Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 10,000 kg, Column lift rotating device, 10 tons or 15 tons load capacity, available as a set or individually. Driven on 2 sides. The machine is offered as a set, synchronized, or individually. Protec turning device / positioner, Syncrolift. Double column, hand-held remote control, wireless and manual. Column adjustment, electrically driven (2 units), available at an additional cost. Load capacity: 10,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1700 mm. Speed: 0.5 RPM. Clamping plate diameter: 900 mm. Rotating movement: 2 x 2.2 kW. Torque: 18950 Nm. Dcjdpfxjx Tig He Adyjk The machine is also offered individually as a mono model (more affordable). Available with a universal joint flange (cardan flange) upon request.

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Demmeler Robotix L Manipulator 3-Axis 360° rotation, 360° tilting (overhead), with height adjustment (virtually silent) Excellent condition (like new) Minimum height: approx. 486 mm (tilting axis 0° horizontal) Maximum height: approx. 1438 mm (tilting axis 0° horizontal) Minimum height: approx. 525 mm (tilting axis vertical) Maximum height: approx. 1477 mm (tilting axis vertical) Lower arm length 1500 mm (radius) Upper arm length 1900 mm (radius) Connection: 16 A plug Djdsyupl Dopfx Adyock Overall height 3250 mm Rotational speed approx. 0.2 - 2.0 rpm Torque 24000 Nm Lifting speed 1.5 m/min Handheld remote control

Condition: new, Year of construction: 2026, load capacity: 10,000 kg, Column lifting and rotating device, 10 tons lifting capacity, available as a set or individually. Driven on 2 sides. The machine is offered as a set for synchronous operation or individually. Protec rotating device / positioner Syncrolift. Double column, hand-held remote control, wireless and manual. Column adjustment, 2x electrically adjustable (at extra cost). Lifting capacity 10,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1700 mm. Speed: 0.5 RPM. Diameter of clamping plate: 900 mm. Rotating movement: 2 x 2.2 kW. Torque: 18950 Nm. Dcedpewtq Dtefx Adysk The machine is also offered individually as a mono model (more affordable). Optional with a universal joint flange (cardan flange).

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 10,000 kg, pivoting range: 360 °, Column lift swivel device, 10-ton lifting capacity, available as a set or individually. Driven on 2 sides. The machine is offered as a synchronized set or individually. Protec swivel device / positioner Syncrolift. Double column, hand-held remote control, wireless and manual. Column adjustment 2 times (electrically adjustable for an additional charge). Lifting capacity: 10,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1700 mm. Speed: 0.5 RPM. Dsdpfx Ajxq S Rgedyock Clamping plate diameter: 900 mm. Swivel movement: 2 x 2.2 kW. Torque: 18950 Nm. The machine is also offered individually as a mono model (more economical). Optional, with a universal joint flange (cardan flange).

Condition: new, Year of construction: 2025, load capacity: 2,000 kg, 3-axis rotary and tilt positioner, 2000 kg load capacity, clamping plate diameter 0.8 meters. Proven in the fields of construction and agricultural machinery, commercial vehicles, industrial trucks, as well as in aerospace and energy technology. Suitable for welding, assembly, machining, etc. Dedpfx Asxbhp Hodyock Featuring a stable and robust design, flexible positioning across three axes (including overhead), and easy operation, these positioners simplify welding, assembly, and handling of large workpieces. Advantages: - Faster production, increased productivity - Optimal workpiece positioning improves weld quality and allows for higher deposition rates - Enhanced safety; dangerous crane handling is significantly reduced - Positioning on up to three axes simultaneously without cumbersome re-clamping - Simple operation and ergonomic design protect and relieve the operator - Flexibility through modular adaptability and custom special versions available Operating principle: The rotary arm axis is positioned above the clamping plate, so the rotary arm acts as a counterweight to the workpiece. As a result, these machines are much more powerful than standard rotary-tilt tables or rotary-tilt positioners. This principle enables the handling of the specified loads in any position. Endless rotation of the two rotary axes and additional height adjustment allow for all workpiece orientations (including overhead). Turntable speed is infinitely variable from 0.05 to 0.6 rpm. 2000 kg load capacity. - Wireless hand remote control - Continuous 360° rotation - Continuous 360° tilting - Stroke: 1000 - 1500 mm - Arm reach radius: 1.2 meters

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 1,500 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 2,800 kg, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Laser cutting machine with 1500 W fiber laser, ecoline series Our goal is to offer high-precision, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of delivery, as well as first-class service. Please also note our attractive leasing/hire-purchase offers. The exceptionally affordable entry into laser cutting technology - high-quality MaxPhotonics laser source - extremely energy-efficient cutting system - requires only approx. 3.0 x 3.0 meters of floor space - Top quality, schedule a viewing now! Cutting of steel sheet up to 15mm Cutting of stainless steel sheet up to 6mm Cutting of aluminum sheet up to 5mm - Travel range approx. 1300 x 1300mm - Size of the support table: approx. 1300 x 2500mm (i.e. a whole medium-format sheet fits into the machine) - Machine control in German - manual front door - Comprehensive collision protection measures - large front window for observing the cutting process - automatic, programmable 2-gas switching (compressed air/nitrogen, oxygen) - Extensive cutting parameter file - incl. housing module - CypCut1000 cutting software - Raytools 240 cutting head - very easy to operate. - powerful laser cooler Sales are exclusively to commercial businesses. Dcodpfxoitu Srj Adyjk Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 3.2m Height: 2.3m Length: 3.3m Total weight: approx. 2800kg Do you need a different laser power, table shape, or table size? No problem. I will gladly create a suitable offer. Are you unsure which laser power is suitable for your application? Of course, I will carry out cutting tests according to your requirements. A lot is possible here. From 0.5 kW to 20kW laser power.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, laser power: 150 W, input voltage: 230 V, type of cooling: water, warranty duration: 12 months, shaft length: 10,700 mm, Equipment: CE marking, cabin, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Laser cutting machine from our showroom with 150 watts of laser power Delivery time: immediately available ----- Switch on and get started ----- ----- Machine with only approx. 10 operating hours ----- ----- Year of manufacture: 2025 ----- Professional machine ----- - incl. Windows 11 PC system / monitor / keyboard / mouse - includes installed cutting and engraving software in German - coordinated and ready for immediate use - The machine is capable of very fine engraving as well as precise cutting of thick wood or acrylic glass. - Machine was only used for demonstration purposes - Very versatile cutting machine. - Cuts wood up to 20mm thick - Cuts acrylic glass and many other plastics - Cuts fabrics, non-woven materials, etc. - Cuts rubber mats - Engraves on wood, concrete, stone, many plastics - Production of stamps - Heavy-duty industrial quality - Travel range 1300 x 900mm - Drives with hybrid servos - Linear guides on all axes - RECI laser tube with 150 watts peak power - incl. honeycomb table insert (removable / extendable) - incl. knife table (removable / extendable) - Sheets up to approx. 20mm thick can be pushed through the machine. - Continuous processing possible - incl. generously sized laser cooler Dedsfkgq Aopfx Adyock - incl. generously sized extraction system - Very easy to operate. - Machine control in German - Machine controller in German, with large color display - Very reliable data transmission with USB and network cable - No hassle with the trade supervisory authority - We have all spare parts and wear parts in stock Please also note our favorable leasing/hire purchase offers. Sales are exclusively to commercial businesses. Delivery / advice / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 200cm Height: 125cm Depth: 150cm Shipping weight: approx. 600kg

Condition: used, Year of construction: 2012, functionality: fully functional, type of input current: three-phase, overall weight: 800 kg, input voltage: 400 V, filter area: 84 m², suction capacity: 4,000 m³/h, Welding fume extraction unit, dust collector, self-cleaning filter, pneumatic, vacuum-type, manufactured by Donaldson Torit. Suitable for welding, grinding, sandblasting, and all types of dry dust. Cartridge-type filter elements. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. Brand: Donaldson Torit Model: 2DFP4-SPRK Year of manufacture: 2012 Dcedpfezm Ux Ssx Adyjk Fan power: 5.5 kW Capacity: 4000 m3/h Filtration area: 84 m2 Filter elements: Donaldson Ultra WEB Inlet diameter: 200 mm Equipped with a "SparkTrap" spark arrestor system Dimensions: Width: 1.40m x 1.44m Height: 3.00m Stock number: 1150

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Fiber laser welding machine with 2000-watt laser power 4-in-1 device Welding with automatic wire feed Welding without wire Cleaning Cutting - Top device at a top price from our showroom - approx. 10 operating hours - 2kW laser source by MaxPhotonik - German-language menu navigation - Universal device for welding / cutting / cleaning - incl. 4-roller welding wire feeder - integrated water cooling - immediately available Also take advantage of our attractive leasing/financing offers. Dcsdpfxsug Unfj Adysk Approx. machine dimensions: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 150kg

Condition: like new (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, ground cable length: 4,000 mm, type of cooling: air, hose package length: 3,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, Unused Lascentrum MIG/TIG 200 ACDC Synergic MIG & TIG ACDC for steel, stainless steel and aluminium. Ideally suited for use at home, on site, for general welding work, light steel/stainless steel/aluminium construction, and in the workshop. 5-200 AMP 230 Volt Synergic ACDC TIG Pulse 2/4 Step Gas pre flow / Gas post flow Start current / End current Up slope / Down slope Pulse Time / Pulse Frequency AC Balance / AC Frequency adjustable AC Wave adjustable Spot welding Fixed programs / Program memory Elektrode option Including: SB150 Welding torch 3 Meter SR17 Tig Welding torch Earth cable 3 Meter 35mm² Elektrode cable Gas hose Manual (If in the original packaging) Original Packaging 3 Months Warranty of Cjays The machine is unused and comes from a stock lot. No manufacturer’s warranty from Lascentrum applies. Test Welding is possible in our Workshop in Valkenswaard Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Dedozqc U Aopfx Adyjck Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: like new (used), functionality: fully functional, total height: 450 mm, total width: 240 mm, total length: 670 mm, input voltage: 400 V, ground cable length: 4,000 mm, type of cooling: air, hose package length: 4,000 mm, welding current at 60% duty cycle: 250 A, welding current at 100% duty cycle: 200 A, welding current (min.): 15 A, welding current (max.): 300 A, Unused Lascentrum MIG 300 DP-3 Synergic Double Pulse MIG/MAG for steel, stainless steel and aluminium. Ideally suited for on-site work, general welding, medium-duty steel/stainless steel/aluminium structural work, and in the workshop. 15-300 AMP 400 Volt Synergic Puls / Double Pulse 2/4 Step / 4 Roller Drive Fixed Programs / Program Memory Stick Option Including: SB250 3 Meter Welding Torch Earth Cable 3 Meter 35mm² Electrode Cable Dodpozqc Aaofx Adyjck Gas hose Manual (If available in the Packaging) Original packaging 3 Months Warranty The machine is unused and comes from a stock lot. No manufacturer’s warranty from Lascentrum applies. Test welding is available at our workshop in Valkenswaard. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Year of construction: 1999, cutting width 3000 mm Dodszmy Tbjpfx Adyjck Numbers of torche 1 Cutting system Plasma PA-S 150 total power requirement 4,5 kVA weight of the machine ca. ca. 8-12 t required space 16000 x 5000 mm

Year of construction: 2004, condition: used, functionality: fully functional, machine/vehicle number: S 10054, A professional, high-precision longitudinal seam welding machine designed specifically for the ventilation and ducting industry. The WAMMES SW 1250 provides airtight, high-strength overlapping stitch and continuous seam welds on round ducts and fittings, ensuring compliance with strict industrial leakage standards. Dcjdpszbh Hyofx Adyok Specifications: - Manufacturer: WAMMES Machining (Germany) - Model: SW 1250 - Application: High-efficiency stitch and continuous welding for ventilation ducts, chimneys, and round fittings. - Welding Length (Max): 1250 mm - Material Thickness Range: Galvanized Steel: 0.4 mm – 1.0 mm (approx.) Stainless Steel: 0.4 mm – 0.8 mm (approx.) Key Features & Components: - Airtight Seam Quality: Engineered to deliver tight, consistent welds without damaging the zinc coating on galvanized sheets. - Robust Clamping System: Heavy-duty pneumatic or mechanical clamping bars hold the rolled cylinder perfectly in place for uniform seam alignment. - Adjustable Overlap: Allows for precise calibration of the joint overlap, minimizing material waste. - Industrial Control Panel: Simple, operator-friendly interface for adjusting welding speed, current, and stitch intervals. - Foot Pedal Operation: Facilitates safe, hands-free workpiece positioning and cycle activation. Condition & Availability - Status: Fully operational and in good working condition. - Ready for delivery

Condition: used, Year of construction: 2009, CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 Year of Manufacture: 2009 CNC Control: Global Control Plus Track width: 4,000 mm 2 x Plasma with Hypertherm HPR260 power source Travel length: 10 m 2 x oscillating conveying tables Size: 3 x 3 m each Without filter system Dsdpszmv Dcsfx Adysck 22726ä

Condition: new, Year of construction: 2026, Technical Specifications: Model: KEP40 Operated: Manuel Power: 40KVA Welding Capacity: 1+1 mm mild steel Power Level: %0-100 power adjustable by digital microcontroller Weld Time: 1-99 Cycle (20ms - 2s) adjustable by digital microcontroller Dodpoy Dildefx Adyeck Input Voltage: 380V/50Hz Protection Fuse: 63A Flexible Pistol Arm cable Length: 250cm Flexible Chassis Cable Length: 100cm Power Input Cable: 3m Protection Class: IP21 Dimensions (W/L/H): 530mm x 430mm x 610mm Weight: 116kg

Condition: new, Year of construction: 2026, The KL2000 machine combines welding, cleaning, and cutting into a single compact unit. It offers an energy-efficient, low-maintenance, ensuring high precision and fast operating speeds across various metal types. Technical Specifications: Laser Source: 2kW Laser Type: Fiber Laser (Raycus) Laser Wavelength: 1080 nm Adjustment of power: 10 - 100% Output Power Stability: < 3% Central focus distance: 150mm Dcjdpfszmtmhex Adyjk Adjustable axial run-out (weld seam): 0.1 - 5 mm Laser Cooling System: Integrated water cooling chiller Power Supply: 220V 50Hz Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 - 40°C Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 8 m Machine Dimensions (L x W x H): 1,000 x 550 x 650 mm Weight: 210 kg CE Certification: Included

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, overall weight: 1,250 kg, input voltage: 400 V, total width: 1,515 mm, total length: 2,060 mm, total height: 3,310 mm, volume flow: 15,000 m³/h, noise level: 77 dB, filter area: 160 m², suction capacity: 15,000 m³/h, negative pressure: 2,800 Pa, ESTA FILTOWER F-160 W3 Filter Ventilation Tower Industrial filter ventilation for welding halls – suitable for a variety of technological processes in manufacturing facilities. Application area: dust extraction, dry, granular material Top suction and draft-free bottom discharge – precisely at the work areas. Layered filter ventilation principle; no ductwork installation required. Cartridge filter elements – self-cleaning via compressed air pulses during operation. Filter cleaning based on differential pressure – no compressed air losses. Layered ventilation principle: contaminated air is extracted from above, filtered, and then released at floor level as clean, breathable air, without generating drafts. Precisely where workers breathe. Dodpfxoy D Nhfe Adysck Year of manufacture: 2016 Technical specifications: - Motor: 2 x 4.0 kW - Max. air flow rate: 15,000 m³/h - Max. negative pressure: 2,800 Pa - Sound pressure level: 77 dB(A) - Number of filters: 4 - Filter surface area: 160 m² - Dimensions (L/W/H): 2,060 x 1,515 x 3,310 mm - Weight: approx. 1,250 kg Stock no.: 1127

Condition: used, Year of construction: 2002, functionality: fully functional, type of input current: three-phase, overall weight: 1,700 kg, filter area: 286 m², suction capacity: 10,000 m³/h, Dust extractor, welding fume extractor, self-cleaning pneumatic vacuum filter for continuous operation by renowned brand Donaldson Torit. Suitable for plasma, laser, sandblasting, soda blasting, welding and all types of dry dusts. The fan is installed after the filter on the clean air side, which minimizes explosion risks. Ultra Web filter cartridges are cleaned pneumatically with compressed air pulses during operation, ensuring high efficiency of the unit. Model – DF+12 SPKTRP Fan power: 11 kW Capacity up to 10,000 m3/h Connection diameter: 315 mm 12 filter cartridges Filter area: 286.8 m2 Dcodpfjy D Sclex Adyjk Year of manufacture: 2002 Equipped with "SparkTrap" spark arrestor system Stock number: 1121

Condition: not inspected (used), for sale in the condition shown in the picture. Dsdpfx Ash Ti R Nodyjck

Condition: good (used), Power: 50 kVA Dodpfx Aspy Dypedyjck Arm design: 520 mm

Condition: good (used), Arm design: 270 mm Power: 125 kVA Dsdpepy Dy Esfx Adysck

Condition: used, Frame size: 4100 x 2520 mm Cabin size: 3000 x 2520 x 2500 mm high + chimney: 600 mm Dodpfx Asxct Anodyock

Condition: ready for operation (used), functionality: fully functional, Material thickness: 3 – 35 mm Cutting speed: variable, max. 1.8 m/min Minimum material length at edge: 60 mm Maximum edge width: 12 mm (adjustable) Edge head motor power: 400 W Dcodpjyk U I Ajfx Adyok Edge head: resharpenable Edge angles: 30°, 45°, 22.5°, 37.5°, 50° Dimensions: 470 x 294 x 523 mm Machine weight: 30 kg

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, throat depth: 500 mm, Manufacturer: Fase Dedeuhn Tkopfx Adyock Full: 116 kVA Version: 500mm The machine used to be part of a system, its settings and performance were controlled via a central control unit, which is currently missing, This version is required to operate the machine!

Condition: repair required (used), Full: 63 KVA Arm design: 400 mm The machine is currently not working (control panel missing) Dedpfx Adspy Dx Isysck