Condition: used, Year of construction: 1995, Functionality: fully functional, machine/vehicle number: 2304, Sandblasting facility Bjbvewgi Udem Dp Uowl You are welcome to visit by appointment.

Condition: used, Year of construction: 2013, operating hours: 16,520 h, KMU LOFT vacuum evaporator for industrial wastewater treatment TYPE: Destimat LE400 Year of manufacture: 2013 Operating hours: 16,520 Condition: Completely overhauled: Motor, compressor Defect: Does not start automatically. Valve needs to be adjusted. Bwsbvm Djwgfgpep Uel No problems after startup.

Condition: good (used), Internal Article No.: 25012 Sandblasting Cabinet with Siemens Logo Control SIGG TR110 DK Year of Manufacture: 2010 Bebvm Dpewdvrks Uowl + Siemens Logo Control + Operating Instructions + Rotating Table D 540mm (controlled via foot pedal) Speed continuously adjustable. The table can also be swiveled using the lever on the left side. Arm with blasting nozzles can be swiveled (adjustable via control) Max. distance from blasting nozzles to table: approx. 275mm The sandblasting cabinet is in a well-maintained condition. A metal sheet is screwed to the outside and inside of the lower front area because the sheet had been blasted through due to the recurring movement of the swivel arm. This has been professionally repaired.

Condition: good (used), Ceetec IPT250 Touch robust automatic painting machine Tehnical data: Capacity: from 20 m/min. to 180 m/min, Workpiece dimensions: 10×10 mm to 250x250mm, Number of brushes: 8, Number of nozzles: 16, Electricity consumption: 16A, Bwebjwgbyrovm Dp Ujl Compressed air: Min. 6 bar, Electrical connection: 3x380V + PE + 0.32A, Inlet height: 844 mm (+-50 mm), Weight: 825 kg, Length x width x height: 2400x1100x1475 mm, Direction of throughput: Optional.

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: N/A, workpiece weight (max.): 2,000 kg, control cabinet height: 1,500 mm, control cabinet length: 500 mm, control cabinet width: 200 mm, cooling capacity: 1 kW (1.36 HP), input current: 100 A, workpiece diameter (max.): 3,000 mm, temperature: 65 °C, total height: 1,800 mm, total length: 3,200 mm, total width: 700 mm, type of input current: DC, waste water connection: 150 mm, compressed air connection: 10 bar, Equipment: crane, documentation/manual, Complete new line for alkaline zinc process. Very large baths, dimensions 3,2m x 1,8m and 80cm with. Designed to treat very large pieces as well as small metal pieces in a round barrel. Bebvmst U Ru So Dp Uewl Line is new, never installed. We are offering line with 18 baths, all necessary equipments for ait filtering, power supplies, semi automatic crane (can be upgraded on automatic) and electric control. We are offering instalation of line and future maintenance. Also We can supply with all chemicals.

Condition: new, Year of construction: 2025, INJECTOR Sandblasting Cabinets The Benefits and Applications of Injector Sandblasting Cabinets Injector sandblasting cabinets use an air-driven venturi system to create a vacuum that draws abrasive media into the airstream. The abrasive media is then propelled at high velocity from the blast nozzle, where it impacts the surface to be cleaned or prepared. Injector sandblasting is typically used for lighter applications. Bsbvmewf Dwwe Dp Ujwl Our SAPI injector sandblasting cabinets—including the Elk, Ram, and Buffalo models—use an air-driven vacuum system that draws the media to the front of the nozzle, where it meets the airstream and then "shoots" the mixture onto the workpiece. These cabinets are ideal for lighter applications and offer efficient and cost-effective solutions. ----- The Widder 70/100 injector sandblasting cabinet is a robust and reliable solution for demanding surface preparation requirements. Featuring a large work surface, a right-hand side door, and an efficient dust control system, this cabinet is designed for use with various types of abrasives and can accommodate small to medium-sized parts. It is ideal for industrial applications such as metal fabrication shops and workshops. ----- The Elch 100/130 injector sandblasting cabinet from SAPI is a compact and versatile solution for medium to large parts. Equipped with a large viewing window, two side doors, and an efficient filtration system, this cabinet allows for easy monitoring of the blasting process and ensures a clean and safe working environment. The Elch is designed for use with a wide variety of abrasives. Its user-friendly design and efficient blasting process make it an ideal choice for lighter applications in industries such as automotive, aerospace, and manufacturing. ----- The Büffel 140/180 injector sandblasting cabinet is a robust blasting machine designed for demanding applications. It features an air-driven venturi system that draws abrasive into the airstream and expels it at high speed from the blast nozzle. The Büffel cabinet is also available with an integrated filtration system that helps reduce dust and improve air quality during the sandblasting process. Loading heavy parts is also easily possible thanks to the front door using a forklift or crane. With its robust construction and efficient blasting performance, the Büffel 140/180 injector sandblasting cabinet is an ideal choice for industrial applications requiring high throughput and minimal downtime.

Condition: excellent (used), Year of construction: 2001, operating hours: 16,000 h, Functionality: fully functional, We offer continuous blasting equipment STEM PAP 15x6/4W1D Year of manufacture 2001. Equipment in very good condition, fully functional, possibility of testing in operation. Technical parameters: Blast chamber width - 1500 mm Blast chamber height - 600 mm Number of turbines - 4 Power of each turbine - 11 kW Turbine diameter - 360 mm Total machine height - 6700 mm Total machine length with roller tracks 30.1 m Inside the machine sweeping brush + blower fans Filter - automatic Filter capacity - 12000 m3/hour Filter capacity - 15 kW Number of filter cartridges - 16 pcs Operating pressure - 5-7 Bar Bobvowfz Sxem Dp Ujwl Total machine power including filter - 79 kW. Equipment in fully functional condition, in operation, possibility of testing

Condition: excellent (used), Functionality: fully functional, Set of 2 polishing machines and many accessories 1 x Buehler Metaserv polishing machine + various interchangeable pads + diamond pastes + many new polishing cloths Bebvm Deurb S Nsp Uewl 1 x Buehler Metaserv double polishing machine + 14 packs of Bühler sandpaper (approx. 50 pieces per pack) > 700 pieces of high-quality wet/dry sandpaper

Condition: new, fuel type: electric, tank capacity: 1,000 l, continuous power: 14 kW (19.03 HP), total length: 1,000 mm, total width: 1,000 mm, total height: 1,000 mm, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request. Fast delivery: Only 4 weeks after receipt of payment! ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ ➖➖➖➖➖ ⭐ Powder furnace with electric heating - MATOVENB-101010 ✔️ Internal dimensions: 1000 mm L * 1000 mm W * 1000 mm H ✔️ External dimensions: 1500 mm L * 1300 mm W * 1900 mm H ✔️ Electric heating output: 12 kW/h ✔️ Fan: 1,500 m3/h 80 mm SS ✔️ Recirculation fan output: 0.75 [kW/h] ✔️ Total 14 kW/h +- 10% ✔️ Digital heat control with continuously adjustable temperature up to 220°C ✔️ Sandwich panels: Interior: 1.2 mm galvanized steel, exterior: 1.2 mm powder-coated steel ✔️ Curing temperature, curing time, and exhaust fan function are adjustable ✔️ A beep sounds at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 150 mm (50 mm rock wool and 100 mm fiberglass) ✔️ Control panel: 1 🔥 MATOVENB-101010 – Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastics processing, or other thermal processes – the MATOVENB-101010 is your reliable solution for professional drying and curing processes up to 230°C! 🌡️ 🚚 Maximum loading flexibility • Use with a mobile workpiece trolley possible • Optionally with a loading rack system for small batches ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ Bwsbvmswfpp Ej Dp Usl ✅ Automatic shutdown after the end of the process ♨️ Ramp heating mode (optional) Precisely control the temperature profile and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events 🛡️ Safety is our priority 🟢 Safety sensor to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume extraction via automatic venting ⚡ Customized energy and heating system 🔌 Selectable heating systems: Gas, Diesel, Electric, or Hybrid (two combined heating modes) (optional) 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! Request now – Make your business fit for the future! ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️

Year of construction: 2013, Condition: as good as new (ex-display), Technical Details : - Sand Blasting + Liquid electrostatic painting line - Manufacturer - IKL AUSTRIA - Size of metal parts - max. 400x 2000 mm - Two Robots - Capacity - 400 bottles / day Bebjhtlw Rovm Dp Ujwl - Line consists . 1. Sand Blasting line 2. Electrostatic painnting line

Year of construction: 2006, Condition: excellent (used), Manufacturer: FORNAX AS Drying oven, curring oven chanel, chamber with fans. Working Temperature: 130 ° C. Year of manufacture: 2006 Size: Length: 6,2 m Bwebvm Dpofkvr Ho Ujl Width: 2,5 m 2 chamber, Open size: 90 x 190 cm Heating capacity: 110 kW 72 Heating elements

Condition: new, ROBOBlast: Automated Precision Sandblasting Experience the power of ROBOBlast, our state-of-the-art robotic sandblasting system designed for precise, efficient, and consistent surface preparation. Perfect for industrial applications requiring high performance with minimal human intervention. ROBOBlast: Robotic Sandblasting Solutions The ROBOBlast system offers a highly efficient and precise robotic sandblasting solution tailored to the needs of modern industry. Engineered for performance, it automates surface preparation, ensuring consistent results with minimal human intervention. This system is the ideal choice for companies looking to optimize their surface treatment processes. Precise and Efficient Surface Preparation ROBOBlast delivers consistent sandblasting performance on a variety of surface types and materials. Bwebvmjwf Dr Uj Dp Uol Automation enables greater accuracy and consistency, eliminating the variability that can accompany manual operations. Whether for small or large projects, ROBOBlast ensures high-quality surface preparation every time.

Condition: new, Year of construction: 2025, Functionality: fully functional, We offer a universal blasting machine with turbines, type - TSMZ 250-20 10/10 Table + hanging blasting equipment Table diameter - 1000 mm Table load - 250 kg Hanging diameter - 800 mm Hanging height - 1000 mm turbines - 2 pcs, diameter 250 mm Turbine power - 3 kW Each turbine is independently controlled Elevator power - 0.75 kW Filtration - manual shaking Filter power 1.5 kW, output - 1400 m3/hour Bsbvswfyulsm Dp Uswl Machine dimensions incl. filter - 3200 mm Machine depth - 1800 mm Total machine power - 9.5 kW CE certificate

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperature: 230 °C, heating capacity: 30 kW (40.79 HP), inner dimension width: 1,505 mm, inner dimension length: 2,500 mm, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - ✔️ Internal dimensions: 2500 mm L * 1505 mm W * 1800 mm H ✔️ Electric heating output: 30 kW/h ✔️ Fan: 3000 m3/h 80 mm SS ✔️ Circulation fan output: 1.5 kW/h ✔️ Total 35 kW/h +- 10% ✔️ Digital heat control, continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.5 mm galvanized steel, outside: 1.5 mm powder-coated Steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems (snap lock) Bwjbvm Dpswfgbro Uel ✔️ Insulation: 150 mm (150 mm rock wool) 🔥 PEF-2.5 Curing Oven: Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastic processing, or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optionally with insert shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: used, FSM-H04HT-R353, Showa Denki, electric blower Model: FSM-H04HT-R353 Condition: Used Bwsbvm Doq S S Hqsp Ujl

Condition: repair required (used), Year of construction: 1991, operating pressure: 8 bar, Large multi-station blasting system from Heinrich Schlick. Side loading via movable table. Table with turntable. Overall, very good condition. Everything works. The blasting material is not being fed in at the required rate. The screw in the blasting material conveyor needs to be replaced. See Figure 7. This can be done either by custom-making or by converting to a different manufacturer. Certainly not a problem for blasting system professionals. Bwjbjwffp Ijvm Dp Uol The system is available immediately.

Condition: used, Year of construction: 2009, Functionality: fully functional, test item - sale to check bank transfer Bebvm Dswffdlsp Ujwl

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Bwebowf Dpgovm Dp Uel Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: ready for operation (used), Year of construction: 2013, Model Smartline HB 12/16 Hanger Type Overhead Rail Loading 2 x hangers 1200mm max diameter of loading Bwsbewd Sn Uovm Dp Uel 1600mm max height 800 kgs max load 2 x blast wheels

Condition: as good as new (ex-display), Year of construction: 2023, HD washbasin - HD brush washbasin The washbasin has an adjustable 60 bar high pressure pump with which cleaning takes place in a closed work area. The cleaning takes place with an aqueous degreaser (10kg included in delivery) and at approx. 45 ° C. Viewing window including lighting Medium filtration through a candle filter Comfort operation by means of a foot switch including turntable Technical specifications: Working area: 1,200 x 700 mm Usable height: 400 mm Payload: 50 kg Operating pressure: adjustable up to max. 60 bar Pump output: 14 lt / min Washing temperature: adjustable up to max. 45 ° C Tank capacity: 170 lt Heating capacity: 4,000 W. Bjbshl If Njvm Dp Uowl Total output: 8.0 kW Voltage: 400 V ac 1 P + N + PE; Frequency: 50 Hz Machine weight: approx. 180 kg Overall dimensions with the lid open: 1,480 x 991 x 2,080 mm

Condition: used, Year of construction: 1991, Functionality: fully functional, Schlötter Galvanotechnik Anodizing line with 41 stations Model: PSF2510 Year of manufacture: 1991 Data: Power supply: 3x380 V, 50 Hz with loadable neutral conductor Compressed air: approx. 6 bar Heating medium: hot water 118/105 degrees Size: 41 stations Type of construction: 1-lane transfer system with loading and unloading station on one end side Goods window: 3000x900x300mm Maximum current consumption per goods carrier: 3000 Ampere Machinery and equipment: Anodizing line with 41 stations Control cabinet, modernization of the control system 2008 Cooling system for anodizing baths, modernization 2010 Rectifier for anodizing baths Compressor for air injection into rinsing baths AVA, waste water pretreatment plant, modernization Dec 2019 Fresh water treatment plant, new construction Dec 2019 Bobvelc Evwom Dp Uewl

Condition: new, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4 weeks after receipt of payment! ✅✅✅Energy class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - MATOVENB-101610 ✔️ Internal dimensions: 1000 mm L * 1000 mm W * 1600 mm H ✔️ Electric heating capacity: 18 kW/h ✔️ Fan: 1,500 m3/h 80 mm SS ✔️ Recirculation fan capacity: 0.75 [kW/h] ✔️ Total 45 kW/h +- 10% ✔️ Digital heat control: Continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.2 mm galvanized steel Exterior: 1.2 mm powder-coated steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 150 mm (50 mm rock wool and 100 mm fiberglass) 🔥 MATOVENB-101610 – Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastics processing, or other thermal processes – the MATOVENB-101610 is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optionally with insert shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority Bwjbvm Dpewd Nwaj Usl 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️

Condition: excellent (used), Nabertherm N450 ceramic firing kiln, maximum temperature 1280 degrees C. German-made kiln. The kiln is equipped with a very intuitive controller with 6 programs. New spirals have been installed in the kiln, which guarantee the achievement of maximum temperature. Chamber with a capacity of 450 liters. Chamber dimensions: Height 100 cm Width 60 cm Depth 75 cm External dimensions Height 182 cm Bjbvm Dpswdzt Hj Uowl Width 103 cm Depth 145 cm Power supply 400 V Power 24 kW Maximum temperature 1280 degrees C Kiln in very good condition.

Condition: new, Year of construction: 2025, Mobile Paint Container Take your painting process to the next level with mobile convenience. Mobile paint booths in a container design for painting and coating various objects. Bwebvm Dpswf Dmxe Usl They are specifically designed for mobility, making them easy to transport and set up on different construction sites. The booth is typically equipped with a ventilation system to ensure air quality, lighting, and a filtration system to prevent paint overspray. The ventilation system ensures that fumes and particles released during painting are contained within the booth, preventing any danger to the surrounding area. Mobile paint booths are a practical and flexible solution for companies that need a portable and effective painting system that can be transported from one construction site to another. Design and Features Overview Our mobile 20-foot Sapi paint containers consist of a robust steel frame with welded wall and ceiling panels. We can add special equipment such as cranes or lifting devices inside. The floor is made of teardrop plate. Both door panels contain ventilation grilles fitted with fine-pored filter mats. One panel is designed as an emergency exit for safety reasons and features a viewing window. It's also worth mentioning that these aren't simply converted shipping containers! We manufacture all of our containers from scratch. We use only the most robust materials that meet our requirements and have also been safety-tested and proven. Conventional shipping containers would not meet the required safety standards. Paint extraction system in the mobile painting container The paint mist extraction panel for paint mist separation is located in front of the rear wall and is equipped with multi-layer filter mats. The extraction panel consists of a galvanized housing, folded with guide plates, including various suspension and fastening elements for the filter assembly. The powerful, explosion-proof extraction fan with drive motor is installed on a console in the rear wall area on the outside of the container. Next-generation mobile paint booths: Meeting EU requirements and advancing coating solutions The new generation of mobile paint booths must meet the highest EU requirements. The inclusion of new coating systems such as hydro-based paints, polyurethane resins, epoxy zinc dust, or epoxy iron mica paints places high demands on existing paint booths. Therefore, we have developed a new and unique mobile paint booth for the next generation of coating solutions. A key criterion is the transport of workpieces for painting and further processing steps. Whether it is dry paint mist separation or wet washing, air humidification or air drying, condensation drying using low-temperature processes or warm air drying, or whether workpiece pretreatment is carried out using high-pressure washing with water in a recirculating system, compressed air blasting, or wheel blasting technology.

Condition: new, Year of construction: 2025, Functionality: fully functional, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Price includes shipping within Germany – No additional shipping costs! ✈️ Fast delivery: Only 4 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN SO EASY! Want to expand your business and enter the world of professional powder coating? Mini-PB-MAT is the perfect solution for beginners! This powerful system enables efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨THE UNBEATABLE OFFER – ONLY UNTIL THE END OF APRIL!✨ Instead of €25,500, now only €16,765 PLUS VAT. Take advantage of this limited-time offer before it's too late! * With an additional shipping fee of €750, we can ship throughout Europe. For other countries worldwide, please inquire about the shipping price difference. * Brand new, professional industrial product PROTON QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use! ✅ 100% European manufacturing – Not made from Chinese goods, but the highest quality according to European standards! ✅ Modular & expandable – Additional options for more performance and flexibility! ✅ All spare parts included – Long-term use with no hidden additional costs! ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ✳️ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ Powder furnace + powder booth + powder gun Complete starter kit - MiniPB-MAT ⭐ Powder furnace with electric heating ✔️ Internal dimensions: 1000 mm L * 1000 mm W * 1000 mm H ✔️ Electric heating output: 12 kW/h ✔️ Fan: 1,500 m3/h 80 mm SS ✔️ Recirculation fan output: 0.75 [kW/h] ✔️ Total 14 kW/h +- %10 ✔️ Digital heat control with continuously adjustable temperature up to 220°C ✔️ Sandwich panels: Interior: 1.2 mm galvanized steel, exterior: 1.2 mm powder-coated steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ A beep sounds at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 150 mm (50 mm rock wool and 100 mm fiberglass) ✔️ Control panel: 1 ⭐ Powder booth ✔️ Interior dimensions: 1200 mm L * 1200 mm W * 1450 mm - 2220 mm H ✔️ 1 polyester filter ✔️ Filter dimensions: 325 x 725 mm. ✔️ Automatic filter cleaning system (adjustable cleaning time) ✔️ Powder recovery container: 30 liters ✔️ 360-degree rotating and movable suspension system ✔️ 1 x 1.5 kW extraction fan - 2500 m3/h ✔️ Control panel: 1 ✔️ Lighting Bjbvm Dpev Rb E Ds Uewl ⭐ Powder coating gun - STRONG ELITE MULTICOLOR Effortlessly coat with all powder colors, coat complex geometries with outstanding efficiency and quality, and do so in the most challenging environments. Inquire now - Prepare your business for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certifications for all our machines and ATEX certifications for the necessary machines.☀️ Options (for ovens, spray booths) are available for an additional charge. All equipment/machines are new and unused.