Used Sheet Metal Roller for sale (42,706)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 25498, roller (bottom) diameter: 320 mm, roller (top) diameter: 320 mm, side roll diameter: 260 mm, working width: 2,070 mm, sheet thickness (max.): 25 mm, TECHNICAL DETAILS Sheet width: 2,070 mm Sheet thickness: 25 mm Bending capacity: 18 mm Top roller diameter: 320 mm Side roller diameter: 260 mm Lower roller diameter: 320 mm MACHINE DETAILS Total power supply: 26 kW Dimensions & Weight Space requirement: approx. 4,700 x 2,000 x 2,200 mm Machine weight: approx. 8,100 kg EQUIPMENT Hydraulic lateral roller adjustment Conical bending device 2 driven rollers Hardened rollers Hydraulic drop-end bearing Bsdoygw Ikopfx Afmowp Mobile control panel Foot switch Safety device CE marking

Condition: new, Year of construction: 2025, Roller for sheet metal unfolding. Working width: 1.250mm, loading capacity up to 2 tons and a brake. Bodpfx Aoxd Rgysfmewp

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Bodpfewz Ukyjx Afmewp Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Condition: good (used), functionality: fully functional, Year of construction: 2000, Motorized Swivel Bending Machine Manufacturer: HERA, Type: SM4 2500 x 6mm Year of manufacture: 2000 Technical data Manufacturer: HERA Type: SM 4 Year of manufacture: 2000 Capacity: 2520 x 6 mm Upper die stroke: 450 mm Lower die adjustment: max. 80 mm Bending die adjustment: max. 100 mm Swivel range: 135° Connection value: 5.5 kW / 7.5 kW Operating voltage: 400 V / 50 Hz Control voltage: 230 V Dimensions: approx. L 3.90 x W 2.60 x H 1.85 m Weight: 6.7 t Equipment • Controlled back gauge 10-1000mm • Siemens S7/Simatic OP7 control system • Motorized bending die adjustment • Rail for die mounting H 95mm, L = 2,500mm, segmented • Clamping rail • Bending rails 20mm, 40mm The machine is in good condition. It comes from the workshop of a correctional facility. All information is without guarantee. Bwodszilw Dopfx Afmep An inspection while the machine is running is possible at any time in our showroom.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: electric, For sale: lightly used sheet metal rewinding machine SVM-100, designed for automatic rewinding of sheet metal from large coil rolls into smaller rolls of 25m2 (1250*20,000 mm). The machine was manufactured in 2024, has been used very little, is in excellent technical and visual condition, and is fully ready for operation. It is an excellent solution for companies that produce roofing materials or other sheet metal products supplied in rolls. The machine automatically: - Unwinds the sheet metal from the coil up to 1 ton. If you want to rewind from 2-5 ton coils, an automatic unwinding unit is required to feed the sheet metal. - Winds the sheet metal into a roll. - Cuts the sheet to a specified length. - Allows the roll to be wrapped with stretch film. - Applies protective film to the surface of the sheet metal. The machine is connected – it can be inspected and tested. Technical specifications: Manufacturer: Foldsolutions / UAB Pakservisas Model: SVM-100 Year of manufacture: 2024 Made in: Lithuania Operating parameters: Sheet metal width: 1230–1260 mm Sheet metal thickness: 0.4–0.6 mm Maximum roll length: 20 m Roll diameter: approx. 300 mm Equipment: Bodpszibwgefx Afmjwp Automatic sheet metal winding Sheet metal cutting to a specified length Automatic roll packing process with stretch film Option to use protective film on the sheet metal Integrated length measuring encoder Touchscreen control panel Manual and automatic operating modes Pneumatic cutting system Adjustable operating speeds Length calibration function for precise production Emergency stop system Technical data: Electrical power: 400 V / 50 Hz / 3 phases Power: 2.6 kW Required compressed air pressure: 0.65 MPa Air consumption: 0.3 m³/min Dimensions (L × W × H): 2555 × 1730 × 1800 mm Weight: approx. 600 kg Application: Ideally suited for roofing materials, facade, sheet metal products, sheet metal processing companies, and other manufacturers who require fast, accurate, and safe preparation of sheet metal rolls for transport or storage. If you have any further questions, we will be happy to answer them.

Condition: used, functionality: fully functional, Year of construction: 1992, operating hours: 18,922 h, control type: CNC control, Hydraulic pivoting bending machine Manufacturer: RAS, Type: 74.30, 3200 x 4mm Technical data Manufacturer: RAS Type: 74.30 Year of manufacture: 1992 Usable length: 3200 mm Capacity: 4 mm Operating hours: 18,922 h (read) Stroke: 400 mm Adjustability of the lower die: 80 mm Adjustability of the bending die: 80 mm Bending angle setting: 0 – 180° Bending angle accuracy: +/-0.1 mm Motor power: 7.5 kW Dimensions: approx. L 4.50 x W 1.80 x H 2.55 m Weight: approx. 5.8 t Equipment • Controlled back gauge 10 - 1500 mm • CNC control Multibend 9000, with 13" monitor, renewed • Automatic bending die adjustment • Gooseneck support rail, H = 150 mm, L = 3,200 mm, segmented • Bending rail 15 mm • Top bending rail, height 10 mm, L = 2,500 mm, segmented • Top bending rail, radius 17.5 mm, L = 2,500 mm, divided into 10 x 250 mm All information is subject to change without notice. Bwjdjzhm Nfspfx Afmsp A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 3 mm, overall weight: 15,000 kg, input voltage: 400 V, bending angle (max.): 180 °, working length: 3,200 mm, working range: 3,200 mm, Equipment: documentation/manual, safety light barrier, Technical features: Year 2013 Working length 3200 mm Bwjdpfxewq Rumo Afmop Maximum sheet thickness (iron 400 N/mm2) 3.00 mm Maximum sheet thickness (stainless steel) 2.00 mm Maximum sheet thickness (aluminum) 4.00 mm Maximum bending height on four sides 250 mm Upper jaw stroke 650 mm

Condition: like new (used), Year of construction: 1990, FEATURES Bwsdpev Ipgqsfx Afmjp Working length: 6 m Working thickness: 1.5 m Electric shear 6-fold program Manual stop stops Price on request

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, working width: 4,060 mm, overall weight: 5,300 kg, type of input current: three-phase, FEATURES Working length: 4060 mm Working thickness: 2.5 mm Rear table with spheres Bedpfx Aewb Ar Ssfmowp 155 additional tools to those present on the machine

Condition: like new (used), Year of construction: 2019, machine/vehicle number: A1912000000-1006, Year 2019 Bwodpfx Afoy Tap Sjmep Pneumatic forming machine with tooling

Condition: good (used), Year of construction: 2000, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Specifications : Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum thickness of sheet metal (stainless steel) 1.5 mm Maximum sheet metal thickness (aluminum) 3.0 mm Maximum development sheet width 1500 mm Bjdpfeqzibtex Afmewp Maximum four-sided fold height max * 203 mm Bending blade reach 180 degrees Machine width 5500 mm approx. Machine length 7000 mm approx. Machine height 2500 mm Total weight 21000 kg Power 18 kW Frequency 50 Hz Pressure 6 bar INCLUDED drag loading system

Condition: excellent (used), Year of construction: 2020, YEAR 2020 MODEL: TD 150 MAXIMUM CAPACITY: 1.50 mm (400 N/mm²) WORKING LENGTHS: 6.4 m DEPTH OF NOTCH: 1250 mm Bjdpfx Afjzcm Dmjmewp WIDTH OF BENDING BLADE: 10 mm + additional guide 10 mm MAXIMUM BENDING ANGLE: 143° BENDING ACCURACY: ± 0.5°

Condition: like new (used), Year of construction: 2020, Machine data: TD 150 – 6.4 m S5 with DFT® technology Working length: 6400 mm Insertion depth: 1250 mm Width of bending jaws: 10 mm + 10 mm additional bar Maximum bending capacity: S = 20 mm, 1.50 mm steel sheet (Re 275 N/mm²) Capacity for 180° bending: 50% of the maximum bending capacity Maximum bending angle: 143° (1.0 mm 135° / 1.5 mm 130°) Bending accuracy: +/- 0.5° (using crowning) Number of clamps / clamp stroke: 7 units / 15 mm - 1250 mm Maximum clamp opening: 35 mm Conical backgauge with adjustable depth: multi-zone function Number of backgauge fingers / stroke: 7 units / 5 mm - 1150 mm Backgauge tolerance range: +/- 0.1 mm per repeatability set Electrical voltage: 400 V / 50 Hz / 3 phases + PE Bjdpfszcyr Djx Afmjwp Rated current / protection / pump: 32 A / 63 A / 22 kW, 75 ccm Dimensions / weight: 8050 x 2250 x 2100 mm / approx. 10,000 kg

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Technical features: Maximum working length 2160 mm Bwjdpfx Afov A Tfgsmep Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum sheet thickness (stainless steel) 1.5 mm Maximum sheet thickness (aluminium) 3.0 mm Maximum sheet width of development 1500 mm Maximum height of bend on four sides max * 203 mm Bending blade action radius 180 degrees Machine width approx. 5500 mm Machine length approx. 7000 mm Machine height 2500 mm Total weight 20000 kg Power 25 kW Frequency 50 Hz Pressure 6 bar Loading system Blank Feeder with portal

Year of construction: 2020, condition: new, Lot of steel sheets in perfect condition. Total weight: 360T. Delivery on site. List of dimensions on request. Bedpfeurumasx Afmjwp

Condition: used, Year of construction: 2010, working width: 2,000 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness stainless steel (max.): 1 mm, sheet thickness aluminum (max.): 4 mm, overall weight: 2,030 kg, We offer this used Schechtl MAX 200/CNC S-10007 pivoting bending machine, manufactured in 2010. Manufacturer: Schechtl Model: MAX 200/CNC S-10007 Year of manufacture: 2010 Serial number: MA5726 Bjdpjzilx Ijfx Afmowp Sheet metal thickness capacity: 2.50 mm - Technical specifications: Bending length: 2,000 mm Steel: 2.5 mm Aluminum: 4.0 mm Stainless steel: 1.5 mm Weight: 2,030 kg If you have any questions or require further information, please feel free to send us a message or call us. “The machine is sold according to Incoterms® 2020 EXW [Frankenweg 2, 9100 Völkermarkt]. From the moment the machine is made available at the designated location, the buyer bears all costs and risks, including loading, transport, and customs formalities.”

Condition: good (used), Year of construction: 2011, Used deburring machine from TimeSavers with a return conveyor belt. Type 42-series-1350-RB Rotary brush deburring machine Width 1350 mm Equipped with a return conveyor belt to the operator Includes dust extraction system. Bodozhbigspfx Afmowp

Condition: good (used), Year of construction: 1975, working width: 3,100 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, back gauge: 700 mm, overall weight: 6,000 kg, total length: 3,400 mm, total width: 2,200 mm, total height: 1,800 mm, cutting length (max.): 3,100 mm, throat depth: 300 mm, Cutting length 3100 mm, cutting capacity 10 mm, motor 15 KW, working high 800 mm, back gauge 700 mm motorised, footpedal, 3 frontarms, fingerstop, pneumatic back support, cutting angle adjustable, dimension 3400x2200x1800 mm, weight ca. 6000 kgs Bwsdpsvvwdyofx Afmep

Condition: ready for operation (used), Uncoiler, Sheet Metal Decoiler, Used machine Manufacturer: GSW Schwabe AG Type: LHM 150/800 Bwedpsx Emdgofx Afmop Overall dimensions: 860 x 740 x 1430 mm Load capacity: 150 kg Sheet width: 150 mm

Condition: ready for operation (used), functionality: fully functional, Sheet straightening machine, 2100 mm,Sheet Metal Straightening, Plate Leveler Machine 2100 mm Used machine Maximum Sheet Width: 2100 mm (2100x8 mm) Maximum Sheet Thickness: 10 mm (1500x10 mm) Number of Rolls: 11 pcs Roll Diameter: 95 mm Bwodpfsv Tpv Njx Afmsp Electric Motor: Adjustable speed and direction Electrical Data: 400 V, 50 Hz, 36 A, 22.5 kW Includes a roller conveyor.

Condition: good (used), Max width: 1300 mm Number of rolls: 5 With shear Bwodpeflvf Aefx Afmep

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 121-C6218406, type of input current: three-phase, Finn-Power C6 — Turret Punch Press (2006) Bsdpfx Afoxb R Npjmjwp Automatic tool change High positioning accuracy Compatible with automation systems Suitable for serial production of metal parts

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: 204-10-2, Sales only within EU member states! No private sales. Bwjdpfozibtnox Afmop Any warranty is excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 1,500 mm, sheet thickness (max.): 60 mm, total length: 3,390 mm, total width: 1,480 mm, total height: 1,790 mm, workpiece weight (max.): 300 kg, overall weight: 2,800 kg, working height: 900 mm, input voltage: 400 V, warranty duration: 24 months, protection type (IP code): IP42, passage width: 1,500 mm, Equipment: double-sided, The SBM-L G1S2 EVO grinding and deburring machines were developed for deburring on both sides and edge rounding of workpieces in one operation. The LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts and stamped parts. The L series is equipped with three units each on the top and bottom. The processing of stainless steel, steel, aluminum or non-ferrous metal workpieces can be done either on the upper side, the lower side or on both sides. Two-sided sheet metal processing and edge rounding in one operation gives time savings of up to 60%. It is also possible to easily connect automation solutions or to integrate them into production lines. The machine concept ensures ergonomic operation and a pleasant working environment without pollution, dust and noise. working width max. 1000 / 1500 / 2000 mm workable material thickness - 0.5 - 60 mm load - 300 kg/rm voltage - 400 V / 50 Hz Bwedpfx Afsziar Aomop network structure - 3~ PEN / 3~ PE+N total current consumption - 43.7 A / 43.7 A / 43,7 A total power - 19.2 kW / 19.2 kW / 19.2 kW insulation class - IP 42 infinitely variable feed speed - 0-4 m/min. adjustment of material thickness - electric adjustment of tools - electric weight approx.2500 / 2800 /3200 kg dimensions (W/D/H ) approx 2890/1480/1790mm 3390/1480/1790mm 3890/1480/1790mm Double-sided deburring and edge rounding of punched, laser and plasma blanks More than 60% reduction in throughput time thanks to double-sided processing Up to 70% energy savings compared to conventional grinding/deburring machines LISA - The LISSMAC Set-Up Assist guides the operator automatically/without prior knowledge to the desired processing result 13.3" FullHD touch panel with intuitive operator guidance Simultaneous deburring and edge rounding on the external and exterior contours Double-sided processing eliminates costly material handling (e.g. turning of components) and time-consuming parts logistics One-sided machining possible by simply deactivating units (also for components that cannot be machined on conventional machines) Optimum tool utilisation across the entire working width due to transverse machining principle Quick and easy tool change within minutes with automatic reference run Maximum productivity with optimum and consistent machining quality Maximum productivity with optimum and consistent machining quality Small footprint due to compact design Modular and compact in modern machine design - smaller footprint Robust design and good accessibility reduce maintenance to a minimum Improved working environment due to reduced dust, dirt and noise levels

Condition: good (used), functionality: fully functional, load capacity: 3,000 kg, total length: 27,000 mm, total height: 3,000 mm, total width: 1,000 mm, The following storage shelves are for sale: 1. EUR 400.00 || 300 x (2x180 + 2x270) x 100cm (H/W/D) 2. EUR 400.00 || 300 x (3x270) x 100cm (H/W/D) 3. EUR 400.00 || 300 x (3x270) x 100cm (H/W/D) Bwjdpfjzh I H Ssx Afmjp 4. EUR 400.00 || 300 x (4x180) x 100cm (H/W/D) 5. EUR 400.00 || 300 x (1x180 + 3x270) x 100cm (H/W/D) 7. EUR 400.00 || 300 x (3x270) x 100cm (H/W/D) 8. EUR 400.00 || 300 x (4x260) x 100cm (H/W/D) Package price for all 7 shelves: EUR 2,200.00 The shelves have already been disassembled and are ready for pickup. Self-pickup only!