Spindle moulders with tiltable spindle

MARTIN T23

Condition: used, Year of construction: 1978, spindle tilting: yes 0 - 45° Rcjdouzkxfepfx Apdoh height adjustment: manual tilting adjustment: manual fence adjustment: manual read out height : - read out tilting: Scala read out fence: Scala sawblade diameter: 30 mm speeds: 3000, 4500, 6000, 9000 motor power: 5 kW motor brake: yes, feed brake suction connection: 2 x 100mm machine length: 1200mm machine depth: 1400mm weight: 800kg

Condition: used, Year of construction: 1967, Center height: 300 mm Center width: 1000 mm Swing diameter: over bed 610 mm Spindle bore: 71 mm Spindle mount: size 8 Tailstock taper: 5 MK Rsdpfx Ajvzn E Sepdsch Spindle speeds: approx. 11.2 - 1800 rpm Feeds: longitudinal/transverse 0.014-16/0.063-7 mm/rev Thread pitches: 0.1 - 112 mm Electrical connection: 380 V, approx. 5.5 kW Space required: 2900 x 1450 x 1750 mm

Condition: used, Year of construction: 1980, Martin Spindle Moulder Model: Martin T 23 Year of manufacture: 1980 Spindle diameter: 30 mm Spindle stroke: 145 mm Max. tool diameter: 250 mm Pole-changing motor: 4.7/5.7 kW 2 speeds: 3000, 6000 rpm Table size: approx. 940 x 1100 mm Rsdpfxoy Rzyto Apdjch Table height: approx. 850 mm Automatic motor brake Emergency stop switch Weight: approx. 800 kg

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Rjdpfxoxc Rmqj Apdoch Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: used, mileage: 260,451 km, power: 141 kW (191.71 HP), first registration: 04/1980, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, Equipment: crane, Hello! We are pleased to welcome you. We are offering you the vehicle with the following equipment: Please be sure to leave us your telephone number in your message! Rodotpr Sgepfx Apdech * Crane truck/mobile crane * Year of manufacture 1980 * MKG crane works perfectly and everything is sealed * Support legs work and are also sealed * Tires still have approx. 60% tread * Engine and transmission also OK! * Crane height up to 30 meters!!! Our services: - Fresh TÜV+ASU - Delivery throughout Germany - Test drive possible at any time - Attractive financing conditions - Vehicle trade-in Opening hours also on Sundays by appointment We look forward to seeing you!

Condition: used, functionality: fully functional, machine/vehicle number: FN 4529291, Year of construction: 2013, operating hours: 4,034 h, load capacity: 4,500 kg, lifting height: 5,270 mm, fuel type: diesel, mast type: triplex, fork length: 1,500 mm, drive type: Diesel, Diesel forklift Rcedpfx Aowruqbepdjh Chassis number: FN 4529291 Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrostatic Condition: Refurbished, no warranty Technical condition: good Front tire type: Superelastic Front tire size: 300-15 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 225-15 Rear tire condition: 80 - 100% Description: includes new UVV inspection Side shifter, fork positioner 3rd valve, 4th valve, rear work light, heater, full cabin, full free lift Subject to prior sale

Condition: good (used), Year of construction: 1983, functionality: fully functional, max width of workpiece 180mm max height of workpiece 120mm 4 spindles: 1) horizontal bottom 180mm 3,7kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal top 180mm 5,5kW diameter of spindles 30mm Rcedpfx Apeqwg Anodjh

Condition: used, Weinig PFA 17 N (Unimat) automatic planing and moulding machine for four-sided planing and profiling of timber, fitted with a universal spindle. Technical data: - Spindles: 7 - Spindle 1: Bottom / 35 mm / 4 kW Rcsdpfx Aezrx Alepdsh - Spindle 2: Right / 35 mm / 3 kW - Spindle 3: Left / 35 mm / 5.5 kW - Spindle 4: Right / 35 mm / 7.5 kW - Spindle 5: Top / 35 mm / 5.5 kW - Spindle 6: Bottom / 35 mm / 4 kW - Spindle 7: Universal / 35 mm / 4 kW - Working width: 160 mm - Working height: 120 mm - Feed motor: 2.2 kW - Planing table length: 2,000 mm

Condition: used, functionality: unexamined, Year of construction: 2008, load capacity: 680 kg, lifting height: 9,930 mm, overall weight: 3,150 kg, Equipment: all wheel drive, All-terrain scissor lift platform with automatic self-leveling 3 units available. UPRIGHT Model: SL26SL Year of manufacture: 2008 Load capacity: 680 kg Platform dimensions: approx. 3.66 x 1.72 m Platform extension: approx. 80 cm Transport dimensions: approx. 3.79 x 2.13 x 2.6 m (Height with guardrails folded down: approx. 1.9 m) Weight: approx. 3,150 kg Working height: approx. 9.93 m Platform height: approx. 7.93 m Self-leveling inclination compensation The machine is operational but has not yet been further serviced or refurbished, either technically or visually. Therefore, it is offered here at a special preliminary price in its current condition. Shipping is not a problem. Rcjdpjxycyksfx Apdjh The machine’s location is 94244 Teisnach. (See photos for current condition) Viewing prior to purchase is expressly recommended; simply leave a telephone number by email and I will get back to you to arrange a viewing appointment. Subject to prior sale. All information provided without guarantee. Machines can be collected by the buyer or shipped by freight carrier at the buyer’s expense. Loading or packaging can be organized by us. The shipping costs are indicative; depending on distance and unloading facilities, actual costs may vary. Please inquire for details. The stated sale price is a net final price. An invoice with separately listed VAT will be provided. Warranty terms: Due to age and wear, the sale is exclusively to commercial buyers, without any warranty, guarantee, or return claims. All information is given without liability. By placing a bid, the buyer accepts these terms.

Condition: used, mileage: 1,001 km, first registration: 01/1989, color: green, driver cabin: other, gearing type: other, Year of construction: 1989, Vehicle location: Bovenden, with 4-point hydraulic outrigger system. Maximum crane capacity: 6,500 kg at an outreach of 3,250 mm. The crane is from a DAIMLER-BENZ SK 2628AK 6x6 with approximately 24,000 km on the odometer. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to change, prior sale, and errors! Rcedsi Rm Nujpfx Apdjh