Used Wire EDMs with x-travel of 500-699mm for sale (73)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 35,300 h, Functionality: fully functional, A G I E (Switzerland) CNC-controlled wire EDM machine Type AGIECUT PROGRESS V 3 Year of manufacture 2004 EDM hours: 35,200 hours Travel (X/Y/Z) 500 x 350 x 426 mm Max. part size for clamping (X/Y/Z) 1,050 x 650 x 420 mm Max. workpiece weight (with/without bath) 400 / 800 kg Taper +/- 30°, 100 mm U/V axis travel +/- 70 mm Available wire diameters 0.20 - 0.33 mm Best achievable surface finish Ra 0.3 µm Max. cutting capacity 500 mm²/min Csb Hcev Tp Daoy Uujgt Machine dimensions (mm) 1,940 x 2,300 x 2600 mm Separate dielectric tank Including cooling unit The machine can be inspected under power. It currently has no defects and is still being manufactured.

Condition: refurbished (used), Year of construction: 2016, GF AgieCharmilles Progress VP3 Year of manufacture 2016 Travels: X = 500 mm, Y = 350 mm, Z = 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient Setup AGIE IPG-VP Generator AGIEVISION 5 Control System Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg Cjb Hcysv I T Hus Uuegt The machine will be cleaned and overhauled upon receipt of the order. You receive a 6-month warranty on all machine parts. We are also happy to offer commissioning and training.

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 395.900.219.1140, workpiece weight (max.): 1,000 kg, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,000 mm, input voltage: 400 V, rapid traverse X-axis: 600 m/min, rapid traverse Y-axis: 400 m/min, rapid traverse Z-axis: 400 m/min, tank capacity: 750 l, Equipment: documentation/manual, X, Y, Z axis travel: 600 x 400 x 400 mm Cgsb Hevq I I Sjcy Uujt Min./Max. distance table - chuck: 190-590 mm Min. surface roughness Ra 0.1 μm Dielectric tank capacity 750 l This machine is dismantled and ready for transport.

Condition: used, Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 5920633110015, workpiece weight (max.): 1,600 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, total height: 450 mm, workpiece height (max.): 450 mm, type of input current: three-phase, table width: 750 mm, table length: 600 mm, table load: 1,600 kg, worktable length: 750 mm, working range: 600 mm, worktable width: 600 mm, positioning accuracy: 0.05 mm, For sale Agie Chermilles Form 300 sinker EDM machine from 2015. The machine is functional and ready to use. The machine has dimensions of 2265 x 2110 x 2780 mm and weighs 4800 kg. Working ranges 600 x 400 x 450 mm. Work table size 750 x 600 mm. Maximum workpiece weight 1600 kg. Maximum electrode weight 50 kg. Cgeb Hcy Uev Sty Aouot

Condition: excellent (used), Workpiece dimensions max. 1050 x 800 x 295 mm Workpiece weight max. 1500 kg Stroke of X/Y/Z- Achse 500 / 350 / 300 mm Stroke of U/ V- Achse jeweils +/- 21 mm Control W21PA-2 Misc. accessories Cgjb Hcy Uov Hypgjust MARCELS MASCHINEN AG

Condition: excellent (used), Agie Wire EDM Model: AGIE Cut Classic V3 Control: AGIE X – axis Travel: 500mm Y – axis Travel: 350mm Z- axis Travel: 426mm Workpiece Length: 1050mm Work piece width: 650mm Work piece height: 420mm Work piece weight: 800 kgs Dimensions: 1940 x 2300 x 2600mm high Weight: 3460 kg Cob Hcyjv Hryws Uujgt

Condition: excellent (used), Year of construction: 2017, operating hours: 8,500 h, Functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, workpiece height (max.): 305 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 820 mm, type of input current: AC, table width: 840 mm, overall weight: 3,500 kg, table length: 640 mm, positioning accuracy: 0.003 mm, ### Price heavily reduced ### This machine is very well maintained and in very good condition. The machine is still in production. You can view and test this machine with power on. Price is ex works, without dismantling. Manufacturer: Mitsubishi Electronic Year of manufacture: 2017 MODEL: MV 2400R MV-R Series – Power for Precision Production hours: approx. 8,000 hours Application type: EDM / wire cutting Machine type: Wire EDM machine Technical specifications - Mitsubishi MV 2400R X-axis movement: 600 mm Csb Hcy Ujvq Rh Ujuogt Y-axis movement: 400 mm Z-axis movement: 310 mm Travel (X / Y / Z) in mm: 600 / 400 / 310 Travel (U / V) in mm: 150 / 150 (+/- 75) Max. workpiece dimensions (W x D x H) in mm: 1050 x 820 x 305 Max. workpiece weight in kg: 1500 Table dimensions (W x D) in mm: 840 x 640 Overall dimensions (W x D x H) in mm: 2687 x 3030 x 2150 Machine weight in kg: 3500 Price reduced.

Condition: refurbished (used), Year of construction: 2008, Functionality: fully functional, GF AgieCharmilles Classic V3 Year of manufacture 2008 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achieveable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Ceb Hsv Hbygscy Uusgt Available wire diameters: 0.15 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for comfortable Setting up AGIE IPG-V generator AGIEVISION 5 control Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine has already been cleaned, overhauled and tested by us. We would be happy to carry out an individual test cut for you. You receive a 6-month warranty on all machine parts. We would also be happy to offer you commissioning and training

Condition: good (used), Year of construction: 2000, Functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, total height: 220 mm, total length: 280 mm, total width: 240 mm, workpiece height (max.): 250 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, type of input current: three-phase, Agie Excellence 3, year 2000. Cgjb Hcyev Rgiho Uujt Working machine on display at our Semsales facility in Switzerland. Machine available immediately.

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 1,050 mm, total length: 710 mm, workpiece height (max.): 340 mm, workpiece width (max.): 570 mm, workpiece length (max.): 800 mm, type of input current: three-phase, overall weight: 1,000 kg, input voltage: 200 V, FOR SALE wireframe from 2014 in very good condition Cgjbov Sri Nj Hcy Uujt

Condition: used, Year of construction: 2006, Functionality: fully functional, machine/vehicle number: ATH ADV 3 with C AXIS, workpiece weight (max.): 2,000 kg, input frequency: 50 Hz, positioning accuracy: 0.005 mm, Description AGIE ADVANCE 4 Travel/ races (X/Y/Z) 550 x 350 x 400 mm Max. Workpiece dimensions 920 x 750 x 370 mm Surface support 870 x 550 mm Max. workpiece weight Workpiece weight (without bath) 2000 kg Max. electrode weight Electrode weight 80 kg Table/quill distance min. 215mm Max table/keel distance. 615mm Quill stroke 400 C-axis Integrated, 0 - 55 rpm Generator power 60 A Dielectric integrated Details • X axis:550 mm • Y axis:350 mm • Z axis:400 mm • C axis: Yes • Max workpiece length: 920 mm Cob Hcsv Rftley Uusgt • Max workpiece width:750 mm • Max workpiece height: 370 mm • Max workpiece weight: 2000 kg Conditions and size • Status:Visible • Condition: Good • Length:2050mm • Width:1800mm • Height:2868 mm • Weight:4200 kg Make offer / Make offer

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, X, Y, Z travels: mm 600 x 400 x 350 U, V travels: mm ± 50 Max. workpiece dimensions: mm 1.030 x 800 x 350 Max. workpiece weight: kg 1.000 Cgobov Rahqe Hcy Uust Max. conicity / height: ° / mm 10 / 80 Wire diameters: mm 0,15 – 0,30 Minimum roughness: μm 0,25

Condition: repair required (used), Year of construction: 2004, Functionality: limited functionality, workpiece weight (max.): 800 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, Equipment: fridge, We are selling a Sodick wire erosion machine. It was purchased new in 2004 and was in operation until 2023. The machine needs to be replaced with a screen, seals,... a major service is required. The machine is located in the Sodick demo center near Zagreb, we can provide all support: start-up of the line, installation, transport and official service. Cebsv Hw Dhs Hcy Uuogt For more information, we are available:

Year of construction: 2005, Condition: refurbished (used), AGIECUT Progress 3 Year of manufacture 2005 travels: X= 500 mm, Y= 350 mm, Z= 426 mm travels U/V-axis: +/- 70 mm maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.30 µm Maximum cutting rate: 500 mm²/min Glass scales on X- and Y-axis for increased precision Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage Maximum threadable height: 420 mm With manual front door (accessible from 1 side) Incl. AGIEJOGGER- hand box for comfortable set-up AGIE IPG high performance generator Cgsb Hcysgzv Sce Uust AGIEVISION control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be overhauled and extensively tested by us You get 6 months warranty on the machine. We are also happy to offer you commissioning and training

Condition: refurbished (used), Year of construction: 2007, operating hours: 15,125 h, Functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 200 mm, total length: 260 mm, total width: 280 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, type of input current: three-phase, overall weight: 3,300 kg, Charmilles Robofil 440SLP, 2007. Only 15,100 hours of work. Machine fully serviced and working. Viewable at our Semsales premises in Switzerland. Cgjb Hcysv Rbxws Uust

Condition: like new (used), Year of construction: 2008, operating hours: 1,120 h, Controller ARISTECH (similar as FANUC) Number of axes: 4 Table size 640 x 470 mm X Axis Travel 425 mm Y Axis Travel 300 mm Z Axis Travel 250 mm Max workpiece size 800 x 600 x 250 mm U Axis Available:standard Weight cca 3000 kg Dimensions LxWxH = 1860 x 2050 x 2100 mm The machine consist of following units 1. EDM machine 2. Controller cabinet 3. Water tank and pump 4. Water cooler 5. Transformer Cgjb Hcevvl Uasy Uust 6. Transformer Nr.2 (power supply) The machine was barelly used. Still unter power. It will be due to company liquidation.

Condition: used, TECHNICAL DETAILS - Table dimensions : 900 x 600 [mm] - Dielectric capacity : 1200 [l] TRAVELS - Travels on X/Y/Z axes : 550 x 350 x 400 [mm] Ceb Hcyjuhca So Uuogt - Travels on U/V axes : 550 x 350 [mm] - Rapid traverses rates (X/Y/Z) : 3 [m/min] - Rapid traverses rates (U/V) : 3 [m/min] - Max. taper : +/- 30 [°/mm] PART - Max. part dimensions : 1200 x 700 x 400 [mm] - Max. part weight : 1500 [kg] WIRE GUIDE - Wire diameter : 0.15 - 0.33 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 12 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2600 x 2600 [mm] - Machine height : 2340 [mm] - Machine weight : 2850 [kg] EQUIPMENT - CNC : CHARMILLES - Screen : LCD 15'' TFT - Remote control

Condition: used, Year of construction: 2010, Wire erosion / EDM Travel distance X: 500 mm Travel distanceY :350 mm Cgobsvtfpro Hcy Uuot Travel distance z: 250 mm max. workpiece size X: 960 mm max. workpiece size Y: 670 mm max. workpiece size Z: 245 mm max. workpiece weight: 850 kg with AWF ( Automatic Wire Feeding ) submerged

Year of construction: 1999, Condition: good (used), Control Fanuc Travels X / Y / Z: 520 x 370 x 410 mm Travels U / V: 120 x 120 mm cooling unit Csb Hcy Ued Ra Adsuogt

Condition: refurbished (used), Year of construction: 2003, Functionality: fully functional, AGIECUT Excellence 3 Year of construction 2003 Travels: X= 500 mm, Y= 350 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.10 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D AGIEVISION control unit AGIE IPG generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg Cebjrr Uzwj Hcy Uuogt The machine is cleaned, overhauled and thoroughly tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transportation, commissioning, cooler

Condition: excellent (used), Year of construction: 2015, operating hours: 6,609 h, Functionality: fully functional, machine/vehicle number: SL600Q-A0256, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 320 mm, workpiece height (max.): 340 mm, workpiece width (max.): 800 mm, workpiece length (max.): 570 mm, TECHNICAL DETAILS Workpiece dimensions flushing: 800 mm x 570 mm x 340 mm Workpiece dimensions submerged: 800 mm x 570 mm x 280 mm Maximum workpiece weight: 1,000 kg Work table dimensions: 1,050 mm x 850 mm X-axis: 600 mm Y-axis: 400 mm Z-axis: 320 mm UV-axis: 120 mm x 120 mm Maximum cone angle: ±25° (for workpiece thickness 130 mm) Wire diameter: 0.1 - 0.3 mm Maximum wire speed: 420 mm/s Wire tension: 3 - 23 N Weight of wire spool: 8 kg Processing method: flushing, submerged Table height: 995 mm Dielectric tank External dimensions (W x D): 825 mm x 2,400 mm Weight (empty): 500 kg Tank capacity: 850 l Filtration method: 3 replaceable paper filters Ion exchanger: Ion exchange resin (18 liter type) MACHINE DETAILS Without accessories: 2,635 mm x 2,865 mm x 2,300 mm With accessories: 3,920 mm x 4,215 mm Machine weight: 4,500 kg Cobjvw Ag Ao Hcy Uuegt Transport dimensions: 2,635 x 2,865 x 2,200 mm Operating hours: 67,181 h Cutting time: 6,609 h Air pressure: 0.5 MPa Air flow: 30 NL/min Power consumption: 13 kVA EQUIPMENT - Wire chopper (L-Cut) - Taper Flex 3D Optional extension: Solidworks and DemaCut can be purchased for an additional EUR 5,000.

Condition: good (used), Year of construction: 1998, Controller FANUC Series 16W Max size of wpc. 800 x 730 x 300 mm Max table load 750 kg X travel 520 mm Y travel 370 mm Cgjb Hceul Uwloy Uuot Z travel 300 mm U travel 120 mm V travel120 mm Dia of wire Ø 0,05 – 0,33 mm No. of axes 5 (X, Y, Z, U, V) Capacity of tanks 650 Liters Accessories - Dielectric cooler - Coolant unit - Interface RS232 - MPG - Automatic wire threading - Manuals

Condition: excellent (used), Year of construction: 2003, operating hours: 2,916 h, Functionality: fully functional, machine/vehicle number: P 032B1591, workpiece weight (max.): 1,000 kg, feed length X-axis: 550 mm, feed length Y-axis: 370 mm, feed length Z-axis: 410 mm, feed rate X-axis: 900 m/min, feed rate Y-axis: 900 m/min, feed rate Z-axis: 900 m/min, continuous power (apparent): 13 kVA, feed length W-axis: 120 mm, The subject of the sale is a Fanuc Robocut Alpha-1iB EDM machine. Ceb Hcy Uovwk Alsuogt The year of production of the machine is 2003. The machine has worked 2916 hours, including 178 hours of cutting. The machine has been described by the expert as efficient and in very good condition. Axis travel: X: 550mm / 900 mm/min Y: 370mm / 900 mm/min U: 120mm / 450 mm/min V: 120mm / 450 mm/min Z: 410mm / 900 mm/min

Year of construction: 1997, Condition: good (used), control Mitsubishi CNC travel X/Y/Z 500/350/300 mm max. workpiece weight 800 kg Cgob Hcysdv I A Ij Uuet table size 780x630 mm

Condition: reconditioned (used), Year of construction: 2021, Functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, GF Machining Solutions CUT P550 Pro Year of manufacture 2021 Uniqua control Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed of 400 mm²/min Best surface: Ra 0.08 µm Available wire diameters: 0.15 to 0.33 mm Incl. wire cutter Incl. 3D probe Dimensions of the complete system: 2600 x 2640 x 2340 mm Total weight of the system: 3300 kg The machine is already in our warehouse and will be cleaned, serviced and thoroughly tested after the order has been received. We would be happy to offer you an individual test cut on the machine. You receive a 6-month warranty on the machine. We would be happy to offer you commissioning of the machine. Cgob Hovyp Ufocy Uuet