Tool Room Milling Machine - Universal

MAHO MH 500

Condition: ready for operation (used), X-travel: 500mm, y-travel: 400mm, z-travel: 350mm, quill stroke: 50mm, rotational speed: 20-5000/min, connected load: 10kVA, controls: Maho CNC 432, length: 2022mm, width: 3030mm, height: 1915mm, weight: 2.1t, operational hours counter: 29,578h, with documentation, without spare parts, mechanically and electrically the machine runs flawlessly, the control elements were recently overhauled. Fsdpfx Aokn R Dhsc Njfu

Condition: good (used), Industrial robots Manufacturer: Kuka Model: KR30-3, KR30-3 F, KR30L16-2 Model: KR60HA, KR60L30HA Fodpfxetui D Ts Ac Njfu All models equipped with KRC4 control system Kuka KR30-3 KRC4, year of manufacture 2014-2017 = several units in stock Kuka KR30-3 Foundry KRC4, year of manufacture 2018 Kuka KR30L16-2 KRC4, year of manufacture 2017 = several units in stock Kuka KR60HA KRC4, year of manufacture 2014 Kuka KR60HA KRC4, year of manufacture 2018-2019 = several units in stock Kuka KR60L30HA KRC4, year of manufacture 2017 = several units in stock

Condition: ready for operation (used), Travel path X/Y/Z: 500mm/380mm/350mm, table dimensions X/Y: 800mm/400mm, spindle taper: SK40, quill stroke: 50mm, speed: 5000rpm, rapid traverse: 4m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1800mm/2000mm/2000mm, weight: approx. 2000kg, control: Heidenhain CNC 432. An on-site inspection is possible. Ffedpfew Nq Snsx Ac Neu

Condition: used, Year of construction: 1975, Technical details: x-travel: 300 mm y-travel: 350 mm Fjdpfx Aeu T Navsc Nefu z-travel: 350 mm quill stroke vertical: 60 revolution per minute: 40 - 2000 U/min feed:: 12,5 - 500 / 18 step mm/min. tool taper: SK 40 headstock adjustment: schwenkbar 90° rechts/links mm headstock adjustment: Y-Weg: 175 mm table surface area: 600 x 285 mm distance spindle nose and table: min./max.: 50 / 400 mm distance spindle center to column: min./max.: 170 7 345 mm total power requirement: 1,6 kW weight of the machine ca.: 0,8 t dimension machine xH: 1,4 x 1,1 x 1,7 m Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display Heidenhain Coolant system *

Condition: good (used), Year of construction: 1992, 1,0 St. gebr. Flachschleifmaschine Ffodpfoi Ra Tysx Ac Nou Hersteller: ELB Typ: SUPER - RUBIN 024 CNC Baujahr: 1992 Verfahrwege: Schleiflänge: 600 mm Schleifbreite: 275 mm Schleifhöhe: 375 mm Tischaufspannfläche: 900 x 300 mm Tischbelastung: 300 kg Vertikal - Vorschub: max. 300 mm/min. Quervorschub: max. 2.000 mm/min. Steuerung: UNICON Im Lieferumfang sind Schleifscheiben enthalten siehe Fotos.

Condition: used, Year of construction: 1975, Technical details: x-travel: 300 mm y-travel: 175 mm z-travel: 350 mm Fjdpfx Asvc Avuoc Njfu quill stroke vertical: 60 mm revolution per minute: vert.+ horiz.: 40 - 2000 / 18 step U/min feeds:: 12,5 - 500 / 18 step mm/min. tool taper: SK 40 distance spindle nose and table: min./max.: 50 /400 mm distance spindle center to column: min./ax.: 170 / 345 mm table surface area: 670 x 285 mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t dimension machine xH: 1,4 x 1,05 x 1,6 m Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display Heidenhain Coolant system *

Condition: good (used), Year of construction: 1988, CNC milling machine MAHO Type: MH 500 W Year 1988 Heidenhain TNC 232 B control. Fsdpeich Ehjfx Ac Njfu With counter bearing for horizontal milling. Spindle mounting: ISO 40 spindle speed stepless 20 - 4000 rpm feeds : 1-3000 mm / min Travels : X 500 mm Y380 mm Z 350mm Table : 700 mm X 350 mm Weight.ca.2000kg. Machine documentation available Machine is ready for demonstration.

Condition: used, Kuka Robot KR 210 R3100 ultra Industrial robot KRC 4 KCP 4 Fully complete Fully operational In excellent condition While stocks last! Self-collection only, shipping on request. 57 units in stock. Fedpexv Sxnofx Ac Nsfu

Condition: good (used), Year of construction: 1990, CNC universal milling machine MAHO Type: MH 500 W Control MAHO 432 Foder Igv Rspfx Ac Nsfu Spindle holder : ISO 40 Spindle speed : 20 - 4000 rpm Travels : X 500 mm Y380 mm Z350 mm Table load capacity : 250 kg Machine in good condition from tool shop. Machine dimensions : Width 1500 mm Depth 2000 mm Height 1800 mm Weight .2100 Kg . Machine documentation available, machine can be demonstrated under power.

Condition: ready for operation (used), Year of construction: 1989, Available immediately from location: MAHO Toolroom Milling Machine Type MH 500 M Year of manufacture 1989 Heidenhain Digital Display Table 800 x 360 mm SK 40 Spindle speeds 63 – 4000 rpm Quill stroke 50 mm Ffedpfx Acsyg Ek Tj Nou Travel X/Y/Z 500/380/350 mm Drive 3 kW Feed rates 10 – 1000 mm/min Coolant system Weight 1600 kg Adapters Hydraulic vise Price: €3,000 plus VAT, ex location

Condition: used, Year of construction: 2003, - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-fold tool turret VDI40 - Year of construction 2003 Technical data Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore of main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: 5 - Spindle speeds: 2 - Constant cutting speed: 0-700 / 700-3000 rpm Feed rates: - Working feed Z/X: 0 - 7000 mm/min - Rapid traverse Z/X: 10 m/min Fodpfx Aouwrz Hjc Njfu Tailstock: - Tailstock shank Ø: 58 mm - Tailstock shank travel: 155 mm - Morse taper tailstock: 4 Motors: - Main motor power: 7.5 kW - DC motor Z-axis power: 12 Nm - DC motor X-axis power: 4 Nm - Motor pump power: 0.57 kW Dimensions: - Machine weight: approx. 2200 kg - Dimensions WxHxD: 2980 x 1730 x 1610 mm

Condition: used, Technical data: Working range X axis: 500 mm Y axis: 400 mm Z axis: 300 mm Work spindle Tool holder: ISO 40 Automatic feeds: 0.2 - 0.6 - 0.12 mm/min Spindle speeds: 20 - 4000 1/min, directly programmable Feed range: X / Y / Z = 1 - 3000 mm/min Rigid table: 700 x 350 mm, 5 T-slots Fixed table: max. load capacity 250 kg Connection: 400 V Ffodpfx Ajqbq Ufec Nsu Weight, approx.: 1900 kg Machine dimensions, approx.: 2400 x 1850 x 1850 mm Space requirement: 3200 x 4100 mm, height 1920 mm Features: - CNC control - Fixed table - Milling head swivels +/- 90 - Hydr. clamping device - Coolant device - Emergency stop button

Condition: good (used), x-travel 300 mm y-travel 350 mm z-travel 350 mm taper in main spindle ISO 40 table surface area 625 x 380 mm T-slots 8 Stk. turning speeds 40.0 - 2.000 U/min transmission ratio 18 Stk. feed stepless 0 - 500 mm/min quill stroke 60.0 mm distance spindle nose and table min 50 / max 400 mm voltage 400 V total power requirement 5.1 kW weight of the machine ca. 800 kg range L-W-H 1400 x 1100 x 1700 mm from a training workshop (vocational school) Well maintained (!!) Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot angle/clamping table * Swiveling +/- 30 degrees - Axis feed with rapid traverse in X+Z+Y axis * Rapid traverse continuously adjustable - Swiveling machine light - Control cabinet, installed on the left Fedpfxjxl E Ste Ac Nofu - Coolant device

Condition: used, Year of construction: 2002, Technical details: turning diameter: 475 mm turning length: 1500 mm control: HEIDENHAIN MANUAL PLUS 4110 turning diameter over slide: 260 mm turning speeds: 3000 U/min turret head: 12 Pos. spindle bore: 78 mm quill stroke: 120 mm weight of the machine ca.: 3,1 t dimensions of the machine ca.: 3,2 x 2 x 1,9 m SAUTER turret 12 pos. , VDI 30 chipconveyor, 4-jaw chuck Ffedpfx Aoxhqqmoc Neu approx. 74.000h "machine on" *

Year of construction: 1988, condition: good (used), For sale is a milling machine of the company Maho and the type 500 W The machine is in good condition and fully functional Year of manufacture: 1988 Heidenhain TNC 232 travels X- 500 mm, Y- 380 mm, Z-350 mm spindle mounting ISO 40 quill stroke vertical 50 mm spindle speed 20-4000 rpm, infinitely variable feed range 1-3000 mm/min Fedpeittrlsfx Ac Nefu rapid traverse 5 m/min table load 250 kg total power requirement 11,3 kW Machine weight approx. 2 t All prices plus VAT machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website