Used sand blasting equipment for sale (151)

Condition: new, Receiver capacity 80 l working pressure 4 - 8 bar Air consumption 250 - 800 l/min. weight of the machine ca. 36 Kg 1020 x 460 x 520 mm Mobile jet unit with extraction Consisting of: microfilter Boiler 80 liters Blasting gun with 2.5m supply hose Djdpfx Ahof Nb Eus Iekn

Condition: new, Year of construction: 2025, sandblasting containers allow flexible blasting in closed rooms at any location where it is required. 8,89 x 2,35 x 2,69 m A closed sandblasting grit circulation using an integrated flat conveyor Dksdofnh Rwopfx Ah Ien or screw conveyor floor, or via side-mounted recirculation channels, with optimal preparation of each blasting grit, ensures effective exploitation of the grit.Depending on the container size and required area output, one or more free jet pressure blowers can be used. The blasting nozzles of our tried and tested free jet pressure blowers are manually guided. Our free jet pressure blowers can be fitted with an automatic refilling system to ensure continuous operation without interruption for the blaster.

Condition: new, Year of construction: 2025, sandblasting containers allow flexible blasting in closed with extension modules each 1m rooms at any location where it is required. 6,60 x 2,99 x 3,5 m Dkodpfx Ahofnh Rze Ien A closed sandblasting grit circulation using an integrated flat conveyor or screw conveyor floor, or via side-mounted recirculation channels, with optimal preparation of each blasting grit, ensures effective exploitation of the grit.Depending on the container size and required area output, one or more free jet pressure blowers can be used. The blasting nozzles of our tried and tested free jet pressure blowers are manually guided. Our free jet pressure blowers can be fitted with an automatic refilling system to ensure continuous operation without interruption for the blaster.

Condition: new, Year of construction: 2025, Blasting container for blasting glass beads and ceramic balls with drum magnetic separator and stainless steel grating floor. Inner dimensions L=5850 W= 2300. Side Door Open for easy loading with the forklift. Dkedpfxeg S Rt Ts Ah Ion

Condition: new, Year of construction: 2025, Dump belt blast wheel blast machine 11 kW direct drive indexing turbine with 8 throwing blades. Belt width 1000mm and Ø900mm Dodpfx Ashvikueh Iekn

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Dkjdpfewc Ri Ijx Ah Isn Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. Dkodpewc Nrnofx Ah Ien The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: new, SAPI high-performance injector blasting cabinet type "T-Rex 140 Double-Power" with integrated cartridge filter system. Combines pressure blasting and injector blasting in one blasting system. A blasting cabinet for all applications! The "T-Rex 140 Double-Power" pressure/injector blasting cabinet can be used either in pressure blasting or injector blasting mode. This allows for even the most difficult blasting work to be carried out. The also integrated injector blasting mode can be used for lighter blasting tasks, saving on expensive compressed air. The blasting mode (pressure blasting or injector blasting) is easily selected using a selector switch on the cabinet base. The compact, combined pressure/injector blasting cabinet has an integrated cartridge filter extraction system. Thanks to the permanently installed filter system, the sandblasting cabinet requires little space and is easily transported using a pallet truck or forklift. The compact design of the blasting cabinet makes it ready for immediate use; all that's required is to connect the compressed air and power supplies and fill it with abrasive. The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber. At the same time, optimal abrasive cleaning is achieved, allowing the blasting material to be reused as often as possible. The use of state-of-the-art fan technology results in an extremely low power consumption (0.75 kW), making the injector blasting cabinet extremely economical. Our high-performance injector blasting head (fresh blasting head) creates a high negative pressure and thus achieves high blasting performance, enabling fast, economical work with the vacuum blasting cabinet. The blasting nozzle is made of boron carbide and achieves extremely long service life, even when using corundum blasting media. The pressure blasting head is also equipped with a boron carbide blasting nozzle for maximum service life. Dkjdpfx Asupzmujh Isn A modern, energy-saving LED light is mounted on the cabin roof, protected from dust, to illuminate the blasting chamber. This ensures optimal illumination of the blasting chamber and enables fast, fatigue-free, and economical work. Our sandblasting cabinets are constructed from sturdy sheet steel, allowing for a high load-bearing capacity of the work grid. All SAPI blasting cabinets comply with all current safety standards and are equipped with a door safety switch that immediately stops the blasting process if the cabinet is opened during blasting. Metal blasting media, cast steel, steel grit, chilled cast iron, stainless steel blasting media, corundum, glass beads, plastic granules, vegetable granules, etc. can be used as blasting media.

Condition: new, Basic TWO Blasting Container – A New Standard in Sandblasting Introducing the SAPI Basic TWO Blasting Container—a true milestone in the sandblasting industry, designed with dual-container space to maximize functionality and efficiency. With its spacious layout and innovative features, this advanced sandblasting solution is perfect for professionals who need more room for their work without compromising on quality and performance. The Ideal Solution for Maximum Efficiency For companies seeking a comprehensive, practical, and high-quality sandblasting solution, the SAPI Basic TWO Blasting Container is the perfect choice. With its exceptional features and thoughtful design, it raises productivity and quality to a new level in the sandblasting industry. More Than Just a Container – A Complete Professional Solution The SAPI Basic TWO Blasting Container offers the perfect balance of space, functionality, and cutting-edge technology. Thanks to its innovative design and premium features, it is not just a simple container—it’s a fully operational solution that takes sandblasting to the next level of efficiency, effectiveness, and safety. Whether for large-scale projects with demanding requirements or precise detail work, this system provides the space, tools, and technology needed to complete the job efficiently, safely, and professionally. Key Features Dkedpfx Ahjupzt Us Ien ✔ Spacious Blasting Area & Technical Room – The dual-container design provides ample workspace for sandblasting while ensuring a separate technical room for optimized workflow and easy equipment access. ✔ Plug-and-Play Convenience – The SAPI Basic TWO Blasting Container is designed for ease of use, requiring minimal setup so you can start blasting immediately. ✔ Enhanced Air Quality – Equipped with the SAPI Air Filter, the container ensures a cleaner and healthier work environment by effectively controlling dust and airborne particles. ✔ Dual Cleaning Modes with 5kW Abrasive Vacuum Turbo Cleaner – Efficient handling of abrasive recovery and cleaning with two modes for maximum flexibility and control during operation. ✔ Durable, Rubber-Coated Walls – The interior walls are lined with heavy-duty rubber, ensuring resistance to intensive sandblasting operations while extending the lifespan of the workspace. ✔ Bright & Well-Lit Work Areas – Three high-powered LED lights are strategically placed to provide optimal visibility, ensuring precision and safety during sandblasting. ✔ Robust Premium 200-Liter Sandblasting System with Cyclone Cleaning – The powerful 200-liter system enables efficient and continuous blasting, while the integrated cyclone cleaning system improves abrasive quality, reduces waste, and boosts productivity. Blasting Room Dimensions ✔ Depth: 4.40 m ✔ Total Width: 2.25 m ✔ Total Height: 2.65 m

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 20.10.09 with carriage and turntable. width: 2050mm depth: 935mm height: 955mm Pneumatic lifting door with the advantage that the abrasive falls into the cabin when opening the door and not on the floor. If you have any questions about technical specifications etc. please contact us in writing or by telephone. The basis of the machines is the production at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with the well-known contacts of many years. Dkjdsfnh Rvopfx Ah Isn

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 11.11.30. Blasting chamber W=1050 D=1050 H=955mm. 1 TÜV-tested pressure vessel 30l with conical outlet funnel. 1 blasting medium dosing valve with blasting medium quantity regulation pneumatically controlled. 1 built-in closing cone with guide tube. 1 compressed air connection with pneumat. Shut-off valve and branch for control air. 1 pressure regulator to adjust the blasting pressure. 1 blasting hose DN19. 1 handpiece with boron carbide blasting nozzle Venturi 8mm. 1 pair of blasting gloves. Electrical height adjustment of the cabin for body-friendly posture. Memory position storage for 3 heights. Dust extraction filter 2000m³/h 2,2kW. Dkjdoga Ehbopfx Ah Isn

Condition: new, Year of construction: 2025, Bam house 7x4.5m with suction floor for mineral blasting agents (glass, ceramics, corund, grenade sand our.). Magnetic separator, cyclone, treatment, material bunker, Radiant refill, free-beam pressure blower, filter system with cleaning. Lining the walls with 4mm fabric gum. Ceiling flap for crane loading. For questions about technical specifications, etc., please contact us in writing or by phone. Dksdpfx Asd Naafoh Ien The basis of the machines is the production at the Grossenlueder site since 1971. Harth & Seifert-Georg Fischer-Schiffmann and Seidl-Oliver Fritz GmbH & Co. Kg with the long-time known contacts

Condition: new, Year of construction: 2025, Blast room 12x5m with blasting carriage and flat conveyor floor. Flat conveyor floor, screw trench, bucket elevator, magnetic separator, reprocessing unit, material bunker, blasting media refilling, free jet pressure blower, filter system with self-cleaning. Wall lining with 4mm fabric-reinforced rubber. For questions regarding technical specifications, please contact us in writing or by telephone. The machines have been produced at our Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann and Seidl - Oliver Fritz GmbH & Co. KG with their long-standing, well-known contacts. Dkjdpfx Aedhlikoh Ion

Condition: new, Year of construction: 2025, 2 pieces high performance centrifugal wheel Ø380 11kW. High flexibility by clockwise and counterclockwise rotation distinguishes our centrifugal wheel. Our double disc turbine stands for a stronger bundled hotspot and more efficient blasting. The replacement of the 8 throwing blades and the inner lining is easy and without special tools, without disassembling the turbine wheel. All wear parts are made of high quality materials for long life. A It forms the heart of the blast machine: the efficiency and economy of the blast machine are decisively influenced by the efficiency of the centrifugal blast system. efficiency and economy of the blast machine are decisively influenced by the efficiency of the blast wheel. The blast wheel is directly driven and 4-8 blades depending on the diameter (Ø240 4 blades, Ø380-500 8 blades). The high efficiency and maximum utilization of the energy used is thus guaranteed at all times. Dkodpfehvmkxsx Ah Ien We will be glad to advise you!

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 4,000 mm, inner dimension length: 6,000 mm, inner dimension height: 3,000 mm, filter area: 99 m², volume flow: 7 m³/h, Equipment: documentation/manual, lighting, Blasting house for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Djdpfx Ahsu A A Tke Ijkn Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Warranty up to 5 years on various components. 50 years of experience and more than 3000 systems in blasting machine construction

Condition: used, Year of construction: 2019, machine/vehicle number: F 2019-1300-336, Ref. No. 25243 Djdpjwy Ukwefx Ah Iekn Technical Data: - Applications: - Demoulding blasting, electrode manufacturing, surface priming; - Surface texturing using rapid tooling technology, cleaning blasting (soft blasting) - Negative pressure cabin with viewing window and motorized tilting hood - Tilting hood motorized up to 90° - Blasting chamber accessible manually via two work gloves - Blasting gun - Turntable made of steel, manually rotatable, 1000 mm - Internal blasting chamber height: 500 / 840 mm - Internal blasting chamber width & depth: 1100 mm - Abrasive drying system, electronically and steplessly adjustable - Dust extraction unit: Microfilter unit type IMF-2 - Compressed air connection up to 10 bar - Drive: 400 V / 2.9 kW - Space requirements: approx. W 1400 x H 2300 x D 3100 mm - Weight: approx. 900 kg - Separate work platform with stairs: W 1400 x H 1300 x D 1300 mm - Recorded operating hours: 52 h - Operating manual

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks Dodpfxexqzmke Ah Ijkn - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Dkjdpjw Ivrkjfx Ah Ien Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9% Dkjdpfx Ahew Ivrws Ien

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate Dkjdpfx Ahewc Rk Es Ion 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Year of construction: 2025, Innovative dust-free sandblasters combine the power of conventional sandblasting with a vacuum system that captures all dust and removed material during work. This not only eliminates the need for extensive cleanup work, but also protects the operator and those around them from the harmful effects of airborne particles. With a dust-free sandblaster, you can complete cleaning and surface preparation faster and more efficiently. Thanks to the intuitive controls and user-friendly design, these machines are easy to operate, even for sandblasting beginners. ✅ DINO II & DINO MASTER Available in 60 and 100 liter versions The SAPI pressure-return sandblaster "DINO" is a compact and universally applicable device. It is characterized by its robust construction and mobility. The blasting performance depends on various factors such as surface condition, compressor capacity, type of blasting media, etc. The cleaning performance is 3 - 10 m² / hour. Dkedpfx Ahowc Rg Hs Ijn Overall, this device provides the worker with a clean working environment, low abrasive consumption (thanks to the suction unit), and lower waste disposal costs. The device is used in the steel, shipbuilding, and petroleum industries, as well as for maintenance work in the construction sector, by stonemasons, and others.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, We offer a drum blaster with a rubber belt - COGEIM TG1, a device with a magnetic separator. Year of manufacture - 2015. Total height - 4595 mm. Dkodjwt T T Rjpfx Ah Ijn Drum diameter - 700 mm. Drum working load - 200 kg. Turbine power - 5.5 kW. Automatic filter. Number of hours worked - 10500. The machine can be controlled manually and automatically. Complete documentation for the machine. Blaster, blasting, sandblasting, blasting, sandblasting, sandblasting, shot blasting.

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Dkjdjwc Afhopfx Ah Ijn Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: new, Year of construction: 2025, functionality: fully functional, Our SAPI Blasting Halls SAPI sandblasting halls and systems with 50 years of tradition and proven quality. Sandblasting halls are designed for industrial and commercial use, providing a safe environment for all types of blasting work. They include a blasting room, an abrasive recovery system with a filter and dust extraction system, lighting, and safety features to ensure the safety of the operator. Recovery System Our recovery system collects, separates, and reuses the abrasive material, which reduces costs and environmental impact. Ventilation and filtration systems ensure that the air in the hall remains clean. Adequate lighting ensures optimal visibility for the operator. Key Components of Our SAPI Sandblasting Halls: ✅ Blasting Room: The central area where the actual sandblasting takes place. 🌬️ Ventilation and Filtration Systems: Reduce dust levels and ensure optimal visibility. 🔄 SAPI Recovery System: Recycles the abrasive material and reduces costs and environmental impact. 💡 Lighting: Ensures optimal visibility for safe operation. 🦺 Safety Features: Emergency shutdown, fire protection, and protective gear like helmets, overalls, and gloves. ⚙️ Control Panel: The control center that integrates all electrical components. Dkedeun R N Aspfx Ah Ien 🗑️ Dust Collection Container: Collects fine abrasive material for easy disposal. 🛠️ Compressor: Powerful compressor for the compressed air supply. 💪 Mammut Sandblasting System: Designed for tough industrial use. Reasons to Choose Our Sandblasting Halls: ✅ High Efficiency: Increases productivity and reduces operating costs. 🛡️ Safe and Clean Environment: Minimizes environmental impact and ensures a safe working environment. ⚙️ Customizable Solutions: Tailored solutions for optimal performance. 🔧 High-Quality Components: Durable components that reduce maintenance needs. 🛠️ Support and Service: Expert support for quick problem-solving. 🌱 Environmental Responsibility: Reduces waste and environmental impact. The SAPI Flat Conveyor System: The abrasive material is processed by our efficient abrasive cleaner, which separates contaminants. The system is low-maintenance, operates without interruption, and consumes very little energy. It is easy to retrofit and can be installed on existing hall floors with minimal foundation work. Advantages of Our Flat Conveyor System: ✅ Low installation depth, retrofit-compatible with existing blasting rooms 🔇 Low noise and friction ⚡ Very low energy consumption 🏗️ Very low wear, as only rubber is used 🚧 Very low installation height

Condition: new, 0 1170 x 880 x 825 mm operating pressure 2,5 - 8,0 bar dimensions 1,33 x 1,24 x 1,77 m Dkjdpfxoupxdwe Ah Ien air consumption at 6 bar 350 l/min weight of the machine ca. 0,16 t