Tilting spindle moulder

CASOLIN - ITALY F 45 KL - CE STANDARD

Condition: reconditioned (used), Year of construction: 2004, AUTOMATIC WINDMILL PRESS WITH MECHANICAL LOCKING AND FEEDING AFTER A COMPLETE RENOVATION Bjdpfx Akslnanweneww

Condition: like new (used), Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, including support baskets Filter area: 77.6 m² Filter area load: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with feed hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring to raise the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz Bodpfozlbqrex Akneww - Protection class/design: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascade connection of up to 2 fans up to 37 kW with frequency converter interface - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hours counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touchscreen - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluation; rotation monitoring of the rotary valve - 24 V DC exhaust/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 running meters of cable - Ducting system including elbows, branches, reducers, PU hoses, machine connections, small parts, and EP dampers for exhausting 11 woodworking machines 1 HRS per specification - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base frame for ...

Condition: like new (used), Year of construction: 2018, operating hours: 800 h, functionality: fully functional, The machine is in like-new condition and has only 800 operating hours. CURSAL TRV 1200 E optimizing saw Year of manufacture: 2018 Saw blade diameter: 500 mm Maximum cutting height: 90 mm Maximum cutting width: 250 mm Adjustable feed rate, max. 195 m/min Bsdpfszlbizjx Aknsww Saw motor power: 7.09 kW Infeed table length: 3000 mm – belt-driven feed Outfeed table length: 5000 mm – 3 ejectors/sorters Machine in very good technical condition – lightly used Full optimization – industrial computer/controller allowing programming of up to 128 independent work programs, supporting up to 16 width classes and 8 wood quality classes.

Condition: new, Year of construction: 2026, extraction capacity ~ 6500 m3/h engine power 5.5 kW Bwjdpfx Akev Du Tnsnew rotation speed 3000 rpm nominal voltage 400 V, 50 Hz extraction nozzle 280/200 mm extraction speed 28 m/sec. Number of filters 35 DIMENSIONS (length x width x height) 920 x 2100 x 2250 mm weight 410 kg Filter category G Filter material polyester Noise level 80 dB without connection / 65 dB when connected via pipe to the machine Filter surface 17.1 m2 Negative pressure 3000 Pa Polyester filter, 3 microns 2 containers Drive system Filter cleaning using vibration system with control + 850 euros for the models with fire extinguisher (Safe System) + 500 euros for the models with inverter (speed control)

Condition: excellent (used), Year of construction: 2023, DEMONSTRATION MACHINE! For sale is a used Felder KF 700 SP sliding table saw & spindle moulder with a cutting width of 800 mm. The machine is in excellent condition and has been refurbished and inspected by our professional staff. (Fully functional) Technical data: - Tilting circular saw and spindle moulder 90-45° - Sliding table 2500 mm - Extension table with mitre fence 2600 mm - Rip fence with fine adjustment - Cutting width 800 mm - Spindle fence with multi-adjustment system - 4 spindle speeds - 3 motors, each 7.5 HP (5.5 kW) Bedpsy Hgxmofx Aknsww - Automatic star-delta start The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, spindle moulder, combination machine, combi machine, milling machine Reference: R-D1618

Condition: used, Year of construction: 2001, Bottom / right / left / top with Centro Fix cutter heads. Min/Max. working width (finished dimension): 23 - 180 mm Min/Max. working height (finished dimension): 6 - 105 mm Min. workpiece length: 300 mm Feed rate: 6 / 12 rpm Spindle speed: 6000 rpm Spindle diameter: 35 mm Motor power, horizontal spindles: 7.5 kW Motor power, vertical spindles: 5.5 kW Feed motor power: 1 kW Diameter of feed rollers: 120 mm Dust extraction nozzle, 1 piece: 150 mm Dust extraction nozzle, 2 pieces: 120 mm Bwjdoym D Eiopfx Aknow Weight: approx. 950 kg Location: Nattheim

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Concrete mixer with tilting drum. Bwodpez Evf Ujfx Aknew

Condition: new, Taylor 6/2.5m Clamp Carrier System For Solid Wood Edge / Face Laminating. A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating, the Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a pneumatic clamp tightener / loosener, pneumatic component flattener and air motor drive for rotation. On request the machine can be specified with a working width of 3.1m and also with 12 working sections. Bwodpfxjdy Dtre Aknjw 2.5m (8.5ft wide) 6 section frame. 36 x 302 type clamp arms with 90mm (3.5") high jaws and 1015mm (40") max. opening. (6 clamps per section). 1 x 80U type swing style pneumatic clamp tightener and component flattener with push button operation. 1 x 80AA pneumatic motor drive rotation. Front rest - manually operated. Pneumatic joy stick control for rotation / forward reverse. CE safety perimeter guards to sides / rear

Condition: excellent (used), Year of construction: 2022, Tilting Spindle Moulder Manufacturer: SCM Model: NOVA TI 105 Year of manufacture: 2022 Table size: 254 x 85 cm Power: 7 kW Tilting: Single-sided 45° Height adjustment: 120 mm Spindle diameter: 30 mm Height and angle adjustment: Electric Left/right rotation: Yes Speeds: 3500/6000/8000/10000 rpm Motor brake: Yes Including feeder Bsdpfx Akey Sg Nconoww

Condition: new, Spindle speed 9000rpm, Spindle motor 4kw, Cutter cycle motor 0.75kw, Maximum tenon width 100+2RMmm Maximum tenon thickness 30mm Maximum tenon depth (shoulder) 50mm Table tilt upwards 0-15 degrees Table tilt downward 0-30 degrees Table tilt side 0-20 degrees Table fence adjustable 90 to 45 degrees Pneumatic adjustable work place clamps x 2 PLC operation TCT disposable tip cutter block Overall dimensions 1300 x 1200 x 1600mm Weight 950kg Bwsdpfxjn Nwdls Aknow