Condition: ready for operation (used), Year of construction: 2023, Control Unit Brand KUKA Gksdpfxsx D Hzmj Ag Djf Model KRC4 Main Drive Number of axis 6 Additional Equipment Component holder (cradle) between the rotary tilting table and the counter bearing. L = 4250mm x 1000mm. 16mm holes as provided. Connection to the faceplates with standard Bräuer drilling pattern (installation height is still to be adjusted to ensure the largest possible turning radius). The component holder is designed for quick change. (Brauer Standard) These KUKA welding robots are featuring a turn-tilt module with a maximum load capacity of 2600kg and a KUKA KL4000 track. If you are looking to get high-quality welding capabilities, consider this pack of weding robots we have for sale. Contact us for more information about it. Application Types Welding

Condition: new, welding current max. 200 A open-circuit voltage 14 - 24 V Gkjdpfxsg U Tcce Ag Dsf connected load frequency 230 V weight 25 kg Dimensions (LxWxH) 500 x 200 x 300 mm Equipment: Hose package Ground cable Welding nozzles

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need for additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Gkjdpohwrhuefx Ag Djf CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: like new (used), Year of construction: 2018, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20RD.(Payload: 20kg, H-Reach: 2017mm, Robot Mass: 293kg, 2010.04) 1 x YASKAWA DX100 controller.(2010.05). 1 x IPG YLS-4000.(2017). 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD(S.N.:BIMO2W17013). Godoh Ad E Uopfx Ag Dekf Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Equipment: documentation/manual, Laser Cutting Machine Trumpf TruLaser 3030 Lean Edition Lasercapacity 3200W Type L20 Year 2012 Net 400V/50Hz Power 73 kVA Control voltage 24V Fuse 3 x 125 A Gsdpfxsx Drlqo Ag Dskf Air 7 -10bar Nitrogen connection 30 bar Oxygen connection 20 bar Hours Beam on 7755 Hours Laser on 25263 Machine is in excellent condition and completely modified by Trumpf in 2023. Complete documentation is available

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: A0045A0406, total length: 2,500 mm, sheet thickness (max.): 6 mm, A TruPunch 1000 in mint condition. Can be seen running in our building in Bruges. The machine has the following options: MultiTool, Threadcutting, Detection of sheet Gjdpfx Agjx Hi Eve Djkf

Condition: ready for operation (used), Year of construction: 2008, operating hours: 22,560 h, General Data Measurements width 540 Measurements depth 960 mm Measurements height 1050 mm Machine weight 196 kg Gkedpfx Agex D Hquj Djf Table Outer length 4500 mm Outer width 2000 mm This plasma cutting machine was manufactured in 2008. It features a CNC control MSNC500P Windows and a plasma source with a cutting range of 0.5 to 25/30mm, adjustable from 10 to 160 A for cutting. The flame cutting table measures 4500x2000mm, suitable for both plasma and oxyfuel cutting. It operates efficiently within a temperature range of +5 to +45 °C. Consider the opportunity to buy this MicroStep SPL-P 4501.25 plasma cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: new, Year of construction: 2025, Introducing the latest model of the CORMAK WL3000 industrial laser welder, which combines advanced FIBER technology with innovative design solutions, offering unparalleled precision and efficiency. This device is designed for welding various types of metals, which ensures the quality and repeatability of welds at the highest level. Thanks to the 3-in-1 function enabling welding, cutting and laser cleaning, the device is versatile and effective in many industries. Why choose CORMAK WL3000? The CORMAK WL2000 laser welding machine is the perfect solution for professionals looking for reliability, precision and efficiency. Its innovative design and advanced cooling system make it a future-proof device that can handle even the most demanding welding tasks. Pre-order now and take advantage of this unique offer! Key Features and Benefits Advanced cooling system : A new, more efficient water cooling system ensures optimal operating temperatures, allowing you to work longer without interruption and increasing the lifespan of your device. Innovative design : The ergonomic and lightweight design of the welding head allows for welding even in hard-to-reach places. Thanks to the adjustable spot size (0-5 mm) and replaceable nozzles, the operator has full control over the welding process. Easy to use - thanks to the solutions used and the well-thought-out design, the operator can start working after a short training Low indirect radiation, just wear protective glasses to filter strong light when working Much faster welding than traditional methods, productivity can increase by 3 to 10 times Concentrated beam: slight change in structure due to small heat-affected area, Repeatability of welds, the weld seam is nice, the welds are of high strength. Very thin materials such as 0.5 mm stainless steel can be welded. Welding option with or without wire. The integrated laser cleaning function increases the range of applications of the device. Possibility of using the cutting option - ensures excellent cutting quality, without mechanical processing. Technical parameters Maximum power 3000 W Laser wavelength 1070nm Fiber optic length 10m Working modes Continuous / Modulated Air pressure 10 - 15 L/min Gkedekkbw Uepfx Ag Djf Welding speed 0-215mm/s Automatic wire feeder Ø 0.8 - 2.0 mm Maximum power consumption ≤11.0kW Focal length 150mm Cooling system water Operating voltage 400V Shielding gas consumption 20L/min Dimensions 600x1100x1100mm Weight approx. 207 kg

Year of construction: 2015, condition: like new (used), Control stud welder Make: TUCKER STANLEY Type: DCE 1500 Digitally Cintrolled Energy Gksdol Axrqopfx Ag Dof with 5 sockets . In mint condition .

Year of construction: 2019, condition: like new (used), functionality: fully functional, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA MH6.(Payload: 6kg, H-Reach:1422mm, Robot Mass: 130kg, 2009.03) 1 x YASKAWA DX100 controller.( 2009.03 ) 1 x IPG YLS-1000 Ytterbium 1kW Laser.(2011.05) 1 x IPG P30 laser welding head with coaxial nozzle and cam.(2018.05) 1 x Cooling water circulation system RIEDEL for laser.(2011) 1 x Cooling water circulation system Chilly-35-S for optics.(2010). 1 x siegmund table 1200x800.(2019) 1 x IPG Welding Head Alarm Module Box WHAM.(2018.05) 1 x PC for Laser with LaserNet software. Machine can be inspected. Very good condition. Connected, can be tested. Godpfxoh Ad E He Ag Dekf Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: S2321M0007, laser power: 400 W, This TruLaser Cell 3000 is used to cut parts out of coil, in thin sheet-thicknesses. It has an automatic feed of the material in the lasercel. The machine is visible in production. Godjx Hiy Hopfx Ag Dskf

Condition: ready for operation (used), Year of construction: 2019, Main Drive Max payload 15 kg Media Power consumption 36 kVA This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4" touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine. Gksdpfx Agsx D Hdhe Djf Application Types Welding

Condition: new, Year of construction: 2025, A compact device using the FIBER technology, designed for welding many types of metals with precision far exceeding traditional welding methods. Advanced technological solutions used in the offered welding machine allow to perform high-quality and repeatable welding welds of thin-walled materials and parts without the risk of deformation. Advantages of a laser welding machine Easy to use - thanks to the applied solutions and well-thought-out structure, the operator can start working after a short training Low indirect radiation, when working, it is enough to wear protective glasses to filter strong light, Welding much faster than with traditional methods, productivity can be increased by up to 3 to 10 times Concentrated beam: slight structure change due to the small heat-affected area, The repeatability of the welds, the welding seam is nice, the welds are high strength. Very thin materials such as 0.5mm stainless steel can be welded. Option of welding with or without wire. Technical parameters Maximum power 2000W Laser wavelength 1080nm Depth of penetration (stainless steel 1 m/min) 4.57mm Depth of penetration (black steel 1 m/min) 3.59mm Depth of penetration (aluminum 1 m/min) 4.0mm Depth of penetration (brass 1 m/min) 4.0mm Welding speed 0-120mm/s Automatic Wire Feeder Ø 0.8 - 1.6mm Maximum power consumption ≤6.0kW Cooling system aqua Working voltage 400V Shielding gas consumption 20L/min Dimensions 600 x 1100 x 1100mm Weight approx. 185 kg LATEST GENERATION WELDING HEAD WOBBLE head; Automatic wire feeder included; Adjustable spot size 0-5mm; The powerful welding head allows many types of beam guidance: -, ○, ◎, ⊙, 8, ∞; Integrated connections for shielding gases and cooling system, Interchangeable nozzles allow for welding at different angles, 10 m of optical fiber that connects the head to the source, Adjustment of welding parameters directly in the head without having to go to the control panel; Full ergonomics - thanks to the light and flexible design, the head can perform welds even in hard-to-reach places; Easy to service - quick and easy replacement of the protective lens. Automatic wire feeder included The wire feeding system is synchronized with the welding machine software. The task of the feeder is to feed the filling, thanks to which the operator can focus 100% on the work of the head. Set includes laser welding machine with built-in cooling system Gsdpfeizr Rlsx Ag Dskf welding gun with adjustable focus and a set of accessories Fiber laser source automatic wire feeder set of cables starter kit of nozzles and protective glasses THICKNESS OF WELDED MATERIALS Material WELDER POWER 1000W 1500W 2000W Stainless steel 0.5-3.0mm 0.5-4.0mm 0.5-5.0mm Black steel 0.5-2.5mm 0.5-3.5mm 0.5-4.5mm Galvanized steel 0.5-2.5mm 0.5-3.0mm 0.5-4.0mm Aluminum 0.5-1.2mm 0.5-1.8mm 0.5-4.0mm Brass 0.5-1.2mm 0.5-1.8mm 0.5-2.5mm

Condition: used, Year of construction: 1988, Welding fume extractor Fabr.ESTA Type:SRF - 2000 Year 1988 Gkedpsu Hlppofx Ag Dsf Ready for use.

Year of construction: 2019, condition: like new (used), Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20D.(Payload: 20kg, H-Reach: 1717mm, Robot Mass: 280kg, 2009.01) Gkodpfx Aeh Aiy Ssg Dof 1 x YASKAWA DX100 controller.( 2009.02 ) 1 x LASERLINE LDM 1200-60 Diode 1320W Laser.(2015.10) 1 x LASERLINE laser welding head OTS-5 with Crossjet and cam.(2017.12) 1 x Cooling water circulation 2 way system HYFRA Sigma7 for laser and optics.(2018) 1 x siegmund table 1200x800.(2019) Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: ready for operation (used), Year of construction: 2023, General Data Measurements height 1600 mm Dimensions Machine Length 1800 mm Gkodpfex D Ik Aex Ag Dof Main Drive Spindle Speed 1800 RPM Spindle motor power 45 kW Movement X-Axis Movement 2050 mm Z-Axis Movement 200 mm Y-Axis Movement 3050 mm This H.G. Ridder Waricut HWE 3020 2 2 D Retrofit was manufactured in 2023. It features two cutting heads, each capable of a maximum travel of 2,450 mm. Key specifications include a travel range of 2,050 mm (X) and 3,050 mm (Y), with a Z-axis travel of 200 mm. It boasts a maximum linear speed of 20 m/min and an installed drive power of 45 kW. Contact us for more information about this waterjet cutting machine. Application Types Cutting

Year of construction: 1999, condition: excellent (used), Welding machine make DALEX Type:VARIO MIC 400L year 1999 in very good condition, little used. Gkedpfxefgvvas Ag Dsf

Condition: like new (used), Year of construction: 2018, Set for robotic plasma welding . Gedpfxsrfuc Ho Ag Dskf Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,800 h, Table Table load 7500 kg This VOORTMAN V320 was manufactured in 2019. It features a Kjellberg Smart Focus 300 plasma source and a Donaldson DFPR06 extraction system. Capable of handling mild steel with a panel length range of 850 – 6,100 mm and thickness from 6 – 75 mm. It includes options for punch marking and countersinking, enhancing versatility. Consider the opportunity to buy this VOORTMAN V320 plasma cutting machine. Contact us for more information about this machine. Application Types Cutting Godpfx Aex D N Aaog Dskf

Year of construction: 2017, condition: like new (used), Set for robotic laser welding Scope of supply: 1 x IPG YLS-4000 4KW output laser (2017). Fiber core 300 microns and 30 meter length, LCA LCA. Optical coupler inside. Profinet interface. Power ON work time : 32832 hours 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD with air knife. Machine can be inspected. Very good condition. Connected, can be tested. Gksdpfx Aerfucqog Djf Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: ready for operation (used), Year of construction: 2022, Table Table load 12.5 kg Media Chip conveyor Yes Additional Equipment operateONE: Quick start buttons (Start / Stop / Reset / Emergency stop, Speed potentiometer, Selector switch for 2 stations operation) slideONE: 4000 mm linear axis for Universal Robot with an effective stroke of the robot at 1600 mm Gjdpfx Agsx D E Huj Dekf RotateTWO 250: External rotating/tilting axis for the robot with a 250 kg load capacity, including standard product with octagonal plate (16 mm perforation) and SW 600x50 table Safety technology: 1 set of laser light barriers with steel column and 1000 mm light barriers This 6-axis FRONIUS UR10 Roboter e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional specs include a 4000mm linear axis, a rotating/tilting axis with a 250kg capacity, and a torch holder. Ideal for advanced welding applications. Contact us for more information about this machine. Application Types Welding

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Set for robotic laser welding Scope of supply: 1 x Laserline LDM1200-60 (1320W).(2011). 1 x 2 Way Hyfra CHILLER.(2018). 1 x HIGHYAG LASER WELDING HEAD. Machine can be inspected. Gkodpfxerfucfs Ag Def Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: ready for operation (used), Year of construction: 2008, This GASPARINI Spark 20040 was manufactured in 2008. A robust plasma cutting machine, it features a substantial working area of 4000×2000 mm and can handle sheet metal up to 60 mm thick. With cutting speeds ranging from 0.1 to 30 m/min and a maximum positioning speed of 40 m/min, it's designed for efficiency. Consider the opportunity to buy this GASPARINI Spark 20040 plasma cutting machine. Contact us for more information about this machine. Application Types Cutting Godpfx Aex D Sq Hog Djkf

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 700 mm Measurements depth 1054 mm Measurements height 978 mm Machine weight 197 kg Gkjdpfx Agox D Ixas Def This Thermal Dynamics UltraCut 200 was manufactured in 2012. It features a robust output current range of 10-200 A and a duty cycle of 100% at 200 A, ensuring continuous operation. The cutting capacity on mild steel reaches up to 40 mm with a maximum edge start of 65 mm. It includes a liquid-cooled XT-300 precision torch and a DFC-3000 digital gas console with touchscreen. For more information about this machine, please reach out to us. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2014, This SAF PRO ALPHATOME 20 40 plasma cutting machine was manufactured in 2014. It features a robust 4000 x 2000 mm table and includes a NERTAJET HP150 plasma source along with PRONEST HYPETHERM NESTING SOFTWARE. Designed for cutting up to 20 mm steel, it ensures precision with CNC control and linear guides on all axes. Consider the opportunity to buy this SAF PRO ALPHATOME 20 40 plasma cutting machine. Contact us for more information. Application Types Cutting Gedpfx Asx D D Nhsg Dekf