Used 4 Jaw Chuck For Lathe for sale (35,662)

Condition: ready for operation (used), Outer Ø: 125 mm Bore: 32 mm Fpsdpfohq Tzgjx Afien Short taper Camlock size 1-4"

Condition: refurbished (used), Year of construction: 2004, machine/vehicle number: 350735, Manufacturing origin Swiss Voltage 380/50/3 Netweight 1570 kg Custom position 8458.1120 Dimensions 1830x1260x1700 mm TECHNICAL DATA Capacities Max. turning diameter Ø 270 mm Max. swing over carriage Ø 115 mm Centre height over carriage 60 mm Turning length B32 265 mm Headstock A2-4 Spindle for Schaublin collets W20 / W25 / F38 / B32 Spindle speed, continuous 50 - 5'000 min-1 Spindle inner diameter (without chuck key) 39 mm Max. bar passage in collet W20 14,5 mm Max. bar passage in automatic chuck 32 mm Max. recommended turning diameter 200 mm Pneumatic clamping Adjustable axial clamping force, force at 5 bar 1'150 daN Cross slide Cross travel, X axis 180 mm Resolution, X-axis (at radius) 0,0005 mm AC motor drive, continuous / intermittent torque 4 / 14 Nm Ball screw, diameter x pitch Ø 20 x 5 mm Longitudinal travel, Z axis 390 mm Fjdpfx Aehr Rtnefiopn Resolution, Z axis 0.001 mm AC motor drive, continuous / intermittent torque 4 / 14 Nm Ball screw, diameter x pitch Ø 32 x 5 mm Feed rates Working feeds, X and Z axis, stepless 0 - 5 m/min Rapid feeds, X and Z axis 8 m/min Feed forces, X / Z axis, continuous 503 / 503 daN Tooling system: Revolver Standardised tool holder attachment VDI 20 Number of tool stations 8 Number of live tool stations 4 AC motor drive, continuous / intermittent 0.55 / 1.1 kW Spindle speed, stepless 30 - 5'000 min-1 Max. tool cross-section 16 x 16 mm Integrated coolant and indexing in both directions yes Cooling Tank capacity 55 L Pump capacity 10 L/min Pressure 1.7 bar Pneumatic tailstock Taper of the spindle sleeve Morse 3 Spindle outer diameter 45 mm Spindle stroke 70 mm Adjustable contact force 25 - 260 daN Tip height from ground 1'162 mm errors and omissions excepted data gived without obligation

Condition: used, Chute, funnel, product chute for Big Box Fjdpfx Aov Hncbjfispn It is versatile and can be integrated into production lines. Dimensions: 0.85m x 1.6m x 2.1m (Length x Width x Height) Condition: Used, purchased as seen.

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 18049, Controller: Siemens 840 x-travel: 650 mm y-travel: 650 mm z-travel: 650 mm Table: 400 x 400 mm Spindle speed 10.000 rpm Rapid traverse 30 m/min Number of pallets 8 Fedpfx Afswn Exzoiepn Change time of pallets 8 sec Power capacity 35 /24 kW Total power requirement 65 kW Tool changer SK 40 Machine weight: 13.000 kg Machine dimensions: 4730 x 3252 x 2650 mm

Condition: new, 4-jaw Chuck unused Fjdpfx Asd Idnvefijpn Diameter 320 mm Recording KK 8 (140 mm) Forward 95 mm JAWS Height 140 mm Weight 36 kg

Condition: ready for operation (used), 6 jaws self-centering lathe chuck D1600 6 jaws 4 jaws 3 jaws 2 jaws Fpodow Uqnmspfx Afien

Condition: ready for operation (used), Outer Ø: 130 mm Fedohq Ty Uepfx Afiopn Bore: 25 mm Short taper Camlock size D1-4"

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 Fjdpfowdaimsx Afispn - Number of counter-spindles : 1 - Number of cross slides : 6 SPINDLES - Max. bar diameter : 45 [mm] - Spindle speeds : 132 - 1667 [rpm] COUNTER-SPINDLE - Counter-spindle position : 6 POWER SUPPLY - Supply voltage : 380 [V] - Machine floor space : 6454 x 1457 [mm] - Machine weight : 8077 [kg] EQUIPMENT - Parts catcher - Parts conveying strip - Coolant tank - Bar loader : IEMCA PRA 40/41F - Bar holder and stand

Condition: used, Boehringer VDF 25m-4, CNC lathe, used machine Manufacturer: Boehringer Model: VDF 25m-4 Year: 2001 Weight: 18,700 kg with chip conveyor with oil mist extractor Chuck size: 400 mm Power: 40.3 kW Max. spindle speed: 4,000 rpm Turning diameter: 450 mm Fjdpsw Nbgiofx Afijpn Swing over bed: 700 mm Distance between centers: 750 mm Control: CNC (Siemens)

Condition: new, Precision Center Lathe and Center Lathe Make: OPTIMUM Model: OPTiturn TZ 4V Item No.: 3432245 Condition: New machine center height: 200 mm center width: 800 mm speed: 50 - 3.000 rpm infinitely variable via 2 gear steps with SIEMENS Inverter-Vario-drive equipped as standard with: - 3-axis digital display DPA 32 - digital speed display in headstock - fixed center point MK 3 - quick change tool holder size B - turning toolholder BD Fedpog Hkmrjfx Afispn - reducing sleeve MK 6 / MK 3 - steady rest fixed ø 10 - 130 mm - steady rest travelling ø 10 - 100 mm - Coolant device - Chip tray, extendable - LED machine light - Operating tool

Condition: good (used), functionality: fully functional, used (as new) Fpjdpfxsw Im Txs Afisn 3-jaw chuck RÖHM D = 160 mm Mount MK 4 and 3-jaw chuck FORKARDT D = 160 mm Mount MK 5

Condition: used, Year of construction: 2014, functionality: fully functional, Travel path - X axis: 740 mm Travel path - Z axis: 400 mm Travel path - Y axis: 30 mm (optional) Chuck diameter: 260 mm Max. turning diameter: 200 mm Spindle speed: 4,500 rpm Fpsdpfx Afjw Imtfoien Tool speed: 6,000 rpm Rapid traverse Z-axis: 15 m/min Rapid traverse X-axis: 60 m/min Rapid traverse Y-axis: 30 mm Machine weight approx.: 9,000 kg

Condition: excellent (used), Outside Ø: 310 mm Bore: 105 mm Construction height without jaws: 110 mm Fjdpfsg Hzaaex Afijpn Jaw height: 45 mm Reversible jaws

Condition: used, TECHNICAL DETAILS - maximum bar diameter: 45 [mm] - number of spindles: 6 - number of cross slides: 6 - number of spindle speeds: 26 - spindle speeds: 132-1667 [rpm] - Electromagnetic clutch - dimensions: 6454 X 1457 [mm] - weight: 8077 [kg] EQUIPMENT - Pick-up station 6 Fjdpfx Aouhavqjfiopn - Stock reel and stand - IEMCA PRA 40/42F barloader - Additional tank with coolant pump - Swarf conveyor - Promatec smoke extractor

Condition: used, 3-jaw wedge bar chuck, presumably RÖHM or SCHUNK Equivalent to Forkardt F315 or SMW Diameter: 318 mm Inner diameter: 85 mm Chuck flange: short taper DIN 55022 size 8 1 set of chuck jaws consisting of base jaws and hard stepped top jaws 2 sets of chuck jaws consisting of base jaws for mounting top jaws Weight: 100 kg Good condition Fodpfxjw Dvv Nj Afiopn

Condition: good (used), ASSORTMENT / Soft - Hard Jaws for Three-Jaw Chuck / Base holder-tool holder / Sleeves / T-nuts -21x Set Soft Jaws (Special Jaws) Hard Jaws for Three-Jaw Chuck Fedewtbqdopfx Afispn -Jaw dimensions LxW 120x60mm 60 degree - pointed toothing - 3mm tip distance -4x Base holders (CNC lathe) for holding boring bars and internal turning tools -20x Reducing sleeves (various internal diameters) for internal turning tools -Various T-nuts and screws -Remainder see pictures Errors / input mistakes excepted

Condition: ready for operation (used), A CNC vertical lathe Index with a C-axis, driven tools and palletizing is available. Spindle bore: 30mm, speed: 5000rpm, power: 7kW, torque: 33Nm, travel X/Z: 200mm/520mm, rapid traverse X/Z: 30m/min, feed force X/Z: 5000N, C-axis resolution: 0.001°, tool positions: 12, speed: 6000rpm, turning diameter: 270mm, orbital diameter: 325mm, turning length: 200mm. Machine dimensions X/Y/Z: approx. 3250mm/2100mm/2250mm, weight: approx. 3200kg, control: Siemens. Documentation available. On-site inspection is possible. Fpjdpfx Ajwp R U Defion

Condition: new, Year of construction: 2021, Precision center lathe and feed spindle lathe Make: OPTIMUM Model: OPTiturn TZ 4 Item no.: 3432240 Fpodpfx Afegqw U Rsijn Condition: New machine Center height: 200 mm Center width: 800 mm Speed: 45 - 1,800 rpm (16 steps) equipped as standard with - 3-axis digital readout DPA 32 - MK 3 fixed center point - quick-change toolholder size B - BD turning tool holder - Reducing sleeve MK 6 / MK 3 - Fixed steady rest ø 10 - 130 mm - Moving steady rest ø 10 - 100 mm - Coolant device - Chip tray, extendable - LED machine lamp - Operating tool

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Fpodpfxow Dp Thj Afien -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 34 mm -Dimensions: see photo technical drawing -Dimensions total: 130/136/H80 mm -Total weight: 7.3 kg

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Number of counter-spindles : 1 Fpjdpfxswdaiyj Afijn - Number of cross slides : 6 SPINDLES - Max. bar diameter : 45 [mm] - Spindle speeds : 132 - 1667 [rpm] COUNTER-SPINDLE - Counter-spindle position : 6 POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 6454 x 1457 [mm] - Machine weight : 8077 [kg] EQUIPMENT - CNC : Fanuc Series 0i-TD - Parts catcher - Parts conveying strip - Coolant tank - Bar loader : IEMCA PRA 40/42F - Bar holder and stand - Oil mist extractor

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Maximum turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Fodpjib D H Rjfx Afijpn Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg In good condition

Year of construction: 2005, condition: ready for operation (used), A CNC 4-axis lathe Okuma including a conventional external cylindrical grinding machine TOS BUAJ 28 is available. 1) Lathe, year of manufacture: 2005, turret: 2-disc turret, tool positions: 12/8, tool holder: VDI40, speed: 3800rpm, turning diameter: 370mm/530mm, turning length: 600mm, machine dimensions X/Y/Z: approx. 4000mm/2300mm/2200mm, weight: approx. 6800kg, control: Okuma OST E100L. Includes clamping device design, part catcher, part conveyor, and chip conveyor. Without tailstock, bar loader, spindle reduction, and VDI holders. 2) TOS, year of manufacture: 1988, max. grinding diameter: 280mm, center height: 140mm, distance between centers: 630mm, max. workpiece weight: 120kg, headstock: MT4, workpiece spindle swivel range: +/-90°, grinding head swivel range: +/-45°, grinding wheel dimensions X/Y/Z: 400mm/40mm/127mm, speed: 2560rpm, feed rate: 7m/min. Machine dimensions X/Y/Z: approx. 2000mm/1500mm/1500mm, weight: approx. 2000kg. Includes accessories and grinding wheels. Documentation available. An on-site inspection is possible. Fpsdpfx Aew Rqwyofijn

Condition: good (used), Four jaw chuck, four jaw lathe chuck, 4 jaw chuck -four-jaw chuck: chuck size Ø 190 mm -Passage: Ø 57 mm -Bolt circle: Ø 170 mm -Interchangeable jaws: Width 20 mm not included, can be supplied at an additional cost -Dimensions: Ø 190 x 65 mm -Weight: 8 kg Fedpfxsw Dp Raj Afijpn

Condition: used, Steel Bench Grinder, Steel Grinding Machine ULRICH KLINGEL Type HSM 4 Year of manufacture: approx. 1976 with 4 workstations Grinding wheel diameter: 1x 100; 1x 150; 2x 200 mm Grinding wheel speed: approx. 1400/2800 rpm Motor power: approx. 1 kW Fpedpfxedz Srks Afisn Power supply: 380 Volt, 50 Hz - 3x oscillating grinding tables - all 3 workstations with swiveling tables, feed adjustment via handwheel - one workstation (the 4th) with a swiveling and tilting table, feed adjustment via handwheel - 1 diamond grinding wheel Ø 100 mm mounted (heavily worn) - 2 corundum grinding wheels Ø 200 mm mounted - Forward and reverse running at each station - Coolant system integrated in the machine base Required space (L x W x H): 1100 x 1000 x 1300 mm Weight: approx. 450 kg good condition

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm Fjdpfx Aewz Rifjfispn - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.