Cam-driven spring forming machine

JD 430

Year of construction: 1985, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-12mm Gscxckebw Run out table - 4m Speed -80' m/min. Reconstruction- 2022 Ledpfx Absh In Ths Aeru

Condition: excellent (used), Year of construction: 1974, Equippment: Lodpfxspq H Ups Ab Aoru 1 Gripper feeding system right hand side 1 Eccentricpress 90 kN 3 Standard-slide-units 3 Narrow-slide-units Working range: Wire diameter range: 0,5 - 3,5 mm Stripmetal width: max. 32 mm Feeding length: max. 170 mm Output: max. 250/min.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, coil weight: 15,000 kg, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness copper (max.): 4 mm, inner diameter: 508 mm, sheet thickness (max.): 4 mm, outer diameter: 1,800 mm, coil width: 1,600 mm, number of blades: 4, type of input current: three-phase, warranty duration: 12 months, straightening roller diameter: 75 mm, load capacity: 15,000 kg, space requirement width: 3,500 mm, space requirement length: 12,000 mm, space requirement height: 3,500 mm, feed roller diameter: 250 mm, number of feed rollers: 2, CTL Demaq Evo. New, stock. Coil up to 15 Tons D1800, 20-24" Nominal. Ljdeu Ey D Sjpfx Ab Asru Coil Cart hydraulic. 2 pinch-role of feeder and 11 straight rolls. Hardened and chromed. Servo Nidec in straightener and decoiler. 4 longitudinal knifes, axis (HC) 230 mm, knifes 300 mm. Transversal shear. Full made in Spain in our facilities. Optional other devices and configurations. The most advanced Demaq SPL machine. 2 units available.

Condition: excellent (used), Year of construction: 1998, Angel ES 330/80 HLS Closing 80 tons Year 1998 Scrow 35 mm Stroke volume 154 cm3 Lrsdpspdr Aijfx Ab Asu Enlarged clamping plate 660x560 Mould height min 200 mm

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Ledpfjxfrv Ejx Ab Aoru Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: excellent (used), Year of construction: 2010, loading capacity: max. 1.500 Kg. wire diameter range: 0,5 - 8,0 mm Lrsdpfxovck Hus Ab Asu coil outside diam. max. 1.000 mm speed: 0 - 80 U/min

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Lrsdpfsuzv Tzsx Ab Aou Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: ready for operation (used), Rotary indexing center RT100/12-26 Ljdoi Ewn Ejpfx Ab Asru Manufacturer: Pfiffner Serial number 1101141101 Operating hours: 42,500 Footprint: 14m x 8m

Condition: new, The CR 35 (up to Ø 3.5 mm) completes the range between the CR 23 (up to Ø 2.3 mm) and the CR 45 (up to Ø 4.5 mm). The machine has between 12 and 16 axes, below are the 12 basic axes: - wire feed - wire rotation - nozzle rotation Ljdpfx Ajvbdq Rob Aeru - servo spinner - 8 independent slides (8 axes) Optional (up to 4 axes): - servo cutter - servo spinners (additional) - lateral movement of winding finger - transfer for lifting the second (German-type) extension spring eyelet. Maximum feed speed: 54 m/min. Machine dimensions: 2.36 x 2.10 x 2.10 m. Machine weight: 2,300 kg. If you have any further questions, please do not hesitate to contact us.

Year of construction: 2017, condition: like new (used), 2D Wire Bending Machime Ljdomqk Tpspfx Ab Aoru Year - 2017 Manufacturer - VIBRA Wire diameter - 1-4 mm Capacity - 30pieces/ min Power - 3,5 kw