Used tool milling machines - univ.conv. 400-499mm X-axis travel for sale (53)

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-axis Heidenhain ND780 Digital Readout, special finish in light grey!!! Technical Data: >> Year of manufacture: 1986 Machine No. 2203-2126 >> Fixed angle table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head on spindle support adjustable by 150 mm >> Vertical and horizontal quill – SK40 >> Vertical quill extendable by 90 mm >> Pull stud system: M16 >> Weight approx. 1,500 kg Accessories and Features: >> 3-axis digital readout Heidenhain ND780 >> Coolant system >> Chip tray >> Central lubrication About the machine: Fpodpfxjylmh Dj Alqog Offered is a Deckel FP4M universal milling machine in very good condition. The machine has been partially overhauled, with minimal backlash and all leadscrews move smoothly and evenly. The milling machine runs quietly even at maximum speeds. Rapid traverse is available on all axes and all bellows are new. The fixed angle table has been newly scraped. A reliable and user-friendly machine. Oil change carried out. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. Take the opportunity to view and test the machine under power at our facility. For an additional charge, the machine can be supplied in CE-compliant configuration.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2836-0192, Machine in good used condition, Dialog 11 control. Until recently, it was only rarely in operation in our own workshop. Documentation/manuals etc. are available. Additional accessories, cutters, zero point probes, etc. can be purchased optionally. Fpsdpfoylawxox Alqeg

Condition: repair required (used), Year of construction: 1989, functionality: limited functionality, !!! SPECIAL OFFER!!! For sale are 2 active milling machines of the brand Hermle and the type UWF 801 Price for both machines in a package One machine has an error when moving in Y, the 2nd machine is missing relays. The idea would be to make one machine out of 2. The value of a functional machine would be approx. 10,000 € What makes the machine special is its active control, which allows it to set feeds that stop at a predetermined level. The machine is easy to operate and yet efficient, which makes it ideal for the do-it-yourselfer but also for industry. x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm Spindle holder ISO: SK40 Control: TNC 114 Spindle head swivels left and right: right/left = 90° ° Vertical quill stroke: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed rate:: X+Y: 4 - 1600 steples mm/min Feed rate:: Z: 4 - 1000 steples mm/min Rapid traverse: X+Y: 1.6 iand Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Weight approx.: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale Fpsdpst Ifm Njfx Alqeg PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), feed length X-axis: 400 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, For sale is a conventional milling machine of the brand Deckel and type FP2 The machine is in very good condition, has been overhauled by the Harich company (date unknown) and is ready for immediate use Technical data Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle travel: 60 mm Horizontal spindle travel: 100 mm Fsdpfx Aleu Ti Akjqopg Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg Vice and tools are NOT included in the offer, but can be offered. On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 1968, condition: good (used), For sale is a milling machine Deckel brand from 1968 Fedpfxjihf Ete Alqepg The machine is in a good to very good condition and fully functional (No digital display but can be mounted additionally on request) Technical data: Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm speed range: 40 - 2000 rpm spindle travel vertical: 60 mm spindle travel horizontal: 100 mm feeds: 8 - 400 mm/rev table size: 700 x 330 mm motor power: 2,2 kW connection: 400 V / 16 A plug weight: approx. 1300 kg All prices plus VAT Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: new, Year of construction: 2026, 420 mm 220 mm 380 mm 840x390 mm 950x250 mm 65-2600 U/min Fjdpfjxfb H Tox Alqepg DIN 2080 ISO 40

Condition: new, Year of construction: 2025, 600 mm 500 mm Fpjdpfx Alewp Tqboqjg 400 mm 1000x500 mm 1200x250 mm 40-3200 U/min DIN 2080 ISO 40

Condition: good (used), Year of construction: 2006, Universal tool milling machine KNUHT type: WF 5 year 2006 with 3-axis digital indicator, stepless feeds, hydraulic tool clamping. Table size : 800 mm X 300 mm max. load 350 Kg. Travels : X/Y/Z 450/400/320 Spindle mounting : ISO 40 spindle speed : 63 - 3150rpm Stepless feeds : 5-1250mm/min rapid traverse .1800mm/min Space requirement : 1,7m X 1,7m X 1,9m Weight.ca.1800Kg. Machine docs available ,machine demonstration ready undercurrent . Fodpfx Aeichr Sjlqepg

Condition: good (used), Tool Milling Machine Stock number: 3008 Manufacturer: Deckel Machine number: 46445 Type / Model: FP 2 Travel paths x-y-z: 400 - 200 - 400 mm Table: 700 x 285 mm Speed range: 40 to 2,000 rpm Spindle taper: SK 40 Feeds: 8 to 400 mm/min Connected load: 2.2 kW Fjdpfx Alowy Dl Dsqepg Accessories/Equipment: Elesta digital readout Condition: Good Weight: 1.2 t Dimensions: 1,000 x 1,200 x 1,800 mm

Year of construction: 1998, condition: used, x-travel // mm y-travel / mm Fsdpfjig A Erox Alqopg z-travel // mm total power requirement / kW weight of the machine ca. 950 KG

Condition: good (used), Universal milling machine STANKO 676P Longitudinal table travel X: 400 mm Vertical table adjustment Y: 380 mm Upper arm transverse adjustment Z: 250 mm Clamping surface of the vertical table clamping surface: 250 x 630 mm Spindle mount: MK 4 Quill stroke: 60 mm Swivel angle of the vertical head: +-90° Table size of the rigid angle table: 800 x 250 mm Distance between horizontal milling spindle and rigid angle table: 80 - 460 mm Distance between vertical milling spindle and rigid angle table: 0 - 380 mm Distance between vertical vertical spindle and column: 125 - 375 mm 16 spindle speeds horizontal: 50 - 1630 rpm. Fjdpfstrybgex Alqopg 16 spindle speeds vert.: 60 - 2040 rpm. 16 longitudinal and vertical feeds: 13 - 395 mm/min. 16 headstock feeds: 13 - 395 mm/min. Rapid traverse all axes: 0.935 m/min. Drive power: 2.2 kW Weight approx.: 1.4 t used, in good condition

Condition: used, Year of construction: 1997, Control Heidenhain 355 x-travel 850 mm y-travel 550 mm z-travel 450 mm tool taper SK50 weight of the machine ca. 5,5 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Fedpfx Aed N Smhelqepg +++++

Condition: used, The FPK 5 is a top-of-the-line Conventional Vertical Milling Machine within the Toolroom Milling Machines category, offering a versatile and robust solution for various milling applications. This universal tool milling machine stands out with its vertical and horizontal spindle configuration, swiveling vertical head, and extensive clamping surfaces, making it an excellent choice for tool and mold making, repair workshops, and educational environments. Designed for flexibility, the FPK 5 excels in single-part construction and small to medium-sized batches, thanks to its easy setup and reliable operation without extensive programming. The machine features exceptional rigidity and performance, a heavy fixed-angle table with high load capacity, and a manual central lubrication system for optimal maintenance. With standard equipment that includes a coolant system, 3-axis position indicator, and easily accessible controls, the FPK 5 is engineered to enhance efficiency and precision. Experience the reliability of KNUTH engineering with this advanced milling machine; buy now to elevate your machining capabilities. Fsdowut Evspfx Alqepg

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control Very Good CONDITION CE-Compliant!! Technical Data: >> Year of manufacture: 2008 Machine No. BA1DW2501 >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Max. load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed: 10–2000 mm/min Rapid traverse X: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal spindle – SK40 >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight approx. 2000 kg >> Dimensions approx.: 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged safety enclosure >> Coolant system >> Machine lamp Fedewxxdfjpfx Alqopg >> Dividing head with tailstock >> Counterholder >> Röhm machine vice About the machine: For sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a government facility where it was only used occasionally. The control system is very user-friendly. Furthermore, the machine is equipped with hydraulic clamping in both vertical and horizontal modes. Switching from vertical to horizontal operation is very simple by folding away the vertical head. The Emco has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the machine under power at our location.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication >> 2 x emergency stop Fodovbifgopfx Alqjpg >> Operating instructions >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Condition: used, Universal Tool Milling Machine WEMAS - MAKOSON Type WM 2 Year of manufacture: 1992 Travel ranges X: 480 mm, Y: 350 mm, Z: 250 mm Table size: 800 x 400 mm Spindle taper: ISO 40 Quill vertical travel: 80 mm Spindle speed: 35 to 4000 rpm, 3 steps Feed X, Y, and Z: 1 to 850 mm/min, stepless Rapid traverse X, Y, and Z: 1 m/min Spindle drive: approx. 3 kW ?? Electrical connection: 400 Volt, 50 Hz - Swiveling control panel with HEIDENHAIN digital readout, type Positip 850 - Spindle speed via 3 gearbox stages and stepless adjustment via frequency converter - Conventional handwheels for X, Y, Z - Vertical milling head with drilling quill swiveling +/- 90° - Manual tool clamping with M16 thread - Manual central lubrication - Coolant system integrated in machine base - Control cabinet fixed to the machine - Fixed angle table Fodpfx Alsx Hkd Toqepg Space requirement L x W x H: 1900 x 1700 x 1820 mm Weight: approx. 2000 kg In good condition

Condition: used, Year of construction: 2023, gebraucht 2023 4546 prompt, Zwischenverkauf v Taiwan 32800 € 1 65 - 2600 U/min ISO 40 420 x 220 x 380 mm 840 x 390 mm 2.2 kW 1600 mm 1700 mm 2000 mm 1145 kg 840 x 390 mm 1000 mm/min 5 14 x 63 mm 200 kg 420 mm 220 mm 380 mm 0 - 600 mm/min. 0 - 600 mm/min. 65 - 2600 90 - 310 mm 65 - 2600 +/- 90° ° 100 mm manuell 2,2 kW 950 x 250 mm 90 - 310 mm 100 - 480 mm demo machine / mint condition net price (price for new machine € 41.100,00) swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 2,2 kW feed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch Fjdpfx Aewirdgjlqepg table safety guard with doors with switches outer arbor support for horizontal spindle LED work lamp automatic lubrication for X/X/Z guidways safety hand wheels for X/Y/Z axes coolant equipment with chip tray covers for X/Z axes level pads and bolts tool box with tools operating manual in English or German according to CE rules

Condition: used, x-travel 400 mm Fpsdpfexv D Uzsx Alqsg y-travel 400 mm z-travel 300 mm rapid traverse 1,2 m/min feed range 5 - 500 mm/min creep feed 1:100 tool taper ISO 40 stroke v60 h70 mm table - universal ca. 620 x 320 mm table vertical adjustable 350 mm weight of the machine ca. 1200 kg Machine was used in a public facility and is in good condition. Machine can be viewed under power by prior appointment

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Deckel FP4MK with 3-Axis Heidenhain Active Digital Readout in Light Grey, Very Good Condition, CE Compliant! Technical Data: >> Year of manufacture: 1992 Machine No.: 2203-8489 >> Fixed angle table >> Speed range: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm Fpjdjw Evq Aspfx Alqeg >> Vertical milling head can be moved on the spindle carrier >> Vertical quill and horizontal quill – ISO 40 taper >> Vertical quill extension: 90 mm >> Hydraulic drawbar system >> Weight approx. 1,600 kg Accessories and Features: >> 3-axis active digital readout (Heidenhain) >> Coolant system >> Chip tray >> Centralized electric lubrication >> Operating manual, spare parts diagrams About the Machine: Offered is a Deckel FP4M Aktiv universal milling machine in very good condition, CE compliant. The machine has very little backlash in the handles, and all spindles move smoothly. Even at maximum speeds, the milling machine runs quietly. It features a hydraulic clamping system. On this newer FP4 model, the feed is infinitely variable on all three axes, and each axis has rapid traverse. A major advantage is the active 3-axis digital readout. With this Heidenhain linear control, you can input dimensions that the machine will approach automatically. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and more precise. Take the opportunity to view and test the machine under power on site.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Digital Readout Heidenhain, infinitely variable feed, in very good condition Technical Data: >> Year of manufacture: 1978 Machine No.: 2202-10163 >> Fixed angle table >> Spindle speeds: 25 - 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head can be shifted 150 mm on spindle carrier >> Vertical and horizontal quill - SK40, extendable >> Drawbar system S20x2 >> Weight approx. 1400 kg Accessories and Equipment: Fpjdpoxghtvefx Alqsg >> 3-axis digital readout from Heidenhain >> Coolant system >> Mechanical central lubrication About the machine: Offered here is a Deckel FP2 universal milling machine in very good condition. The FP2 has very little backlash, and all spindles move smoothly. The machine runs quietly even at maximum speeds. On this newer FP2 model, the feed rate is infinitely adjustable on all three axes, and each axis is equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and improves precision. You are welcome to view and test the machine under power at our facility.

Condition: used, Year of construction: 2006, x-travel 560 mm y-travel 300 mm z-travel 420 mm Fpodpfx Alexfb Hteqog table-size 1055 x 240 mm spindle taper ISO Sk 40 spindle turning speed range 40 - 1550 U/min total power requirement 5,5 kW weight of the machine ca. 1,3 t dimensions 1,6 x 1,5 x 1,85 m Universal milling machine - Digital display - Chip guard - Coolant system - Machine light - Chip tray

Condition: used, Year of construction: 1986, x-travel 400 mm y-travel 375 mm z-travel 250 mm table-size 600 x 300 mm quill stroke 50 mm spindle taper ISO 40 spindle turning speed range 50-400 , 400 - 3150 U/min CNC-control TNC 135 voltage 380 V / 50 Hz feeds X+Z = 5 -1000 mm/min rapid traverse X+Z = 2,4 m/min feeds Y = 5 -670 mm/min rapid traverse feeds Y = 1,6 m/min measuring system resolution capability 0,005 mm Fedpfxjxc Nwne Alqopg total power requirement 3,7 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 1,8 x 1,70 m • HEIDENHAIN TNC 135 control,

Condition: like new (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 580 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 4,000 rpm, controller model: Contour 1, NC Milling Machine Deckel FP4A We are offering for sale a perfectly maintained Deckel FP4A CNC milling machine (very low operating hours, in as-new condition)! Technical Details: - Travel (X): 580 mm - Travel (Y): 400 mm - Travel (Z): 450 mm (390 mm*) - Table size: 460 x 800 mm - Spindle speed range: 40 – 4000 rpm - Feed rate: 2 – 3600 mm/min - Rapid traverse: 4.0 m/min - Spindle taper: SK 40 - Machine dimensions (LxWxH): approx. 3.0 x 2.10 x 2.10 m - Spindle drive power: 4.0 kW - Control: Contour 1 Description: CNC-controlled tool milling machine, equipped with Contour 2 control. Features include a vertical head rotatable +/- 90° with quill travel of 80 mm, horizontal spindle, power feeds & rapid traverse on all 3 axes, hydraulic tool clamping, flying desk, electronic handwheel, automatic central lubrication, coolant system, safety emergency stop, chip tray, and separate electrical cabinet. The machine is in top working condition. Note: This additional information is standard for this model. Please always verify the exact configuration during inspection. The DECKEL FP4A Universal Tool Milling Machine, built in 1985, is a classic and highly versatile metalworking machine renowned for its precision and flexibility – testament to Deckel’s strong tradition of engineering quality. Fjdpfx Asxzpwfelqjpg The FP4A features a robust bed-type construction, delivering the necessary stability for precise milling tasks. Its universal tool milling head is a highlight, enabling a wide spectrum of operations—from basic drilling to complex contouring and profiling. This versatility makes it a valuable asset in tool and die manufacturing, as well as mold making. Key technical features of the 1985 DECKEL FP4A include a generously sized worktable, infinitely variable spindle speed adjustment, and an intuitive control interface for efficient programming and machine operation. The advanced CNC technology contributes to exceptional accuracy and operator convenience. Despite its age, the DECKEL FP4A continues to be a trusted solution for applications requiring flexible tool milling. Its reputation for reliability and precision makes it an essential tool for modern metalworking and manufacturing operations. Deckel’s legacy of quality and innovation in the field of metal machining is clearly evident in this model.

Condition: used, Year of construction: 1971, x-travel:450 mm y-travel:320 mm z-travel:450 mm table-size:950 x 300 mm spindle turning speed range:39-2320 U/min spindle taper:SK 40 power capacity - milling spindle:2,5 kW total power requirement:2,8 kW Fpjdpfx Aeiv Tf Helqjg weight of the machine ca.:1,3 t dimensions of the machine ca.:1,4 x 1,3 x 1,8 m with vertical head, spindle quill, swivelling horizontal spindle, variable adjustable feed for all 3 axes, coolant device, machine light, chip pan, emergency cut-off

Condition: used, Year of construction: 2002, x-travel 400 mm y-travel 320 mm z-travel 440 mm table-size 80 x 325 mm spindle taper ISO Sk 40 spindle turning speed range 63 - 3150 U/min quill stroke 60 mm weight of the machine ca. 1,5 t Fodpfx Alsw Tdxioqopg dimensions 1,8 x 1,8 x 1,9 m Universal Milling Machine - Digital Display - Hydraulic Tool Clamp - Central Lubrication - Coolant System - Machine Light - Machine Feet - Counter Bearing - Chip Tray