Paint/spray booth

Reinox 160x235

Condition: new, Equipment: lighting, Take your painting process to a new level - with mobile convenience. Mobile paint booths in container design for painting and coating various objects. They are specially designed for mobility so that they can be easily transported and set up on different construction sites. The booth is usually equipped with a ventilation system to ensure air quality, lighting and a filter system that prevents paint mist from escaping. The ventilation system ensures that the vapors and particles released during painting are kept inside the booth so that there is no danger to the environment. Mobile paint booths are a practical and flexible solution for companies that need an effective painting system that can be moved from one construction site to another at any time. Overview of the design and functions Dujdeun Shgspfx Afnsl Our mobile 20-foot Sapi painting containers consist of a robust steel frame with welded wall and ceiling panels. Inside, we can add special equipment such as cranes or lifting devices. The floor is made of tear plate. There are ventilation grilles in both door leaves, which are fitted with fine-pored filter mats. One leaf is designed as an escape door for safety reasons and has a viewing window. It should also be mentioned that these are not simply converted shipping containers! We manufacture all our containers from scratch ourselves. We only use the most stable materials that meet the requirements and have also been tested and proven in terms of safety. Normal shipping containers would not meet the required safety standards. Paint extraction system in the mobile painting container The paint mist extraction wall for paint mist separation is located in front of the rear wall and is equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, edged with baffle plates including various suspension and fastening elements for the filter equipment. The powerful and EX-protected extraction fan with drive motor is installed on a console in the rear wall area on the outside of the container. Next-generation mobile spray booths: meeting EU requirements and advancing coating solutions The new generation of mobile spray booths must meet the highest EU requirements. The consideration of new paint systems such as hydro paints, polyurethane resins, epoxy-zinc dust or epoxy-iron-mica paints places high demands on existing paint booths. That is why we have developed a new and unique mobile paint booth for the next generation of coating solutions. An important criterion is the transportation of the workpieces for painting and for further processing steps. Do you need more information? Our engineers can offer expert advice and support. Whether paint mist dry separation or wet scrubbing, air humidification or air drying, condensation drying in a low-temperature process or hot air drying, whether pre-treatment of the workpieces by high-pressure washing with water flow in a circulation system or by compressed air blasting or wheel blasting technology.

Condition: used, Year of construction: 2022, sheet width:1550 mm plate thickness:4 mm pre-bending:6 total power requirement:2,2 kVA weight of the machine ca.:1,42 t Dusdpfx Afst Hmlqjnol dimensions of the machine ca.:2,7 x 0,75 x 1 m roll feed:3,5 m/min Motorised blade roller 3 rolls Material width 1550 mm Material thickness max. 4 mm Shaft diameter 140 mm Roll feed 3,5 m/min

Year of construction: 1992, condition: good (used), 21 rolls, Ø 80 mm strip width: 500 - 1.650 mm Dujdog Iirnjpfx Afnjl strip thickness: 1 - 5 mm

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Full analysis with the stationary spark spectrometer SpectroMaxX: With the help of the spark spectrometer, the alloy contents and accompanying elements of macroscopic solid samples can be can be determined with high precision down to the ppm range. Different analysis methods are available for the base materials iron, aluminum, magnesium, copper, nickel, titanium and lead, measuring methods adapted to the relevant alloy families are available. Advantages: Fast analysis within a few seconds Highly accurate spectral analysis including C and N Compact design (table-top device) Areas of use / application: Testing the chemical composition of 31 ferrous and non-ferrous metals Composition of 31 ferrous and non-ferrous metals metals, nitrogen and other elements Description of the system: Open spark stand for high sample throughput Wide range of sample geometries possible Simple change of base The following elements are available as a base: Al, Cu, Fe, Mg, Ni, Ti, Pb The analyzable elements and concentration levels depend on the methods available for the respective base element Usable wavelength range 170-670 nm Output of measured values in concentrations or intensities Selectable output units (%, ppm) Output of statistical characteristic values (mean value, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range is wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized to customer requirements Expansion with additional modules possible on site Spark stand: Open spark stand for high samples Throughput and various sample geometries Minimized argon consumption thanks to argon saving module Optimized argon flow Reduced cleaning intervals Spark stand plate can be easily replaced Temperature-absorbing design without water cooling Integrated shutter system for optimum plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation and digital offline pulse control 32 MHz microcontroller Max. Spark duration: 4000 µs Max. Spark power 4 kW Display system: Separate microcontroller for each CCD Serial source interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic verification and identification of alloy/quality Results Manager Online maintenance scheduler Ambient conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity: Dujdou S Ahqjpfx Afnol

Condition: excellent (used), Here we offer Polychromix Phazir NIR spectrometer. Portable Near Infrared Analyzer Model: 1624 Specifications Spectral range: 1600-2400 nm. Dujdpfsn Arm Tsx Afnel Pixel pitch 8nm Optical resolution 11nm Scattered light

Condition: used, Coating system Hymmen CombiCoater ELX-S 1400 with UV dryer. * Technical data will follow shortly * For self-dismantling and collection. Dedpfx Aolf H Tcofnjul

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: S36-0685, (engraving, cutting) With Rip and extraction system (S. No.: 01422-11122) Laser type: CO2 Dujdpfx Ajxcalvofnol Working area (W x D): 813 x 508 mm CO2 laser power: 80W, 120W Max. engraving speed: 3.55 m/s Operating mode: Optimized modes, including raster, vector and combined

Year of construction: 2011, condition: excellent (used), IWN Crusader Crate / Utensil / Tunnel Washer Dedpfxsgqutcs Afneul Year 2011 All Stainless steel Power wash and rinse system with digital adjustable temperature controller Chemical dosing facility for wash and rinse system Gas fired burner with reset facility Complete with extractor fan and ducting In excellent working condition, ready for use.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 🚨 FOR SALE: 2x Kardex XP500 Machines – Top Condition! 🚨 For sale for removal. We are building a new warehouse and do not require these units. In good condition, recently serviced, well maintained throughout the time we have owned them. Duodpevuvbzofx Afnol Price is per unit, negotiable. Shelves can be easily reconfigured to accommodate different product types / sizes. Bins can be sold with machines if desired. Machines are currently configured for dual tray presentation. Also includes 10-bay Kardex SortBench. Details: Model: Kardex XP500 Quantity Available: 2 units Condition: Well-maintained and fully operational Key Features: High-density storage to maximize space utilization Fast and reliable picking system for enhanced productivity Built for heavy-duty industrial applications Ergonomic design to improve workplace safety Energy-efficient operation Why Kardex XP500? These machines are perfect for businesses looking to improve efficiency, save floor space, and boost order-picking accuracy. Location: The units are currently stored in Wanganui, New Zealand.

Year of construction: 2013, condition: ready for operation (used), Connected load: 4kW, weight: 1t. Dsdshlp Efepfx Afneul