Used 4 Axis Machine for sale (103,061)

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 31600 € 603.56 € 2050 mm 6 mm 6 mm 4 mm 4 mm Kedpfxeyb Szbo Ah Nsll 3 mm 150 mm 150 mm 130 mm 1,5 / 6 m/min 4 kW 4250 mm 960 mm 1100 mm 2800 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 57000 € 1077.3 € 2550 mm 13 mm 13 mm 10 mm 10 mm 8 mm 260 mm 260 mm 200 mm 1,5 / 6 m/min 7.5 kW 4800 mm 1600 mm 1550 mm 6800 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Ksdpfx Ajyb Sy Roh Nell Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 26300 € 502.33 € 2050 mm 4 mm 4 mm 3 mm 3 mm 2 mm 130 mm 130 mm 130 mm 5 m/min 2,2 + 1,1 kW 3800 mm 1150 mm 1110 mm 2450 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays Ksdpfx Ahoyb Sy Dj Njll hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT: overhead crane side supports NC control variable speed

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 48100 € 918.71 € 2550 mm 9 mm 9 mm 7 mm 7 mm 5 mm 220 mm Kljdpjyb Sywofx Ah Nel 220 mm 160 mm 1,5 / 6 m/min 5.5 kW 4900 mm 1150 mm 1250 mm 4600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 25200 € 481.32 € Kljdoyb Syqepfx Ah Nol 1050 mm 2.5 mm 2.5 mm 2 mm 90 mm 4,5 m/min 2.2 kW 2250 mm 1000 mm 1500 mm 900 kg FOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE) 4 rolls NC control with touchscreen Top roll driven by hydromotor and plantary gearbox Hydraulic drop end Mobile control panel Hardened rolls Operating manual in English or German OPTION: Feeding table price on request

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 52700 € Kledpfx Aheyb Syke Nol 996.03 € 2550 mm 10 mm 10 mm 8 mm 8 mm 6 mm 245 mm 245 mm 180 mm 1,5 / 6 m/min 7.5 kW 4800 mm 1600 mm 1470 mm 6170 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 49900 € 953.09 € 2050 mm 13 mm 13 mm 10 mm Kljdpfoyb Sydox Ah Njl 10 mm 8 mm 245 mm 245 mm 180 mm 1,5 / 6 m/min 7.5 kW 4300 mm 1600 mm 1470 mm 5450 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: used, Year of construction: 2014, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: No - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - Type milling table: Beam table - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1550 - Z-axis working range [mm]: 160 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets Kljdsx Hwhxjpfx Ah Njl

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, overall weight: 12,500 kg, We offer in very good condition Hermle C42U Dynamic with following options: Dynamic variant with Ø800 x 630 table Ksdpoya I Diefx Ah Nell Internal coolant with paperbelt filter Heidenhain Touchprobe Blum Laser

Year of construction: 2003, condition: used, Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm- Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW Kodpfeyatffjx Ah Nsll - Feedspeed: 5-20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed spindle 2: 7.000 rpm. - Transport rollers D (hardened): 140 mm - Length of infeed table: 2.000 mm - Hardened machine tables - Guide groove in machine table - Suction nozzles 2x140 mm, 1x160 mm - Volume flow: approx. 5,500 m³/h - Volts/Hz: 400/50 - Location: Blomberg warehouse from 01/2026

Condition: excellent (used), Year of construction: 2017, Machine model: ALZMETALL GS 1200 Year of manufacture: 2017 Technical specifications: 1. Machine concept: · Gantry design for closed force flow · All dynamically stressed components made of spheroidal graphite cast iron EN-GJS 500 (GGG50) 2. Working area: · X-axis travel: 1000 mm · Y-axis travel: 1200 mm · Z-axis travel: 800 mm · Distance spindle–rotary table min./max.: 167 mm / 967 mm 3. Control system: · Contour control: Heidenhain TNC 640 with digital drive control · Control panel: rotatable and pivotable · 19" TFT color flat screen with touch pad · Hard disk, linear and circular interpolation, helical interpolation, 3D interpolation · Look-ahead function (1024 blocks) · Standard drilling and milling cycles, probing cycles · Parallel operation, file management Kjdpeyag Tvefx Ah Njll · Programming in Heidenhain plain text and DIN/ISO · Graphical support for free contour programming · Multiple zero point tables · Interfaces: 1× V.24/RS-232-C (up to 115 kbit/s), 2× Gigabit Ethernet (1000 Base-T) 4. Lubrication: · Central grease lubrication for all axis guides and drive systems · Permanent grease lubrication for the high-frequency motor spindle · Lubrication interval control via PLC 5. Coolant and chip removal: · Only coolant with a high mineral oil content allowed · No synthetic or semi-synthetic agents · Cooling system designed for water-based agents · For emulsions: flash point > 140°C · Fire protection requirements for oil-based agents and flammable materials (e.g. magnesium) 6. Hydraulics/Pneumatics: · Hydraulics: max. 140 bar, max. 6.8 l/min · Pneumatics: 2 channels, max. 8 bar, max. 4.8 l/min 7. Accessories/Options (selected items): · Electronic handwheel HR 510 (portable) · 3D probing system with infrared transmission (M&H Inprocess, type IPR 40.01) · Safety foot confirmation switch for setup mode · Continuous air operation without lubrication interval (max. 10 bar pressure) · Rinsing hose with spray gun incl. pump · Preparation for stationary extraction system (2 units, manufacturer Reven) · Production package C: chip conveyor with coolant tanks, band filter, pumps · Safety laminated glass window, automatic roof cover 8. Machine enclosure: · Full enclosure made of sheet steel 9. Table data: · Max. table load: 2500 kg (balanced) · Rotary diameter on C around center A-axis: Ø 1220 mm · Swivel diameter on A around center X-axis: Ø 1240 mm · Rotary table C-axis below center A-axis: max. 100 mm 10. Tool changer: · Max. tool weight per chain: 250 kg · Chip-to-chip time: approx. 7 s Reference tool Ø 2/1. DS6, in HSK T100 holder

Condition: used, Year of construction: 2016, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2016 Control : Heidenhain TNC 640 Speed : 12000 rpm Movement X/Y/Z : 400/350/350 mm Spindle: Technology:Directdrive Speed:12.000 rpm Power (max.):13 kW Torque (max.):95 Nm Taper:SK40 Kedpfx Ajyad A Ijh Nell NC-Swivelroundtable: B-Axis:-50°/+110° C-Axis:360° Clampingsurface:ø450 mm Tableloading (max.):200 kg In general: Toolmagazine:48 Stations Rapid travers in X/Y/Z:48 m/min Equipment/Accessory: Positionsensor:Direct Scales in X/Y/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with filter and High-pressure, 30 bar Workpiecemeasurement:Touch probe, Heidenhain TS740 Toolmeasurement:Laser, Renishaw NC4 TX Setup operations:Electronic Handwheel Further Equipment:Spindlechiller Further Accessory:Misc. used Toolholder

Condition: used, Line boring machine WEBO with 4 stations type B 20 make no. 376/13; 376/14; 376/27; 376/36 year of construction approx. 1970 drilling capacity 20 mm spindle adaptor MK 2 - long spindle sleeve drilling head distance 335 mm throat 260 mm pinol stroke 190 mm table size 350 x 1500 mm distance drilling spindle/table min.30 mm / max. 700 mm Spindle speed drill head 376/13 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/14 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/27 250, 355, 500, 710, 1000, 1400, 2000, 2800 rpm. Spindle speed drill head 376/36 180, 250, 355, 500, 710, 1000, 1400, 2000 rpm. Klodpfsihmwtox Ah Nsl Motor power 1,1 / 1,3 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 4 V-belt steps - drill head height adjustment via toothed rack and hand crank approx. 300 mm - height adjustable drilling table approx. 350 mm space requirement L x W x H 1750 x 1100 x 1900 mm weight 1900 kg good condition

Condition: good (used), Year of construction: 2020, 5-Axis CNC Machining Center - Universal - Manufacturer: MAZAK Machine Model: Variaxis J-500 Control Unit: Mazatrol SmoothG Klodpfxeyabu Is Ah Nel Year of Manufacture: 2020 Number of Controlled Axes: 5 TECHNICAL DATA Travel - X-Axis (mm): 350 - Y-Axis (mm): 550 - Z-Axis (mm): 510 - Swivel Range A-Axis (degrees): -120 / +30 - C-Axis (rotary axis, rotary and tilt table): (degrees): 360 Feed Rate X/Y/Z (mm/min): 8,000 Rapid Traverse - X-Axis (mm/min): 30,000 - A-/C-Axis: 10,800 degrees/min. Spindle - Max. Spindle Speed (rpm): 12,000 - Drive Power (ED) 100 / 40 (kW): 7.5 / 11.0 Tool Magazine - Tool Holder: BT40/CAT40 - Pull Stud: Yamazaki ANSI Type - Number of Tool Positions: 30 - Tool Diameter (mm): 90 - Tool Length (mm): 300 Machine Table: Swivel rotary table Pallet System - Pallet Changer: 2-position - Clamping Table Dimensions (mm): 500 x 400 Swivel Rotary Table - Rotary Table Diameter (mm): 500 x 400 - Max. Workpiece Weight (kg): 200 FEATURES + Through-spindle coolant 70 bar + Hinged belt chip conveyor + Oil mist extractor + Tool length measurement and breakage control + Additional interior lighting + Signal tower (3-color) Subject to change and errors in technical details and specifications.

Condition: excellent (used), Year of construction: 2022, 5-axis simultaneous machining center. Travel paths: X 900 mm, Y 850 mm, Z 700 mm. Max. spindle speed: 18,000 rpm Tool magazine positions: 80 Control system: Heidenhain Kjdpfx Aeyabkpjh Nell

Condition: excellent (used), Year of construction: 2013, 5-axis machining center (BAZ) Control: Heidenhain Kjdeyaba Depfx Ah Nell Travel paths: X 2000 mm, Y 600 mm, Z = H 800 mm, V 700 mm. Max. clamping weight (rotary table): 1200 kg Max. spindle speed: 18,000 rpm

Condition: excellent (used), Year of construction: 2016, 5-axis simultaneous machining center Year of manufacture: 2016 Röders proprietary control 1.) Working area: 1000 x 1050 x 600 mm 2.) Max. workpiece weight: 800 kg 3.) Milling spindle: 32,000 rpm 3.) Tool changer: 30 positions 4.) Guideway system: Hydrostatic on all axes 5.) Drive: Linear motors 6.) 5-axis machine, swivel range A-axis ±115°, rotary C-axis 360° 7.) Control: Röders RMS6 5.52 8.) Machine weight approx. 21,000 kg Klsdpfx Ahsyaa T No Nol 9.) Space requirement: 3500 x 5500 x 3600 mm with dust extraction

Condition: like new (used), Year of construction: 2016, The ONIX 3300 is a CNC machining centre with 3 controlled axes + 1 additional axis, specifically designed for drilling and milling operations on aluminium, PVC, light alloy, and steel profiles with a maximum thickness of up to 3 mm. The machine offers a working capacity of 3300 mm and is equipped with an 8-position automatic tool magazine, with the possibility of housing an angular head for machining on three sides of the profile, as well as a saw blade for end milling operations. The fully enclosed structure contains the electrospindle, which provides a power of 4 kW and a rotation speed of up to 18,000 rpm, ensuring high performance and excellent machining quality. The swivelling control console, positioned on the right-hand side of the machine, allows for easy and intuitive management of programs and controls during every phase of the production cycle. The ONIX 3300 is equipped with CNC control for the axes and an industrial PC for program management, complete with a 17” LCD monitor, 80 GB hard disk, and 2 USB ports. The programming language is ISO standard, with an operator interface based on the Windows XP platform, and dedicated programming software ITALSOFT – FLY CAM CAD-CAM 3D, designed to optimize machining operations and production cycles. Technical Features • Dimensions (LxPxH): 4600x1675x2260 mm - 182x66x89 in • Dimensions for transport (LxPxH): 4500x1250x2300 mm - 177.5x50x91 in • Weight: 1500 kg - 3306 lb • Nominal power: 6 kW • Absorbed power: 16 A • Voltage: 400 V three phase • Frequency: 50/60 Hz • Air pressure: 7 bar • Accuracy: 0.1 mm - 0.004 in Klodpfx Aewb D Stoh Nol • Electrospindle power: S1 4 kW - 0/18000 rpm • Maximum torque: 3.7 Nm at 12000 rpm • Tool holder adapter: ISO 30 • Spindle cooling system: Electric fan • Operation area: 1 • Machinable sides no.: 1 (3 sides with Angle head) • Standard clamps no.: 4 (manual) • Tool magazine: 8 tool places (on board the basement) • Clamping force: 130 kg per clamp • Zero reference point no.: 1 (manual) • Spray nozzles for lubrication: 1 on the electrospindle • Tank capacity: 2.2 litres • Slides greasing: Manual • Operating temperature range: From 10 to 35 °C • Humidity: 75 % • Standard colors: RAL 7032 / RAL 5018 • Chip conveyor system: Chip conveyor plate • Machine safety: Safety light screen • Operator interface Monitor: 17” LCD • USB port: On the control panel • Software: ITALSOFT CAD-CAM

Condition: used, Year of construction: 2007, High-performance CNC machining centre equipped with a 5-axis electrospindle for advanced machining operations on aluminium, PVC, light alloys, and composite materials. Technical Description: - 5-axis electrospindle – A=+/-125°, 12 kW with cooling unit - Automatic tool changer with 18 positions + Ø400 mm blade, protected and mounted on the gantry sliding along the X-axis - Working area – travel: X = 7500 mm; Y = 1500 mm; Z = 620 mm - Milling operations with linear and circular interpolation on the X-Y-Z axes - Machining on 5 faces - PENDULAR operation capability - No. 8 pneumatic clamps with automatic positioning - No. 2 pneumatic reference stops - Tool cooling system with minimal lubrication unit - Motorized conveyor belt for chip and scrap evacuation Kjdsvgl Rcopfx Ah Nsll - CNC, user and maintenance manual, CE certification included

Condition: used, Year of construction: 2013, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 3,355 mm, total length: 5,250 mm, total width: 3,573 mm, table width: 820 mm, table length: 3,500 mm, table load: 2,500 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Control Mazatrol Matrix 2 Table size 3500 x 820 mm Table load 2500 kg Number of pallets 1 Movement X-Y-Z-axis 3000 - 800 -720 mm C-axis (table rotation) 0,0001° B-axis travel ± 110° Spindle speed 35 - 18.000 R/min Spindle taper HSK-A63 Spindle motor 35-26 kW Magazin capacity 30 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Kjdpfxoxftkqs Ah Njll Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Year of construction: 2026, rotational speed (max.): 36,000 rpm, Perfect for: Highly efficient 3D milling of small workpieces – precise milling with high output Materials: Plastics, composite materials such as CFRP / GFRP, model-building materials, aluminum Industries: Automotive, aerospace, transport & logistics, leisure industry, sanitary, boatbuilding, automation Reference number: 1221 Availability: April 2026 Model: 5-axis CNC milling machine G-S-F/B (25-13) Spindle data: 8 kW / 6.4 Nm; 1,000–36,000 rpm; HSK E 40 Rapid traverse X/Y/Z: 80/80/60 Workpiece dimensions X/Y/Z: 2,500 x 1,300 x 600 Ksdpfx Aox Uw Stsh Nsll Control: SIEMENS – Sinumerik One with HT 2 handheld terminal Tool changer: 13 tools Tables: 1 rotary table Vacuum system: yes Tool breakage and length detection: Renishaw TS 27 R Other: upon request Year of manufacture: 2026 Condition: new

Condition: ready for operation (used), Technical Data – DECKEL MAHO CNC Machining Center General Information Manufacturer: DECKEL MAHO Machine type: CNC Vertical Machining Center Axes: X / Y / Z (optionally with B and C axes depending on configuration) Control: Heidenhain TNC 426/430PB Working Range: Travel X-axis: 710 mm Travel Y-axis: 520 mm Travel Z-axis: 520 mm Feed Drive Drives: AC servo motors Feed rate X/Y/Z: infinitely programmable up to 10,000 mm/min Rapid traverse X/Y/Z: 30 m/min Setup mode: 20 – 2,000 mm/min Input increment: 0.01 mm Position Measuring System Resolution X/Y/Z: 0.001 mm Position tolerance: with direct measuring system: 0.010 mm Main Spindle – Version 1 (Standard) Max. speed: 12,000 rpm Drive: AC servo motor / motor spindle Motor output: 10.0 kW at 100% duty cycle 15.0 kW at 40% duty cycle Speed range: stepless: 20 – 12,000 rpm Setup mode: 20 – 800 rpm Torque: available at the spindle, efficiency considered (see power diagram) Main Spindle – Version 2 (Option) Max. speed: 30,000 rpm Motor output: 15.0 kW at 100% duty cycle 20.0 kW at 40% duty cycle Speed range: stepless: 20 – 30,000 rpm Setup mode: 20 – 800 rpm Power diagram Power and torque charts available for: 12,000 rpm spindle 30,000 rpm spindle Designed for continuous operation (S1) and short-time operation (S6 – 40%) Working Spindle – Tool Interface SK version Tool holder: SK40 to DIN 2079 Steep taper shank: DIN 69871 A Tool clamping: hydraulic / mechanical Pull stud: DIN 69872 Form A or ISO/DIS 7388/2 Type B HSK version Tool holder: HSK-E50 to DIN 69893 Tool clamping: hydraulic / mechanical Tool Changer – SK Magazine positions: 24 (optionally 60) Max. tool length from spindle nose: 315 mm Max. tool weight (automatic change): 6 kg Max. total magazine weight: 80 kg (optionally 180 kg) Tool Changer – HSK Magazine positions: 24 (optionally 60) Max. tool diameter: 40 mm Max. tool length from spindle nose: 150 mm Required compressed air: 5.5 – 8.0 bar Work Table Clamping surface (standard): 1,000 × 600 mm Permissible table load: 800 kg NC rotary table (optional): Clamping surface: Ø 700 × 500 mm Kljdpoxzvn Dofx Ah Njl Load: 350 kg Weight & Transport Machine weight (standard): approx. 5,500 kg Max. installed weight (incl. workpiece, coolant, etc.): approx. 8,100 kg Transport weight: approx. 5,500 kg Transport dimensions (L × W × H): 2.75 × 2.02 × 2.73 m Media / Connection Values Compressed air: Minimum pressure: 5.5 bar Max.: 8.0 bar Room temperature: Operation: +15 to +35 °C Optimal: +20 to +25 °C Relative humidity: 20 – 75 % Noise level: < 80 dB(A)

Condition: like new (used), Year of construction: 2011, travel distance X-axis: 550 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 32 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, controller manufacturer: FANUC, controller model: Professional 5, workpiece height (max.): 500 mm, workpiece diameter (max.): 650 mm, workpiece weight (max.): 350 kg, total height: 3,200 mm, total length: 3,550 mm, total width: 29,000 mm, overall weight: 15,700 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 323, tool length: 300 mm, tool diameter: 70 mm, tool weight: 8,000 g, CNC controller: FANUC Professional 5 Axes X-axis travel mm: 550 Y-axis travel mm: 1000 Z-axis travel mm: 500 C-axis degrees: 360 (continuous rotation) / rotary encoder A-axis degrees: 150 (+30 120º) rotary encoder Feed rates m/min: X:32; Y,Z:40; Rapid traverse m/min: X,A,C:48; Y,Y:50; A,C:18 Kjdpfx Ahsvfmlre Nell Worktable Table dimensions mm: 500 Maximum workpiece size (D x H) mm: 650x500 Max. workpiece weight kg: 350 Spindle Spindle speed rpm: 20000 Tool system Tool holder: HSK-A63 Tool magazine slots: 323 Tool changer: Matrix Max. Tool Diameter 70 With occupied neighboring places mm: 140 Max. Tool Length mm: 300 Max tool weight kg: 8 Equipment Electronic Handwheel Chip conveyor Helical interpolation Custom Macro common variables (100) Machine running times Spindle Working: 0h (Retrofited) Basic machine dimensions / weight Length mm: 3550 Width mm: 2900 Height mm: 3200 Weight kg: 15700

Condition: like new (used), Year of construction: 2015, operating hours: 26,156 h, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: Siemens 840D, workpiece length (max.): 850 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 500 kg, total height: 3,100 mm, total length: 4,150 mm, rotational speed (min.): 1,200 rpm, spindle speed (min.): 12,000 rpm, Year of construction: 2012 CNC controller: Siemens 840D Axes X-axis travel mm: 600 Y-axis travel mm: 700 Z-axis travel mm: 600 C-axis degrees: 360º (0,001) B-axis degrees: -30º/180º (0,001) Feed rates m/min: 60 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6/6/5 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø630 Maximum workpiece size (D x H) mm: Ø630x850 Max. workpiece weight kg: 500 Table rotation speed rpm: 1200 Spindle Spindle speed rpm: 12000 Spindle drive power kW: 35/24 (40%ED/cont) Spindle torque Nm: 111/77 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 63 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 120 With occupied neighboring places mm: 80 Max. Tool Length mm: 450 Max tool weight kg: 15 Chip-to-chip time s: 4 Equipment Electronic Handwheel Chip conveyor Infrared probe Rotating inspection windows Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function NC swivel rotary table 3D quickSET MPC – Machine Protection Control Kedpfx Asxuiibjh Noll Machine running times Under power: 26156 Spindle Working: 16472 Basic machine dimensions / weight Length mm: 4150 Height mm: 3100 Weight kg: 10000

Condition: good (used), Year of construction: 2004, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, quill stroke: 100 mm, Universal Tool Milling Machine V/H Manufacturer: Emco Model: FB-4 Year of manufacture: 2004 Control: Heidenhain ND-760 display Technical specifications: ----- • Travel X-Y-Z: 450 x 300 x 350 mm • Clamping surface: 800 x 400 mm • Tool holder: SK-40 • Quill stroke: 100 mm • Milling head swivels ± 90° • Spindle: 50 – 2,500 rpm • Speed selection: 18 steps • Electric central lubrication • Machine lamp • Coolant system • Splash guard enclosure (foldable) • Weight: 1,550 kg • Dimensions LxWxH in mm: 1,485 x 1,500 x 1,700 mm Accessories: ----- • 4x machine leveling feet • Operating manual • Clamping wrench • Counter bearing for horizontal machining • Shaft set for horizontal machining • Table enclosure (currently removed) Two identical machines available, both serviced and partially overhauled in Q4-2025. Klsdpfx Aex Tzk Roh Nsl