WEINIG UNIPLAN double-sided planer

WEINIG uniplan

Condition: reconditioned (used), Working width 230 mm Working height 15-120 mm Number of spindles 2 St. Weinig Hydro Planer Type Uniplan 23 ----- Machine was factory overhauled by Weinig in 2024. Description: Dcsdpfx Asxpn Tzolbol For two-sided horizontal woodworking with two working spindles. Spindle arrangement: horizontal, bottom and top. The two horizontal spindles are equipped with hydraulically tensioned counterbearings without axial adjustment. Built-in straight jointers on both spindles with automatic stone feed, remotely controlled with the hood closed. Machine with continuous, chainless feed, equipped with rubber rollers. Electric up/down adjustment of the spindles according to a mechanical digital display (SIKO). On/off switch for limiting the up/down adjustment. Feed roller pressure pneumatic. Stops and table tops are not adjustable. Machine with steel table tops. Machine with full enclosure and integrated sound and dust protection including interior lighting. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC - 204 - 1. Other electrical regulations are not taken into account. Machine includes operating tools, but does not include machining tools. The Weinig Uniplan spindles operate at a speed of 7200 revolutions per minute. Before using existing tools, please check that they are suitable for the speed. Please also consider this when ordering new tools. Technical specifications Max. working width: 230 mm Min. working height: 15 mm, max.: 120 mm Feed: 3 kW (4 HP) Horizontal spindles each: 7.5 kW (7.5 HP) Infinitely variable feed speed: 6 - 36 m/min. Spindle speed: 7,200 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Maximum tool radius: 163 mm Fixed clamping clearance at bottom: 0.5 mm (Technical data according to the manufacturer - no guarantee!)

Condition: good (used), Year of construction: 1994, 2-sided planing machine, top and bottom Constant table (always the same feed height) Max. planing width: 600 mm Dsdpfx Aehuthyjlbocl Max. planing height: 280 mm Planer shafts with strip knives Ready for immediate use.

Condition: used, Weinig Unimat 23 E + Uniplan 23 planing line, including a return conveyor. Dcodpfx Aszrxzuolbel An NC-controlled line for planing and profiling window scantlings, including glazing bead cutting or other planing tasks, with automatic return of the workpieces to the operator. Technical data: - Spindles: 4 + 2 - Working width: 230 mm - Working height: 120 mm - Spindle 1: 7.5 kW / 50 mm / 8,000 rpm - Spindle 2: 11 kW / 50 mm / 8,000 rpm - Spindle 3: Shared motor with spindle 2 / 50 mm / 8,000 rpm - Spindle 4: 7.5 kW / 50 mm / 8,000 rpm - Spindle 1 Uniplan: 5.5 kW / 50 mm / 7,200 rpm - Spindle 2 Uniplan: 5.5 kW / 50 mm / 7,200 rpm - Feed rate: 5–24 m/min - Control: Nexus PC control system - NC axes: Unimat 2 & 3, Uniplan 1

Condition: used, Weinig Uniplan 23 hydro-planer for double-sided surface finishing, as an alternative to sanding (e.g. in window manufacturing), featuring high-performance spindles. Jointer Idler bearing Short parts pack In very good original condition Technical data: - Spindles: 2 - Spindle configuration: Bottom (7.5 kW) – Top (7.5 kW) Dodjzrxydopfx Albocl - Working width: 230 mm - Working height: 120 mm - Spindle diameter: 50 mm - Feed: 3 kW // max. 36 m/min - Spindle speed: 7,200 rpm

Condition: used, Year of construction: 2007, spindle diameter: 45 mm, number of spindles: 6, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007, machine already dismantled 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Dedpfx Alou Agh Sjbjcl Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: used, Second-hand Weinig Uniplan control cabinet, suitable as a source of spare parts or for building a new control cabinet with an operating panel. Dcedpfx Ajzrxtdjlbjl Available: No. 1 and No. 2

Condition: reconditioned (used), Number of spindles 8 St. Working width 230 mm Working height 120 mm Weinig Planing and moulding line ----- Consisting of the following individual machines: Item 1: Weinig Profimat 23 E, four-side planer, stock number: 2803 5 spindles + glazing bead saw Item 2: Weinig Uniplan 23, stock number: 2804 Fine and hydroplaner with 2 horizontal spindles Item 3: Weinig RF 15, stock number: 2805 Longitudinal-cross-longitudinal conveyor with workpiece return to the operator Detailed descriptions of the machines can be found under the mentioned stock numbers. (Technical specifications according to the manufacturer, without guarantee!) Dcjdpfxjxpn Tue Albol

Condition: used, Year of construction: 1994, SECOND-HAND 5 SPINDLES MOULDER WEINIG MOD. PROFIMAT 23 Dodperm Rxwjfx Albocl - Working width 230 mm - Working height 120 mm. Composition : - horizontal bottom - vertical right - vertical left - horizontal top - horizontal bottom Year 1994 V 380/50

Condition: excellent (used), Year of construction: 2004, Weinig Hydro fine planing machine, Uniplan 23 Year of manufacture: 2004 Working width: 230 mm Working height: 120 mm Dedpfx Aozg Euqslbjcl 1st spindle, bottom: 7.5 kW 2nd spindle, top: 7.5 kW

Condition: excellent (used), Weinig Uniplan double-sided planer Dcsdorxuvqopfx Albel Planing width 220mm Planing height 15-120mm Power of horizontal spindles 2x 5.5kw Spindles speed 6000r.p.m Diameter of spindles 50mm Spindles supported on both sides Feed speed 6-32m/min Feed motor 3kw

Year of construction: 1998, condition: excellent (used), Press with working dimensions 4.5m X 1.9m Dcjdpfolzi S Nsx Albel