Used Sheet Metal Processing Machine for sale (72,876)

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Iiedpfx Abeif Sg Sonef Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1, overall weight: 4 kg, Downspout Pipe Production Line Strip thickness: 0.6 - 0.7 mm Material quality: Steel and Pre-painted Iodpfxswvhnhs Abneif Product diameter: Ø 100 mm ( 75, 87, 111,120 mm optional dimention) Production Line included: Double Head Decoiler: 4+4 tons, Roll Forming Machine casstte type ( with extra cassettes ) Hydraulic Cutting Unit.

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Iijdpfx Ajwz Ukyobnjf Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Condition: new, Year of construction: 2026, -TFON Lite SURFACER® Series The TFON Lite SURFACER® Series enables simultaneous processing of multiple parts, offering unmatched versatility through a range of consumable options and an efficient vacuum table system. Designed for ease of use, it features quick brush changes and the capability to mount two different brushes tailored to your specific applications. -With brushes mounted parallel to the table, the system guarantees flawless grinding performance with every use. Ergonomically engineered, the motor weight is supported by the machine frame itself, significantly reducing operator fatigue and improving workplace safety. Iiodpsqzxhyjfx Abnsf -Backed by TFON’s trusted guarantee, the SURFACER® Series strikes the perfect balance between minimizing operational costs and maximizing finish quality. Key Specifications: -Minimum Material Size: 80 × 80 mm. Material Thickness: 3 – 200 mm. Maximum Material Width: 800 mm. Maximum Material Length: 500 mm

Condition: used, Year of construction: 2008, working width / mm workpiece height / mm / Workpiece thickness: 1-70 mm Min. workpiece length: 350 mm Min. workpiece length with magnetic or vacuum track: 80 mm Band filter unit volume Ab=900 approx. 350 l Band filter unit volume Ab=1400 approx. 400 l Working height constant 1000 mm Feed speed 2/4 m/min Feed speed stepless 1.5-8 m/min Operating voltage 400 VAC Control voltage 24 V DC, 230 VAC Frequency 50Hz Compressed air connection R 3/8" Minimum compressed air pressure 5 bar Minimum compressed air volume EMSN II +2F 10 NI/min Minimum compressed air quantity EMSN II /L +2F 80 NI/min Overall electrical connection See installation plan Weight of the machine working width 900 mm approx. 4200 kg Weight of the machine working width 1400 mm approx. 5100 kg Weight of the machine working width 1540 mm approx. 5600 kg Sandpaper dimensions sanding roller AB=900 1540 mm long x 900 mm wide Sandpaper dimensions sanding roller AB=1400 1540 mm long x 1400 mm wide Sandpaper dimensions sanding roller AB=1540 1540 mm long x 1540 mm wide SERIOUS Automatic sheet metal deburring machine with wet grinding device Type EM 5 N/II/L + 2 F 1400 Year of construction 2008 Factory - No. 780063 Machine/Equipment: Sheet metal deburring machine using the wet ship process for stamping, laser and nipple parts of different materials with flexible grinding roller, as well as 2 flap brushes for particularly high edge rounding and 2 Spring steel brushes for oxide removal (worn out) The machine is equipped with a continuous conveyor belt for the Workpiece transport equipped. Effective working width: 1380mm Minimum workpiece length: 350mm Special equipment: •Vacuum suction system 300mm wide, for non-magnetic small parts Minimum length of 80mm, with a minimum area of ??200cm² Iiedpfx Aoinwwzsbnof •Magnet track 300mm wide Minimum length of 80mm, with a minimum area of ??40cm² •Frequency converter for stepless feed & speed regulation •various Abrasives as accessories

Condition: good (used), Year of construction: 2016, operating hours: 715 h, functionality: fully functional, machine/vehicle number: 2530-01, working width: 900 mm, Due to machine rejuvenation, we would like to sell our barely used Timesavers wet deburring machine. Iodpfx Aev Tnfiebnsif The machine is available for inspection and testing; it is live. Please contact us with any questions.

Year of construction: 2008, condition: ready for operation (used), A complete sheet metal processing center for bending and cutting including automation is available. Documentation available. On-site inspection is possible. Isdpfev Rp S Eox Abneif

Condition: used, Year of construction: 2005, total length: 3,940 mm, total width: 1,980 mm, total height: 2,010 mm, Empty weight: 7.000 kg Working width: 950mm Working height: 0,5-120mm - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Drive system: CNC - Number of stations [pcs]: 3 - └ Station type 1: Abrasive belt - └ Station type 2: Rotary brush - └ Station type 3: Rotary brush - Power [kW]: 39 - Min. sheet thickness [mm]: 0.5 - Max. sheet thickness [mm]: 120 - Max. working width [mm]: 950 - Transport dimensions: 3940mm x 1980mm x 2010mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Iedpfx Abjxwnbusnjif Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: KF0310KMB20260601, type of input current: three-phase, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, space requirement length: 6,200 mm, space requirement height: 2,650 mm, space requirement width: 2,500 mm, controller manufacturer: Self-developed brand, workpiece length (max.): 2,500 mm, workpiece height (max.): 160 mm, nominal power (apparent): 45 kVA, number of spindles: 14, Key Product Features & Technical Parameters of KMB2500 Bending Center(Panel Bender)1. Core Product Features Bending Capacity - Fast bending: 0.2s per stroke, one-step forming - Universal dies for arc, hemming & multi-angle bending, cut mold & labor cost - Processes carbon steel, stainless steel, aluminum, film-covered sheets Ijdexu Uhvopfx Abnoif - Switchable edge/corner positioning for consistent precision; 3 processing modes (High Precision/Standard/Ultra-Fast) Mechanical Structure - Stress-relieved welded steel frame, higher rigidity & anti-resonance than cast frames - Press-arm feeding unit: 120m/min max feed speed, 1.9G acceleration - Hardened heavy-duty bending knives for long service life - Brush & ball worktable, auto lubrication, visual unbalanced load warning Intelligent Control - EtherCAT full closed-loop bus system, up to 64 axes, 2ms refresh, ±0.01mm accuracy - Auto angle/rotation compensation, die collision avoidance, offline simulation - IoT & cloud access, remote diagnosis & upgrade; reserved robot/production line interfaces - Simple graphic programming, low operator skill threshold Operation Merits - Full servo drive, low power consumption, low maintenance, ~55dB low noise 2. Technical Parameters -ower: 380V, average 7kW; Overall size: 6200×4500×2650mm - Max bending size: 2500×1250mm; Min thickness 0.3mm - Max thickness: 3mm steel/stainless steel, 4mm aluminum - Bend angle: -90°~90°(≤2.5mm steel), 0°~180°(≤2mm steel) - Max bend height 170mm, min arc radius 2mm - Min forming inner size customizable; Reducer backlash: 3 arcmin

Condition: used, Year of construction: 2003, XXL-Center RAS 75.06-2 long bending center for fully automatic positive and negative bending, where it is not necessary to turn the sheet metal. Iijdpozru Nzefx Abnsf Usable length 6400 mm Maximum sheet metal thickness (400 N/mm²) 1.5 mm Four motorized and extremely fast axes controlled by CNC (no hydraulics) For: • Upper and lower bending beam speed: 126 degrees/s • Upper beam speed: 60 mm/s • Back gauge travel: 12-750 mm • Back gauge speed: 350 mm/s • Bending accuracy (depending on the quality of the sheet metal): up to +/- 1 degree

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0312101, working width: 550 mm, overall weight: 3,000 kg, power: 32 kW (43.51 HP), TECHNICAL DETAILS Number of stations: 1 Iiodpfszrmqqjx Abnjf Station type: Belt grinding Maximum working width: 550 mm MACHINE DETAILS Power: 32 kW Control system: Conventional Machining process: Dry Dimensions & Weight Dimensions (L x W x H): 1,700 x 2,700 x 2,900 mm Dry weight: 3,000 kg Shipping packages: 2 EQUIPMENT CE marking

Condition: new, functionality: fully functional, Fiber Laser Cutting Machine for Sheet Metal – Different Sizes & Laser Powers Description Industrial CNC fiber laser cutting machine for high-speed and precise cutting of sheet metal. Suitable for general metal fabrication as well as production of HVAC components, ventilation parts, electrical cabinets, machine enclosures, brackets, roofing and facade elements and other sheet metal products. The machine can be configured individually according to the customer's required working area, material type and cutting thickness. Suitable materials: Carbon / mild steel Stainless steel Galvanized steel Aluminum Ijdpfxjztx Epo Abneif Brass Copper Standard configuration example Working area: 1500 × 3000 mm Laser power: 1500 W Cutting thickness: approx. 0.5–10 mm, depending on material and cutting conditions Positioning accuracy: up to ±0.01 mm Max. idle speed: 80–110 m/min Acceleration: up to 1G Cooling: water cooling Cutting gases: oxygen / nitrogen / compressed air Power supply: 380 V, 3 Ph, 50/60 Hz File formats: DXF, PLT, AI, NC and others Other working areas and laser powers available Depending on the production task, machines can be supplied with different working areas, including: 1300 × 2500 mm 1500 × 3000 mm 1500 × 4000 mm 1500 × 6000 mm 2000 × 6000 mm 2500 × 6000 mm 2500 × 12000 mm 2500 × 14000 mm Available laser powers include approximately: 1.5 / 2 / 3 / 6 / 8 / 12 / 20 / 30 / 60 kW, depending on machine configuration. The catalogue includes large-format systems up to 2500 × 14000 mm and laser sources up to 60 kW. Higher laser power allows processing of thicker material and/or significantly increases cutting speed on thinner sheet. The required laser power is selected according to steel grade, maximum thickness, required cutting speed and cutting gas. Available configurations Open single working table Exchange table Fully enclosed machine Large-format cutting machine Automatic loading/unloading Dust and fume extraction Automatic lubrication Different laser powers and table dimensions Applications Ideal for sheet metal processing, HVAC and ventilation production, steel fabrication, machinery manufacturing, electrical enclosures, construction components, metal furniture, roofing and facade production. The machine can be integrated with press brakes, guillotines, roll forming machines and other sheet metal processing equipment. SEO Keywords fiber laser cutting machine, CNC laser cutter, sheet metal laser cutting machine, metal laser cutter, steel laser cutting machine, fiber laser 1500W, 3000W laser cutter, 6000W fiber laser, 12000W laser cutting machine, high power fiber laser, large format laser cutting machine, sheet metal cutting machine, CNC metal cutting machine, industrial laser cutter, galvanized steel laser cutting, stainless steel laser cutter, HVAC laser cutting machine, metal fabrication equipment, 1500x3000 laser cutter, 2000x6000 laser machine, 2500x12000 laser cutter.

Condition: good (used), Year of construction: 1985, machine/vehicle number: 2.309.044, Offer 23195 Precision - deburring - faceting milling machine / edge milling machine Technical data: Steel - stainless steel - aluminum - plastic ,machining deburring and faceting process is done with milling cutter Bevel angle 45 ° bevel width infinitely variable length of guide bar 500 mm working height 750 mm speed 2750 rpm drive 400 V / 0,7 kW space requirement approx. W 500 x D 400 x H 8500 mm Isdpfx Aenvdtcjbnoif Weight approx. 30 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: V 254629, Offer 25311 Technical Data: - Cutting length: 250 mm - Cutting angle: 90° - Cutting capacity: - Mild steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate: up to approx. 55 / min - Table size: W 800 x D 800 mm - Working height: approx. 940 mm - Stops infinitely adjustable in length and angle - Drive: 400 V / 4 kW - Oil filling: 50 l - Electric foot pedal - Required space: approx. W 1300 x H 1250 x D 1300 mm - Weight: approx. 800 kg Iodpfexqzirox Abnoif - Mobile base frame

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Iedpfxohmmfko Abnoif Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 29,658 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, controller model: Sinumeric, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS 3000, laser power: 3,000 W, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 7 bar, cutting range flat at 90° (X-axis): 3,010 mm, cutting range flat at 90° (Y-axis): 1,510 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, AMARON has nothing to do with the machine. Iiodpjyx Iqzjfx Abnef

Condition: new, Year of construction: 2026, -TFON Edge Rounding Machine Specifications: Material Compatibility: Steel, Aluminum, Stainless Steel. Process: Edge Rounding. Material Thickness: 0 – 120 mm Maximum Material Width: 1,000 mm Minimum Part Dimensions: 50 × 50 mm Maximum Material Weight: 500 kg. Conveyor Speed: 0.6 – 4.0 m/min Iijdpjui Ih Refx Abnjf Machine Weight: 3.000 kg

Condition: new, Year of construction: 2026, -TFON Edge Rounding & Surface Processing System: Designed for superior versatility and precision, this system is engineered to process mild steel, aluminum, and stainless steel materials with thicknesses from 0 to 120 mm. It offers advanced edge rounding and surface cleaning capabilities tailored to demanding industrial applications. -Material Compatibility: -Mild Steel, Aluminum, Stainless Steel. -Working Thickness Range: -0 – 120 mm Edge Rounding: Radius 2 edge rounding for smooth, safe edges that enhance both aesthetics and functionality Precision Control: Integrated Siemens automation system delivers accurate, consistent control throughout processing. Independent Processing Stations: Multiple stations allow simultaneous or sequential processing, offering flexible workflow configurations. Table Size Options: Available with 650 mm, 1000 mm, or 1300 mm working widths to suit diverse production requirements Table Types: Magnetic, vacuum, or magnetic-vacuum tables provide secure, adaptable support for various materials and part sizes. Plasma & Oxygen Technology: Advanced plasma and oxygen systems efficiently remove heavy burrs and dross after cutting, ensuring cleaner surfaces. Surface Purification: Effectively eliminates dirt, rust, oxide, and scale, preparing parts for subsequent processing such as welding or coating Edge Rounding for Coating: Produces uniform, defect-free edges ideal for painting and coating applications. Industry Applications: Iiodpei E Tkajfx Abnof Steel Service Centers, Energy, Mining, Construction, Automotive — engineered for heavy-duty, high-performance use. Uniform Edge Results: 8 flap wheels work together to deliver consistent radius edges on every part. Pneumatic Oscillation System: Extends abrasive band life and maintains consistent performance by reducing wear through pneumatic oscillation. Engineered for industrial precision. Built for durability. Designed for versatile applications. TFON – Excellence in Edge Processing and Surface Preparation.

Condition: new, Year of construction: 2026, -Tfon Bevel Wizard® Linear. -Precision Beveling for Linear & Non-Linear Applications. -The TFON Bevel Wizard® Linear is a high-performance beveling solution designed to deliver exceptional accuracy on both straight and contoured sheet edges. Engineered with flexibility at its core, it features an advanced Trace Tracking System that automatically adjusts to variations in material thickness and geometry—ensuring precise and consistent edge processing even for complex parts. -Key Features 🔹 Advanced Trace Tracking System: Intelligently detects and adapts to diverse edge shapes and contours in real time. 🔹 Wide Beveling Range: Adjustable bevel angles from -30° to +80°, ideal for a broad range of applications. - Optimized for Large Workpieces: Capable of processing materials up to 12,000 mm in length and 100 mm in thickness. - Industrial-Grade Durability: Built to last with a solid 10,000 kg frame for long-term reliability. 🔹 Superior Surface Finish: Delivers a high-quality finish with a consistent Emery Band Rotation Speed of 30 m/min and a Ø135 mm contact wheel. -Technical Specifications: Beveling Angle Range: -30° to +80° -Material Thickness: 4 – 100 mm. -Minimum Material Width: 250 mm. Minimum Material Length: 250 mm Maximum Material Length: 12,000 mm Part Feed Speed: 1.5 – 5 m/min Part Completion Speed: 3 meters/day Maximum Part Indentation: Ø400 mm Emery Band Rotation Speed: 30 m/min Isdpfort Tpnsx Abnjif Contact Wheel Diameter: Ø135 mm. Emery Band Drum Diameter: Ø400 mm. Machine Weight: 10,000 kg Engineered for precision. Built for performance. Designed for industrial excellence Tfon Bevel Wizard® Linear — Where Accuracy Meets Efficiency...

Condition: refurbished (used), Year of construction: 2022, -Pre-owned Surfacer Series TFON RB-2510 (M) -This TFON RB-2510 is a reliable, well-maintained pre-owned machine, ready for immediate use. --Previously utilized exclusively in our inhouse production for deburring and edge rounding applications, this unit remains in excellent working condition and is fully operational. It has proven its reliability and durability, making it a strong choice for long-term use in your production line. Ijdjiih Aaepfx Abnjif

Condition: new, Year of construction: 2026, -TFON Edge Rounding & Surface Purification System -Material Compatibility. Mild Steel, Aluminum, and Stainless Steel -Working Thickness Range: Accommodates material thicknesses from 0 to 120 mm. -Edge Rounding Provides Radius 2 edge rounding for smooth, safe edges that enhance both the appearance and functionality of the workpiece. -Precision Control: Equipped with a Siemens automation system for accurate and consistent control throughout the entire process. Independent Stations: Multiple processing stations enable versatile operations, allowing different tasks to be performed simultaneously or sequentially. Table Options: Available working table sizes of 650 mm, 1000 mm, or 1300 mm to meet specific production requirements. Table Types: Flexible configurations including magnetic, vacuum, or magnetic-vacuum tables ensure secure support for various materials and part sizes. Plasma and Oxygen Technology: Utilizes advanced plasma and oxygen technology to effectively remove heavy burrs and dross after cutting, delivering cleaner and smoother surfaces. Surface Purification: Efficiently removes surface contaminants such as rust, oxide, and scale, preparing parts for further processing. Iijdpfx Abshq A T Ujnof Edge Rounding for Coating: Prepares parts perfectly for painting and coating by ensuring a uniform, imperfection-free surface. Industry Applications: Ideal for Steel Service Centers, Energy, Mining, Construction, and Automotive sectors, offering tailored solutions for heavy-duty applications. Uniform Results: Six flap wheels operate in unison to provide consistent, equal radius edges on every part. Pneumatic Oscillation System: Extends the lifespan of emery bands by minimizing wear and maintaining consistent performance over time.

Condition: new, Year of construction: 2026, -TFON Precision Edge Rounding & Finishing System. Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs. -Material Compatibility: Suitable for aluminium, stainless steel, and mild steel applications. -Wide Thickness Range: Efficiently processes materials from 0 to 120 mm thick -Finishing Excellence: Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality. Industrial Versatility: Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries. Edge Rounding Precision: Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance Advanced Automation: Integrated Siemens control system ensures enhanced precision and operational reliability Independent Processing Stations: Enable flexible, efficient multi-stage processing tailored to complex workflows. Multiple Table Width Options: Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements. Customisable Conveyor Options: Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling. Surface Cleaning: Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing. Isdpfxohq Dbms Abnoif Improved Operator Safety: Edge rounding station minimizes risks of cuts and injuries from sharp edges. High-Performance Finishing: Equipped with Scotch abrasive technology to deliver smooth, even finishes. Extended Abrasive Life: Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime. Consistent Radius Output: Six flap wheels ensure uniform edge radii on every part for consistent quality. Engineered for performance. Designed for safety. Built for industrial versatility. TFON – Surface perfection, every time

Condition: new, Year of construction: 2026, -TFON Precision Edge Rounding & Finishing System. -Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs. -Material Compatibility: Suitable for aluminium, stainless steel, and mild steel applications. -Wide Thickness Range: Efficiently processes materials from 0 to 120 mm thick. -Finishing Excellence: Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality. Industrial Versatility: Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries. Edge Rounding Precision: Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance. Advanced Automation: Integrated Siemens control system ensures enhanced precision and operational reliability. Independent Processing Stations: Enable flexible, efficient multi-stage processing tailored to complex workflows. Multiple Table Width Options: Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements. Customisable Conveyor Options: Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling. Surface Cleaning: Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing. Improved Operator Safety: Edge rounding station minimizes risks of cuts and injuries from sharp edges. Iedpfohq A Txex Abnjif High-Performance Finishing: Equipped with Scotch abrasive technology to deliver smooth, even finishes. Extended Abrasive Life: Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime. Consistent Radius Output : Six flap wheels ensure uniform edge radii on every part for consistent quality. Engineered for performance. Designed for safety. Built for industrial versatility. TFON – Surface perfection, every time.

Condition: new, Year of construction: 2026, Custom-Made Machines Tailored to Your Production Needs. Iedpfxohq Dbxe Abnjif Our custom-made machines are meticulously designed and engineered to meet the unique demands of your production processes. Whether your focus is finishing, oxide removal, or radius edge rounding, these machines deliver outstanding precision and performance. -Finishing: Achieve smooth, high-quality finishes on a wide range of materials, ensuring a consistently professional, polished appearance. -Oxide Removal: Effectively eliminate surface oxides to provide a clean, contaminant-free surface—essential for further processing or coating applications. -Radius Edge Rounding: Precisely round edges to your specified radius, enhancing both safety and the overall quality of your finished products. -Customization Options Each machine is tailored specifically to your requirements, offering flexibility in: Processing Speeds: Adjustable to match your varying production demands. Special Features: Options include dust and fume extraction systems, adjustable pressure settings, and programmable configurations designed to optimize your workflow. Built for Durability.. Constructed with longevity in mind, our custom machines are built to perform reliably through extended production cycles. Whether for small-scale projects or high-volume industrial applications, these machines provide exceptional results, year after year.

Condition: used, Year of construction: 2009, functionality: fully functional, working width 1100 mm Ijdpfx Abjznm S Teneif 3 internal operator groups 1 external operator group belt cooling via liquid