4 roll bending machine buy used

Sort by
Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6

3-roller bending machine KRAMER RHM III 140/2500

4.750  €
Fixed price not including VAT
Submit request
Warstein, GermanyGermany dealership location
6472 km
1983
good (used)
4.750  €
Fixed price not including VAT
Submit request
Call
We offer you, an almost unused bending machine from the manufacturer Kramer. The machine went for a job and was stored since! Ba0wsvadwv Machine runs flawlessly. Bending length: 2500 mm Roll diameter 140 mm Material thickness: 2, 5 mm Weight: 2T The machine can be performed live with us in the camp. Our offer is aimed at commercial persons covered in the sense of the Gewerbeordnung GewO according to § 14. The offer is subject to change reserved, sale. Please enter your full cont... more
4

Rolls bending machine - 3 Rolls DUCCI G 3 - 625 - F

Bühl, GermanyGermany dealership location
6593 km
1985
used
Request priceCall
sheet width 2500 mm L23dv plate thickness 10 mm pre-bending 8 mm upper roll diameter ca. 240 mm lower roll diameter ca. 240 mm total power requirement kW weight of the machine ca. 7 t dimensions 4,85 x 1,4 x 1,7 m - with conical bending device - with extensions of bending rolls for fixing profile bending rolls - with DRO for adjustment of lower rolls more
4

Plate Bending Machine - 3 Rolls KRAMER RHM 80/2000/III

Bünde, GermanyGermany dealership location
6460 km
1983
used
Request priceCall
sheet width 2000 mm plate thickness 2 mm pre-bending 4 mm Onttjqh7 roll diameter 80 mm Drive 1,5 kW weight of the machine ca. 670 kg dimensions of the machine ca. 3 x 0,9 x 1,2 m Condition: ready for operation Electric 380 Volt Foot switch Asymetric roller arrangement, rear roll adjustment and lower roll adjustment over handwheel, elektr. safety control, upper roller forward swing-out. The sheet thickness refers to a strength of 400 N. Machine dealer with own stock of 2500 m² and cert... more
3

Plate Bending Machine - 3 Rolls BRONX

Willich, GermanyGermany dealership location
6368 km
used
Request priceCall
sheet width 3355 mm plate thickness 63,5 mm Gcwmlvv roll diameter 686 mm voltage 400 V total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
3

Roll bending machine Sharringhausen 3500 Sharringhausen Davi Faccin

15.000  €
Fixed price not including VAT
Submit request
Falisolle, BelgiumBelgium
6285 km
ready for operation (used)
15.000  €
Fixed price not including VAT
Submit request
Call
Bczvp9s9xt Sharringhausen 3 rolls, pre bending OK, 3500 x 28 mm nominal capacity, weight of the machine is about 34.000 kgs, no foundation required, width: 2500 mm more
5

motoric three-roll bending machine SCHÄFER SRMN

Minden, GermanyGermany dealership location
6476 km
1969
used
Request priceCall
working width max. 1,750 mm material thickness max. 22 mm roll diameter upper roll 300 mm Bcyxenz2bx roll diameter bottom roll 310 mm safety chuck for removal of metal sheet metal electrical data 380 V space requirements length - 4,600 x depth - 1,800 x height - 2,250 mm weight approx. 8,500 kg more
3

Plate Bending Machine - 3 Rolls DURMA 102/15

Barsbüttel/Hamburg, GermanyGermany dealership location
6495 km
1996
used
Request priceCall
sheet width:1050 mm plate thickness:1,5 mm diameter of upper and back rolls:57 mm lower roll diameter:60 mm Ucz7woyjh weight of the machine ca.:120 kg dimensions of the machine ca.:1600 x 600 x 1100 mm 1 used DURMA 102/15 3-rolls bending machine with following equipment: - asymetric roller arrangement - upper roll with fold notch - wire core grooves - upper roll swing-out more


4 roll ben...
daily

New machines via email!

Stay updated!
1

Plate Bending Machine - 3 Rolls NOSSTEC ( LUNA ) 8264-10/35

Bünde, GermanyGermany dealership location
6460 km
used
Request priceCall
sheet width 1020 mm plate thickness 3,5 mm roll diameter 90 mm total power requirement 0,75 kW weight of the machine ca. 310 kg Electric 400 Volt Foot switch Symmetry roll arrangement. This machine is in the following sizes obtainable: worhing length from 1020 until 2520 mm, max. plate thickness ( 400 N/mm² ) from 1 until 8 mm. Wuwzfu9x Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
6

Plate Bending Machine - 3 Rolls SCHAEFER SRMASY

Willich, GermanyGermany dealership location
6368 km
1969
used
Request priceCall
sheet width 1000 mm plate thickness 4 mm pre-bending . total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Nb3zd more
4

3-rolls hydr. profile bending machine Akyapak APK 101

18.900  €
Fixed price not including VAT
Submit request
Schlinckstrasse 1, 21107 Hamburg, DEGermany
6487 km
2017
excellent (used)
18.900  €
Fixed price not including VAT
Submit request
Call
Diese Maschine ist sofort am Lager Hamburg Listenpreis ab Werk € 27.200.- Diese Maschine hat 10 Betriebsstunden, Leasingrückläufer! Technische Daten: Ggqoycwd I - Stahl - flach 120 x 30 (d 600) mm I-Stahl - hochkant 100 x 20 (d 2100) mm Winkelstahl 80x80x8 (d 2000) mm Rohdurchmesser max. 100 x 3 (d 3000) mm Vierkantmaterial 50 x 25 x 2 (d 600) mm Vollmaterial - Dia. 60,0 (d 1000) mm Werkzeugaufnahme 80,0 mm Drehzahl 4,2 m/min. Gewicht 1.600 kg Vcequ98b Abmessung L-B-H 1040 x 1... more
5

PLATE BENDING MACHINE FACCIN 4 ROLL 4HEL/S 3172 (3000x80)

London, United KingdomUnited Kingdom dealership location
5926 km
2004
reconditioned (used)
Request priceCall
Plate width: 3050 mm Distance between the column: 3100 mm Capacity at a yield point of material of 260 N /mm2 Pre-bending: 65 mm bending: 80 mm Hnhiugy8c Rolling radius 500 mm Roller diameter: -top roll: 720mm -bottom rolls: 700 mm -side rolls: 600 mm No. of rolls: 4 Rotation speed: 2 - 4 m/1' equipped with a feeder Machine dimensions: -length 9300 mm -width 3500 mm -height 3650 mm Weight: 85 t more
4

3 - rolls - bending machine IMCAR SIHR 15-5

Köln, GermanyGermany
6414 km
1990
good (used)
Request priceCall
TECHNICAL SPECIFICATIONS • Working length 3100 mm • Diameter top roll 300 mm • Diameter lower roll 280 mm • Pre - Bending capacity with 260 N / mm² sheet thickness 10 I 13 I 14 mm • Bending capacity with 260 N / mm² sheet thickness 13 I 16 I 18 mm • Angel of the lower rolls 5 degrees • Motor power 11 KW • Tank hydraulic unit 170 l • Surface hardness of rolls 60 HRC Bczj9kuqm8 • Rotation speed 5.4 m / min • Pre - bending speed 550 mm / min • working height 1145 mm • Distance betwe... more
6

Plate Bending Machine - 3 Rolls FASTI 1041 (Sonder-)

Bünde, GermanyGermany dealership location
6460 km
1977
used
Request priceCall
sheet width 1860 mm plate thickness 0,75 mm pre-bending ja Qwivguwg3 upper roll diameter 68 mm work speed 2 m/min length of draw-in 500 mm diameter of lower rolls ca. 90 mm weight of the machine ca. 700 kg dimensions of the machine ca. 2,45 x 0,7 x 1,1 m Electric 380 Volt Special reflector plate bending machine with automatic curve control (templates) with asymetric roller arrangement, hydraulic rear roll adjustment and three roll drive. During automatic operation sequence a sensor valve... more
3

Rolls bending machine - 3 Rolls PRINZING RME70/103

Göppingen, GermanyGermany dealership location
6699 km
2015
used
Request priceCall
sheet width unbkt. mm plate thickness 1,8 mm pre-bending unbkt. Nc9nr total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
4

Plate Bending Machine - 3 Rolls IMCAR [...] 13 3/3

Ahaus, GermanyGermany dealership location
6367 km
used
Request priceCall
sheet width 2050 mm plate thickness 3,0 mm pre-bending 2,0 mm roll diameter 130,0 mm work height max. 800 mm bending speed 4,0 m/min total power requirement 5,0 PS weight of the machine ca. 2.500 kg. ca. 9vmiyalxh range L-W-H 2.800 x 725 x 1.150 mm more
6

Plate Bending Machine - 4 Rolls SCHÄFER SVRM

Willich, GermanyGermany dealership location
6368 km
1991
used
Request priceCall
sheet width 3000 mm plate thickness 30 mm pre-bending 20 mm digital readout work speed m/min diameter of upper rolls 405 mm diameter of lower rolls 400 mm side roll diameter 320 mm total power requirement 45 kW weight of the machine ca. t dimensions of the machine ca. m Mtp3d0 more
2

3-roller round bending machine Fasti 2000 x 4 mm

2.800  €
Starting price not including VAT
Submit request
Heinsberg, GermanyGermany dealership location
6354 km
good (used)
2.800  €
Starting price not including VAT
Submit request
Call
to bend light scratches on the reels Machine is prima, was used for a time to hand rolling set of stained steel. No major repairs, reliable. 2ra7ant9w The name is not on the machine, but on the purchase invoice Fasti. more
4

Plate Bending Machine - 3 Rolls PRAKO / WMW XZ 150/3

Barsbüttel/Hamburg, GermanyGermany dealership location
6495 km
used
Request priceCall
sheet width:1500 mm plate thickness:3 mm pre-bending: roll diameter:90 mm dimensions of the machine ca.:2380 x 730 x 1200 mm weight of the machine ca.:400 kg Mtxiok more
5

Plate Bending Machine - 3 Rolls CIDAN RD 1010/1,0

Bünde, GermanyGermany dealership location
6460 km
1997
used
Request priceCall
sheet width 1010 mm plate thickness 1 mm pre-bending ja diameter of upper rolls 50 mm diameter of lower rolls 55 mm weight of the machine ca. 155 kg dimensions of the machine ca. 1,6 x 0,4 x 0,4 m Condition: very good F08bggiom Manual bending machine with asymmetric roller arrangement, swing-out Top roller, conical bending by tilting the back roller and Longitudinal grooves. The sheet thickness refers to a strength of the Sheets of 380 N / mm². Machine dealer with own stock of 2500 m² and... more
3

Plate Bending Machine - 2 Rolls WJ 1012

Göppingen, GermanyGermany dealership location
6699 km
used
Request priceCall
sheet width unbek. mm plate thickness unbek. mm pre-bending total power requirement kW weight of the machine ca. t U2gumuwu2 dimensions of the machine ca. m more
5

Plate Bending Machine - 3 Rolls BIRLIK MSM 2030x2

Ahaus, GermanyGermany dealership location
6367 km
2000
used
Request priceCall
sheet width 2030 mm plate thickness 2,0 mm ST roll diam. toproll 100 mm weight 745 kg engine output 1,1 kW range L-W-H 2.500x520 xx 1.135 mm Bbdkucdfu7 more
3

Rolls bending machine - 3 Rolls HUVEMA HU W 1300 x 4,5

Bottrop-Grafenwald, GermanyGermany dealership location
6383 km
2018
used
Request priceCall
plate thickness 4,5 mm roll diameter 120 mm 1300 engine output 2,2 kW weight of the machine ca. 660 kg M70jz Electric foot operated roller. Heavy duty welded construction. The back roller can be adjusted for conical rolling. The upper roller can be turned away for easy access to the work piece. Comfortable use, suited for workshops and craft shops. eccentric rolling foot pedal hardened rollers heavy duty welded steel construction more
2

Plate Bending Machine - 3 Rolls HÄUSLER RMSA 2500/3

Willich, GermanyGermany dealership location
6368 km
used
Request priceCall
sheet width 2500 mm plate thickness 3 mm pre-bending total power requirement kW weight of the machine ca. 4 t dimensions of the machine ca. 5x2x1,5 m Dbtw3b29o more
5

Rolls bending machine - 3 Rolls SCHÄFER SMRVO

Niederlangen, GermanyGermany dealership location
6346 km
1973
used
Request priceCall
sheet width:3000 mm Yevtqenv plate thickness:35 mm pre-bending: mm diameter of upper rolls:520 mm diameter of lower rolls:368 mm total power requirement: kW weight of the machine ca.:50 t dimensions of the machine ca.: m - Smallest pipe shot to be achieved Diameter: 650 mm - with hydraulic folding bearing - with hoisting crane - Operation via separate control panel Machine is dismantled and can be loaded easily! more
4

Plate Bending Machine - 3 Rolls FASTI 106/20-2

Bünde, GermanyGermany dealership location
6460 km
1972
used
Request priceCall
sheet width 2040 mm plate thickness 2 mm pre-bending ja roll diameter 110 mm Drive 1,5 kW weight of the machine ca. 980 kg dimensions of the machine ca. 3,1 x 0,9 x 1,05 m Condition: ready for operation electric for three-phase 380 Volt Foot pedal 2897rchtu Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
13

Roll bending machine Piesok XZMP 3150/16 Bau 1979

ČeskoCzech Republic
7010 km
1979
good (used)
Request priceCall
Bending length: 3150 mm Bending thickness: 16 mm Bottom roll diameter: 116 mm Engine power: 30 kW M3uit Machine dimensions: 7900 X 1930 X 2500 mm Machine weight: 40000 kg more
6

Plate Bending Machine - 3 Rolls SAHINLER MRM - S 3050 x 2

Ahaus, GermanyGermany dealership location
6367 km
2003
used
Request priceCall
sheet width 3050 mm Bbppsnetka plate thickness 3,0 mm pre-bending 2,0 mm roll diam. toproll 160 mm min. dia. 240 mm engine output 4,75 kW weight 2.650 kg range L-W-H 4.850 x 720 x 1.050 mm more
2

Plate Bending Machine - 3 Rolls HUVEMA HU W1300x4,5

Krefeld, GermanyGermany dealership location
6378 km
2017
used
Request priceCall
sheet width 1300 mm plate thickness 4,5 mm pre-bending - diameter of upper rolls 90 mm diameter of lower rolls 120 mm 2,2 kW weight 660 kg dimensions of the machine ca. 2,0 x 1,2 x 1,4 m • unused 3-Bowl-Bending machine, Lkks7 • enables conical bending by adjustment of the lower rolls, • operation by foot pedal, • hardened rolls, more
6

Plate Bending Machine - 3 Rolls

Willich, GermanyGermany dealership location
6368 km
used
Request priceCall
sheet width 2500 mm Dixl7ynn plate thickness 15 mm pre-bending Ja/yes roll diam. toproll 250 mm roll diam. bottom roll 220 mm total power requirement kW weight of the machine ca. 8 t dimensions of the machine ca. 5x2,2x2 m more
3

Four-roller round bending machine DAVI IT 4R 13/D

Eilenburg, GermanyGermany dealership location
6747 km
1985
ready for operation (used)
Request priceCall
Offer details warehouse number 0820 Conventional control type Storage location Eilenburg camp Country of origin Germany Delivery available upon request Cargo basis EXW - ex-works (shipped free) Hhy0u90my Price on request Technical details maximum sheet thickness in bending / Max thickn: 10 mm Max sheet width / max width; 2550 mm Oberwalzendurchm / upper roll diam.: 280 mm Roll diam. Seitenwalzendurchm / side: 200 mm Power consumption / conneced load: 11 kW Weight / weight: 8.9 ton more
5

Plate Bending Machine - 3 Rolls FASTI 109-30/7

Bünde, GermanyGermany dealership location
6460 km
1980
used
Request priceCall
sheet width 3040 mm plate thickness 7 mm pre-bending ja roll diameter 225 mm main drive 11 kW back roll setting 4 kW weight of the machine ca. 5,3 t dimensions of the machine ca. 4,4 x 1,15 x 1,47 m Condition: ready for operation Electric 380 Volt Foot pedal Light barrier control L3jmb with asymmetrical roller arrgement and pre-bending. Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
5

Roll bending machine LOUVROIL-FRANCE B 120-40 Bau 2006

ČeskoCzech Republic
7010 km
2006
good (used)
Request priceCall
Max. bending length: 1200 mm Max. bending strength: 4 mm Cs0xgtyo Cylinder width: 1250 mm Machine dimensions: 1500 x 2400 mm Machine weight: 850 kg more
4

Plate Bending Machine - 4 Rolls RAS 44.4

Ahaus, GermanyGermany dealership location
6367 km
used
Request priceCall
sheet width 2050 mm plate thickness 1,5 mm roll diam. toproll 75,0 mm side roll diameter 75,0 mm Ckfsepa3 weight of the machine ca. 842 kg. range L-W-H 2.400 x 900 x 1.140 mm more
6

Plate Bending Machine - 3 Rolls FACCIN ASI/M 3015

Möckmühl-Züttlingen, GermanyGermany dealership location
6645 km
2006
used
Request priceCall
sheet width 3050 mm plate thickness 3,0 mm pre-bending 2,0 Ba9quijg9s diameter of upper rolls 150 mm diameter of lower rolls 150 mm side roll diameter 150 mm roll speed 4 m/min main drive 2,2 / 2,45 kW total power requirement 4,5 kW weight of the machine ca. 2,63 t dimensions of the machine ca. 4,25 x 1,3 x 1,1 m * Pre-Bending * Conical bending device * Driven upper and lower rollers * Induction hardened rollers * Digital display for pickup roller * CE mark * Safety control with immediate s... more
6

Plate Bending Machine - 3 Rolls Davi MAV 4045

Malsch, GermanyGermany dealership location
6597 km
used
Request priceCall
sheet width 4000 mm plate thickness 40 mm pre-bending 29 no. of rolls 3 roll length 4050 diameter of upper rolls 450 / 370 mm pressure 270 t total power requirement 35 kW weight of the machine ca. 31 t dimensions of the machine ca. 7,0 x 2,0 x 2,1 m Technical specifications · Number of rollers: 3 8vga0jw8j Of which vertically adjustable: 1 upper roller (driven and interchangeable)) Horizontal Adjustable: 2 side rollers (individually driven) · Roll length: 4050 mm · Free stand through: app... more

Three rolls bending machine AKYAPAK AS 1030 x 90 x 3

Wiesbaden, GermanyGermany
6534 km
1998
excellent (used)
Request priceCall
working width: 1030 mm metal sheet thickness: 3 mm metal sheet thickness when bending: Cxn37av upper roller-Ø: 90 mm below roller-Ø: 90 mm weight: 500 kg space needed: 2000 x 740 x 1250 mm more
2

3roll plate bending machine 4000 x 40 mm Boldrini Ribo 3 roll 4000 x40 mm mit anbiege

Cesena, ItalyItaly
7116 km
ready for operation (used)
Request priceCall
3 ROLL MECHANICAL PLATE BENDING MACHINE MAKE BOLDRINI RIBO ITALY CAPACITY 4000 X 40 MM LOWER ROLLS INDEPENDENT PLATE PRE-BENDING -LOWER ROLLS DRIVEN WITH GEAR BOX / ELECTRIC MOTOR -OPEN FRONT DROP-END HYDRAULIC TOP ROLL HYDRAULIC TILTUP OPENING. Etbil9n POSTION READOUT DIAL GAUGES SURFACE ON THE ROLLS 4050 MM TOP ROLL 780 MM LOWER ROLLS 760 MM MACHINE IN GOOD WORKING CONDITIONS CAN BE INSPECTED UNDER POWER AS SHOW ON PICTURES. SERVICES INCLUDED IN... more
2

Rolls Roll Bending Machine Roll Bending Machine

Birmingham , United KingdomUnited Kingdom dealership location
5784 km
ready for operation (used)
Request priceCall
• Two rolls powered by a single gearbox and gear system for top and bottom rolls • SAE 1050 Quality certificated steel rolls with high tensile strength • Spheroid Cast Iron Main Frames • Mobile control panel by foot pedal • Conical Bending Device • Manual dropend • Top roll support system • Wire grooves at the end of the rolls • Precision Bending with Brake Motor • Built according to EC Safety Directives (CE) • Model IRM 2550×140 produced standard with motorised back roll • User’s Manual Ss3cos... more
3

Plate Bending Machine - 3 Rolls FASTI Rundbiege

Ahaus, GermanyGermany dealership location
6367 km
used
Request priceCall
sheet width 1020 mm plate thickness 1,5 mm ST Bcullm0cyw roll diam. toproll 55,0 mm weight 190 kg engine output manuell kW range L-W-H 650x1700x1.100 mm more
5

Plate Bending Machine - 3 Rolls WAGNER Bdv 20 / 3,55

Niederlangen, GermanyGermany dealership location
6346 km
1960
used
Request priceCall
sheet width:3550 mm plate thickness:27 mm pre-bending:20 diameter of upper rolls:440 mm side roll diameter:440 mm bending speed:3 u. 5 m/min power maindrive:23 kW Bbhn2z3w7j total power requirement:ca. 41 kW weight of the machine ca.:31 t dimensions of the machine ca.:9 x 3,2 x m more
15

3 roll - three roll bending machine Charlottenhütte

2.399  €
Starting price not including VAT
Submit request
Niedererlbach, GermanyGermany
6861 km
good (used)
2.399  €
Starting price not including VAT
Submit request
Call
sold is a used, fully functioning Charlottenhütte 3 roll three roll bending machine working width 1100mm - older variations - with integrated folding bench and alignment groove condition: see pictures scope of supply: see pictures full VAT invoice! Bcsl2pjm2u collection possible in 84172 Niedererlbach, shipping on request! no guarantee! more
2

Plate Bending Machine - 3 Rolls Famar A 312-15/3

Leipzig, GermanyGermany dealership location
6734 km
1994
used
Request priceCall
sheet width: 1500 mm plate thickness: - mm pre-bending: - plate thickness: ca. 3,0 mm distance between columns: 1645 mm roll dia. top roll: Ø 110 mm roll dia. bottom roll: Ø 110 mm Bht3mpgo weight of the machine ca.: auf Anfrage t dimension machine [...]: 2,5 x 0,6 x 1,0 m further technical features: - bending roll adjustment course 100 mm Operation takes place via control panel. more
1

Roll bending machine 3000 x 40 mm MG srl 3000 x 40 mm

Cesena, ItalyItaly
7116 km
2006
refurbished (used)
Request priceCall
Plate bending roll brand MG model AK340 year 2006 renovated and repainted Dimension 250x570 cm x H252 cm Grkf8kyl Weight 23ton #Capacity plate rolling 3000 x 40 mm #capacity plate pre-bending 3000 x 30 mm #3-roll hydraulic plate bending machine with dual pre-pinch #pyramid planetary configuration. #useful width on the rolls 3100 mm -upper roll size 450 mm -lower rolls size 410 mm #configuration: -Digital position readouts. -Hardening treatment of the 3 rolls. -Co... more
7

Hydr. Four roll bending machine ROUNDO PASS 185-2000

Kreuztal, GermanyGermany
6481 km
good (used)
Request priceCall
Technical data: working width: 2000 mm maximum bending power: 8.0 mm Prebending: 5.0 mm diameter upper roller: 185 mm diameter side bottom rollers: 160 mm diameter Middle bottom roller: conical bending device by tilting of the two is 160 mm tenwalzen weight: 3.9 tons Bcvaju8ps9 more
6

Three-roller round bending machine Akyapak AKBEND AS 90-10/3.0

3.250  €
Fixed price not including VAT
Submit request
Mühltal (Nieder-Ramstadt), GermanyGermany dealership location
6577 km
2016
good (used)
3.250  €
Fixed price not including VAT
Submit request
Call
Technical data: -Manufacturer: Akyapak -Country of origin: Turkey -BJ. 2016 Work range approx. 1050 x 3, 0 mm Before turn 3, 0 mm maximal bending 3, 3mm -to the conical rollers -with foot pedal -Electric 1.1 kw Weight approx. 570 kg -Roll diameter: approx. 90 mm -Engine with cast iron housing -Central rollers driven through a system of electric motor, circulation reduction gear and gear drive -Side swing-out top roller Main motor with brake -With wheel up and down moving behind a... more
6

3 - roller bending machine with manual drive KNUTH KR 12/2

2.500  €
Starting price not including VAT
Submit request
Hessisch Lichtenau, GermanyGermany dealership location
6575 km
2005
used
2.500  €
Starting price not including VAT
Submit request
Call
3-roller bending machine KNUTH type KR 12/2 with hand drive Masch. No. 134081 built in 2005 Working width max. 1250 mm Thickness 2 mm Roll diameter 86 mm -asymmetrical roller arrangement -Rear roller with Handwheel adjustable, 2 x screw 2 x worm gear for parallel delivery -Conical bending device by tilting the back roller -Under roller delivery via rack and pinion with Handwheel -Upper roller mounted and relieved turned -hardened rollers, for the machining of stainless steel suitab... more


4 roll ben...
daily

New machines via email!

Stay updated!
Save search query

to

to

Edit search
4 ROLL BENDING MACHINE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Find out more
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
Listing on Machineseeker
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close