Recycling pelletizing extrusion line

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 140 2814, conveyor belt width: 700 mm, sheet thickness (max.): 4 mm, The payment deadline for the machine is 18.05.2026! Submitting a bid obligates you to collect the machine on time by 22.05.2026! TECHNICAL DETAILS Band width: 60 - 700 mm Sheet thickness: 0.5 - 4 mm Feed length: 0 - 700 mm Fedpfsy Nkdlox An Rjpg

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, Fjdpfx Anjiyyf Ie Rjpg with single-screw or twin-screw extruder.

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 140 256.4, conveyor belt width: 600 mm, sheet thickness (max.): 4 mm, The payment deadline for the machine is 18.05.2026! Submitting an offer obligates you to collect on time by 22.05.2026! TECHNICAL DETAILS: Band width: 600 mm, Sheet thickness: 0.5 - 4 mm, Feed length: steplessly adjustable 30 - 500 mm. Fpjdpfx Aoy Nkb Den Rjg

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 4004/1135, conveyor belt thickness: 3 mm, conveyor belt width: 600 mm, power: 5 kW (6.80 HP), The payment deadline for the machine is 18.05.2026! Submission of a bid requires timely collection by 22.05.2026! TECHNICAL DETAILS Band width: 100 - 600 mm Band thickness: 0.5 - 3 mm Max. load: 11 t MACHINE DETAILS Voltage: 24 / 380 V Frequency: 50 Hz Power: 5 kW EQUIPMENT Decoiler Integrated feed unit Fpedpfjy Nkaajx An Rsg

Year of construction: 2006, condition: like new (used), Container volume 32 m3 Fpodpfx Anjfhb Tke Rog

Condition: defective spare-parts repository (used), Year of construction: 2005, operating hours: 38,534 h, functionality: not functional, machine/vehicle number: 29310001024, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain iTNC530, rotational speed (max.): 18,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 750 mm Travel Y-axis: 600 mm Travel Z-axis: 560 mm Worktable size: 950 x 650 mm Table load: 1,000 kg Spindle speed: 18,000 rpm Number of axes: 3 Tool changer: 30 positions Tool holder: HSK63 MACHINE DETAILS Fpedpfoy Ib H Iex An Rsg CNC control: Heidenhain iTNC530 Dimensions & Weight Dimensions (L x W x H): 3,500 x 3,000 x 3,200 mm Transport dimensions (L x W x H): 3,500 x 3,000 x 3,200 mm Weight: 10.2 t Operating hours Spindle hours: 38,534 h Operating hours: 98,381 h Note: DMG has measured the clamping force on the machine, which is so low that there is a risk of the tool falling out. The machine has suffered spindle damage. There are various leaks, for example at the chip conveyor or in the door area.

Condition: defective spare-parts repository (used), Year of construction: 2003, operating hours: 30,434 h, functionality: not functional, machine/vehicle number: 1114 000402 3, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Heidenhain iTNC530, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fjdpfx Anjy Ib A No Repg X-axis travel: 1,060 mm Y-axis travel: 710 mm Z-axis travel: 710 mm Working area: Ø800 NC rotary table Spindle speed: 10,000 rpm Number of axes: 5 Tool changer: 30 stations Tool holder: HSK63 MACHINE DETAILS Control: iTNC530 Dimensions & Weight Machine dimensions (L x W x H): 4,080 x 4,490 x 3,117.5 mm Transport dimensions (L x W x H): 3,500 x 2,500 x 2,410 mm Weight: 9.7 t Operating hours Spindle hours: 30,434 h Operating hours: 66,001 h Note: The machine temperature rises immediately, and in the past there has even been smoke. The machine has spindle damage. Various cable insulations are worn.

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0540/98, functionality: fully functional, Manufacturing number: 0540/98. Year of manufacture: 1998 ,. Capacity: 400 tons. Stroke length: 300 mm. Stroke: 10-40 / min. Slide adjustment 300 mm. Installation height: 700 mm. The table measures 1600 x 1300 mm Net weight: 45 tons. Gable opening: 1600 mm. Exterior dimensions 2 x 3 x 6 meters. Fpodpfx Asicbbzen Reg Control system MEAB. Coil feeder / straightener iRON RNE 50B / 11. Decoiler iRON SA6000 max 700 mm.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: W42365L00150, Year of construction: 2022, operating hours: 1,792 h, load capacity: 2,500 kg, empty load weight: 690 kg, total height: 1,300 mm, total length: 3,500 mm, total width: 800 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated load capacity: 2,500 kg MACHINE DETAILS Charger: E24/55 HFX Operating hours: 1,792 h Dimensions & Weight Dimensions (L x W x H): 3,500 x 800 x 1,300 mm Unladen weight: 690 kg FEATURES Charger PIN code unlocking Fpsdpfsy H Dk Hox An Reg The following technical data is based on the manufacturer's datasheet. The seller cannot guarantee its accuracy. Load centre: 600 mm Distance from wheel axle to load carrier face: 975 mm Wheelbase: 1,478 mm Wheels Tyres, drive side / load side: Rubber + Polyurethane / Polyurethane Drive wheel dimensions: Ø 230 x L 90 mm / Ø 230 x L 100 mm Load wheel dimensions: Ø 85 x L 85 mm Load wheel dimensions, bogies: Ø 85 x L 60 mm Number of wheels, drive side / load side: 1X + 2 / 2 Number of wheels, drive side / load side with bogies: 1X + 2 / 4 Track width drive side: 502 mm Track width load side: 380 mm Dimensions Lift: 125 mm Drawbar height in travel position: min. 1,030 mm / max. 1,115 mm Height at fork tips: 86 mm Distance to load carrier face: 1,170 mm Outer fork arm width: 520 / 540 / 560 / 680 mm Ground clearance, wheelbase centre: 35 mm Load dimensions: 800 x 1,200 mm Aisle width with 800 x 1,200 mm pallet, transverse: 2,790 mm Turning radius, initial lift raised/lowered: min. 2,095 / 2,165 mm Performance Data Travel speed with/without load: 10 / 12 km/h External reference: W42365L00150

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: W42365L00151, Year of construction: 2022, operating hours: 1,666 h, load capacity: 2,500 kg, empty load weight: 605 kg, total height: 1,700 mm, total length: 2,300 mm, total width: 800 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated load capacity: 2,500 kg MACHINE DETAILS Charger: HFX 1600/3200 Operating hours: 1,666 h Dimensions & Weight Dimensions (L x W x H): 2,300 x 800 x 1,700 mm Unladen weight: 605 kg EQUIPMENT Battery charger PIN code unlocking The following technical data is taken from the manufacturer’s datasheet. The seller cannot guarantee its accuracy. Load center: 600 mm Distance from load wheel axle to load carrier surface: 975 mm Wheelbase: 1,478 mm Wheels Tires, drive side / load side: Rubber + polyurethane / polyurethane Drive wheel dimensions: Ø 230 x L 90 mm / Ø 230 x L 100 mm Load side wheel dimensions: Ø 85 x L 85 mm Load side wheel dimensions, bogie: Ø 85 x L 60 mm Number of wheels, drive side / load side: 1X + 2 / 2 Number of wheels, drive side / load side with bogie: 1X + 2 / 4 Track width drive side: 502 mm Fjdsy H Dcijpfx An Rspg Track width load side: 380 mm Dimensions Lift: 125 mm Tiller height in travel position: min. 1,030 mm / max. 1,115 mm Height at fork tips: 86 mm Distance to load carrier surface: 1,170 mm Fork dimensions: 55 / 165 / 1,150 mm Outer fork width: 520 / 540 / 560 / 680 mm Ground clearance at centre of wheelbase: 35 mm Load dimensions: 800 x 1,200 mm Aisle width with 800 x 1,200 mm pallet, transverse: 2,790 mm Turning radius, initial lift raised / lowered: min. 2,095 / 2,165 mm Performance data Travel speed with/without load: 10 / 12 km/h External reference: W42365L00151

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm Fedpowi Tidjfx An Rjpg finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: W42364L00583, Year of construction: 2022, operating hours: 2,593 h, load capacity: 2,000 kg, empty load weight: 595 kg, total height: 1,300 mm, total length: 2,300 mm, total width: 800 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated load capacity: 2,000 kg MACHINE DETAILS Charger: E 24/55 HFX Operating hours: 2,596 h Dimensions & Weight Dimensions (L x W x H): 2,300 x 800 x 1,300 mm Unladen weight: 595 kg EQUIPMENT Charger Key The following technical data are taken from the manufacturer's datasheet. The seller cannot guarantee their accuracy. Load center: 600 mm Distance from drive axle to load carrier surface: 975 mm Wheelbase: 1,478 mm Wheels Tyres, drive side / load side: Rubber + polyurethane / polyurethane Drive wheel dimensions: Ø 230 x W 90 mm / Ø 230 x W 100 mm Load wheel dimensions: Ø 85 x W 85 mm Load wheel dimensions, bogie: Ø 85 x W 60 mm Number of wheels, drive side / load side: 1X + 2 / 2 Number of wheels, drive side / load side with bogie: 1X + 2 / 4 Track width drive side: 502 mm Track width load side: 380 mm Dimensions Fpsdpfx Ansy H Dbrj Reg Lift: 125 mm Drawbar height in operating position: min. 1,030 mm / max. 1,115 mm Height at fork tips: 86 mm Distance to load carrier surface: 1,170 mm Fork dimensions: 55 / 165 / 1,150 mm External fork width: 520 / 540 / 560 / 680 mm Ground clearance at centre of wheelbase: 35 mm Load dimensions: 800 x 1,200 mm Aisle width with 800 x 1,200 mm pallet transverse: 2,790 mm Turning radius, initial lift raised / lowered: min. 2,095 / 2,165 mm Performance Data Travel speed with load / without load: 10 / 12 km/h External reference: W42364L00583

Condition: ready for operation (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, clamping force: 1,000 kN, injection weight: 15 g, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high abrasion resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h FEATURES 1 vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping unit tie bars, manually operated, working position adjustable between 70 and 250 mm 2 x core pull Open nozzle 15 mm wear-resistant, without heating band (1st injection unit 150) Fedpfoy Hki Ajx An Repg Technology level 2 – servo-regulated hydraulic system with two variable displacement pumps Technology level 3 hydraulic system with three variable displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line for 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit For VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/manual

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Fjdpfx Anefz U S Eo Rspg Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,790 h, functionality: fully functional, travel distance X-axis: 2,032 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, table load: 3,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel X-Axis: 2,032 mm Travel Y-Axis: 750 mm Travel Z-Axis: 750 mm Max. workpiece height: 870 mm Max. table/workpiece load: 3,000 kg Table width: 800 mm Table length: 2,240 mm Spindle speed: 40 – 6,000 rpm Spindle taper: SK 50 Fedpfx Anoy Hkhrs Ropg Standard spindle power: 18.5 kW Standard torque: 759 Nm Increased spindle power: 26 kW Increased torque: 1,067 Nm MACHINE DETAILS Control system: MAZATROL Dimensions & Weight Dimensions (L x W x H): 5,685 mm x 4,096 mm Weight: 14,000 kg Operating hours: 32,790 h EQUIPMENT Measuring probe (manufacturer: Renishaw) Chip cart 47 SK50 tool holders, including approximately 25 Weldon holders Emulsion cleaning unit