Deburring Machine

LISSMAC SBM-M 1500 B2

Year of construction: 2014, condition: ready for operation (used), A Lissmac steel brushing and deburring machine is available. Passage width: 1500mm, max. sheet thickness: 20mm, medium: brushing block, machine dimensions X/Y/Z: approx. 3100mm/1400mm/1800mm, weight: approx. 2300kg. Documentation available. On-site inspection is possible. Rbedpfx Ahowi Tntozet

Year of construction: 2015, condition: used, Dimensions (L/W/H) 700x655x1400 mm Rbjdpfxogr Rkxs Ahzet Filter capacity / m² Number of filters 1 St. Number of dust containers 1 St. Weight 140 kg

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, working width: 1,100 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, total length: 2,210 mm, total width: 1,530 mm, total height: 1,940 mm, overall weight: 1,200 kg, input voltage: 400 V, workpiece height (max.): 50 mm, power: 6 kW (8.16 HP), input current: 18 A, Edge rounding up to 1100mm width. Ideal for edge rounding of light burrs up to 1100 mm working width. The DM1100 C performs edge rounding and removes sharp edges on both the outer and inner contours of stainless steel, steel or aluminum parts that have been cut in either a laser, shearing or punching machine. Rjdpstzfntjfx Ahzjbt This machine processes parts of various dimensions, including products as small as 50x50mm. The DM1100 C has a station with double cross belts for edge rounding and leaves clean, smooth and burr-free edges on the complete parts. DM1100 C Working capacity (mm) 1100x50 No. of cross belt stations 1 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Cross conveyor motor (kW) (2x) 3 Feed motor (kW) 0.18 Total power (kW) 6 Power consumption (A) 18 Rod suction connection per head (Ø mm) 150 Dimensions (mm) 2213x1530x1940 Weight (kg) 1200

Year of construction: 1991, condition: good (used), machine/vehicle number: 07282, Offer 22336 Technical data: - max. working width 3030 mm - max. sheet thickness without bending 4 mm - max. sheet thickness with bending 3 mm - 3 driven rolls - roll diameter top / bottom 205 / 185 mm - working speed m/min - drive - brake motor 400 V / 7,5 kW - space requirement approx. W 5500 x D 1400 x H 1300 mm - weight approx. 4,7 t - with - bending - Rear roller inclinable, - hinged bearing for swinging out the top roller - extended roller ends for mounting of profile rollers Rbodpfxsmdqllo Ahzet - right + left rotation - separate control panel

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Rbjdpfx Ahsd Ixadezst Abrasive belt, dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Weight (kg) 5000

Condition: good (used), Year of construction: 2000, machine/vehicle number: 13639, Control Heidenhain X-Way 1,200 mm Y-way 800 mm Z-way 500 mm Main spindle: Speed 16,000 rpm Drive power - main spindle 17 kW Spindle Tool holder Type HSK63 Spindle diameter in front. Bearing 70 mm Upgraded Tool changer Size: 100 Swing round table: Round table diameter 800 mm Swivel range A: -15 / + 97° rotatable C: 360° max. table load approx. 1,000 kg max. tool diameter 80 mm max. tool byway. with free neighbor box. 125 mm max. tool length 300 mm max. tool weight 8 kg Feeds: Rapid response ( X / Y / Z ) 30 m/min Total power requirement 31 kVA Machine weight 15 tons Rodpfxsinh Rqs Ahzjbt Space requirements approx. 6.0 x 5.0 x 3.6 m other equipment - Documentation - Chip conveyors - electronic heat compensation Y- + Z-axis

Condition: good (used), Year of construction: 2009, functionality: fully functional, Weight 4950 kg, total weight 12000 kg 5.5 kW Rodpfx Aswpmckohzebt

Condition: new, functionality: fully functional, Year of construction: 2025, Box Type Electrostatic Powder Coating Oven: Length: 500cm, Width: 250cm, Height: 300cm Rbedsv Nvndjpfx Ahzjt - Powder Coating Booth with Filter: Length:300cm, Width:220cm, Height:270cm - Electrostatic Powder Coating Equipment: Model: HMK MULTICOLOR, Type of Use: Manual

Condition: new, Metal Deburring and Edge Rounding Machine (Double Side). DM1100 2C, edge rounds top and bottom sides of metal parts in one single pass. This double sided operation machine deburrs metal sheets rounding its internal and external contours. Featuring 2 sets of double cross belts this machine removes sharp edges on stainless steel, steel and aluminum parts cut by laser, punching or shearing. This metal deburring machine can easily edge round parts with small dimensions, being capable of deburring different shapes and parts sizes from 50mm up to 1100mm. Processes simultaneously both sides of metal sheet parts cut by laser or punching machine, saving time and reducing operation costs. Additional conveyor belt and support table enables single side edge rounding of metal parts down to 50x50mm. DM1100 2C can edge round metal parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Easy and tool free cross belt replacement. Program for automatic positioning of upper and lower cross belts in order to improve the access, reducing replacement procedure time. High performance on all edges and also on internal holes. Easy to use with an integrated touch screen for monitoring the working settings and the machine alarms. Technical Details: Working capacity (mm) 1100x50 No. Cross belt stations 2 Cross belt speed (m/s) 2-8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) (4x) 3 Feeding motor (kW) (3x) 0.18 Total power (kw) 13.1 Consumption (A) 30 Dust extraction connection (Ø mm) 150 Rbjdped Ev Upefx Ahzet Dimensions (mm) 2560x1980x2150 Weight (kg) 2210

Condition: used, Year of construction: 1992, Technical details: lifting capacity: 10 t span width: 21000 mm stroke speed: 6,3 m/min. precise lift: 1,0 m/min Redpfsv N Ib Nox Ahzebt rope diameter: 14 mm connected load: 15,5 kW SINGLE GIRDER SUSPENSION CRANE Crane classification according to DIN 15018H2 B3 Crane trolley: designation RF 400; type KBF 112 A8/2, travel speed 12,5 / 50,0 m/min. and type KBF 80 A4, travel speed 2,5 m/min. Size of travel wheels Ø 200mm (16 pieces) trolley main hoist EKDH 525 H20 KV3-4/1 F6; type KBF 80 A8/2; speed 20,0 / 5,0 m/min.; size of travel wheels Ø 160mm (4 pieces) Hoisting gear: type KBH 160 B2/12; lifting height 10.000 mm; braked with sliding runner; lifting speed (main stroke 6,3 m/min. and fine stroke 1,0 m/min.) Single hook size 5.0 rope Ø 14mm; rope length 46m; drive group FEM 1 Am Operation via pushbutton pendant control with DST Special feature: crossover piece with interlock and stitch tracks Es stehen weitere Brückenkrane mit der Spannweite 21 Meter zum Verkauf. *