Used Deburring Machine for sale (63,949)

Condition: good (used), Year of construction: 2017, Used deburring machine from Costa Deburring, small radius grinding and finishing in a single pass – both top and bottom! Type: MB4 CV+CV 1350 Grinding width: 1350 mm 4 units for top and bottom in one pass Includes spare parts Year of manufacture: 2017 Gboljyillgohccqkjh Hakon wet filter system

Condition: used, Year of construction: 1986, working width 50 mm Gbjlhccqsvn Al Tskeh wheel diameter 250 mm grinding wheel width max. 40 mm turning speed range 1500 + 3000 U/min total power requirement 1,0 / 1,4 kW weight of the machine ca. 100 t dimensions of the machine ca. 0,65 x 0,45 x 1,15 m Deburring machine for deburring sheet metal or flat material, this machine is equipped with grinding wheels but can also be operated with brushes, 2-stage motor, base cabinet with rollers. Machine dealer with own stock of 1600 m².

Condition: new, filling capacity 300 kg max. workpiece height 500 x 200 x 20 mm workpiece weight total 200 kg max. workpiece weight 15 kg / Stck. revolutions per minute 22 U/min filling amount 40-50 % Colour blau 5015 RAL 0 625 x 270 mm total power requirement 1,5 kW weight of the machine ca. 650 kg Gbslhcsu Uu T Rscqksh range L-W-H 1 x 1,7 x 1,29 mm New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is included in the price). This are available from Sideros. Sideros ECO dust extraction available at extra cost. The manufacturer recommends taking 100 kg samples of the material to be deburred to be sent to the factory in Italy for test purposes before ordering. Machine dealer with own stock of 1600 m².

Condition: new, filling capacity 750 kg max. workpiece height 900 x 300 mm workpiece weight total 550 kg max. workpiece weight 30 kg / Stck. revolutions per minute 22 U/min filling amount 50-60 % Colour blau 5015 RAL 0 1775 x 440 mm total power requirement 3 kW weight of the machine ca. 1995 kg dimensions of the machine ca. 2,9 x 1,33 x 1,75 m New deburring machine for safe and to efficiently deburr workpieces. Suitable Gbjlhccevv H Tdoqksh for heavy applications. The EVO model is available for light to medium workpieces. 6 - square drum lined with durable, vulcanized rubber thickness 36 mm, locking cover with gas pressure springs, roller shutters to protect againstthe rotating Container, stable design, easy operation. Control by timer on control surface, main and emergency stop switch. The maximum fillingquantity is 40% of the container volume and corresponds to 800 kg consisting of 500 kg workpieces + 300 kg deburring medium = hard manganese balls pic 6 or cast iron pentagons pic 7. These are over Sideros available. Stepless speed adjustment via frequency converter approx. 13-22 rpm (2850,-- €) Soundproof housing (65/70 Db) photo 7 and Sideros ECO B2 dust extraction against Available at extra cost. For complicated workpieces, the manufacturer recommends 100 kg sample parts of the material to be deburred to the factory for testing before ordering. VIDEO on our website. Machine dealer with own stock of 1600 m².

Condition: new, filling capacity 300 kg max. workpiece height 500 x 200 x 20 mm workpiece weight total 200 kg max. workpiece weight 15 kg / Stck. revolutions per minute 22 U/min filling amount 40-50 % Colour blau 5015 RAL 0 624 x 270 mm total power requirement 1,5 kW weight of the machine ca. 650 kg New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is included in the price). This are available from Sideros. Sideros ECO dust extraction available at extra cost. The manufacturer recommends taking 100 kg samples of the material to be deburred to be sent to the factory in Italy for test purposes before ordering. Machine dealer with own stock of 1600 m². Gjlhcet U R Swecqkobh

Condition: refurbished (used), Year of construction: 2009, used Timesavers model 22-Series-900-WB with wet extraction Technical data: Year of manufacture: 2009 Machine is completely overhauled – New conveyor belt – New rotary brush Working width: 900 mm Abrasive belt dimensions (W x L): 1900 x 930 mm Machine built in accordance with CE Main switch, emergency stops Disc brake Gbelhccqoxc H Rfokeh Electrical specifications: Power: 28.05 kW Electrical connections: 3-phase Voltage: 400 V Current: 55 A Frequency: 50 Hz Unit 1: Contact roller unit, Ø150 mm Contact roller 45° Shore Fine adjustment Dial gauge on contact roller Rotational alignment with feed Main motor 7.5 / 15 kW Oscillation Unit 2: Brush unit Brush Ø200 mm “Clean-Strip” 17CS02 polish no. 6 2 directions of rotation Dial gauge Fine adjustment Oscillation Motor 11 kW

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 1,100 mm, type of input current: three-phase, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness copper (max.): 50 mm, sheet thickness brass (max.): 50 mm, total length: 2,000 mm, total width: 2,590 mm, total height: 2,150 mm, overall weight: 2,500 kg, input voltage: 400 V, warranty duration: 12 months, pass-through width: 1,100 mm, table width: 1,100 mm, workpiece height (max.): 50 mm, power: 13 kW (17.68 HP), workpiece width (max.): 1,100 mm, DM1100 2C Gbjlhccsyiyhlsqkeh Working capacity (mm): 1100×50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2-8 Feed speed (m/s): 0.6-3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13 Current consumption (A): 30 Dust extraction port per head (Ø mm): 220 Dimensions (mm): 2000X2590x2150 Weight (kg): 2470

Condition: excellent (used), max. wheel diameter 600 mm gear width 250 mm max. module 10 min. module 1 weight of the machine ca. 0,9 t dimensions of the machine ca. 1,8 x 1,4 x 1,4 m Gelhccjx N Nc Toqkobh

Condition: used, Technical details: Gbslhccqswiu Smskeh Weight: ca. 80 kg dimension machine xH: ca. 077 x 0,45 x 0,5 m BRUSH MACHINE *

Condition: used, Year of construction: 2025, max. working width: 1350 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Grinding belt dimensions: 1910 x 1350 mm Sand rolling brush size: 300 x 400 mm Sandbelt line speed: 12 m / s Number of roller-brush planetary revolution shaft heads: 8 pcs. Rolling bruh rotation speed: 8-26 m / s Rolling brush public speed: 1-15 rpm machine thickness servo adjustment precision: 0,01 mm Length: 3800 mm Width: 2300 mm Height: 2400 mm Machine weight: 5500 kg Electrical connected load: 49,5 kW Standard configuration Machine configuration:2 or 3 station variants possible:1st station: Sanding belt2nd station: Brush elementsOptional 3rd station: Sanding belt or polishing station Main components:PLC: SiemensTouchscreen: SiemensLow-voltage devices: SchneiderFrequency converter: SchneiderSuction fan: Elektror, Germany Total connected load:Sanding belt motor: 15 kWBrush motor: 11 kWInfeed belt motor: 4 kWVacuum suction motor: 15 kWFrequency converter for rotating brushes: 15 kW Machine with wet vacuum cleaner Extended machine accessories Gbslhcjygx A Njcqksh

Condition: used, Year of construction: 2026, max. working width: 1330 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Grinding belt dimensions: 1910 x 1350 mm Sand rolling brush size: 300 x 400 mm Sandbelt line speed: 18 m / s Number of roller-brush planetary revolution shaft heads: 8 pcs. machine thickness servo adjustment precision: 0,01 mm Length: 4200 mm Width: 2300 mm Height: 2400 mm Machine weight: 6500 kg Electrical connected load: 89 kW Standard configuration Golhccqjygx A Ajkobh Machine configuration:1st station: Sanding belt2nd station: Brush elementsOptional 3rd station: Sanding belt or polishing station Main components:PLC: SiemensTouchscreen: SiemensLow-voltage devices: SchneiderFrequency converter: SchneiderSuction fan: Elektror, Germany Machine with wet vacuum cleaner Extended machine accessories

Year of construction: 2010, condition: ready for operation (used), Connected load: 8kW, weight: 2.2t, with control cabinet. Gbjlhccqeilht Ujkjh

Year of construction: 2014, condition: ready for operation (used), A deburring system (deburring cell) is available for post-processing metal workpieces using a plastering robot. Documentation available. On-site inspection is possible. Gelhccswfg Husqksbh

Year of construction: 2016, condition: ready for operation (used), A specially built Eiberle reaming machine for pipe blanks is available. Stations: 4, cycle time: 3-5min, machine dimensions X/Y/Z: approx. 3900mm/1050mm/1900mm, weight: approx. 1500kg, control: Siemens, part counter: 40317, including a comprehensive tool package. Documentation available. On-site inspection is possible. Gbslhccqsv Sufyskoh

Year of construction: 2007, condition: ready for operation (used), A deburring machine with extraction is available. Passage width: 1000mm, sheet thickness: 20mm, minimum sheet size X/Y: 150mm/100mm, sound power level: 82dB(A), feed rate: 4m/min, dimensions X/Y/Z: approx. 2200mm/1500mm/1500mm, weight: approx. 1600kg, operating hours: 7152h. Including P. Ries 330 D Lissmac extraction unit, year of construction: 2007, filter area: 10m², air volume: 3300m³/h, negative pressure: 33mbar. Documentation available. Golhccetul N Doqkjbh

Year of construction: 2007, condition: used, work piece width 900 mm Gelhccqjyh Rndjkobh workpiece height max. 40 mm workpiece length 0 mm total power requirement 35 kW weight of the machine ca. 3,7 kg Dimensions (LxWxH) 6,0 x 2,35 x 2,2 0 Sheet metal deburring machine - ESA touch panel - incl. turbo separator - incl. 3m infeed table - Spare belts - Documentation

Condition: used, Wide belt sander used Make:TimeSaver Series WRB Machine-No. 2480-19 Dry processing deburring/rounding machine machine with contact rollers and a rotating brush unit Max. Working width 1350 mm Sanding belt dimensions WxL 1350x1900 mm Outer brush diameter 530x350 mm Table opening 0.8-100 mm Min. part size 50x50 mm Brush speed 6-17 m/sec. Sanding belt speed 11 m/sec Feed speed 0.2-8 mm Power consumption W 1 unit - 11.0 kW RB unit 1.5 kW Brushes 4x1.5 kW Connection: 400 V 50 Hz Compressed air required 6 bar Total consumption 25 ltr/min. incl. ceramic brush set R plus 350x530 mm and zirconium brush set grain 180 Machine has been completely overhauled New transport mat installed Area of application: Sanding belt rolling unit W: Pre-deburring with sanding belt or Scotch- Bride belt Removal of raised burrs Apply a sanding finish or brush finish, Repair a sanding finish or brush finish RB unit: Deburring and rounding of flat and profiled and profiled parts Goleudb R Ishccqkebh Weight: 6200 kg

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, grinding length: 700 mm, grinding width: 550 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 475 mm, TECHNICAL DETAILS X-axis travel: 500 mm Y-axis travel: 300 mm Z-axis travel: 475 mm Manual grinding area Length: 700 mm Width: 550 mm Height: 400 mm Automatic grinding area Gbelhccoyf Ahmjqkjh Length: 700 mm Width: 470 mm Height: 400 mm Table size: 1,100 x 500 mm Maximum workpiece height: 400 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,960 x 2,550 mm Machine weight: 3,300 kg EQUIPMENT Operating manual

Condition: new, Year of construction: 2025, machine/vehicle number: ZGS200, 200 l Capacity * 7.5 kW high-performance three-phase drive motor. * Adjustable speed control up to 300 rpm. Gbjlhjw Hb Tfjccqkoh * Control panel and dosing pump included. - The dosing pump automatically adds the chemical to the tank * Working hours timer * PLC panel programmable on request * PU or INOX plate * Replaceable valve for wastewater drainage. * Inner tank features channels and cavities to ensure a non-stick wall.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 84659300, Machine consists of 3 working units: 1st. XSV Brushes (12 rotating and oscillating brushes) 2nd XSV Brushes (12 rotating and oscillating brushes) Golexn Ifuehccqkobh 3rd Roller brush Feeding belt 1350 mm.

Condition: good (used), Year of construction: 2011, Edging and contouring - deburring machine Gbjlhccewnpfleqkjh ROLEI Type: 00645-KKE2 Year: 2011.

Condition: used, Year of construction: 2012, max. working width: 1000 mm workable material thickness: 0,5 - 50 mm Total power: 82 A Total current consumption: 44,5 kW Insulation class: IP 42 Infinitely variable feed speed: 0-4 m / min Adjustment of material thickness: elektrisch Adjustment of tools: elektrisch Length: 3100 mm Gjlhccqsyduxzokjbh Width: 2100 mm Height: 2000 mm Machine weight: 3800 kg Standard configuration SBM-M D 1000:Two-side slag removal of plasma and thermal cut sheets up to 120 mmSaving of tool costs incurred by mechanical deslagging –no time-consuming and expensive grindingTwo-side slag removal saves the time intensive turning of the often very heavy workpieces or machining of parts twiceUp to 60 % work time savings compared to one-side processing machinesModular and compact in modern machine design - smaller footprintDry operationThe cross-machining principle guarantees uniform tool utilisation over the entire working er and lower assemblies separated can be adjusted or turned on and off electricallyInnovative tooling and material feed system allows for optimum handling of burrs and uneven surface of piecesMaximum productivity while maintaining machining qualityImproved work environment - Reduction of dust, dirt and noiseOptionally available: Conveyor Systems; Material Handling; Robotics & Automation; Processing Tools SBM-XL 1000:Deburring and edge rounding of parts up to 120 mm material thicknessProcessing both sides of the parts simultaneously eliminates the need of turning heavy parts and processing them for a second timeSimultaneous deburring and edge rounding on interior and exterior contoursDry operationSimple, intuitive operationThe processing units can be individually adjusted or turned on and off imum productivity while maintaining machining qualityThe cross-machining principle guarantees optimum tool utilisation over the entire working ter and simpler tool change within just a few minutesModular and compact in modern machine design - smaller footprintImproved work environment - Reduction of dust, dirt and noiseOptionally available: Conveyor Technology; Handling Systems, Automation; Custom SolutionsFor repeated customer requirements, processing parameters can be called up quickly and easily through predefined to 60 % work time savings compared to one-side processing grinding machines Extended machine accessories - 2 x dust extractor - 2 x conveyor belt

Condition: repair required (used), Year of construction: 2015, functionality: not functional, LISSMAC Deburring Machine SMD 525 with Dedusting System We urgently need to free up space in our workshop and are therefore selling our LISSMAC deburring machine, complete with extraction system. We are open to significant price negotiations in case of quick collection. TECHNICAL DATA: - Manufacturer: LISSMAC Maschinenbau GmbH - Model: SMD 525 - Article number: 070104070 - Year of manufacture: 2015 - Connection: 400V three-phase current - Includes DDE 5500 dedusting unit - Complete extraction system with filter tower - Weight: approx. 900–1,400 kg CONDITION: Gbolhceyg Hntecqkeh Display defective. The machine was previously operational but has been idle for several months. Sold as is, without any warranty. Location: Remscheid Self-collection – forklift available

Condition: good (used), Year of construction: 1994, Speed: 1500 / 3000 rpm Gjlhsydl Aksccqkjbh Connected load: 2.4 / 3.7 kW Space requirement: approx. 1.0 x 0.5 x 1.2 m (L x W x H)

Condition: new, Year of construction: 2025, -TFON Edge Rounding & Surface Processing System Designed for superior versatility and precision, this system is engineered to process mild steel, aluminum, and stainless steel materials with thicknesses from 0 to 120 mm. It offers advanced edge rounding and surface cleaning capabilities tailored to demanding industrial applications -Material Compatibility -Mild Steel, Aluminum, Stainless Steel -Working Thickness Range -0 – 120 mm Edge Rounding: Radius 2 edge rounding for smooth, safe edges that enhance both aesthetics and functionality Precision Control: Integrated Siemens automation system delivers accurate, consistent control throughout processing. Independent Processing Stations: Multiple stations allow simultaneous or sequential processing, offering flexible workflow configurations. Table Size Options: Available with 650 mm, 1000 mm, or 1300 mm working widths to suit diverse production requirements. Table Types: Magnetic, vacuum, or magnetic-vacuum tables provide secure, adaptable support for various materials and part sizes. Plasma & Oxygen Technology: Advanced plasma and oxygen systems efficiently remove heavy burrs and dross after cutting, ensuring cleaner surfaces. Surface Purification: Effectively eliminates dirt, rust, oxide, and scale, preparing parts for subsequent processing such as welding or coating Gbjlei E Tkaohccqkjh Edge Rounding for Coating: Produces uniform, defect-free edges ideal for painting and coating applications. Industry Applications: Steel Service Centers, Energy, Mining, Construction, Automotive — engineered for heavy-duty, high-performance use. Uniform Edge Results: 8 flap wheels work together to deliver consistent radius edges on every part. Pneumatic Oscillation System: Extends abrasive band life and maintains consistent performance by reducing wear through pneumatic oscillation. Engineered for industrial precision. Built for durability. Designed for versatile applications. TFON – Excellence in Edge Processing and Surface Preparation.