Feed speed: stepless 6 - 20 m/min Motor 380 Volt / 50 Hz: 7.5 kW Sound level according to EN 27960: 86 - 90 dB(A) Standard equipment: Thickness table adjustment via 4 trapezoidal thread spindles Electromotoric thickness table lift with electronic positioning device (planing height input via keypad with electronic display) Electrics according to CE with magnetic brake Protective switch Emergency stop switch Safety switch for cutterblock guard Thickness table extension 600 mm Extraction port d=150 mm Availability: short-term Lrjdpfxsw I U Hmj Aiijn Location: Hochheim

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Technical specifications: Length of jointer table: 2100 mm Diameter of tool spindle: 30 mm Diameter of planer heads: 100 mm Planer spindle speed: 6000 rpm Working width: 30 - 180 mm Working height: 6 - 120 mm With an optionally available smaller planer head for the left spindle plus narrower feed rollers, a minimum width of 15 mm can be achieved Motor power bottom, left, right: each 3.7 kW Motor power top (thickness spindle): 5.5 kW Feed speed: 6 and 12 m/min Electric height adjustment Lrjdpfx Aisxgkf Uoion With 1/10 increment control Including step-controlled feed roller Including planer heads Extraction ports: 160/120/120/140 mm Availability: short-term Storage location: Flörsheim