Used 4 Jaw Chuck For Lathe for sale (65,720)

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set Kedperhmmysfx Ahgonb -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 18 mm -Dimensions: see photo techn. drawing -Quantity: 1x set of interchangeable jaws available -Total dimensions: 61/72/H47 mm -Total weight: 0,9 kg/pc.

Condition: not inspected (used), Year of construction: 1990, functionality: limited functionality, turning length: 600 mm, spindle speed (min.): 4,000 rpm, spindle bore: 65 mm, type of input current: three-phase, total height: 270 mm, total length: 5,000 mm, total width: 220 mm, overall weight: 4,000 kg, No. 202 Monforts RNC 4 without tailstock Machine No. 13772 Serial No. 11914 Control: GE Fanuc Tool turret: SAUTER turret ø40 • Type 0.5.801.020; • ID No. 070615; • Commercial No. 14-89.44436/7 without chuck without tools Accessories: Chip conveyor KS Kabelschlepp Kodpfx Ahjzypb Usgsnb Year of manufacture: 1990 Item No. 3046 ----- 201 Monforts RNC 4 with tailstock Machine No. 137xx Serial No. 119xx Control: GE Fanuc Monforts Control System F SAUTER turret ø 40mm • Type 0.5.801.020; • ID No. 070615; • Commercial No. 14-89.44436/7 without chuck, without tools Accessories: with tailstock Chip conveyor KS Kabelschlepp Year of manufacture: 1990; Item No. 3254 ----- Technical data: RNC 4, RNC series Control: Fanuc 10 T Monforts Control F Max. turning length 600 mm / 1000mm Machine Ø over bed 420 mm Max. swing diameter over cross slide 280 mm Tool turret stations 12 VDI Spindle flange according to DIN 55026 A 6/A 8 Spindle Ø in front bearing 130 mm Material passage through the spindle 65 mm Speed range basic version 5-4000 rpm Tool turret, 12 tool positions: Total power requirement: 22 kW Machine weight approx.: 4 t Space requirement approx.: m The machines have not been in production for several years and were intended to be used as a source of spare parts. The batteries for the control system were replaced regularly. Both machines will be sold as a package. The machine is still connected to the power supply, and the control system starts up without any problems.

Condition: used, Technical details: number of spindles: 11 Stück number of stations: 11 Stück taper: SK 40 air pressure - required: 6 - 7 bar total power requirement: 13 kW weight of the machine ca.: 10,2 t space requirements of the machine approx.: 4,0 x 4,0 x 3,4 m dimensions of machine: 3,4 x 3,45 x 2,9 m dimensions electric cabinet: 2,1 x 0,4 x 1,9 mm Transfermachine (drilling & cutting) Accesssories optional please enquire to this additional position! - workpiece holding turret Ø 1000mm with tool holder for 8 tool clamping stations, self centering clamping chuck jaws between the jaws, max. 20mm chuck jaw stroke ( oil pneumatic circulation) - 11 working stations with Sk40 intake (right 4x Drill-& Mill spindle and 1x mitU-axis , left 4x Drill-& Mill spindle ) - drill unit 8x spindle stroke 125mm, feed 0 - 2 m/min, 164 - 1005 rpm with 12 gears stages - thread cutting unit working stroke 125mm, rotation direction clockwise and counter clockwise, 31,5 - 194 rpm with 12 gears stages - opposite located drill units 8 pieces with SK 40 holder - coolant device with supply - control via switch panel - with swarf basin L: 1200 x W: 740 x H: 220mm i.D. Kedsu Idw Ijpfx Ahgjnb *

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 240 mm -Passage: Ø 77 mm -Hole circle: Ø 220 mm Knsdpfx Ahsqqpinegob -Weight: 18 kg

Condition: excellent (used), Four-jaw chuck make Röhm diameter 315 mm single adjustable jaws bolt circle 120 mm Kodpfxspk A A He Ahgenb

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, hard Knsdpew Dp Thofx Ahgsb -Jaw width: 34 mm -Dimensions: see photo technical drawing -Dimensions total: 130/136/H80 mm -Total weight: 7.3 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set, drill jaw Knedjx Ic Tiopfx Ahgeb -Manufacturer: Röhm, drill jaw BB, size 200, 4-jaw set, 2 sets -Type: 110068 -Jaw width: 20 mm -Dimensions: see photo technical drawing -Price/Sale: only complete set -Overall dimensions: 160/70/H53 mm -Total weight: 2.8 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth, 4 sets -Jaw width: 20 mm -Attachment: Material: Aluminum -Dimensions: see photo technical drawing -Submission/Price: complete -Transport dimensions: 350/300/H75 mm -Total weight: 9.2 kg Kodpfxezlc Dme Ahgenb

Condition: excellent (used), Four-jaw spiral chuck Diameter 315 mm Chuck height, flange 125 mm Short taper bore, size 6 Knjdpfx Ahelguy Ssgeb Taper diameter 106.39 mm Pitch circle diameter for studs 133.4 mm 4 studs, M 12 Accessories: 1 chuck key 1 set of hardened boring jaws 1 set of hardened turning jaws Weight 103 kg Shipping dimensions: W 800 x D 600 x H 550 mm

Condition: used, three-jaw chuck, three-jaw lathe chuck Knjdpfx Ajuypylohgob -Manufacturer: SCA Skand Chuckfabriks, three-jaw chuck chuck size Ø 110 mm -Passage: Ø 25 mm -Bolt circle: mm -Dimensions: Ø 110 x 115 mm -Weight: 4.8 kg

Condition: good (used), Four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 190 mm -Passage: Ø 60 mm -Hole circle: Ø 170 mm -Weight: 9.3 kg Knedpfjqxvxpex Ahgeb

Condition: ready for operation (used), Outer Ø: 165 mm Kedpjxb A Nnjfx Ahgjnb Bore: 45 mm Total height: 85 mm Short taper mount: with 4 studs M 10

Condition: used, Technical details: spindle taper: SK40 spindle stroke: 175 mm number of spindles: 8 Stück number of stations: 5 Stück cycle time: 15-20 sec Knodpfx Aju Idycshgeb revolutions per minute: bohren/drill/taladrar 225...1037 U/min. revolutions per minute: gewinde/threading/roscar 50...316 U/min. feed: 0,2 m/min total power requirement: 30 (40PS) kW weight of the machine ca.: 9,0 t space requirements of the machine approx.: 3,9x2,4x2,5 m dimensions of machine: L:3,9xB:2,2xH:2,7 m dimensions L x W x H: +Anlage/plant/planta 2,7x2,52x2,25 m The machine will be on a General overhaul (pictures from original condition at the former Company) The machine has been constructed for the metal cutting process of workpieces in one clamping session. Especially blanks made of brass with a diameter 90mm x approx 100mm length would be machined with this machine. description: - workpiece support with switch plate with clamping station type round table with horizontal axis with 5 workpiece stations processing units: - drill spindle and thread cutting units - drill capacity up to 2 3/4" and 81,53mm in brass - thread cutting up to 2 1/2" und metric thread Machine is equipped with a feeding-and unloading unit for workpieces. ( feed capacity 3 -4 pieces/min and cycle time 15 - 20 sec.) furthermore incl. coolant device i.D. *

Condition: used, RÖHM 3-Jaw Chuck, Used Type DURO-T315 Knsdpfswm D Rtox Ahgeb - without jaws -

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, permanent magnetic lathe chuck -Manufacturer: SFN, magnetic clamping plate permanent magnetic lathe chuck with chuck flange -Type: PUSd-200 -Clamping surface: Ø 200 mm -Bolt circle: Ø 160 mm M10 -Recording dimensions: see photos -Dimensions: Ø 200 x 60 mm Kodpoxd Upfjfx Ahgonb -Total weight: 8 kg

Condition: good (used), 3-Jaw Spiral Chuck Knjdspmtgnopfx Ahgjb Manufacturer: RÖHM Diameter 500 mm Spindle mount DIN 55027 size 11 Chuck inner bore 200 mm Chuck height 145 mm Weight 182 kg Accessories / Special Features: • Hard turning and drilling jaws • 1 chuck key Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, three-jaw chuck, three-jaw lathe chuck -Manufacturer: SCA Skand Chuckfabriks, precision three-jaw chuck chuck size Ø 230 mm -Jaws: individually and fully adjustable Kedpfeux Safex Ahgonb -Passage: Ø 66 mm -Bolt circle: Ø 193 mm / M12 -Dimensions: Ø 230 x 130 mm -Weight: 21.2 kg

Condition: excellent (used), 3-jaw CNC power chuck, e.g. for a HYUNDAI-KIA SKT 100 M Knedpew Elp Iefx Ahgob Diameter: 150 mm Spindle mount: A 2-5 Speed range: max. 6,000 rpm Through bore: 42.5 mm Weight: 8 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: like new (used), Year of construction: 2010, Hydr.power chuck Fabr.RÖHM Type : KFD-315 Bj.ca.2010. Diameter :315 mm Nmax:2800rpm Knjdpoqxavlsfx Ahgob in very good condition

Condition: used, Three-jaw chuck key, three-jaw lathe chuck Knodpfx Ahod Erwcjgob -square size: 17 mm -Sleeve: Ø 38 mm -Number: 2x available -Price: per piece -Weight: 2 kg/piece

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 210 mm, spindle bore: 40 mm, turning diameter: 335 mm, center height: 165 mm, turning length: 1,016 mm, spindle speed (max.): 2,500 rpm, overall weight: 900 kg, three-jaw chuck diameter: 200 mm, For sale is a Colchester lathe with accessories in good, used condition, as shown in the pictures. Technical data: • Manufacturer: Colchester • Model: Master-2500 • Distance between centers/turning length: approx. 1,016 mm • Center height: approx. 165 mm • Turning diameter over bed: approx. 335 mm • Turning diameter over carriage: approx. 210 mm • Max. spindle speed: approx. 2,500 rpm • Spindle nose: 4 in. D.1. Camlock • Spindle bore: approx. Ø40 mm • Three-jaw chuck: approx. Ø 200 mm (Pratt Burnerd) • Weight: approx. 900 kg • Tailstock quill: MK3 • Motor power: approx. 5 hp • With accessories: Set of jaws for the chuck, quick-change tool holder, centers, etc. • Condition: Used, functional Shipping costs via freight forwarder are possible (please inquire with your postal code). International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Kjdpfxez Dbkyj Ahgsnb Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale.

Condition: used, Three-jaw chuck, three-jaw lathe chuck Knedpfxod Ira Uo Ahgsb - Chuck size: Ø 250 mm - Passage: Ø 80 mm -Short taper: 6 -Remark: without further jaws -Weight: 26.1 kg

Condition: used, Three-jaw chuck Manufacturer: Mundorf Kjdpfx Aeddzhrshgenb Diameter: 315 mm Type: 2 b 60 kd

Condition: good (used), four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 190 mm -Passage: Ø 57 mm -Bolt circle: Ø 170 mm / M10 -Jaw width: 20 mm / interchangeable jaws not included -Dimensions: Ø 190 x 70 mm Knjdpfjv U N Etsx Ahgsb -Weight: 8.5 kg

Condition: new, O.D. Ø 305 mm I.D. Ø 90 mm Kedpfx Ahefhdnhjgonb