Interchangeable jaws power chuck 4 sets

unbekannt Aufnahme 29/21 mm

Condition: good (used), Year of construction: 1997, Technically in good condition and functional. Year of manufacture 1997. Max. turning diameter 250 mm. Max. diameter over bed 530 mm. Max. turning length 500 mm. Length x Width x Height approx. 3315 mm, 1895 mm, 1900 mm. Machine weight approx. 6 tons. Pgjdpfxjwn Dbno Adnow

Condition: new, Year of construction: 2024, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Pjdpelht H Eofx Adnjgw Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, 550 mm 550 mm 550 x 550 mm saw band length 5980 x 41 x 1,3 mm table height 800 mm band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,8 t dimensions 3,0 x 2,15 x 2,2 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically Podpjfg E Hwofx Adnegw • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: good (used), Year of construction: 2007, turning length: 1,065 mm, turning diameter: 470 mm, Chip conveyor Pgsdpfxswq Rpwo Adnew SMW 315 3 chuck 2 x Radial live tooling holders 2 x Axial live tooling holders Spindle bore 80 mm BMT-Tooling system Tool measuring probe Spindle hours 6960 / 6270 Running hours Max. turning Ø: 470mm X-Axis: 260mm Z-Axis: 1065mm Spindle bore: 80mm Speedrange: 4200Rpm Spindle power: 30kW ATC / revolver: 12 BMT Tool system Speed live tools:6000Rpm Power live tools:7,1kW Length: 3310mm Width: 1900mm Height: 1970mm Weight: 6100kg

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 mm capacity 45 degrees: round 680 mm capacity 45 degrees: square 600 mm capacity 45 degrees: flat 870x600 mm capacity 60 degrees: round 580/550 mm capacity 60 degrees: square 530/450 mm capacity 60 degrees: flat 550x450 mm saw band length 8140 x 54 x 1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 5,3 t dimensions of the machine ca. 5,75 x 4,2 x 2,75 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with Pedpfx Adjfg E Hnjnogw a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Pgodpfx Ajfg E Hpsdnjw Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 420mm, turning length: 820mm, spindle bore: 105mm, speed: 3000rpm, spindle power: 22kW, travel X/Z: 280mm/820mm, tool positions: 10, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 4400mm/2100mm/2300mm, weight: approx. 6000kg, control: Mitsubishi M-720BM (MAPPS 2), operating hours: 10000h. Including various accessories. The driven tools have never been used, only the Y-axis has run. Measuring arm and ball screw of the Y-axis are as good as new. Documentation available. On-site inspection is possible. Pgodjv I U Iyjpfx Adnjw

Condition: new, capacity 90 degrees: round 350 mm Psdpfx Aofgyicodnogw capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: good (used), Spectro CIROS CCD Water Analyser - height: 105cm - width: 150cm Psdefiqn Uopfx Adnjgw - depth: 75cm Good condition fully functional can be inspected and tested on site. Shipping also abroad. Inspection : Basically I would like to point out that in order to avoid misunderstandings, the article can be inspected and tested under power before purchase. Please ask questions before purchase to avoid any ambiguity. If you have general questions or would like to make an appointment for a viewing, I can be reached at any time at the telephone number below. Errors in the description and prior sale reserved. The value added tax is shown separately on my invoices. Dispatch with forwarding agent.

Condition: good (used), Year of construction: 2000, Daewoo Puma 230, year of manufacture 2000, Fanuc 18 iT control, turning length 548 mm, turning diameter 350 mm, 10-position turret, tailed tailstock, three-jaw chuck Ø 254 mm, tool measuring arm, swarf conveyor, coolant system, main spindle newly mounted, Pgodpewx I Efefx Adnew flat guides, accessories,