Scrap shear

Aymas Recycling Machinery IS 1350 Inclined Shear

Condition: good (used), functionality: fully functional, power: 22 kW (29.91 HP), overall weight: 2,600 kg, Year of construction: 2006, Eric Schomberg ES 60/120 Shredder in good condition for sale year of manufacture: 2006 Cutter width 600 mm Cutter length 1200 mm Cutter shaft center distance 250 mm Cutter shaft speed approx. 16 rpm Gedpfxstzbvyj Agbsbg Cutter shaft torque approx. 17,000 Nm Filling hopper 1,200 mm x 2,400 mm Drive power 2 x 11 kW Total drive power 22 kW Weight 2,600 kg

Condition: new, Year of construction: 2023, Sell ​​an alligator shears, metal shears for cables, pipes, profiles Max. cutting force 630 kN Cutting length 600 mm Gbsdpfx Agelhrb Hebeg Max opening 280mm hydraulic Pressure 25Mpa full cycles p. minute 7-8×/min. Power consumption 7.5 kW Weight approx. 1,400 kg Size (L×W×H) 1600×700×1300

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Gedpfxouxmt Tj Agbjbg Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Condition: new, The solution for shredding large, long pipes and profiles. The ZRS series has been specially developed for shredding pipes with diameters of up to 1,300 mm and made of different materials such as PE, PP, PVC. These machines can directly shred plastic pipes up to a length of 9 meters without prior cutting or sawing. At the heart of the machines are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low speed. Gbedpfoghgd Isx Agbjg The pipe is fed into a closed feed trough in which the pipe is pressed against the rotor by means of a hydraulic ram. The pre-shredded material is then fed from the shredder to a granulator via a conveyor belt. The granulator grinds the material into a directly processable regrind. The entire plant is operated automatically via a central control unit. Another advantage of the plant is the low energy requirement, the avoidance of power peaks, and the minimization of accident risks during pre-shredding.

Condition: like new (used), Year of construction: 2023, operating hours: 3,000 h, functionality: fully functional, For sale is a mobile Lefort scrap shear. The machine is in very good condition and can be inspected at any time. Gjdpfx Agex Elyaebjbg

Condition: used, machine/vehicle number: 2520, round bar steel:42 mm square edge steel:38 mm L-beam:90° 110x10 mm flat steel:150 x 16 mm blade length:250 mm notching deepth up to:12 mm notching: l + T material:80 x 10 mm hole punhing press: pressure:50 t stroke:27 mm hole punching press: capacity (dia. x thick.):25 x 16 / 20 x 19 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:1,6 x 0,85 x 1,8 m Gbedpfxocxxrpe Agbsg

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Condition: Excellent Use: PET / PP / PS Foil or Sheet PET: Thickness Range: 0.25 - 2.2mm Gedpfovbcbuex Agbebg Output: 2,000 kg/h Max Sheet Width: 1600mm Extruder: RZE 120mm Electrical Supply: 3 x 480V 60Hz with N Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: new, Year of construction: 2023, machine/vehicle number: 7YXXX, VIS G is the ideal and the most efficent solution for serap processing like stampings, trimmings, wires mostly recommended for the automotive industry, metal recyclers and non-ferrous metal remelting industry. Gbsdpfx Agsmqi Akebsg

Year of construction: 2010, condition: good (used), 2 SICON shredders Year 2010 Gbodpoiz Tm Ijfx Agbsg The electrical cabinet is missing Price 15 000€ each 4 densimetric tables : 8 000€ each

Condition: reconditioned (used), Year of construction: 2002, 4200 x 2500 x 650 mm Table size The table moves 3000 mm outwards for loading For tools up to 4200x2500x1500mm Tool weight up to 40 T Speed at 700 T still 62 mm/sec, at 1200 T still 35 mm/sec. ram size is 4200x1750 mm maximum open height 2200 mm drawing cushion with 50 to 500 T drawing cushion stroke 400 mm drawing cushion size 3100x1600 mm drawing cushion speed 150 mm sec. ram drawing cushion with 150 mm stroke 1600 mm stroke Gsdsgphaxopfx Agbobg 475 KW, 890 Amps 210 T machine weight new motors new control system Was used for 3 years at a German automotive company and then sold to Brazil to an auto parts manufacturer. Worked there until 2020.