Year of construction: 2016, condition: like new (used), functionality: fully functional, Complete line for steel wire fibres production, Model M-1 ZSN 35 Fibre bending and cutting machine Machine type: M – 1 ZSN 35 Dimensions and weight: 1200 x 1050 x 1620 mm; 1200 kg Material to process: Low carbon steel wire %C 0.05 ÷ 0.12 Product to process: Hooked end fibre 0.75 x 35 / Hooked end fibre 1.00 x 50 Max. number of wires to process: 15 Wire pay-off device Dimensions and weight: 5220 x 2500 x 2008 mm, approx. 2200 kg Fsdpfxewu Dado Aa Eefw Number of spools: 15 Max spool weight: 1000 kg Wire diameter range: 0.6 – 1.2 mm Spool type: Z2, Z3 PRICE: 190,000 EUR

Condition: good (used), Moroni nails machine MN80, 2 pcs Wire range: 20–80 mm length and 1.8–3.5 mm wire diameter Speed: 700 nails/min Motor: 7.5 kW In good working condition. Fsdpfxjwu Dm Ds Aa Eofw

Condition: good (used), Year of construction: 2001, functionality: fully functional, Nail machine (second-hand make) VITARI V 17/R (ITALY) (3 IDENTICAL UNITS) Year of manufacture: 2001 Wire diameter: 1.8 - 3.4 mm Nail length: 13 - 80 mm Output: 550 nails/min. Electrical installation: 380 V 50 Hz. Fodpfx Aewuqraoa Esfw Motor: 4 kW PRICE: 18,000 EUR / unit

Condition: used, functionality: fully functional, Year of construction: 1991, Production line for staples Type KU 2 Manufacturer WAFIOS previously used for iron wire suitable for staple production condition: used number of nails / minute: 200 technical condition: good wire Ø min 1.8 mm year of manufacture: 1991 wire Ø max 5 mm Ffjdpfx Ajwu Du Usa Ejw maximum nail length: 50 mm operating voltage: 380 V frequency: 50 Hz electrical cabinet: available pay-off: not available Serial no. 2 4160 034 country of origin: Federal Republic of Germany

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: M14L/8736, Offer Number: M14L/8736 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND / ZOM Type: TR4L Constr. year: 1976 Ffsdpfx Aaewi Tmvj Eow diameter range: 6-12 mm shaft length under head: 170 mm max. thread length: 102 mm output pieces/min: 125 Location: In our warehouse

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: M04L/9012, Offer Number: M04L/9012 Machinetype: pointing machine Info: vibratory feeder Ffedpoyi Dmfefx Aa Eew Make: HILGELAND Type: SKM 08 Constr. year: 2011 diameter range: 2-8 mm shaft length under head: 150 mm output pieces/min: 70-300 Location: In our warehouse

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: M14L/9004, Offer Number: M14L/9004 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Type: FN10/12-80 Constr. year: 2002/2024 diameter range: 6-12 mm shaft length under head: 180 mm max. thread length: 80 mm Ffjdewi T U Tepfx Aa Esw output - pieces/min: 100-330 Location: In our warehouse

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M14L/8732, Offer Number: M14L/8732 Ffjdpewi Szxefx Aa Esw Machinetype: thread rolling machine - flat die Info: with washer assembly Make: HILGELAND Type: FN-6/60 Constr. year: 1990 diameter range: 6 mm shaft length under head: 80 mm max. thread length: 62 mm output - pieces/min: 450 Location: In our warehouse

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, total width: 1,120 mm, total length: 1,240 mm, overall weight: 450 kg, load capacity: 150 kg, inner diameter: 220 mm, TECHNICAL DETAILS Load capacity per spool: 150 kg Inner diameter: 220 mm Inner belt width: 200 mm Ffjdpfx Aasyf Dbuj Eow MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,240 x 1,120 x 2,200 mm Weight: 450 kg EQUIPMENT Wiring diagram

Condition: ready for operation (used), functionality: fully functional, total width: 600 mm, total length: 1,700 mm, overall weight: 183 kg, coil width: 600 mm, mandrel diameter: 80 mm, TECHNICAL DETAILS Max. coil width: 600 mm Mandrel diameter: 80 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,700 mm x 600 mm x 800 mm Machine weight: 183 kg Fsdeyf Aiwopfx Aa Esfw Connected load: 400 V

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: M08L/8828, Offer Number: M08L/8828 Machinetype: 3 die - 3 blow transfer header Info: with PKO Make: JERN YAO Type: JBF-10B3S Constr. year: 2014 diameter range: 3-8 mm number of dies: 3 number of stations (incl. cut off): 4 cutting length: 70 mm shaft length under head: 12-60 mm output - pieces/min: 300 press power: 28 t Ffedpfowi Tdusx Aa Ejw Location: In our warehouse

Year of construction: 1987, condition: ready for operation (used), Max. coil weight: 10t, controls: SIEMENS S5, without documentation. Fjdpfegwg Udsx Aa Eofw

Year of construction: 1993, condition: ready for operation (used), Number of spooling positions: 2x 6, number of take-off pulley drives: 1 group drive, number of layings: 1 group laying, wire diameter: 0.15-0.3mm, bore diameter 22mm, winding speed: 20-120/min, max. winding strength: 78.5MPA, connected load: 4.5kW, material: stainless steel and brass, spool range: K160 to K250 acc. to DIN 46399, with group drive of take-off pulleys for all spooling positions and group laying for all spooling positions for conventional flanged spools. Ffedpfxon I T Tgj Aa Eew

Year of construction: 2016, condition: ready for operation (used), Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes. Ffjdpfx Aaen R Nhqj Esw

Year of construction: 1998, condition: ready for operation (used), Number of coil carriers: 12, rotor speed: 450/min, coil volume: 550cm³, wire tension: 1-16N, pitch: 5-90mm, connected load: 5kVA, with documentation, is already dismantled. Fedpfx Ajpgycija Eofw

Year of construction: 1995, condition: ready for operation (used), A Schenker spring coiling machine including a 2-finger coiling system (left and right), a multiple stroke device and a Böhm MRS-1 length measuring device is available. Wire diameter range: 0.4mm-1.8mm, spring outer diameter: 2mm-30mm, production capacity: 400 springs/min, max. material strength: 2400N/mm², spring outer diameter range: 2mm-30mm, wire feed length: 30mm/470mm/770mm/1200mm. Machine dimensions X/Y/Z: approx. 1150mm/900mm/1450mm, weight: approx. 1000kg. In 2008, the drive motor was replaced by a frequency-controlled servo motor. Documentation available. On-site inspection is possible. Ffjdpfov Ip Smex Aa Eew

Year of construction: 1995, condition: ready for operation (used), A defective CNC spring coiling machine BB Spring (Babbio) is available. Wire thickness range: 3mm-8mm, max. outer diameter: 120mm, wire processing speed: 90m/min, power: 35kW, machine dimensions X/Y/Z: approx. 2750mm/3150mm/2700mm, weight: approx. 4000kg. Including a winch plate for winching left springs and a torsion spring device. The motor and drive of the machine are defective. Documentation available. Fjdpfxovripms Aa Eefw

Condition: ready for operation (used), A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible. Fedpfx Aaeycwtfs Esfw

Year of construction: 1980, condition: ready for operation (used), Two bench coiling machines by Blume & Redecker are available. 1) AM 100, year of manufacture: 1980, max. wire diameter: 3.75mm, winding length: 600mm, max. spool diameter: 340mm. 2) AM 150, wire diameter range: 0.16mm–13.2mm, spindle distance: 80mm, center height: 300mm, swing diameter: 600mm, max. speed: 1000rpm, turning diameter: 500mm. Machine dimensions: approx. 850mm/1900mm/1350mm. An on-site inspection is possible. Ffjdpfx Asxqgx Ssa Esw

Year of construction: 1993, condition: ready for operation (used), A lattice-girder/girder welding system year 1993 is offered. Girder types: KT 8, girder height: 90mm-250mm. Upper chord: 5mm-12mm smooth/ribbed. Diagonal: 4mm-7mm smooth. Lower chord: 4mm-10mm smooth/ribbed. Maximum girder length: 14000mm, cutting grid: 100mm/200mm. Coil run-off tables: 5 units, maximum stacker stacking height: 500mm. Documentation available, inspection possible by arrangement. Fodpfxexz Ewhj Aa Eefw

Year of construction: 2001, condition: ready for operation (used), An automatic cutting, stripping, and crimping machine by Metzner for stranded wires and cables is available. Feed rate: 60m/min, cable length range: 160mm-999mm, cable length tolerance: +/-0.5%, max. stripping length 1/2: 70mm/40mm. Conductor cross-section range: 0.14mm²-6mm², outer cable diameter: 6mm, crimping force: 15kN, cutting accuracy per 100mm: +/-0.2mm, throughput: approx. 1200 wires/h. Machine dimensions X/Y/Z: approx. 1650mm/1250mm/1650mm, weight: approx. 400kg. On-site inspection is possible. Fodpfexqgx Eox Aa Ejfw

Year of construction: 1990, condition: ready for operation (used), Offered is a straightening machine with cold rolling unit. 2-fold wire coil payoff, installed are: GSG COMBI rolling stand year 1994, GSG KWG.3 rolling stand year 1991, roller driver GSG ERT year 2007, straightening and cutting unit Wafios RBK51M year 2000, wire drawing unit 1 pass, wire diameter 6.0mm-12.0mm, max. speed 120m/min, min. cutting length 1600mm, cutting rate up to 80cuts/min, inlet strength approx. 50daN/mm². Package dimensions for finished material up to max. 14000mm length, up to 1000 bars per bundle. Length of the system approx. 5000mm. The system is offered without safety fence. Viewing possible by arrangement. Fedpfxsxzikfs Aa Eofw

Year of construction: 1994, condition: ready for operation (used), Offered is a lattice girder/girder production machine year approx.: 1994. Girder height: 80mm-300mm, upper chord: 5mm smooth/ribbed, diagonal: 7mm smooth, lower chord: 5mm smooth/ribbed, girder length max.: 14000mm, cutting grid: 200mm, spool payoff tables: 5 pieces. Inspection is possible by arrangement. Ffjdpfx Asxz Ewboa Eow

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: M38L/9009, Offer Number: M38L/9009 Machinetype: pre-drawing machine Make: FASTENER ENGINEERS Type: DTVA 2050-36 Constr. year: 1997 diameter range: max 18 mm feeding speed: max 15 m/m capstan diameter: 900 mm Ffjdpowxdkqsfx Aa Ejw output: 20 HP Location: In our warehouse

Condition: used, Year of construction: 1996, Year: 1996 Serial Number: 15126 Model: H-360HA Ffjdpfx Aaoydp Tmj Eew Blade Size: 4420MM x 34MM x 1.1MM Blade Speed: 20 – 120 m/min Hydraulic Cutting Capacity: 360MM X 360MM