Used Diesel Welder for sale (8,136)

Condition: good (used), Year of construction: 1994, operating hours: 7,430 h, functionality: fully functional, overall weight: 38,000 kg, fuel type: hybrid, power: 1,500 kW (2,039.43 HP), output frequency: 50 Hz, type of output current: three-phase, motor manufacturer: Wärtsilä, Diesel Generating Set – 1.5 MWe / 50 Hz Wartsila Vasa 4R32 LN-E This Wartsila diesel generating set has been used exclusively for testing purposes by VTT Technical Research Centre of Finland and has accumulated only 7,430 operating hours since new. Originally, it was built as a conventional diesel engine capable of burning various heavy fuels with viscosities of up to 730 cSt at 50°C. The engine was subsequently upgraded by Wartsila to comply with the LN-E model specification for their 32-series engines and it was equipped with adequate fuel feeding systems, cylinder heads, pistons and liners for dual fuel (DF) and gas diesel (GD) operation. The upgrade included the installation of anti-polishing rings, an increase in engine output, and the implementation of a completely new control system. The unit has been used to test various fuels and components on behalf of Wartsila. It has been exclusively serviced by Wartsila and remains in good technical condition. Over the years, Wartsila has installed new components and control systems. At present, the engine is equipped to operate in three different modes: As a conventional diesel engine using heavy fuel oil (HFO); As a Wartsila 32DF (Dual Fuel) engine using natural gas and light diesel oil; As a Wartsila GD (Gas Diesel) engine, where gas is compressed to high pressure and injected into the cylinder, ignited by a pilot dose of light diesel oil. Naturally, to switch between modes, certain components—such as the turbocharger, cylinder liners, pistons, and cylinder heads—must be changed. Kedpfx Abjyfflzsnjdr All necessary components and much more additional spare parts (some brand new) are coming together in the same package. We can specify more in details upon request. Technical support for on-site installation can also be provided, subject to a separate agreement. The machine is currently located in Kotka and can be shipped by sea to any suitable destination port. Quotations are available upon request.

Condition: excellent (used), Year of construction: 1998, PROD. ATLASCOPCO TYPE XAMS445 S/N YA3-047166-00291071 YEAR 1998 POWER (kW) 206 CAPACITY (m3/min) 26.1 Ksdpfx Absztxxconodr PRESSURE (bar) 8.6 HOURS (SERVICE/TOTAL) VARIABLE FREQUENCY DRIVE no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no NEW/USED USED

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: MN 141360, Offer for Sale – FillMatic MSE 220R We are offering for sale a FillMatic MSE 220R mattress core stacker, a fully functional machine ready for immediate operation after connection. The equipment is intended for gluing mattress cores and ensures their automatic stacking at the end of the production line. Location: Slovakia – Oravské Veselé 02962 Basic Technical Data: • Machine No.: MN 141360 • Machine type: SRA 200 • Power: 4.8 kW • Voltage: 400 V Kdsdpfx Abexgd Hfsnsr • Year of manufacture: 2014 Machine Description: The FillMatic MSE machine serves as a mattress core stacker. • It is designed to prevent damage to still-fresh adhesive seams during handling – an ideal solution for placement directly after the gluing section of the line. • Allows stacking to an adjustable height, with access from three sides depending on the safety guarding configuration. • The FillMatic MSE designation refers to a series of stacking or folding machines that can be combined or customized according to production requirements. This specific model is a combined version – a mattress core gluer with end-of-line stacking, making it suitable for efficient production and labor savings. The equipment is in good technical condition and ready for immediate deployment in your production process. For more details or if you are interested, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2020, functionality: fully functional, working width: 3,700 mm, welding power (max.): 2,200 kVA, wire diameter (max.): 25 mm, type of input current: three-phase, 1. EVG QC76/144-ZL/PV Wire Mesh Welding Line Description EVG High-Performance Mesh Welding Line - Type QC76/144-ZL/PV · Max. Sheet Width: 3,700 mm (Welding width: 3,600 mm) · Sheet Length Range: 1,500 mm – 12,000 mm · Wire Diameter Range: Line wire (6 – 25 mm) / Cross wire (6 – 16 mm) · Max. Working Speed: 90 CW (cross wire) / min. · Line Wire Spacing: 75 mm – 1,000 mm (Steplessly programmable) · Cross Wire Spacing: 50 mm – 2,000 mm (Steplessly programmable) · Number of Line Wires: Max. 33 wires · Input Material: Pre-cut and straightened line and cross wires (Cold-formed/Hot-rolled) · Power Rating: 2,200 kVA (Driving power: 120 kW) Key features Kdsdpfx Absy Aig Sensr · Versatility: Optimized for the economic production of special sheets and engineered fabric, even for the smallest lot sizes. · Precision: Features steplessly programmable spacing for both line and cross wires, allowing for highly customized mesh designs. · Heavy-Duty: Capable of welding large diameter wires (up to 25 mm), suitable for structural and industrial applications. · Automation: Advanced cascade welding system (automatic) for efficient multi-diameter operations. 2. EVG DRE16 Wire Straightening Machine Description EVG DRE16 High-Speed Wire Straightening and Cutting Machine · Wire Diameter Range: 8 mm – 16 mm · Max. Feed Speed: 160 m/min. · Max. Wire Strength ($Rp0.2): 600 N/mm2 · Driving Power: 85 kW · Power Supply: 380 V, 60 Hz, 3ph · Color: RAL 7001 (Grey) / RAL 3011 (Red) · Standard Compliance: EN 60204-1, IEC 60364-4-41 TN-C Key features · High Productivity: Offers a superior straightening speed of up to 160 m/min, ensuring high throughput for downstream welding lines. · Material Compatibility: Specifically designed to handle high-strength wire up to 600 N/mm2. · Reliability: Built with EVG’s renowned precision engineering for consistent straightening quality and long-term durability. * Machine can be seen in factory.

Condition: like new (used), Year of construction: 2010, operating hours: 487 h, functionality: fully functional, overall weight: 1,100 kg, volume flow: 358 m³/h, power: 125 kW (169.95 HP), type of cooling: water, rotational speed (max.): 1,500 rpm, Diesel water pump set, Sprinkler unit with few operating hours, in excellent condition for sale. 358m3/h Manufacturer: SISU Type: 420DSJPL Year of manufacture: 1996/ 2010 new turbo freshly serviced Power: 120 kW, 2940 rpm Pump: KSB ETANORM MX125-250 year: 2010 Capacity: 358 m3/h delivery height: 86 meters Power: approx. 180 HP Weight: 1200 kg self-starting water cooling built on a mobile chassis Operating hours: approx. 473 hours If you need more information, we will help you! Please contact us using the form or call us by phone. Kodpfoyi H Eqsx Abnjdr Your ad has been automatically translated. Translation errors may occur.

Condition: used, Year of construction: 1970, operating hours: 7,253 h, power: 31 kW (42.15 HP), next inspection (TÜV): 05/2028, Renault R 56 tractor with Fritzmeier canopy and windshield. MWM engine – Mannheim Diesel. Rear hydraulic lift and plow attachment, 6-speed gearbox, toolbox, small front weight, trailer hitch, PTO, sprung seat, differential lock, etc. Kdjdsy Uqc Espfx Abner =====German registration + vehicle registration document + good tires + original paint=====Detailed view of the vehicle // Detailed walkaround of the car: ?v=DCCwBYSrcYQ ==Daily purchase of commercial vehicles, as well as trade-ins possible==

Condition: excellent (used), Professional plate compactor from the renowned brand AMMANN. Model AVP 2920 is equipped with a reliable HATZ Diesel engine with 5 kW of power. This machine is intended for professional paving, roadworks, and compaction of soil, paving stones, bedding, and asphalt. The unit is fully mechanical with a robust German construction. Visual condition as per the photos – normal signs of use. Technical data: • Manufacturer: AMMANN • Model: AVP 2920 • Year of manufacture: 1999 • Engine: HATZ Diesel • Engine type: 1B30-6 Kdjdpfx Abey Sifyensr • Power: 5 kW • Operating weight: 190 kg • Manual start • Made in Germany Applications: • Compaction of paving stones • Paving works • Road construction • Soil and bedding compaction • Excavations and foundations Condition: Used machine, complete. HATZ engine – a durable and highly regarded diesel unit

Condition: used, Year of construction: 2024, load capacity: 45,000 kg, lifting height: 15,100 mm, - Reachstacker für die Handhabung von Containern - Kapazität: -> 8'6" Container: 45.000 kg Tragkraft - Stapelung 1/2/3/4/5-high -> 9'6" Container: 45.000 kg Tragkraft - Stapelung 1/2/3/4/5-high -> 8'6" Container: 32.000 kg Tragkraft - Stapelung 1/2/3/4/5-high -> 9'6" Container: 32.000 kg Tragkraft - Stapelung 1/2/3/4-high -> 8'6" Container: 16.000 kg Tragkraft - Stapelung 1/2/3/4-high -> 9'6" Container: 16.000 kg Tragkraft - Stapelung 1/2/3-high - Mast: langlebiger und geschweißter 2-stufiger Duplexausleger mit Kasten- und Teleskopausführung - Zwei Hubzylinder im Fahrgestell/Ausleger und ein Ausschubzylinder im Ausleger, Ausfahrhub von 7.000 mm für die Handhabung von bis zu 3 Reihen tief, normale Auslegerspitze - Toplift-Spreader für den Containerumschlag, maximale Tragkraft 45 Tonnen, teleskopierbar 20ft-40ft, 2 hydraulische Rotationsmotoren und 2 hydraulische Rotationsbremsen, für dauerhaftes und sicheres Handling - Seitenverschiebung ± 800 mm (insgesamt 1.600 mm) - Mechanische Pfahlneigung ± 5 Grad (Seitenneigung / Nivellierung durch Schwerkraft) - Motorische Drehung Grad - Endträger mit 4 starken Hebehaken für Schlingen (4 x 12,50 Tonnen Tragkraft), aber max. 45 Tonnen - Sicherheitsverriegelung mit 4 Ausrichtungsstiften und 4 Sensoren, montiert in Twistlock-Endträgern - An der Auslegernase montierte LED-Anzeigetafel für den Containerumschlag - In der Kabine montiertes LED-Head-Up-Anzeigedisplay für die Containerhandhabung - Motor: Dieselmotor Volvo TAD1181VE6 - 6-Zylinder-Reihenmotor, Turbolader und Ladeluftkühlung, Volumen 10,84 Liter - Leistung, Nenn-/Maximalleistung: 265/265 kW bei 2100 U/min - Drehmoment, max.: 1785 Nm bei 1400 U/min - Ölwechsel nach 1.000 h und Filterwechsel nach 1.000 h (ohne Ölprobenentnahme) Kodpfxjzlk Rhs Abnodr - Getriebe Dana TE30510 - Automatische Lastschaltung und hydrodynamischer Drehmomentwandler - Sperrschutz für Fahrtrichtung – vorwärts/rückwärts. - Steuerung und Überwachung: Elektronischer CanBus. - Gänge: vorwärts 5 – rückwärts 3. - Kabine: Alle Schalter in der Kabine sind mit LED-Leuchten ausgestattet - Head-Up-Display in LED zur Drehverriegelungsanzeige. - 2 x 24-V-Steckdosen in den Türsäulen - Sitz Gammer Actimo XL, mechanische Feder, 3-Punkt-Sicherheitsgurt und hohe Rückenlehne, Kopfstütze - Elektrisch verstellbare Armlehne rechts. - Getönte/laminierte Fenster inkl. Schiebefenster in linker und rechter Tür - Scheibenwischer vorne (doppelt), hinten und Dachfenster - elektronisch gesteuerte Heizung/Lüftung inkl. Klimaanlage und Frischlufteinlassfilter, ausgeschaltet bei offener Tür - Komplette Türen mit Griff, Schlüsselschloss und Luftklappe (links und rechts) - Komplettes Manövriersystem rechte Konsole inkl. Standarddisplay (elektrisch verstellbar), Multifunktionshebel linke Seite. - Verstellbare Steuerung, Lenkradkonsole und Schalterfelder - Ergonomischer Joystick für Ausleger- und Anbaugerätefunktionen - Geschwindigkeitsregelpedal rechte Seite, Bremspedale linke und rechte Seite - Lenkrad mit Lenkradknauf. Sicherheitsübersteuerung für Hydraulikfunktionen (per Code) - Radio, MP3, USB, AUX, Bluetooth, Freisprechfunktion, RDS - 24/12-V-Konverter einschließlich vier 20-Ampere-Steckdosen an den vorderen Kabinenpfosten. 1 x 12-V-Steckdose, 2 x 5-V-USB-Steckdosen und 2 x 24-V-Steckdosen - Kalmar-Lenkachse mit doppelten Drehlagern, mechanischen Seitenanschlägen (±3 Grad) und elektrischer Servolenkung mit doppeltwirkendem Zylinder ermöglicht einen kleinen Wenderadius. - Hochleistungsantriebsstrang...

Condition: good (used), operating hours: 129 h, functionality: fully functional, fuel type: diesel, output current: 304 A, output voltage: 380 V, output frequency: 50 Hz, Emergency power system M94, Kdedsu Rb Trepfx Abnor Engine GEC Diesels Ltd, Doman Diesels, Stafford, England, Engine Type 6LET2 Generator Newton Derby LTD. Derby England, Documentation and spare parts available.

Condition: excellent (used), Year of construction: 2009, operating hours: 2,200 h, functionality: fully functional, total width: 2,550 mm, total length: 8,650 mm, pressure: 150 bar, operating pressure: 150 bar, type of input current: DC, fuel: diesel, overall weight: 27,000 kg, empty load weight: 14,555 kg, temperature: 60 °C, fuel tank capacity: 700 l, type of cooling: water, Equipment: crane, rotational speed infinitely variable, type plate available, An authorized SUBARU dealer has a special vehicle for sale that was used for cleaning tunnels and high facades in Sweden. It was also used for high-pressure cleaning of highways and roads. It is equipped with a water cannon that can be controlled from the cab. Additionally, a power generator is installed on the vehicle body. It has a tow hitch that could, for example, be used to pull a sweeper or brushes for road cleaning, or similar equipment for maintaining road cleanliness. The Mercedes was purchased from a municipal company and was regularly serviced. We can manufacture dedicated cleaning nozzles for, for example, cleaning roads or walls. The body was manufactured by "MEC TEC AS" and features highly efficient pumps for water cleaning, up to 300 liters per minute! It also includes a power generator to power the body. It has a 11,500-liter water tank and a 500-liter tank for chemicals. The engine compartment is located at the rear of the body and contains: - Diesel engine - Large, high-pressure water pump connected to the diesel engine via a clutch - Hydraulic pump connected to the diesel engine at the front, which drives: - Small high-pressure pump for water used for cleaning vehicles and technical installations - In addition, there is a lance for remote cleaning Kdjdpszvnipsfx Abnjr - Chemical pump located in a separate cabinet at the rear on the right side - 3 diaphragm pumps located on the right side of the vehicle. - 2 hydraulic pumps connected to the distributor near the diesel engine, which drive: - Hydraulic radiator fan - Arm located on top of the vehicle - Water heating for the small high-pressure pump A tower is built above the cab and attached to an auxiliary frame. This tower forms the basis for the cleaning arm; we offer the possibility of manufacturing a dedicated nozzle for cleaning larger surfaces. The diesel tank for the body has a capacity of 700 liters. - Generator for generating power for external devices - Hydraulic oil tank - Hydraulic oil cooler Mass and dimensions: GVWR: 27,000 kg Unladen weight: 14,555 kg Payload: 12,445 kg GVWR of the combination: 71,000 kg On the drawbar (o.1): 44,000 kg External dimensions: Length: 865 cm Width: 255 cm Wheelbase: 3900/1350 mm Emission standard: EURO 6 Equipment: Body with water tank Cannon/Arm for "shooting" water Arm adjustment in the cab "ALLISON" automatic transmission Power generator Seating: 4 seats Reversing camera On-board computer Air conditioning Tachograph 3rd steerable and liftable axle Rear axle lock Air suspension front and rear Tow hitch/coupling Additional exterior lighting Orange lights Factory radio ABS Immobilizer Electric side window Electric mirrors Heated side mirrors Inspection report: The vehicle is technically and mechanically sound and arrived at our company from Sweden without any problems. It has been regularly serviced. The water cleaning system and pumps have been checked and are functioning properly. It is currently fitted with winter tires, size: 315/80R22.5, with approximately 70% tread remaining. The vehicle is, of course, accident-free and has a genuine mileage, verified by the authorized service center and the Swedish authorities. The stated price is net and applies to export and to companies. A significant discount may be possible for private customers. We invite you to contact us directly by phone to obtain your best price.

Condition: like new (used), Year of construction: 2002, operating hours: 227 h, functionality: fully functional, overall weight: 6,500 kg, fuel type: diesel, power: 178 kW (242.01 HP), output current: 318 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, total height: 3,100 mm, motor manufacturer: Caterpilar, For sale: Olympian GEH200 diesel generator, used as a backup power source, low operating hours, regularly serviced, fluids and filters replaced, service history available. Kjdpozd Rgaefx Abnsdr

Condition: good (used), Year of construction: 1989, operating hours: 3,050 h, Hyster H2.50XL triplex 425 freelift ISUZU DIESEL forklift Video can be sent via WhatsApp. Kodszuwg Iopfx Abnedr Rolling stock available, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a variable stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without guarantees. (see our general terms and conditions) You can arrange a viewing and/or test drive by appointment without obligation. Please call in advance as we are not constantly on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: T33105.1687, Year of construction: 2006, operating hours: 22,275 h, load capacity: 12,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 4,015 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 12,000 kg Load center: 1,200 mm Lifting height: 5,000 mm Load capacity at load center 1,200 mm: 12,000 kg Load capacity at load center 1,500 mm: 10,500 kg Load capacity at load center 1,800 mm: 9,000 kg Front overhang C: 205 mm MACHINE DETAILS Mast type: Simplex Ksdpfx Aozu Nkfebnjdr Drive type: Diesel Overall height: 4,015 mm Weight: 21,000 kg EQUIPMENT Side shifter Fork positioner 3rd hydraulic valve 4th hydraulic valve Heater Full cab Air conditioning

Year of construction: 2011, condition: used, THERMATOOL CFI 250 Solid State HF Welder 250 kW High frequency tube welding machine This THERMATOOL CFI 250 is a Solid State High Frequency Welder designed for the production of steel tubes and profiles using high-frequency welding technology. With an output power of 250 kW and a 400 kHz welding frequency, it delivers reliable, efficient, and high-quality welding performance for tube mill production lines. Technical Specifications · Manufacturer: THERMATOOL · Model: CFI 250 · Year: 2011 · Output Power: 250 kW · Welding frequency: 400 kHz · Input Voltage: 3 × 400 V · Input Current: 578 A Main Features · 250 kW MosFet HF inverter with 5 pairs of modules (5 positive & 5 negative) · AUTOMATCH automatic load matching system · 250Kw DC rectifier with PLC control Siemens S7 · Remote control console · Closed-loop distilled water cooling system Kodpfx Abszpx Iisnsdr Looking for a used THERMATOOL HF welder, 250 kW solid-state welder, or other second-hand tube mill equipment? Explore our extensive range of quality used machinery for the steel tube industry. Input Voltage: 3 × 400 V Input Current: 578 A Welding frequency: 400 kHz Output Power: 250 kW 250Kw MosFet HF Inverter with 5 pairs of modules: 5 positive & 5 negative 250Kw DC rectifier: with PLC control Siemens S7

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 14,530 h, load capacity: 3,000 kg, lifting height: 7,000 mm, fuel type: diesel, mast type: triplex, construction height: 3,400 mm, power: 41 kW (55.74 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Kodpezvtzqjfx Abnsdr Technical condition: good Front tire type: Solid rubber Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire condition: 80 - 100% Description: Toyota diesel forklift 02-8FDF30 - Year of manufacture: 2007 - - Side shift - - Triplex free-lift mast - - Overall height: 3.40m - - Lifting height: 7 m - - 14,530 operating hours according to the display - - NEW rear tires, solid rubber - - Like-new front tires, solid rubber Side shift, 3rd valve, front work lights, heater, full cab,

Condition: used, functionality: not functional, Year of construction: 2007, operating hours: 16,000 h, load capacity: 4,000 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: simplex, construction height: 2,784 mm, drive type: Diesel, Diesel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Not operational Technical condition: Used as a source of spare parts Description: Half cabin 3rd valve, heater Kdodjzvtxiopfx Abnjr

Condition: good (used), Year of construction: 2004, operating hours: 500 h, functionality: fully functional, type of input current: AC, input voltage: 400 V, type of cooling: water, fuel: diesel, overall weight: 2,440 kg, continuous power (apparent): 178 kVA, continuous power: 160 kW (217.54 HP), rotational speed (max.): 1,500 rpm, Brand: SISU Model: G160S Year of manufacture: 2004 Serial number: 144871 Operating hours (read): Low hours Capacity (kVA): 178 Capacity (kW): 160 Engine brand: SISU diesel Kjdpfx Aoxzplijbnodr Engine model: 634DSRAG Fuel: Diesel Alternator brand: Stamford Alternator model: UC 274H Voltage: 231-400 V Frequency (Hz): 50 RPM: 1500 Amperes (A): 257 Dimensions LxWxH (mm): 2550 x 1400 x 1870 Weight (kg) approx.: 2440 Quantity in stock: 1 Manufactured in: Finland / Netherlands Comments: >x emergency generator set, without electric panel

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, input voltage: 400 V, nominal power (apparent): 45 kVA, electrical fuse: 15 A, working range: 50 mm, open-circuit voltage: 28 V, nominal power at 50% duty cycle: 45 kVA, We offer this refurbished IDEAL BAS 050-11 butt welding machine, year of construction 1998. type: BAS 050-11 serial number: 224085 year of manufacture: 1998 year nominal power at 50% ED: 45 kVA rated apparent power: 45 kVA no-load voltage: 28/44 V max upsetting force: 250 kN primary voltage: 400 V rated frequency: 50-60 Hz fuse rating: 15 A Bi-metal / carbide bandsaws: 6×0.6 – 34×1.1 mm Wood saw blades: 6×0.4 – 50×1.0 mm Kdedpjzudivefx Abnsr Stainless steel saw blades: 6×0.4 – 25×0.5 mm Strip blades: 6×0.4 – 30×0.6 mm If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2014, operating hours: 11,065 h, functionality: fully functional, machine/vehicle number: 03001212-03.14, The ALPHA LASER ALM 200 laser welding machine was manufactured in Germany by Alpha Laser GmbH in 2014, but it has been in operation since 2017. This mobile laser welding machine is equipped with a 200 W laser source (9kW laser beam power), enabling the repair and modification of various components such as dies, molds, injection molds, tools, and machine parts in any selected location. Welding is performed in a semi-automatic mode. The mobile laser welding system features a narrow laser head, allowing access to the interior of the welded component. It is controlled via a computer, joystick, and foot switch. The machine is in very good technical and visual condition and has been regularly serviced. The machine comes with a table. Price: 170,000 PLN net (VAT invoice provided). Technical parameters of the ALPHA LASER ALM 200 laser welding machine: – Power: 200 W – Wavelength: 1064 nm – Travel speed (X, Y, Z): 0-25 mm/s – Travel range (X, Y, Z): 140 x 120 x 1300 mm – Pulse energy: 90 J – Pulse duration: 0.5-20 ms – Pulse frequency: 100 Hz – Laser beam power: 9 kW – Laser beam diameter: 0.2-2.0 mm – Operating mode: Pulsed – Focal length: 150 mm – Power consumption: 380 V/ 50-60 Hz / 16 A/8kW – External dimensions: W-1410 x D-730 x H-1585 mm – Machine weight: approx. 320 kg – Operating hours: 11065 – Serial number: 03001212-03.14 Additional parameters and equipment of the ALPHA LASER ALM 200 laser: Ksdpfx Astqtrfobnedr – Optics: LEICA microscope mount, 10x magnification, optionally 16x – Display with keyboard – Multifunctional foot switch – Joystick – Adjustable laser arm – Complete workstation with table – Option to purchase spare parts for the machine and accessories at a good price, e.g., lamps, hoses, wire guide holders, spheres/bases for parts, magnets, etc. – Option to purchase various types of welding wires at good prices – Option to purchase a fume extraction system

Year of construction: 2021, condition: used, GH INDUCTION | EMMEDI HF welder 100kW In excellent working conditions. Year 2021. Solid-state high-frequency induction heating generator 100Kw for tube welding applications · Welding frequency: 400 KHz · Power: 120 KVA · Modules: SiC SiliconCarbide IGBT Scope of supply · Power cabinet with digital control (MPC-3 HMI touchscreen interface) · Oscillator module · XYZ motorized inductor positioning system · Operator control desk with diagnostic display, manual/automatic modes Kdedpfx Aezkf Thebnor · Cooling system with air–water heat exchanger Welding frequency: 400 KHz Power: 120 KVA Modules: SiC SiliconCarbide IGBT

Condition: used, Year of construction: 2007, operating hours: 1,632 h, Equipment: all wheel drive, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to prior sale, errors, and omissions: Skyjack TM scissor lift Type SJ6832RT Diesel 4x4 Manufactured 09/2007 Maximum working height 11.70 m Maximum platform height 9.70 m 1,632 total operating hours, with 1,514 operating hours on the new Kubota engine New Kubota engine installed in 2021 for €7,000.00 (net), with 118 hours of operation since, and kept as a backup unit. Platform dimensions 1.42 m x 2.49 m Platform extension 1.50 m Maximum permissible gross weight 3,475 kg Payload 454 kg 2 persons Overall length 2.72 m x overall width 1.73 m x overall height (min, terrain foldable) 2.51 m Diesel engine, 4x4 Gradeability 40% Travel speed 0.6 - 6.1 km/h Lifting time with rated load 39 sec Driving at full height with extended platform Diesel engine mounted on extendable support Platform extension 1.50 m Spring-loaded, self-closing full door Foam-filled tires Tilt sensor with alarm and automatic emergency shutdown Hour meter Overload sensors Price: €9,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000.00 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to prior sale, errors, and omissions. Kdedpfxezviuyj Abnor

Year of construction: 2014, operating hours: 6,750 h, condition: good (used), fuel type: diesel, Nimos ECO-TRAC Weedcontrol / Weed Burner / Tool Carrier Yanmar Diesel 4WD 2014 Video can be provided via WhatsApp. Ongoing stock available, see website. Prices are ex Nuland. Van de Wert Trading B.V. offers a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our general terms and conditions) You are welcome to make a non-binding appointment for a viewing and/or test drive. Ksdpfxjzd Eybs Abnodr Please call ahead as we are not always present on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, mileage: 22,000 km, power: 162 kW (220.26 HP), first registration: 07/1998, overall weight: 13,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 08/2026, gearing type: mechanical, emission class: euro2, loading space width: 2,470 mm, loading space length: 3,800 mm, loading space height: 1,730 mm, Year of construction: 1998, total length: 7,300 mm, total width: 2,500 mm, total height: 3,150 mm, Equipment: ABS, all wheel drive, parking heater, 1st owner, directly from the garage of a volunteer German fire department. Very well-maintained vehicle, with no issues whatsoever. Ksdpjzvtpzjfx Abnodr Maintained with service records throughout its life at the local MAN authorized workshop. Service record (MAN service booklet) with 25 entries. Last service on August 13, 2025, at 21,702 km. In operation with original registration documents until the end of July 2026 and now de-registered. Drove trouble-free for over 600 kilometers on the highway to us in August 2026. Tanker fire engine TLF 16/25 with METZ superstructure from 1998. With integrated ambient lighting. 2,350 liters of extinguishing water. GRP water tank. Rear pump FP 16/8 with 174 operating hours (last pump service in 2025 at 171 hours). Rapid intervention line with dimensionally stable hose (30 meters) on the rear right side. Light mast between the cab and the superstructure. Wheelbase 3600 mm. Leaf spring suspension. ABS. 6 seats. WEBASTO AirTop - auxiliary heater. 2 breathing apparatus stations (the breathing apparatus holders were newly installed in 2017, the invoice from Lentner for 1415.00 EUR is available). New tires in 2018 (Continental 10R22.5 with snowflake symbol, DOT 2018, invoice for 4055 EUR). Numerous original documents are available, including the CAD construction drawings of the tanker fire engine from 1998 by METZ, various TÜV reports, repair invoices from MAN, 2 inspection books, mileage log, etc. Original price was 295,000 DM, a considerable price at the time for a new fire engine. Overall dimensions: Length 7.30 m, width 2.50 m, height 3.15 m. Unladen weight: 7830 kg. Permissible total weight was originally 12,000 kg. Upgraded in 1998 with TÜV approval to 13,500 kg. Six-cylinder inline diesel engine with 6871 ccm and 220 hp. Euro 2. 6-speed manual transmission. 95 km/h. Small ball-type trailer coupling with 2000 kg towing capacity (braked) and 1500 kg towing capacity (unbraked). Fire extinguishing pump completely checked by Rosenbauer in 2020 at 149 operating hours; 3 new shut-off valves were installed, and the Vacumatic venting system was repaired. This beautiful used vehicle is still in excellent condition and has the full potential to continue providing many years of high-quality service for a fire department. According to a written statement from the municipality, the TLF has been completely accident-free to date. There is no rust to be found anywhere, and no other defects are known. This is a really good vehicle. The TÜV inspection is due in August 2026 and will be renewed by us on August 25, 2026. The inspection certificate (SP) is valid until 08/2027. The approximately 22,800 total kilometers can be verified as the original total mileage of this fire engine. This fire engine is available immediately. This offer applies only to commercial enterprises and freelancers of all kinds, as well as to authorities and emergency services. Unfortunately, we do not sell to private individuals. Subject to prior sale and errors. The purchase price is understood as the final price, gross = net according to §25a UStG (differential taxation). Thank you for your inquiry.

Condition: used, functionality: fully functional, Year of construction: 1990, operating hours: 11,500 h, load capacity: 20,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: duplex, construction height: 4,800 mm, fork carriage width: 2,900 mm, fork length: 2,400 mm, total length: 6,100 mm, drive type: Diesel, construction width: 3,050 mm, Heavy-duty forklift - Diesel Load center: 1200 Kdodpfx Aszu T Rpsbner Mast type: Duplex Transmission: Clark HR32 - overhauled in 2021 Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 14.00-24 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 14.00-24 Rear tire condition: 60 - 80% New: Forks, lifting chains, front tires

Condition: good (used), Year of construction: 1995, operating hours: 15,445 h, load capacity: 2,000 kg, lifting height: 4,300 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, Yale GDP20AF Duplo 430 Sideshift Diesel 1995 A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always on-site. Kdjdpfezuwh Esx Abnjr Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland