Three-jaw chuck

Schunk Ortlieb SSF60/8

Condition: new, Year of construction: 2025, For current prices and delivery times, please contact us. Dimensions and weights: Length (product): approx.3265mm Width/depth (product): approx.1065mm Height (product): approx.1550mm Weight (net): approx.1965kg Working ranges: Center height: 230mm Center width: 2060mm Circumferential diameter over machine bed: 460mm Circumferential diameter in the bed bridge: 690mm Swing diameter over cross slide: 270mm Turning length in the bed bridge: 240mm Bed width: 300mm Speed range: Number of speed ranges: 12 Speed range: 25 - 2000min¯¹ Electrical data: Power drive motor5.5kW Supply voltage400V Mains frequency50Hz Cooling lubricant system Cooling lubricant system Coolant pump output: 125W Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar passage diameter: 58mm Steel holder max. mounting height: 25mm Spindle cone: MK 6 Tailstock: Tailstock holder: MK 4 Tailstock quill stroke: 130mm Tailstock quill diameter: 60mm Pitch: Pitch metric:0.1 - 14mm/rev Number of leads metric: 41 Pitch inch: 112 - 2Gg/1" Number of pitches inch:41 Pitch Diametral Pitch: 4 - 112DPI Cjdpfxeq Ukbps Aa Ejpw Number of pitches Diametral Pitch: 50 Module thread pitch: 0.1 - 7mm/rev Number of module thread pitches:34 Travel distance: Top slide travel: 125mm Travel of face slide: 285mm Bed slide travel: 1805mm Feed rate: Feed range longitudinal: 0.031 - 1.7mm/rev Number of longitudinal feeds: 42 Feed range flat: 0.014 - 0.784mm/rev Number of feeds flat: 42 Electrical connection: Total connected load: 5.8kW

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 330 mm Cpedpfx Aast Hxbwe Ejw z-travel 350 mm total power requirement 6,3 kW weight of the machine ca. 2 t dimensions of the machine ca. 736 m

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. Cpsdpfx Aouxrv Hsa Ejw Technical data shown on pictures.

Condition: new, Precision control and lathe Make: OPTiturn Model: TH 4210 Item No.: 3462050 Condition: new machine Tip height: 210 mm Top width: 1,000 mm equipped as standard with: -Machine base -Quad steel holder -Light machine -Reducing bushing MK 6 / MK 4 Cpedpfx Aodbgxcja Ejw -2 fixed centres MK 4 -Fixed bezel, 15-105 mm -Bezel running with 10-65 mm -Chuck guard, electrically protected -Coolant system -Change gears set -Oil -Control tool -Manual

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Codeu Rptyjpfx Aa Espw Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: used, Year of construction: 2014, total height: 1,950 mm, total length: 2,400 mm, total width: 1,600 mm, Empty weight: 2.000 kg Price: On request - Year: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 3098034 - Drive system: CNC - Centre height [mm]: 450 - Swing over bed [mm]: 900 - Distance between centres [mm]: 900 - Bed width [mm]: 445 - Spindle bore [mm]: 60 - Max. spindle speed [rpm]: 1800 - X-axis travel [mm]: 203 - Z-axis travel [mm]: 762 - Transport dimensions: 2400mm x 1600mm x 1950mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Cedpfx Aaoxq Aqws Eopw Lukas van Rossum

Condition: used, machine/vehicle number: 1 284 066, Chuck Ø: 200 mm Bore through: 50 mm Mounting, short taper according to DIN 55027: size 6 outside-Ø of the clamping cylinder: 290 mm Overall height (clamping cylinder to chuck front without jaws): 150 mm Cpedpfjcm Tgkox Aa Ejw pneumatically operated

Condition: excellent (used), Year of construction: 2019, Traverses X Y Z: 762 x 406 x 508mm, Table 915 x 355mm, Spindle speed 0 - 12000rpm, Spindle taper BT40, Spindle Motor 40Hp, HAAS Control, 30 Station ATC, coolant Cpedsx Dk Evspfx Aa Esw

Condition: used, Year of construction: 2013, turning diameter over bed slide: 435 mm, turning diameter over top slide: 245 mm, center height: 210 mm, center width: 1,500 mm, overall weight: 1,700 kg, Technical data Manufacturer: Weiler Model: DA 210 AC x 1500 Year of manufacture: 2013 Swing diameter over bed: 435 mm Swing diameter over cross slide: 245 mm Centre height: 210 mm Centre distance: 1,500 mm Spindle bore: 52 mm Speed range: 20 – 2,500 rpm, stepless Drive power: 10.5 kW Dimensions (approx.): L 2.2 x W 1.0 x H 1.7 m Weight: 1.7 t Equipment • Stepless speed control • HEIDENHAIN digital readout on 3 axes • 3- and 4-jaw chucks, manufacturer Röhm Duro • Multifix toolholder + 10 inserts • Collet chuck Fahrion + approx. 33 collets • Fixed and travelling steady rest • Various live and dead centres + drill chuck • Coolant system • Documentation HEIDENHAIN ND 780 digital position display • 3-axis readout for bed, cross slide, and top slide • Tool memory for 16 tools, with one reference point per axis Csdpfx Aasykakps Ejpw • Summation key for Z and Zo • Switchable between imperial/metric • X-axis traverse as radius or diameter display • Delta key for "distance-to-go" display to zero • Display resolution up to 1 µm • "Freeze" actual position • Taper calculator All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 2021, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 508 mm, feed length Z-axis: 635 mm, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, nominal power (apparent): 26 kVA, torque: 122 Nm, controller manufacturer: HAAS, Used Machining Center Brand: HAAS Model: VF-4 Year: 07/2021 Serial number: 1183245 Cpedpjxqct Sjfx Aa Esw Operating hours: Spindle on time: 6,000h Specifications: - Travels (X, Y, Z): 1270mm, 508mm, 635mm - Spindle-to-table distance (Min. - Max.): 107 - 742mm - Spindle speed: 8100 rpm - Spindle taper: ISO 40 - HAAS CNC Control - HaasDrop (for wireless file transfer to CNC) - Rigid tapping; synchronized tapping, with integrated tapping cycles and up to 8 retract speeds. - Safe Run; a HAAS Control software function that reduces the risk of significant damage in case the machine is impacted. - Tool changer carousel: 20 tools - Includes early power-failure detection module. - Coolant tank: 208 liters with coolant kit - Variable-flow coolant pump allows control of coolant flow and pressure via M-codes. - Maximum tool diameter: 89mm (adjacent tool slots filled) - Maximum tool weight: 5.4kg - Table dimensions: 1321 x 495mm - Maximum table load: 1588kg - Maximum rapid traverse (all axes): 25.4 m/min Included options: - Preparation for through-spindle coolant - Auger-type chip conveyor - Programmable coolant nozzle, multi-position device that automatically and precisely directs coolant to the cutting tool