Used sheet metal deburring machines for sale (96)

Condition: ready for operation (used), Year of construction: 2000, General Data Machine weight 2300 kg Measurements height 2240 mm Dimensions Machine Length 2070 mm Nedpfxoxy Thfj Adhswp Technical Specification Working Width 1300 mm This Fladder 300 Gyro was manufactured in 2000. It features a working width of 1300 mm, six brush heads, and a rotating and oscillating sanding unit. Equipped with two vacuum fans and a vacuum conveyor belt, it ensures efficient material handling. The motor power is 7.5 kW, and it offers an infinitely variable feed speed of 2 - 8 m/min. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery

Condition: used, Year of construction: 2017, controller model: , _____ Description: Year of manuf. : 2017 Material thickness : 100 mm Material size : 1350 mm Working area Maximum clear passage width:1350 mm Sheet thickness range:0.3 to 100 mm Stepless adjustable feed speed:0.5 to 10 m/min :Electric sheet thickness adjustment :Electric tool positioning Power supply Operating Voltage:Three-phase 400 V with neutral and protective earth (3 x 400 V/N/PE) Frequency:50 Hz Power Consumption:36 kW Supply Line Fuse:63 A Supply Cable Cross-Section:16 mm² Control Voltage:24 V DC Short-Circuit Current Rating:10 kA Machine Weight:approx. 3,500 kg Dimensions (W/D/H):approx. 2,120 x 3,093 x 2,400 mm Aggregates / Units / Stations Contact Roller Unit:Adjustable working speed from 3 to 18 m/s Multi-Rotation Brush R2:Equipped with 3 brush heads, each with 2 brushes Conveyor Belt Cleaning:Dry cleaning system Nodpfx Adoxy Dmfshowp Vacuum System:Integrated vacuum with a 5.5 kW blower Workpiece Thickness Measurement:Automatic height detection Extraction System:No extraction unit included

Condition: good (used), Year of construction: 2013, operating hours: 2,300 h, functionality: fully functional, machine/vehicle number: 630124, DEBURRING MACHINE MANUFACTURER: ERNST / Sematec MODEL: ATLAS EBR YEAR OF MANUFACTURE: 2013 Condition: Used Operating hours: 2,300 hours Working width: 1,500 mm Max. material pass-through: 1,520 mm Workpiece thickness: 1–100 mm Feed rate: 0.5–4.0 m/min, steplessly adjustable Conveyor belt: Rubber Working height: 1,000 mm Max. part weight: 160 kg/m² Deburring roller: 420 mm diameter 50 oscillating strokes per minute Drive motor: 15 kW Abrasive size: 1,540 mm x 1,540 mm ATLAS brush module – SPIN 2 rotating brush units: 300 mm x 260 mm Vacuum system for small parts: 200 mm wide, 80 x 80 mm Infeed table, LxWxHxWork width x Sheet thickness: 2,704 x 385 x 1,650 x 0.8–100 mm Deburring module: 2,704 x 580 x 1,650 x 1,500 x 0.8–100 mm Brushing module: 2,704 x 870 x 1,650 x 1,500 x 0.8–100 mm Discharge/ belt cleaning: 2,704 x 290 x 1,650 x 1,500 x 0.8–100 mm Deburring module - Power Electric Air pressure Extraction m³/h Weight 16 32 6/80 bar 2,500/25 400 kg Brushing module - 12 24 6/80 2,500/725 1,600 kg Rotor module - 20 40 6/10 4,500/25 1,800 kg Discharge module - 1 2 - - 400 kg Operating voltage: 400 V / 50 Hz Special voltage: 480 V / 60 Hz Control voltage: 24 V Compressed air: 6 bar, dry and oil-free Feed rate: 0.5 – 4 m/min stepless (option up to 1.0 – 8 m/min stepless) Working height: 1,000 mm The external filter is not included in the sale. Working width 1,500 mm, maximum thickness 100 mm, vacuum conveyor runs the full machine width. The first station is a grinding roller (foam rubber roller with abrasive paper and pneumatic tension), which can also oscillate as required and removes burrs. The second module consists of two steel wire brush rollers that round off/knock down the burrs. This is followed by a rotor module (rotating multi-brush head) for fine edge rounding. EC Declaration of Conformity Dust collector is not included, but we can offer a suitable unit as an option. Operating manual included. The machine is sold without infeed roller conveyor! Nwodsxuu Dkspfx Adhep

Condition: new, Year of construction: 2025, ZGE60 - 60Lt Vibratory Sieving Machine * Changeable sieving system * 0.34 kW vibratory motor * Start/Stop thermal switch Nsdpfew Hpfvjx Adhswp It is used to automatically separate abrasive/polishing stones and material from each other after the deburring and/or polishing process in vibratory machines that do not have a sieving system.

Condition: excellent (used), Year of construction: 2018, operating hours: 1,950 h, Model: Timesavers Grindingmaster 81-Series-2100-W Year: 2018 Operating Hours: 1,950 h Configuration: High-performance wide belt grinding with fixed table and Siemens control. Capacity & Working Dimensions Min. Dimensions (LxWxH): 600 x 600 x 10 mm. Max. Dimensions (LxWxH): 1680 x 1830 x 30 mm. Max. Workpiece Weight: 250 kg. Machine Opening: 1 - 100 mm. Grinding Unit (Head 1) Contact Roller: Ø 280 mm, 70° Shore Ni 37 45. Main Motor: 90 kW. Belt Speed: 8 - 22 m/sec (frequency controlled). Nwedpfx Ajxxznkjdhsp Rotation: 2 directions. Belt Dimensions: Length 2620 mm x Width 2130 mm. Oscillation: Electronic, adjustable (2130, 1600, or 1380 mm).

Condition: used, Year of construction: 2020, Opportunity to purchase this LISSMAC deburring machine (Y2020) with working width of max. 1500 mm and sheet metal thickness from 0,5 mm to 50 mm. Nwedpfsxxykqex Adhop This machine is in very good condition with 2900 working hours and it can be inspected under power upon appointment. Additional equipment: o dry vacuum unit o 2 x 2000 m conveyor belts Availability: 11/2025 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection. Max. thickness: 0.5 - 50.0 mm Operating voltage: 400 V 50 Hz Max. width: 1500 mm Speed: 0-4 m/min Rated current: 82 A Rated power: 44.5 kW Operating hours: 2900 Weight: 4200 kg Machine dimensions (LxWxH): 3600 x 2100 x 2000 mm

Year of construction: 1998, condition: used, machine/vehicle number: RM48/3189, Item number: MA977 Manufacturer: RAS Type: Rasamax ST Duo Year of manufacture: 1987 Machine-No.: ST-Duo 1055 Length [mm]: 650 width [mm]: 600 height [mm]: 1200 weight [kg]: 190 Connected load: 380V / 1,4KW Nwjdocwyifopfx Adhep Number of tool stations [pcs.]: 2 Gear [rpm]: 1500 / 3000 accessories: base cabinet / roller conveyor / spare grinding wheel

Condition: new, Year of construction: 2025, -TFON Edge Rounding & Surface Processing System. Designed for superior versatility and precision, this system is engineered to process mild steel, aluminum, and stainless steel materials with thicknesses from 0 to 120 mm. It offers advanced edge rounding and surface cleaning capabilities tailored to demanding industrial applications -Material Compatibility -Mild Steel, Aluminum, Stainless Steel -Working Thickness Range -0 – 120 mm Edge Rounding: Radius 2 edge rounding for smooth, safe edges that enhance both aesthetics and functionality Precision Control: Integrated Siemens automation system delivers accurate, consistent control throughout processing. Independent Processing Stations: Multiple stations allow simultaneous or sequential processing, offering flexible workflow configurations. Table Size Options: Available with 650 mm, 1000 mm, or 1300 mm working widths to suit diverse production requirements. Table Types: Magnetic, vacuum, or magnetic-vacuum tables provide secure, adaptable support for various materials and part sizes. Plasma & Oxygen Technology: Advanced plasma and oxygen systems efficiently remove heavy burrs and dross after cutting, ensuring cleaner surfaces. Surface Purification: Effectively eliminates dirt, rust, oxide, and scale, preparing parts for subsequent processing such as welding or coating Edge Rounding for Coating: Produces uniform, defect-free edges ideal for painting and coating applications. Industry Applications: Steel Service Centers, Energy, Mining, Construction, Automotive — engineered for heavy-duty, high-performance use. Uniform Edge Results: 8 flap wheels work together to deliver consistent radius edges on every part. Pneumatic Oscillation System: Nwsdpfji E Tkajx Adhop Extends abrasive band life and maintains consistent performance by reducing wear through pneumatic oscillation. Engineered for industrial precision. Built for durability. Designed for versatile applications. TFON – Excellence in Edge Processing and Surface Preparation.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Passage width: 1500 mm Sheet thickness: 0.5–50 mm Load capacity: 300 kg/m Infinitely variable feed: 0–4 m/min Control: NC Total power requirement: 33 kW Machine weight approx.: 4,200 kg Space requirements approx.: 3600x2100x2000 mm Accessories: - Lissmac extraction system Nwsdpsxwuhzofx Adhjp

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS250, total width: 1,100 mm, total height: 950 mm, overall weight: 350 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 190 mm, workpiece length (max.): 190 mm, Equipment: CE marking, ZCVS 250 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 250 liter volume (Capacity between 125lt to 1250lt is available up to request) * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor Nwodpfx Adorkmv Sshep lubrication. CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5003 & RAL 7001 *Epoxy paint is used to ensure long life of the paint.

Condition: used, Year of construction: 2005, total length: 3,940 mm, total width: 1,980 mm, total height: 2,010 mm, Empty weight: 7.000 kg Price: On request Working width: 950mm Working height: 0,5-120mm - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: Nwjdpfx Ajxwnbuedhop - Control: CNC - Motor power: 39.0kW - Transport dimensions: 3940mm x 1980mm x 2010mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, working width: 1,100 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, total length: 2,210 mm, total width: 1,530 mm, total height: 1,940 mm, overall weight: 1,200 kg, input voltage: 400 V, workpiece height (max.): 50 mm, power: 6 kW (8.16 HP), input current: 18 A, Edge rounding up to 1100mm width. Ideal for edge rounding of light burrs up to 1100 mm working width. The DM1100 C performs edge rounding and removes sharp edges on both the outer and inner contours of stainless steel, steel or aluminum parts that have been cut in either a laser, shearing or punching machine. This machine processes parts of various dimensions, including products as small as 50x50mm. The DM1100 C has a station with double cross belts for edge rounding and leaves clean, smooth and burr-free edges on the complete parts. DM1100 C Working capacity (mm) 1100x50 No. of cross belt stations 1 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Cross conveyor motor (kW) (2x) 3 Feed motor (kW) 0.18 Total power (kW) 6 Power consumption (A) 18 Nwodpfx Aetzfntedhsp Rod suction connection per head (Ø mm) 150 Dimensions (mm) 2213x1530x1940 Weight (kg) 1200

Condition: ready for operation (used), Year of construction: 2017, Magnetic chuck / magnetic holder, tiltable magnet (swivel type), used e.g. for setting the angle of a workpiece. Manufacturer: SAV Spannsysteme No. 245.01-25.5 Applications: - Surface grinding machines - Milling machines - Measurement and quality control - Assembly / welding operations Nwjdpovkyr Asfx Adhsp

Condition: new, Year of construction: 2025, -TFON Edge Rounding Machine Specifications: Material Compatibility: Steel, Aluminum, Stainless Steel. Process: Edge Rounding. Material Thickness: 0 – 120 mm Nwsdpfx Adjui Ih Rshsp Maximum Material Width: 1,000 mm. Minimum Part Dimensions: 50 × 50 mm. Maximum Material Weight: 500 kg. Conveyor Speed: 0.6 – 4.0 m/min Machine Weight: 3.000 kg

Condition: good (used), functionality: fully functional, 1st station: deburring of sheet metal edges, 2nd station: deburring of notches and outer radii, with VA brushes; maximum sheet thickness: 5 mm Nodexxbm Hopfx Adhjwp

Condition: new, Year of construction: 2025, machine/vehicle number: ZGS200, 200 l Capacity * 7.5 kW high-performance three-phase drive motor. * Adjustable speed control up to 300 rpm. * Control panel and dosing pump included. - The dosing pump automatically adds the chemical to the tank Njdpfxsw Hb Tfs Adhjwp * Working hours timer * PLC panel programmable on request * PU or INOX plate * Replaceable valve for wastewater drainage. * Inner tank features channels and cavities to ensure a non-stick wall.

Condition: used, Year of construction: 2023, intake manifold diameter: 250 mm, power: 4 kW (5.44 HP), Used extraction system with 4 kW power, in very good condition and inspected by the manufacturer. All filters have been replaced. Nodpfsxw Ik Ajx Adhowp

Condition: new, Year of construction: 2025, -TFON Edge Rounding & Surface Purification System -Material Compatibility. Mild Steel, Aluminum, and Stainless Steel -Working Thickness Range: Accommodates material thicknesses from 0 to 120 mm. -Edge Rounding Provides Radius 2 edge rounding for smooth, safe edges that enhance both the appearance and functionality of the workpiece. -Precision Control: Equipped with a Siemens automation system for accurate and consistent control throughout the entire process. Independent Stations: Multiple processing stations enable versatile operations, allowing different tasks to be performed simultaneously or sequentially Table Options: Available working table sizes of 650 mm, 1000 mm, or 1300 mm to meet specific production requirements Table Types: Flexible configurations including magnetic, vacuum, or magnetic-vacuum tables ensure secure support for various materials and part sizes. Nwsdpjhq A T Ujfx Adhep Plasma and Oxygen Technology: Utilizes advanced plasma and oxygen technology to effectively remove heavy burrs and dross after cutting, delivering cleaner and smoother surfaces Surface Purification: Efficiently removes surface contaminants such as rust, oxide, and scale, preparing parts for further processing Edge Rounding for Coating: Prepares parts perfectly for painting and coating by ensuring a uniform, imperfection-free surface Industry Applications: Ideal for Steel Service Centers, Energy, Mining, Construction, and Automotive sectors, offering tailored solutions for heavy-duty applications. Uniform Results: Six flap wheels operate in unison to provide consistent, equal radius edges on every part. Pneumatic Oscillation System: Extends the lifespan of emery bands by minimizing wear and maintaining consistent performance over time.

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,370 mm, total width: 1,370 mm, total height: 1,020 mm, overall weight: 360 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.9 kW (2.58 HP), power: 1.9 kW (2.58 HP), workpiece width (max.): 240 mm, workpiece length (max.): 240 mm, ZDV Series - Circular Type Dryers For drying after deburring and polishing Nwodpfjl Sm N Tjx Adhjp Corn granule is used. Various volumes in the range of 125lt - 1650lt Includes seperating system- Resistance heated Drying for all kinds of metal and non-metal materials Suitable for automation system Optional accessories Dryer machines are used to dry the wet surfaces of the parts after the process in surface finishing machines where deburring, polishing, etc. are performed. At the same time, dryer machines help to prevent corrosion of the parts Corn cobs are used in dryer machines. Hot corn cobs absorb water from the surface of the parts during process. The dryer machines have a heating system with resistance. By the help of heating system, the drying speed increases and it saves time and energy. On the machine, there is a material loading point in order to transfer wet parts to the machine easily and a discharge slider which can take out the parts after drying easily. During drying process, the parts and corn cobs move through the ramp in the bowl to the self-discharge way. Activating the slider is enough to take out the dried parts. Thanks to ergonomically designedchassis height and springs, staff can work with high efficiency. Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are some of the distinctive design features of the machine chassis. Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used. It can work integrated with automation systems with PLC software. Dust absorbing system is available as an option. The dimensions of the dryer machines are designed to work integrated with the previous processes surface finishing machines. Therefore, the products from the first process are able to be transferred to the material loading point of the dryer automatically.

Condition: as good as new (ex-display), Year of construction: 2025, working width: 1,100 mm, sheet thickness (max.): 100 mm, The 32 RB series offers the solution for manufacturers delivering premium-quality products. This top quality is achieved by a multi-rotating brush unit with four abrasive lamella brushes, which evenly deburr and perfectly round the edges of the metal. Multi-directional rotary brush deburring machine (RB) for consistent deburring and finishing of flat sheet metal parts. All-around processing in a single pass, providing the part's surface with a non-directional finish. Equipped with one (or more) abrasive belt units (W) for pre-deburring and final finishing. - Abrasive belt unit - Rotary brush unit (self-calibrating) - Abrasive belt unit Nwsdpsxw Ikcofx Adhep

Condition: new, Year of construction: 2025, -TFON Precision Edge Rounding & Finishing System Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs. -Material Compatibility: Suitable for aluminium, stainless steel, and mild steel applications -Wide Thickness Range: Efficiently processes materials from 0 to 120 mm thick -Finishing Excellence: Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality. Industrial Versatility: Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries Edge Rounding Precision: Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance Advanced Automation: Integrated Siemens control system ensures enhanced precision and operational reliability Independent Processing Stations: Enable flexible, efficient multi-stage processing tailored to complex workflows. Multiple Table Width Options: Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements. Nwedshq Dbmspfx Adhep Customisable Conveyor Options: Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling. Surface Cleaning: Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing. Improved Operator Safety: Edge rounding station minimizes risks of cuts and injuries from sharp edges. High-Performance Finishing: Equipped with Scotch abrasive technology to deliver smooth, even finishes. Extended Abrasive Life: Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime. Consistent Radius Output: Six flap wheels ensure uniform edge radii on every part for consistent quality. Engineered for performance. Designed for safety. Built for industrial versatility. TFON – Surface perfection, every time .

Condition: as good as new (ex-display), Year of construction: 2025, working width: 1,525 mm, sheet thickness (max.): 100 mm, overall weight: 6,400 kg, The 42 series provides the solution for manufacturers who deliver premium quality products. This top-level quality is achieved by a multi-rotating brush unit with 8 abrasive flap brushes, which perform uniform deburring and produce perfectly rounded metal edges. This is a multidirectional rotary brush machine (RB) for consistent deburring and finishing of flat metal parts. It enables all-round processing in a single pass, giving the workpiece a non-directional surface finish. Equipped with one or more abrasive belt units (W) for pre-deburring and fine grinding. Cup brush unit (TB) for deburring, edge breaking, non-directional finishing, or removal of scale. - Abrasive belt unit (self-calibrating) - Cup brush unit (self-calibrating) - Rotary brush unit with 8 brushes (self-calibrating) Nwedpfx Aexw Ih Uedhop

Condition: refurbished (used), Year of construction: 2022, -Pre-owned Surfacer Series TFON RB-2510 -This TFON RB-2510 is a reliable, well-maintained pre-owned machine, ready for immediate use. Nwsdpfx Adjiih Aaehjp -Previously utilized exclusively in our inhouse production for deburring and edge rounding applications, this unit remains in excellent working condition and is fully operational. It has proven its reliability and durability, making it a strong choice for long-term use in your production line

Condition: new, Year of construction: 2025, -Custom-Made Machines Tailored to Your Production Needs -Our custom-made machines are meticulously designed and engineered to meet the unique demands of your production processes. Whether your focus is finishing, oxide removal, or radius edge rounding, these machines deliver outstanding precision and performance -Finishing: Achieve smooth, high-quality finishes on a wide range of materials, ensuring a consistently professional, polished appearance -Oxide Removal: Effectively eliminate surface oxides to provide a clean, contaminant-free surface—essential for further processing or coating applications. Nwsdpfx Aehq Dbxedhop -Radius Edge Rounding: Precisely round edges to your specified radius, enhancing both safety and the overall quality of your finished products. Customization Options Each machine is tailored specifically to your requirements, offering flexibility in: Processing Speeds: Adjustable to match your varying production demands Special Features: Options include dust and fume extraction systems, adjustable pressure settings, and programmable configurations designed to optimize your workflow Built for Durability. Constructed with longevity in mind, our custom machines are built to perform reliably through extended production cycles. Whether for small-scale projects or high-volume industrial applications, these machines provide exceptional results, year after year

Condition: new, Year of construction: 2025, -TFON Precision Edge Rounding & Finishing System. -Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs -Material Compatibility: Suitable for aluminium, stainless steel, and mild steel applications. -Wide Thickness Range: Efficiently processes materials from 0 to 120 mm thick. -Finishing Excellence: Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality. Industrial Versatility: Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries Edge Rounding Precision: Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance. Advanced Automation: Integrated Siemens control system ensures enhanced precision and operational reliability. Independent Processing Stations: Enable flexible, efficient multi-stage processing tailored to complex workfl Multiple Table Width Options: Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements. Customisable Conveyor Options: Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling. Njdpfx Ajhq A Txjdhswp Surface Cleaning: Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing Improved Operator Safety: Edge rounding station minimizes risks of cuts and injuries from sharp edges. High-Performance Finishing: Equipped with Scotch abrasive technology to deliver smooth, even finishes. Extended Abrasive Life: Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime Consistent Radius Output : Six flap wheels ensure uniform edge radii on every part for consistent quality. Engineered for performance. Designed for safety. Built for industrial versatility TFON – Surface perfection, every time.