Used other surface finishing machines for sale (59)

Condition: used, Gietart Roller conveyor shotblasting machine Type: Roller conveyor Iisdpfx Akjidlq Soxsa Max. width of workpiece: 1500 mm Max. height of workpiece: 550 mm Max. workpiece weight: 600-800 kg/m

Year of construction: 2026, condition: used, TEXTILE FABRIC STENTER – MONTFORTS MONTEX 12 G/K For sale: Montforts Montex 12 G/K textile fabric stenter line, well-equipped and suitable for drying, finishing, coating, and fabric straightening applications. Machine details Ijdpjy A S Thefx Akxeia Make: Montforts Model: Montex 12 G/K Year of manufacture: 1986 Major overhaul: 2004, including replacement with economical type burners Refurbished: 2008, then preserved Working width: 220 cm Drying chambers: 6 Heating: Liquid gas and natural gas Fabric conveying system: Horizontal chain, pin and clip Accessories and additional equipment Küsters foulard Isotex coating unit, model SR Mahlo straightener, model RFMC-74 AN Selvage cutting units 2 cooling cylinders Chemical station with tanks: 1300 L, 1100 L, 2 x 500 L All tanks fitted with mixers Heat recovery system installed above the drying compartments

Condition: like new (used), Year of construction: 2022, operating hours: 11 h, functionality: fully functional, machine/vehicle number: 181070, Scope of supply for the overhead rail blast machine Blasting cabin: 100% manganese Transport system Y-rail: included Abrasive recovery hopper: included Automatic abrasive cleaning: included Automatic abrasive quantity control: included HMI: Siemens TP7 Remote access (via VPN): included Characteristics of the installed turbines Number: 2 units Drive power per turbine: 11.0 kW Speed control: included System characteristics Blasting tasks: surface finishing including cleaning, roughening, peening, derusting, descaling Workpiece designation: Various steel parts Coverage (%): depending on component Capacity (parts/hour): individual Abrasive (material and size): aluminum and aluminum-zinc abrasive or steel abrasive in various sizes possible Abrasive quantity (initial fill): approx. 1000 kg Workpiece material: steel Hook load: max. 450 kg Workpiece temperature: max. 80° C Workpiece height: 1300 mm Iisdpfxsy Avh No Akxja Part diameter (min/max): 1100 mm Sound pressure level without soundproofing: approx. 85 - 90 dB(A) Optional offers: Dry filter including secondary filter EUR 18,880.00 Pipework 5m EUR 1,980.00 Technical data of the filter system: Type: dry filter Air flow capacity: 2,600 m³/h Filter surface area: 36 m² Residual dust concentration: ≤ 2.0 mg/Nm³ Residual dust concentration with after-filter: ≤ 1.0 mg/Nm³ Supervision and installation starting from EUR 3,500.00 The system is delivered in CE-compliant design. Exempted are linked systems or systems where essential components are added or modified by the customer. In such cases, AGTOS provides an installation declaration. Upon request, we are happy to send you a layout plan.

Year of construction: 2026, condition: new, functionality: fully functional, The universal LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be created with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. The LAS 28 XLe laser model can optionally be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as lateral cantilevers for marking long parts, movable Z-axis, drawer systems, etc., can also be implemented. Programmable, software-controlled axes (X-, Y-, Z-axis) and database connection are also possible. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus system - system for automatically determining the focus distance - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system Iedpfowkpvvox Akxoia - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 120 Kg

Year of construction: 2026, condition: new, functionality: fully functional, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm Iedpfov Sybysx Akxjia - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Year of construction: 1999, condition: good (used), functionality: limited functionality, !!! Important!!! The systems have now been dismantled. The system components are available for inspection. Offered here are two functional SLC (Surface-like Chrome) vacuum coating systems/evaporation systems from PVT GmbH. The third, non-functional system is no longer for sale. The system documentation is available in paper form and will be provided upon purchase. To operate the systems, a compressed air supply, power supply, and water cooling are required, which must be provided by the buyer. All other PVT processes are, of course, also possible. The system was primarily used to treat wheel rims. Other workpieces made of aluminum, steel, or plastic are also possible, such as bathroom/kitchen fixtures, motorcycle and car components, door and window handles, etc. Iisdpfxeyzdm Re Akxsa What is the advantage of the SLC process compared to chrome plating: - SLC coating is a high-gloss coating that is visually comparable to a galvanic chrome coating. The SLC coating is a high-gloss coating that is visually comparable to a galvanic chrome coating. - Significantly less susceptible to scratches and chipping - The process is more environmentally friendly and offers outstanding corrosion resistance - Costs are significantly lower Technical data: Chamber dimensions: approx. 1600 mm diameter and approx. 900 mm height Type: PVT 1600 SLC Manufacturer: PVT GmbH Year of manufacture: 1998/1999 Documentation: Available Control system: Allen Bradley PLC (automatic coating process including hardware)

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, control type: manual, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: ABB, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, High Pressure Unit 90PW3 for Sale Model: 90PW3 (explosion-proof motor) Manufacturer: Power (Tianjin) Technology Co. Key Technical Specifications - Maximum pressure: 140 MPa (extendable to 276 MPa by changing the hydraulic head) - Rated flow: 30 L/min - Rated power: 90 kW - Transmission ratio: 2.75:1 - Rated speed: 530 RPM - Plunger diameter: 18 mm - Dimensions: 2000 × 1200 × 800 mm - Weight: 1200 kg Main Components Included - 90PW3 high-pressure triplex pump - Explosion-proof motor - Flexible pin coupling - Booster centrifugal pump (feed) - Bag filter + Y-strainer - Pneumatic valve (automatic opening at 55 MPa) - Control panel with indicators - ABB soft starter Iedpfx Aksyxy D Tsxeia - Water storage tank with level control (IFM sensor), PLC-controllable pneumatic intake valves Technical Advantages - Forced lubrication – prevents overheating due to friction - "Super simple" maintenance: quick removal of packing and valves

Year of construction: 2026, condition: new, functionality: fully functional, The drum-type belt blast machine is specially designed for cleaning and derusting bulk materials. It operates reliably and is easy to use. Thanks to its robust construction and high-performance turbine, the system is ideal for daily use in production environments. Technical specifications: Capacity: 180 liters Turbine: 1 pc. Turbine 3.6.10 Turbine power: 11.0 kW Turbine control: frequency controlled Ijdpfx Akjyxpvlsxeia Workpiece data: - Max. space diagonal: 270 mm - Max. workpiece weight: 25 kg Belt: perforation Ø 8 mm Abrasive: - Suitable for round abrasive media - Automatic refill silo: 100 liters - Integrated abrasive flow regulation Extraction & noise: - Sound pressure level without sound insulation ≤ 85 dB(A) - Filter unit can be positioned left or right Year of manufacture: approx. week 31/2026 Features: - Wear-resistant manganese lining in direct and indirect blasting zones - Turbine housing lined with tool steel - Turbine blades made of high-strength tool steel - Turbine feed channel also made of tool steel - Abrasive collection chute beneath the machine for optimized media return Options: - Customized paint finish - Flexible filter positioning (left/right) - Loading solutions available upon request

Year of construction: 2000, condition: good (used), used drum shot blast machine Brand: OMSG Ijdjmza S Ejpfx Akxoia Type: ROTOFLOW Model: 170-N Year 2000 Registration: 10371/00 Continuous belt shot blasting machine for sandblasting/shot blasting aluminum injection, brass or steel forgings, screws and bolts. Automatic feeding tower. Max unit weight of the piece: 8kg Turbines: 2 x 11kw Turbine diameter: 350mm inverter turbines Special two position valves Filter CURRENT STATUS: Disassembled and stored in our facilities.

Year of construction: 1995, condition: excellent (used), functionality: fully functional, EMO standard cleaning systems Isdpfx Akoywcrkexoia

Condition: not inspected (used), functionality: unexamined, overall weight: 15 kg, total length: 400 mm, total width: 250 mm, total height: 230 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection between 04.05.26 and 07.05.26. Iiodpfx Akeyr I Tnoxsa MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 400 x 250 x 230 mm Weight: 15 kg External reference: 56

Year of construction: 2026, condition: new, We manufacture blowers for air supply to factory halls, barns, or any location requiring substantial air exchange. The air intake can be fitted with one or two pipes, and an adjustable air inlet can also be installed. Air inlets are available with adjustment options or with flange outlets. The air outlet comes with a flange for connecting pipes that transport air either from or into a room. Upon request, we can produce custom inlet or outlet ends. We can also manufacture blowers without smooth, electronic motor speed control. Entire unit is hot-dip galvanized. Motor: 5.5 kW (7.5 kW available upon request), 2800 rpm. Fabrication of steel bends and pipes is also possible. Iiodpewt Ihcsfx Akxsa Equipped with an electronic motor speed controller. Shipping or pickup in Poznań. Net price. Price may be subject to change. We also produce pneumatic dispensers for dispersed concrete reinforcement, pneumatic grain conveyors, joint cord inserters, joint cleaning machines, and several types of milling machines for joint chamfering, as well as trowels and concrete discs.

Year of construction: 2012, condition: like new (used), functionality: fully functional, Rösler RSKI 1400-SAT – Satellite Indexing Blast Cabinet, Automatic, 2 Nozzles For sale is a near-mint Rösler injector blast cabinet, model RSKI 1400-SAT. This system is designed for the automatic blasting of small and medium batch series, making it ideal for components up to approximately 280 mm in diameter. Parts are evenly blasted via a rotating satellite table—ideal for cleaning, deburring, descaling, derusting, or roughening precision components. Once raw parts are loaded, the blasting time per satellite can be set at the control panel. After confirming raw part loading using the button directly next to the cabin door, the individual satellites index into position and are processed. Upon completion of the blasting cycle and after all parts have been treated, a finished message is displayed and the system can be reloaded and unloaded as needed. Thanks to the generously dimensioned integrated filtration technology, the blasting machine is suitable for virtually all types of blasting media, including finer mineral abrasives without issue. Originally used in medical technology, the interior of the system is lined with rubber. This presents no disadvantages for other industries or users; indeed, it provides additional wear protection for both media and machine and dampens noise. This means the unit operates both more efficiently and more quietly than an unlined cabin. By removing the front manual access cover, manual blasting can also be performed at any time with minimal setup effort. Additional nozzles can be retrofitted if required. Key technical data (excerpt): - Manufacturer: Rösler Oberflächentechnik GmbH - Model: RSKI 1400-SAT Satellite Blast Cabinet - Year of manufacture: 2012 - Blast system: Injector blasting with 2 boron carbide nozzles SPI 38 - Satellite rotary table with six workpiece holders - Power connection: 400 V, 3Ph/N/PE, 50 Hz - Connected load: 4.0 kW - Main drive: 0.75 kW Iiodoyudhaspfx Akxea - Control voltage: 24 V DC - Separate control cabinet, operation via buttons/switches and foot pedal Your advantages at a glance: - Automatic satellite blast cabinet for series and precision components - Originally equipped for use in medical technology - Uniform all-round processing of parts without direct component contact - Two blast nozzles for excellent surface coverage and reduced processing times, with optional expansion - Large front door and viewing window for convenient loading and optimal process monitoring - Compact, rugged construction—easily integrated into existing production environments

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Ijdpfxoqfcvio Akxjia Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: excellent (used), functionality: fully functional, Klöckner Ionon GmbH is a company specializing in plasma nitriding and coating technologies. The model designation S800/7000 refers to a specific plasma nitriding system (vacuum furnace) used for the surface hardening of steel components. Plasmanitriding Technology Dr. Böhm GmbH +2. Here are the typical technical features and applications for systems of this size: Technical Features (S-Series): Process: Plasma nitriding, plasma nitrocarburizing (to increase wear and corrosion resistance). System Type: Vertical or horizontal reactor (vacuum furnace). Dimensions (S800): The designation "800" generally refers to the usable chamber diameter (approx. 800 mm), while "7000" may refer to the system series or a specific height/volume. Functions: Precise control of the compound layer, suitable as pretreatment for PVD coatings. Ijdsytl Hhopfx Akxjia

Condition: new, Year of construction: 2026, functionality: fully functional, air demand: 1.13 m³/h, pressure: 7 bar, warranty duration: 24 months, total width: 1,370 mm, total height: 2,080 mm, total length: 1,150 mm, overall weight: 350 kg, Equipment: cabin, lighting, The Vapormatt PUMA is a high-quality and versatile manual wet blasting cabinet from Vapormatt, the leading company in the wet blasting segment and the inventor of this technology in the 1950s. With over 70 years of continuous development in wet blasting, the Vapormatt PUMA has evolved into an ergonomically optimized and efficient machine. A removable basket allows for processing of small batch parts, while a clamping device enables simple handling of rims or wheels. Large workpieces weighing up to 125 kg can be placed on the robust stainless steel grate. An optional stainless steel rotary table is available for easy handling of heavy items. The integrated recirculating water system with cascade tanks, filtration unit, and return pump ensures economical use of water and consumables. Wet blasting is gentler and more consistent than, for example, sandblasting, thanks to water as the carrier medium. With this technology, you can achieve smooth and uniform finishes on your parts. Technical data: - Internal dimensions: 1100 x 1100 x 1200 mm (L x W x H) - External dimensions: 1400 x 1200 x 2100 mm (L x W x H) - Pump power: 2.2 kW (400 V / 50 Hz) - Sump volume: approx. 142 L water / approx. 15-40 kg blasting media - Load capacity of work surface: 125 kg Iodoyq Ri Ajpfx Akxoia All prices are net, plus the currently applicable statutory VAT and shipping costs. Some images may show the unit with accessories which are optionally available and subject to additional costs. If you are interested, we look forward to hearing from you. We provide professional and non-binding advice. The European Commission provides a platform for online dispute resolution (ODR). This offer serves exclusively as an online presentation of our products. Contract negotiations are conducted via telecommunications (e-mail, phone, messaging portal). In the first step, we provide you with a non-binding quotation and inform you about our general terms and conditions, legal notice, and your right of withdrawal before any purchase/contract is concluded.

Year of construction: 2007, condition: like new (used), functionality: fully functional, Tape Machine Manufacturer: Ruscher Model: RU-FE Year: 2007 Information Tape-applying machine with roller conveyors, total length 11 meters. Suitable for facade profiles and many other types of profiles that need to be coated with protective film tape. Dimensions Length: 11,000 mm Width: 800 mm Iiedpjxyyc Aofx Akxoa Height: 1,400 mm Seller’s Comments Fully functional Used in a production line for aluminum profiles Can be separated for transport

Condition: used, Technical details: machine weight approx.: auf Anfrage kg Isdpfou N Awvjx Akxsia dimension machine xH: auf Anfrage m Surface measuring and recording device SP6 2x feeding device PRK 6720702 1x measuring stand PST-Ue ( transverse = 165mm and vertical adjustment = 440mm) table size 650 x 450mm 1x measuring stand PST-Ve (vertical adjustment 450mm, motorized) + manual control unit; table size 650 x 178mm Perthometer S6P Without base cabinet, without the granite plate shown in the picture. Can be offered separately. i.D. *

Year of construction: 2023, condition: like new (used), functionality: fully functional, machine/vehicle number: 018-2310-0001, Sono TEK ultrasonic spray coating system with conveyor belt or workpiece carriage - 6-head spray system - Was set up for anti-fingerprint / hydrophobic spray coating for display glass, but has seen little use as product launch was postponed - Conveyor approx. 2 m - Flexible gantry design, allowing spray width to be easily and precisely adjusted Ijdpjyl Rr Hefx Akxoia - Siemens Simatic touch panel - Commissioning / installation support can be provided - Documentation available System is dismantled and ready for transport.

Condition: new, Year of construction: 2016, functionality: fully functional, total height: 830 mm, total width: 800 mm, total length: 1,820 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Drive pinion: 10 teeth Chain sprocket: 10 teeth Isdpeyf Aypsfx Akxjia Carrier width: 30 mm Chain link length: 130 mm MACHINE DETAILS Dimensions (L x W x H): 1,820 x 800 x 830 mm EQUIPMENT 2 pcs drive unit 1,600 x 360 x 520 mm 5 pcs spare chains (4 pcs packed)

Condition: good (used), Year of construction: 1991, Total output: 22 kW Operating voltage: 380 V AC Operating current: 46 A Ijdpfxsydlide Akxsia Frequency: 50 Hz Pneumatic pressure: 4 bar Water pressure: min. 3.5 bar

Condition: good (used), Year of construction: 2015, workpiece weight (max.): 40 kg, CABO Mixspace Multispeed Paint Mixer Gyroscopic Mixer (gyromixer) Year of manufacture: 2015 Display Alphanumeric 20 x 4 Maximum bucket weight 40 kg Bucket holder tray Pull-out Bucket gripper Automatic Gyroscopic ratio 1:1.8 Speed ​​settings 3 programmable Mixing speed 80 - 180 rpm Acceleration / deceleration during the mixing cycle Automatic speed adjustment to the bucket height Mixing cycle time 20sec - 30m Maximum bucket diameter 380 mm Bucket height: min - max 90 - 490 mm Bucket height 340 (+30) mm Bucket types Round/Square/Oval Mains voltage: 230v 50Hz 3A Machine weight 190 kg machine dimensions: Iisdpfxovmtw Rs Akxoa width:860mm length:850mm height:1150mm

Year of construction: 2026, condition: new, 🏭 POWDER COATING BOOTH KPZ-3 Automatic filter cleaning with adjustable pulse timing, plus manual mode. 🧼⏱️🖲️ 100% polyester filters - washable, water-resistant, long-lasting. 🧵💧♻️ ROMER JET™ filter cleaning - patented high-speed air pulse for powerful cleaning. 💥💨🏅 Iiedpjfzkzhsfx Akxja Low-noise aluminium fans (74-79 dB) - safer, spark-minimized operation with low power use. 🔇⚡🛡️ Adjustable airflow baffle - antistatic plate protects filters and improves extraction. 🌬️🛡️📈 Leak-tight filter mounting - gasket + clamp for strong sealing and easy service. 🔩🧷✅ Touchscreen control - auto (time), auto (clogging sensor), manual + filter change alerts. 📲🔁⚠️ Optional powder container - waste collection or fluidized tank with direct applicator feed. 🧺💨🎯 Overhead puller - moves beams through the booth, reducing manual effort. 🏗️➡️💪 Integrated sieving unit (with container) - clean recovered powder for reuse, EX-zone vibrator. 🧪♻️⚙️ Explosion-proof design - components selected to prevent explosive mixtures. 🛡️💥✅

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, Raptor Hypersonic Spray Applicator The spray applicator is used to fill surface shrinkage/damage in different materials, for example, it is perfect for the regeneration of aluminum rims. With this technology we can fill the gaps without heating the sputtered element. The surface after sputtering is suitable for grinding or turning and has no internal pores, which means that no craters form on the surface of the element after processing. Iisdpfovx Ht Nex Akxoa Specification: Air pressure: 6 - 7 bar Minimum air consumption: 0.5 m³/min Power supply: 230 V Power consumption: 3300 W Tank capacity: 200 grams Weight: 8.5 kg Rim repair sprayer, surface filler, metal cavity filler, aluminum cavity filler, damage filler, rim repair, rim refurbishment, rim doctor, rim clinic, curb damage, FELGENMASTER, rim technology, rim broken, pothole and damage, corrosion damage, corrosion,

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, total length: 2,500 mm, suction capacity: 7,200 m³/h, intake manifold diameter: 500 mm, Placing a bid obligates you to collect the item within the specified period until 27/02/2026! MACHINE DETAILS Voltage: 230 V EQUIPMENT - Robust construction - Easy and hassle-free spindle head change - Pneumatic two-hand operation - 6-spindle drilling head - Useful special accessories for extended processing options TECHNICAL DETAILS Exhaust duct diameter: 500 mm Extraction capacity: 7,200 m³/h MACHINE DETAILS Noise level: approx. 78 dB(A) Motor power: 1.5 kW ex External dimensions (L x W x H): 2,500 x 2,000 x 750 mm Height with fan: 2,700 mm EQUIPMENT - Housing made from galvanized sheet steel - Soundproofing with perforated pre-panel - Folding carton filter with fiberglass filter at the second filter stage - Front panel with high-performance filters - Wall duct NW 500 L = 500 mm round sheet metal plate - Wall outlet 45° with grid Isdpfx Aoyfnqtjkxeia - Push-fit connector for hose or pipe NW 500