Three-jaw Chuck 234/5

Mundorf 310 mm

Condition: good (used), Year of construction: 1971, machine/vehicle number: 170119003210A0, Offer 25217 Technical data: - Groove width: 3 to 36 mm - Max. groove length: 340 mm - Bore diameter: 10 to 350 mm - Feed rate: 0.01 - 0.22 mm - Cutting speed: 2 - 10 m/min - Return speed: 20 m/min - Max. pulling force: 1.5 t - Max. workpiece weight: 3 t - Table size: 350 x 450 mm - Working / operating height: 1050 mm - Drive: 400 V / 3 kW Ijdpewu Suvjfx Aqusic - Space requirement: approx. W 900 x H 1250 x D 700 mm - Weight: approx. 900 kg - Extensive accessories as shown

Condition: new, Year of construction: 2024, The Just Lift JL250 to JL750 crane from Just Lift has been designed to speed up and optimize all lifting and logistics operations, increasing productivity while ensuring maximum safety and ergonomics for the operator. - Motorized tiller head guidance - Arm control with remote controls - Hydraulic lift and extension - Anti-tipping system as standard - 100 % electric Max. Forward travel speed km/h 4.0 Max. Reversing speed km/h 4.0 Lifting system Max. Load capacity kg 250 to 750 No. Operator 1 Arm lifting speed mm/s 22.00 Arm descent speed mm/s 15.00 Arm extension speed mm/s 7.00 Arm return speed mm/s 5.00 System pressure bar 125.00 Oil type ISO VG 46 Oil quantity l 2.00 Weight without batteries kg 610 to 1,080 Weight incl. 105/130A AGM batteries kg 680 to 1,146 Length max mm 2,835 Length min mm 1,891 Width mm 980 Iijdpfx Aqsh Tx R Tjuec Height handlebar/drawbar mm 1,229 Height max mm 3,030 Height min mm 2,313 Lifting height max mm 3,010 Wheelbase mm 1,000 Turning circle mm 1,050 We can currently only offer new equipment.

Condition: good (used), Centre height: 290 mm Centre distance: 3000 mm Swing diameter over bed: 580 mm Swing diameter over cross slide: approx. 400 mm Spindle bore: 63 mm Spindle mount DIN 55027: Size 8 Speed range: 25 – 1120 rpm Bed width: 365 mm Longitudinal feed: 0.03 – 1.3 mm/rev Cross feed: 0.008 – 0.33 mm/rev 80 metric threads: 0.25 – 76 mm 96 Whitworth threads: ½” – 152 tpi 52 module threads: 0.25 – 22 module 88 diametral pitch threads: 1 – 176 DP Tailstock taper: MK 4 Drive power: 5.5 kW Dimensions (L x W x H): 4450 x 1300 x 1350 mm Weight: 2800 kg Accessories / Special Features: • Quick-change tool post, brand "Multifix", size B Iodpfjxtu Ersx Aquoic • Hardened bedways • Bed stop Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Technical details: diameter: 600 mm passage: 250 mm width: 100 mm revolution per minute: 500 U/min weight of the machine approx.: 175 kg 3-jaw chuck with internal jaws flange Ø 730 x 10mm (pitch circle bore Ø 680mm) 1 set of external jaws 1x chuck key Iiedpfx Aqju N Ez Djusc *

Condition: used, Year of construction: 2007, turning diameter 600 mm swing diameter 680 mm turning height 600 mm z-axis 500 mm x-axis 560 mm drive of main spindle 65/80 kW main spindle speeds: 2800 workpiece tool changer 12 Plätze feeds z-axis 0,01-30.000 mm/min feeds x-axis 0,01-45.000 mm/min chuck Rota NCR 630 mm voltage 400 V Iisdpfx Aev Rrq Dsqusc frequency 50 Hz control Siemens 840 D pl total power requirement 140 A weight of the machine ca. 18 t dimensions of the machine ca. 6,5 x 3,8 x 4,20 m

Condition: excellent (used), Four-jaw chuck make Röhm diameter 315 mm Iijdpfx Aqopk A A Hsusc single adjustable jaws bolt circle 120 mm

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand HAAS Model Sigma 5 Main Drive Iodpfx Aqex H Uz Nsueic Number of axis 2 This HAAS TR160 with Sigma 5 was manufactured in 2016. It features a 2-axis table and is equipped with a Sigma 5 servo motor, ensuring precise and efficient operation. Ideal for those looking to enhance their machining capabilities. Contact us for more information. Application Types Other Machine Tools

Condition: good (used), 1 used twist drill grinding machine Manufacturer: Darex Model: XT 3000 Technical data Motor: 230 Volt – 0.2 kW – 50 Hz Iedjyl Idaopfx Aqusic Speed: 2850 rpm Grinding type: Conical surface, cross grinding Point angle: 118°–150°, steplessly adjustable Grinding range: 3–21 mm Dimensions (W x D x H): 410 x 410 x 260 mm Weight: 25 kg Equipped with: Grinding attachment and cross table for grinding countersinks

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm control Fanuc 31i max. turning speeds 5.000 min/-1 drive capacity - main spindle 15 kW max. torque 476 Nm bar passage 65 mm x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm spindle hours ca. 700 h accessories: Lünette, Späneförderer In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical details: Isdpfoxq R Evex Aqueic - approx. 500 spindle hours Accessories: - Steady rest - Chip conveyor Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 1994, turning diameter 1250 mm swing diameter 1160 mm turning height 800 mm faceplate diameter 1000 mm total power requirement 97 kW weight of the machine ca. 25000 t dimensions of the machine ca. m P I T T L E R (Germany) CNC Controlled Vertical Turning and Milling Centre With Tool Changer and Pallet Changer Iiodpfx Aqot Hwy Ssujc Model PV 1250 / 1-1 Year 1994 _____ Turning Ø max. 1,000 mm Swing Ø max. 1,160 mm Turning length 800 mm X Axis - horizontal 1,300 mm Y Axis - vertical 800 mm Feed / quick feed 16,000 mm/min Main spindle speeds 10 - 1,000 rpm ! Main spindle speeds via separate C Axis 0.1 - 16 rpm Positioning accuracy of C Axis 360° + / - 5 " Tool holder ISO 50 Tool drive 22 kW Max. torque / spindle speed 315 Nm / 2,500 rpm Pallet size 630 x 630 mm Spindle drive 63 kW Total electrical load 97 kW - 400 V - 50 Hz Weight, approx. 25,000 kg Accessories / Special Features * CNC Contouring Control Model NUM 760 TX in 3 axes, with graphics, menu-guided dialogue programming, and all the usual options, cycles and sub-programs; with tool compensation, thread cutting cycles, constant speed programming, etc. * 2-axis CNC tool slide (1,300 x 800 mm) with driven tool holders, ISA 50 / 22 kW. * Tool changer with 16 tool holders, max. length 450 mm, max. weight 40 kg. * Pallet changing system, pallet size 630 x 630 mm, with setup station with indexing and drive of the pallet, and 2 separate pallet stations. * 3 pallets, 630 x 630 mm. * 3-jaw chuck, Ø 650 mm. * Face plate, Ø 900 mm. * Chip conveyor. * Band filter coolant equipment. * Completely covered working area, including safety fence for the pallet changing area. * Separate switch cabinet. * Operating manual. * Approx. 20 tool holders. * Various other accessories. High performance universal turning and milling centre for full range of machining (turning, boring, drilling, milling, and threading) with high speeds and high turning volume. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have a selection of modern lathes available. Please let us know your requirements