Used 4-Axis Cnc Wire Bending Machine for sale (102,205)

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) Csdpfx Acsxpqy De Negn - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Features and technical data: - Working area X: 3,740 mm - Working area Y: 1,570 mm - Working area Z: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional C-axis locking - Tool changer positions: 24 with rotary magazine; 10 in the left side of the machine stand - Vertical drilling spindles: 12 - Machine table: console table - Table positioning automation: available - 6 workpiece supports, type e-motion - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for pendulum operation - with automatic central lubrication - with mobile control panel with PC monitor - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with hand-held control device Cgsdpfox Hllxsx Ac Njn - Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: short-term Location: Röllbach

Year of construction: 2023, condition: like new (used), functionality: fully functional, 4 axis stone CNC machine for edge finishing/ tap and sink holes - fits BT40ER40/80 - 15 tool holders included - vacuum pump included - including automatic zero point determination via compressed air cylinders - excluding water installation - control cabinet dimensions 900x600x1800 mm Cgsdpfsv Dulqjx Ac Nsn

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Storage location: Nattheim Csdpfx Aovvi Spsc Negn

Condition: ready for operation (used), A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible. Cgsdpfsycwtfox Ac Non

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) Cedpfx Acsx Sw E Ij Njgn - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, A very well-maintained 4-roll CNC plate bending machine LUNA Model: 8344 17/06 Four-roll drive CNC control Mylock 100 Control system operates 4 functions: Feed, bending, clamping, and locking of the top roll Max. working width: 1750 mm Max. sheet thickness: 0.6 mm Year of manufacture: 2003 Weight: 700 kg Made in Sweden Cgsdpfx Aex Nw N Ioc Non

Condition: excellent (used), Year of construction: 2017, operating hours: 10,240 h, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller model: Heidenhain, spindle speed (max.): 15,000 rpm, operating hours of spindle: 10,400 h, We offer in good condition DMG Mori DMF 360-11 4-axis milling machine. X-Axis travel: 3600 mm Y-Axis travel: 1100 mm Z-Axis travel: 900 mm Spindle has been changed 2000 hours ago due to short circuit (no crash) HSK-A63 15.000 RPM spindle 46kW / 61.7 hp - 200 Nm Machine has following options: Swivel head Cedpsxqa I Hefx Ac Nsgn Heidenhain Touch probe TS 642 Automatic door Internal coolant 40 bar with paperbelt filter

Condition: good (used), Year of construction: 2009, Internal Article No.: 25040 CNC Machining Center Müga A7040 Year: 2009 Control: Mitsubishi + 4th axis + ICS (internal coolant supply) / filtration system / extraction system + NC clamp Röhm RKE-125L + SK40 tool holders Cgsdpfx Aowy U Ebsc Nen Spindle: SK40 Spindle speed: 12,000 rpm 24-position tool changer Travel paths: X 700 / Y 400 / Z 550mm Dimensions (approx.): LxWxH 270 x 210 x 270cm Weight: approx. 4t

Year of construction: 2025, condition: new, XX100292 New CNC Machining centre with 4 controlled axes FOM INDUSTRIE FMC 470 Machine in stock and ready for shipping Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool magazine on head (HSK-F63) - No. 2 pairs of pneumatic vices with positioning through the travelling column - No. 2 pairs of low profile jaws for clamping wide profiles - Left pneumatic reference stop - Minimum quantity lubrication (MQL) with pure oil - Central automatic greasing system and device for manual greasing - Chip and waste collection tank in base - Perimeter guard system with automatically opening, front retractable doors - X FLOW (automatic orientation of lubricant nozzles) - Control: POWER-D - Movable control console - 24” display - FST CAM 4 program Optional equipment installed on the machine: - PR202941 Fixed tool magazine for 8 positions in the center on the machine base - PR202962 Device for checking the integrity and measuring tool length - ZR204058 Pendulum mode with multiple workpieces (2 work areas, 4 workpieces) and processing of non-standard lengths with X-PAL: • Two pairs of additional vices with independent positioning • Transformation of std vices into vices with independent positioning • LED bar • Profile positioning software • Software for viewing the progress of the processing cycle • Device for measuring profile length • Second X-FLOW • Right pneumatic reference stop • Pendulum control software • Safety devices for pendulum processing • Tunnel for oversized profile machining • Software to manage oversized machining operations • ''Clock'' time calculation module program - PR202971 Data import software in accordance to FOM protocol and wireless optical bar code and QR code reader - ZP715010 Module for rigid tapping and chase tapping - PR202957 Hinged belt conveyor with ramp - PR203389 Rear chip collection tank - PR202975 Tool set A3/HSK F63 - PR202967 Angle head with vertical disc Ø 230 mm - PR202968 Cone with horizontal disc Ø 250 mm - PR204497 Holder HSKF63 with cutter Ø 200 x 6 mm Cgjdpsiv Imnefx Ac Njn - PR203072 Software adjustment of the vice pressure 3,5 - 7 bar - ZP714611 License for the office version of FST CAM 4

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: TOR4 044, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 12,000 rpm, number of axes: 4, TECHNICAL DETAILS Cgedpfx Acsxtm Dys Non Travel X: 700 mm Travel Y: 400 mm Travel Z: 550 mm Spindle type: SK40 Spindle speed: 12,000 rpm Tool changer: 24 stations MACHINE DETAILS Control: Mitsubishi Dimensions & Weight Dimensions (L x W x H): 2700 x 2100 x 2700 mm Weight: approx. 4,000 kg EQUIPMENT 4th axis Internal coolant supply (IKZ) Filter system Extraction unit NC clamp Rhm RKE-125L SK40 tool holders

Condition: used, functionality: fully functional, Year of construction: 1997, 5-axis CNC tube bending machine BLM Dynamo - 0 Serial number: 605970300001 Year of construction: 1997 Voltage: 380V 50HZ Machine weight: 1500 kg Control system: DOC 85C BLM bar loader BLM CARM 7 Serial number: 340040102059 Year of construction: 2004 Weight: 405 kg Without conveyor belt Without protective grid TECHNICAL DETAILS Number of axes: 5 Average output: ~ 2400 bends/h Bending capacity round tube R=45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R=35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Ms: 4 - 18 x 1.25 mm Bar feeder: BLM Carm 7 (year of manufacture: 2004) Positioning speed X-axis: 2000 mm/s Bending speed H/Z Y-axis: 500 °/s Turning speed Z-axis: 900 °/s Turning speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T axis: ± 0.1 mm Measuring tolerance Y/Z/Q axis: ± 0.1° Maximum range at maximum acceleration X-Y-Z: 1000 mm - 90/90/0° - 0/180/0° with tube 18 x 1.25 mm MACHINE DETAILS Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1500 kg Control system: DOC 85C Codpet R Tgiofx Ac Nogn Ex location Dortmund, free truck loading

Condition: used, Year of construction: 2000, operating hours: 70,000 h, Manufacturer: TBE BUTLER Model: TBE MULTIBEND Fully documented, available for inspection and verification! Wire diameter range: 1.0 mm to 10.0 mm 8 servo axes as standard – optionally up to 24 axes Integrated program memory Independent eyelet station Tilt control at the bending heads Servo indexing unit for 3D rotation Csdpfx Acjxclfhs Nsgn Automatic part rotation for multi-level bending Modular tools – quick changeover times Integrated decoiler Complete diagnostic and fault-tolerance systems Touchscreen programming controls – Allen-Bradley®

Condition: new, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 65 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, number of axes: 5, warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, STANDARD EQUIPMENT • 3 sets of dies (1 set of rolling die and 2 sets of bending dies, or 3 sets of bending dies, according to required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo motor-driven feeding axis • Servo motor-driven rotation axis • Servo motor-driven bending axis • Servo motor-driven H and V axes • 21” TFT touchscreen mobile CNC control unit • Rolling capability • 3D bending simulation • Collision simulation • Daily, weekly, and monthly total operation status reports • Calculation of working material length • Calculation of estimated bending time • Conversion from X-Y-Z to Y-B-C • Mobile foot pedal with emergency stop feature • Remote assistance • Bending with or without mandrel • Safety plate behind the bending head Cgodpfx Asxircgoc Njn • Hydraulic clamping • Hydraulic mandrel • Hydraulic support • Hydraulic linear slide system • Hydraulic claw clamp • Electrical panel safety lock and main switch panel lock • Electrical system cooler • Overload protection • Automatic dispatch of detailed operation reports OPTIONAL EQUIPMENT (Not included in price) • Additional die sets • Safety mat (750 x 1000 mm) • Safety mat (1000 x 1500 mm) • Hydraulic oil heater • Additional mandrel length (up to 6 m, priced per meter) • Ball mandrel and wiper die set • Automatic mandrel lubrication system (for suitable tube diameters) • Hydraulic oil cooler CAPACITY MB-65 CNC/5 AXIS Maximum capacity mm: Ø65x3mm Maximum bending radius mm: 250mm Maximum bending angle °: 190° Hydraulic pressure bar: 50-200 Working length mm: 3000 Rotation tolerances: Adjustable Bending power kW: 22.5 Dimensions LxWxH mm: 6350x1400x1600 Weight kg: 3950

Condition: new, Year of construction: 2025, control type: CNC control, degree of automation: automatic, pipe diameter (max.): 51 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, number of axes: 5, Equipment: CE marking, emergency stop, foot remote control, STANDARD EQUIPMENT • 3 Sets of Dies (1 set of rolling die and 2 sets of bending dies, or 3 sets of bending dies, as per required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo Motorized Feed Axis • Servo Motorized Rotation Axis • Servo Motorized Bending Axis • Servo Motorized H and V Axes • 21” TFT Touchscreen Mobile CNC Control Unit • Rolling capability • 3D Bending Simulation • Collision Simulation • Daily, Weekly, and Monthly Total Operating Status Reports • Calculation of Workpiece Material Length • Calculation of Estimated Bending Time • X-Y-Z to Y-B-C Conversion • Emergency Stop Foot Pedal with Mobile Function • Remote Assistance • Mandrel Bending and Mandrel-less Bending • Safety Plate behind Bending Head • Hydraulic Clamping • Hydraulic Mandrel • Hydraulic Support • Hydraulic Linear Guide System • Hydraulic Chuck Clamp • Safety Lock on Electrical Cabinet and Keyed Panel Lock • Electrical System Cooling Unit • Overload Protection Cgodpfx Asxircajc Nen • Detailed Operation Report Automatically Sent OPTIONAL EQUIPMENT (Not Included in Price) • Additional Sets of Dies • Safety Mat (750 x 1000 mm) • Safety Mat (1000 x 1500 mm) • Hydraulic Oil Heater • Additional Mandrel Length (up to 6 m) – per meter • Ball Mandrel and Wiper Die • Automatic Mandrel Lubrication System (for suitable tube diameters) • Hydraulic Oil Cooler CAPACITY MB-51 CNC/5 AXIS Maximum Capacity mm Ø51x3 mm Maximum Bending Radius mm 250 mm Maximum Bending Angle ° 190° Hydraulic Pressure bar 50–200 Working Length mm 3000 Rotation Tolerances ±0.1 Bending Speed kW Variable LxWxH mm 6350x1400x1600 Weight kg 3750

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, feed length X-axis: 350 mm, travel distance X-axis: 6,500 mm, rapid traverse Z-axis: 350 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 1,000 rpm, overall weight: 4,500 kg, working range: 6,500 mm, spindle motor power: 7 W, Headline Options: - Boost Your Production with the Refurbished NEXUS REV 8000 4-Axis CNC Machining Center! - Precision & Power: The Ultimate 4-Axis CNC Solution for Aluminum Doors & Windows - Maximize Efficiency: High-Speed, Double-Station CNC Machining Center Key Selling Points (Short & Punchy): - 4-Axis CNC Power: Machine complex profiles from the top and all angles (±90°) with incredible precision. - High-Speed Spindle: 7.5 kW spindle reaching 24,000 rpm for fast, clean cuts even on thick profiles. - Double-Station Design: Two independent 6.5-meter workstations for non-stop productivity—machine one profile while setting up the next. - Exceptional Accuracy: Advanced gantry system with dual servo motors ensures perfect alignment and vibration-free operation. - Smart Tool Management: 8-position automatic tool magazine handles tools from 1 mm up to 300 mm disc cutters. - Plug-and-Play Software: Included UNILINK CAD-CAM software streamlines operation from design (DXF) to finished part with automatic tool and clamp management. - Fully Refurbished & Guaranteed: Completely overhauled by NEXUS TECHNICA experts, backed by a 6-month warranty and full future support. Technical Highlights for the Ad: - Work Envelope (X, Y, Z): 6,500 mm x 350 mm x 350 mm (Double Station) - Spindle: 7.5 kW, 24,000 rpm - Control: Advanced CNC with movable terminal (PC, keyboard, mouse included) - Tool Magazine: 8 positions (handles large disc cutters) - Clamping: 10 manually positioned pneumatic clamps (automatic positioning optional) - Software: UNILINK 3D CAD-CAM software - Condition: Professionally refurbished and modernized Ideal For: - Manufacturers of aluminum windows, doors, and sliding systems Csdpfxjxfqg Ns Ac Njgn - Companies working with long aluminum profiles - Businesses aiming to automate and boost production capacity Call to Action: Ready to revolutionize your profile machining? Contact us today for more information and to arrange a viewing!

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Codpfx Acju Tln Nj Nogn Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Year of construction: 2005, condition: ready for operation (used), A Maka CNC 4-axis milling and drilling machine for plastic, wood and aluminum is available. Travel X/Y/Z: 2000mm/6000mm/250mm, C-axis: 360°, rapid traverse X/Y/Z: 45m/min/45m/min/24m/min, spindle mount: HSK63, spindle power: 12kW, spindle speed: 24000rpm. Tool places: 12, angle head places: 3, machine dimensions X/Y/Z: 12000mm/5700mm/3200mm, control: BWO 920, documentation available. On-site inspection is possible. Cgjdpfx Acevmq Tvo Non

Condition: ready for operation (used), Year of construction: 2007, XYZ SMX SLV 3 Axis Turret Milling Machine ProtoTRAK | SMX Control (2007) 3 Axis CNC Capacity (X Axis, Y Axis & Quill) Spindle Taper ISO 40 Spindle speeds to 70 - 3600 RPM Table Size 1473 x 305mm Table Travel: X - 1000mm Y - 410mm Knee Travel: Z - 413mm Quill Travel Z - 127mm Cgedpex Tiq Ssfx Ac Nen Air Power Draw Bar Supplied with a range of spindle tooling Coolant Year of Manufacture: 2007 Weight: 1850 Kgs Power Requirements: 18A *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79109 Machine Serial Number: 12308 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 25498, roller (bottom) diameter: 320 mm, roller (top) diameter: 320 mm, side roll diameter: 260 mm, working width: 2,070 mm, sheet thickness (max.): 25 mm, TECHNICAL DETAILS Sheet width: 2,070 mm Sheet thickness: 25 mm Bending capacity: 18 mm Cgsdpfeygw Ikjx Ac Njn Top roller diameter: 320 mm Side roller diameter: 260 mm Lower roller diameter: 320 mm MACHINE DETAILS Total power supply: 26 kW Dimensions & Weight Space requirement: approx. 4,700 x 2,000 x 2,200 mm Machine weight: approx. 8,100 kg EQUIPMENT Hydraulic lateral roller adjustment Conical bending device 2 driven rollers Hardened rollers Hydraulic drop-end bearing Mobile control panel Foot switch Safety device CE marking

Condition: used, Year of construction: 2021, travel distance X-axis: 1,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 740 mm, controller manufacturer: Fanuc, controller model: Series 0i-MF Plus, workpiece diameter (max.): 800 mm, total height: 3,435 mm, total length: 5,575 mm, total width: 4,621 mm, overall weight: 18,000 kg, Equipment: documentation/manual, CNC 5-axis Vertical machining Centre CNC Control Fanuc Series 0i - MF Plus Table size Ø 800 mm Number of pallets 1 Maximum workpiece dia x height Ø 1200 x 300 mm Movement X-Y-Z-axis 1600 x 700 x 400/740 mm C-Axis (table rotation) 360° Codpfx Acsygw E Ns Negn B-Axis travel -11 /+30 ° Spindle speed 15.000 r/min Spindle Taper Big Plus BT40 Spindle motor 18,5/15 kW Magazin Capacity 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: D06L/7240, Offer Number: D06L/7240 Machinetype: wire and strip bending machine Info: 3D - CNC Make: POST Type: Robomat Constr. year: 1992 wire diameter: 5-12 mm Codpfx Acowi S Sqj Negn spring diameter: feeding length: unlimited feeding length: Location: In our warehouse

Condition: excellent (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 40/32, control type: PLC-controlled, CNC folding machine Manufacturer: RAS Model: 74.30 Year of manufacture: 1990 Condition: very good Control type: CNC control Control model: MB2000 Working width: 3,200 mm Type of crowning: fixed Sheet thickness steel (max.): 4 mm Back gauge adjustment: CNC controlled Back gauge: 1,500 mm Equipment: Documentation/manual, emergency stop switch Gooseneck tools along entire length Cgedpsyhdnysfx Ac Non

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 4-Axis Machining Center IMA BIMA 300 Year of Production: 2009 Technical Condition: Very good Technical Data: * Work Table: 4,300 × 1,250 mm * Supports and Suction Cups: 8 supports, total 24 suction cups * Main Spindle: 7.5 kW (max 11 kW), 1,500–18,000 rpm, HSK-F63 holder, cone diameter 38 mm * Tool Magazine: 18 positions, max tool weight 6 kg, max length 150 mm, tool diameter up to 100 mm (150 mm if adjacent slots are free) Csdpfx Aew R S Dnsc Njgn * Drilling Unit: IMA 14, 14 vertical spindles, 6 horizontal spindles, grooving saw Ø150 mm, 4,500–6,000 rpm, max drill diameter 35 mm * Tool Set: shank cutter Ø18×43/Ø25/110 mm, grooving saw Ø125/Ø30×4/12Z, drills Ø5–10 mm, HSK-F63 tool holder, tool basket * Vacuum Pumps: 2 × 90 m³/h * Protective Mats: operation in alternating mode, front access * Software: IMAWOP installed on the machine + 1 office license * Emergency Power Supply (UPS): computer power backup approx. 10 minutes * Control Cabinet Air Conditioner: ensures trouble-free operation above 35 °C * Main Spindle Horizontal Unit: cross head with 4 spindles, tool diameter 1–16 mm, speed up to 15,000 rpm * Maximum Feed Rates: X 60 m/min, Y 60 m/min, Z 30 m/min * Dust Extraction: central port Ø250 mm, air speed 28 m/s, according to connection diagram * Weight: approx. 5,500 kg * Compressed Air: connection ¾", pressure 6 bar, dry operation recommended with air dryer * Electrical Installation: main switch in a separate control cabinet; complete control cabinet with monitoring; all safety devices CE-compliant; typical cabinet dimensions: H 2,000 × W 1,200 × D 800 mm; power supply 400/230 V, 50 Hz * Working Environment: permissible ambient temperature +15…+35 °C (without cabinet air conditioner) CNC Control: * System: ICOS OPEN 321 (Polish language version) * Interpolation: simultaneous linear interpolation for 3 axes, 2½D circular interpolation on any two axes * Selected IMAWOP Functions: * Operation selection: drilling, milling, grooves * Graphic updates after corrections * Drilling time optimization * Graphical positioning of suction cups * Conditional and formula-based programming * Technological and tool databases * Alphanumeric names/descriptions up to 28 characters * Subprograms, manual input of machining sequences * Error/alert messages * Acceleration/deceleration control (accuracy 0.001 mm) * Automatic zeroing * Corrections from portable console Additional: IMAWOP machining program

Condition: used, functionality: fully functional, machine/vehicle number: D06L/7646, Offer Number: D06L/7646 Machinetype: wire and strip bending machine Make: MRP Type: UB4 Constr. year: dia. range: 1-4 mm width of band: 20 mm Cgsdpfx Aowi S Ncsc Nsn output pieces/min: 80-150 feeding length: 240 mm Location: In our warehouse