Used Traub Tna480 Tx8D for sale (104)

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Traub CNC turning machine TNA480, TX8D, year of manufacture 1990, serial number 607. Servo C-axis, reinforced rotary tool drive, 1 turret VDI40, tailstock, chip conveyor, 3-jaw chuck KNCS315, ID090090. Main drive with 2 gear stages. A8 spindle with hollow clamping cylinder Röhm SZS 86/169, ID 416530. Additional accessories, tool holders, chucks available upon request. Includes ATC optics, spare parts catalog, wiring diagram, tool holder catalog. Very good condition, operational, can be inspected while running. Machine geometry has been checked and corrected/adjusted, and a test run has been performed. Scraper + belt + drive sprocket, belt checked and replaced, maintenance performed at 4000 hours. Technically very good condition, guideways, spindle bearings in very good condition. Hedpez Eqh Djfx Ab Uefn Videos available upon request.

Condition: used, Year of construction: 1987, operating hours: 80,678 h, functionality: fully functional, Description follows Hfodpfjx A Hl Aex Ab Uon

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Traub CNC lathe TNS60, TX8D, year of manufacture 1990, serial no. 1403 C-axis, rotary tool drive, 1 turret VDI40, tailstock, chip conveyor, through-hole chuck cylinder, collet chuck 185E, AMK drive. Very good condition, fully functional. Machine geometry has been checked and corrected/adjusted. The machine was completely overhauled in 2019 and has had few operating hours since then; guide rails, spindle bearing, and ball screws are in top condition. Scrapers and belts have been checked and replaced. Hjdoz Eqmtopfx Ab Uofn The machine can be inspected while powered on.

Year of construction: 2005, condition: good (used), 7-position tool holder for CNC lathes Manufacturer: TRAUB, Model TNA 480, tool holder size VDI 40. Also compatible with SAUTER tool turrets with VDI 40 mounting. 7-position horizontal tool holder, positions no. 3/4/5/6/7/8/9 for drilling and milling, price per piece: 550,- € Hsdpohwnfksfx Ab Uefn 2-position horizontal tool holder, positions no. 1 and 2 for tapping, price per piece: 600,- € 1 NC drilling chuck VDI 40, clamping range 1-13 mm, price: 100,- € 1 NC drilling chuck VDI 40, clamping range 2.5-16 mm, price: 150,- €

Condition: ready for operation (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning-milling center TX8D -TX 8D control system -COMPLETE TECHNICAL DATA – SEE PHOTOS -Year of manufacture: 1994 -Hydrobar tool magazine -Tailstock Hfsdpfx Aezpf I Aeb Uon -Various powered tool holders -Three-jaw chuck -Tool holder -Complete documentation Errors and omissions excepted.

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, controller model: TX8H, swing diameter over cross slide: 445 mm, turning length: 1,000 mm, machine/vehicle number: 321, TECHNICAL DETAILS Spindle head according to DIN 55026: A8 Chuck diameter: 250/315 mm Spindle bore: 80 mm Turning length: 1,000 mm Swinging diameter over cross slide: 680 mm Swinging diameter over compound slide: 445 mm Main drive Motor power with direct drive: 31 kW Speed with direct drive: max. 2,800 min⁻¹ Motor power with 2-stage gearbox: 37 kW Speed with 2-stage gearbox: max. 3,150 rpm Tool holder W1 Number of tools: 12 Cylindrical tool shank according to DIN 69880: 40 × 63 mm Tool holder W2 Number of tools: 12 Hfjdpfx Abez Im U Se Uon Cylindrical tool shank according to DIN 69880: 40 × 63 mm Swinging diameter over compound slide: 355 mm MACHINE DETAILS Control system: TX8H EQUIPMENT Tool holder W2 as an optional extra.

Condition: used, Year of construction: 1992, operating hours: 27,221 h, functionality: fully functional, machine/vehicle number: 474, turning diameter over cross slide: 240 mm, turning length: 800 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 4,000 rpm, total height: 2,005 mm, total length: 2,953 mm, total width: 1,990 mm, type of input current: three-phase, overall weight: 4,300 kg, Last maintenance performed by INDEX-Werke GmbH & Co.KG on September 29, 2025. Chuck diameter: 200 mm Main drive: 30 kW Speed range: 40-4000 rpm Spindle bore: 65 mm Turning diameter over cross slide: 240 mm Turning length: 800 mm Cross slide with turret Tool positions: 12 Slide travel, cross/longitudinal: 220/850 Powered tools: 6 Speed at the drive wheel: 4000 rpm Tailstock Arbor diameter / Arbor travel: 85 / 140 Mount according to DIN 228: MK5 Hfjdpfxez Ng I As Ab Uon Total power: 52 kW Machine weight: 4300 kg Dimensions (L/W/H): 2953/1990/2005 Technical data subject to change without notice. Errors and prior sale excepted.

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm Hjdpfx Ajyw H Szjb Ujfn - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor

Condition: used, Year of construction: 2011, 5 machines are only sold as a PACKAGE. Includes a large set of tool holders, fixed + driven. 1. CNC turning center, 3 units Manufacturer: Traub Type: TNL 26 Year of manufacture: 2011 / 2008 / 2006 Operating hours: 64,154 / 75,849 / 81,823 Control: Mitsubishi TX 8i Equipment: - Main spindle - Counter spindle - Upper turret - driven + Y-axis - Lower turret - driven + Y-axis - Front tool holder - driven + Y-axis - Rear tool holder - Bar loader 2x FMB / 1x Breuning Includes tools for the TRAUB machines Tools + clamping devices: - 54 x driven tool holders - 181 x fixed tool holders - Collets, etc. See photos The machines come from ongoing production. Hfsdpfx Aezxhxvjb Ujn 2. CNC lathe, 2 units, one defective Manufacturer: EMCO Type: Turn 332 MC Year of manufacture: 2010 / 2008 Operating hours: unknown Control: Siemens Sinumerik 840D Equipment: - Main spindle - Counter spindle - Upper turret - Lower turret - Bar loader TOP ETL 8-45 One machine comes from ongoing production, one has already been used as a source of spare parts, several components have been removed. Dismantling and loading can be organized by a specialist company for an additional fee.

Condition: used, Year of construction: 2007, turning diameter 275 mm turning length 900 mm control TRAUB TX8i-s spindle passage 65 mm spindle turning speed - stepless 1 - 5.000 U/min spindle diameter in front bearing 110 mm C-axis 1 - 500 U/min x-axis 175 mm z-axis 650/975 mm y-axis +/- 40 mm rapid traverse X/Y/Z 20 / 40 / 20 m/min feed capacity X/Y/Z 5,5 / 5,5 / 10 kN tool turret - number of stations 10 number of driven tools 10 mm toolpiece turning speed range 1 - 6.000 U/min power capacity at 25 % load 5,50 kW max. torque at 25% load 17,50 Nm tool taper DIN 69880 Ø30x55 spindle diameter in front bearing 110 mm Hedpfjzwg Ndex Ab Ujfn total power requirement 95,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 10,00 x 3,50 x H3,00 m

Condition: used, Year of construction: 2016, controller manufacturer: Mitsubishi, controller model: TX8i-s, _____ Description: Year of manuf. : 2016 Control : Mitsubishi TX8i-s Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):35 kW Torque (max.):120 Nm Barcapacity:65 mm Hsdpfx Abez A Nz Do Uefn Workpiececlamping:Hainbuch Spanntop Kombi Axfix Gr. 65 Subspindle: Technology:Motor spindle, integrated in tool carrier II Speed:7.000 rpm :Power (max.):12 kW Torque (max.):22,5 Nm Chuck:Hainbuch Spanntop Kombi Axfix Gr. 42 Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:Traub ø45 mm Tooldrive:12.000 rpm, 10 kW, 8 Nm Movement in X/Y/Z:140/100/300 mm Toolcarrier II (X/Y/Z): Technology:Turret with 9 stations Taper:Traub ø45 mm Tooldrive:12.000 rpm, 10 kW, 8 Nm Movement in X/Y/Z:140/100/300 mm Backworking attachment: Technology:Backworking attachment with 8 stations (2x synchron, 6x asynchron) Driven Tools:5 stations Tooldrive:12.000 U/min, 6,7 kW, 5,3 Nm Equipment/Accessory: Positionsensor:Direct Scales in X (up/down) Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbaletfilter and High-pressure, 80 bar Coolanttemperaturecontrol:Interface for external chiller prepared, Deltatherm Wasteheatmanagement:Interface for external chiller prepared Rawmaterialfeed:Barloader, FMB SL 80 V Finished part removal:Unloading device (NC-controlled) with coneyor belt Fireextinguishing unit:Kraft + Bauer Oilmistseparation:Electrostatic extraction LTA AC 3001 Further Accessory:Misc. used static and driven Toolholder

Condition: good (used), functionality: fully functional, 1 x multi-spindle automatic lathe Traub TD 26 with boring unit + tool magazine Iemca AS 325/32 CT Year of manufacture: 1992 + chip conveyor Hodez Agyaepfx Ab Usfn The machine can be inspected while powered on.

Condition: good (used), functionality: fully functional, 1 x Multi-spindle lathe Traub TD 26 with loading magazine Hfedezz Nf Njpfx Ab Uen Iemca Boss 432/32 Year of manufacture: 2002 + Chip conveyor GS Industrietechnik K-I-150 Year of manufacture: 2017 Equipment: Drill chuck pneumatic workpiece clamping (Wachtler)

Condition: good (used), Internal item no.: 25088 Tool holder Thread whirling holder incl. cutting inserts Index / Traub No.: 12068219 Hjdpfx Absxu Dcvs Ujfn The tool was used on a Traub TNL18 Very well-maintained condition!

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 180 mm turning length: 490 mm swing diameter: 450 mm cross travel: Z-Weg: 168 mm control: Traub TX8D revolution per minute: 20 - 4000 U/min Hfedpeu Ix N Sjfx Ab Uen spindle passage: Ø 60 mm operating hours - idle run: 23.495 h tool turret: 12 tools total power requirement: 38 kW Weight approx.: 4,2 t dimension machine xH: 3,6 x 2,5 x 2,2 m Tool holder straight shank DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200mm hydraulic clamping Operation via double foot switch and control panel/operating panel. Coolant device The Traub carries an integrated chip conveyor with an ejection height of 1,100mm (currently without function). Accessories: multiple small parts 8 x machine feet without tailstock i.D. *

Condition: used, Year of construction: 2011, controller manufacturer: Mitsubishi, controller model: TX8i-s, _____ Description: Year of manuf. : 2011 Control : Mitsubishi TX8i-s Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power:22,6 kW Torque:180 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65 Subspindle: Hfedpfx Aezr Dd Usb Uen Technology:Motorspindle Speed:5.000 rpm Power:22,6 kW Torque:180 Nm Workpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65 Ejector:Hydraulic with flush Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Toolcarrier II (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Toolcarrier III (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbeltfilter and Highpressure, 80 bar Coolanttemperaturecontrol:Interface for external chiller prepared, Deltatherm Rawmaterialfeed:Barlaoder, FMB SL 80S Finished part removal:Unloading device (NC-controlled) with coneyor belt Oilmistseparation:Electrostatic extraction, LTA AC3001 Further Accessory:Misc. used static Toolholder

Condition: good (used), Year of construction: 2008, functionality: fully functional, Traub Stamag DNH42/3000, year of manufacture 2008, DNH42, bar feeder, loading magazine, loader. Hjdpfxozp Ec Hs Ab Ujfn

Condition: good (used), Year of construction: 2013, TX8i-s / WinFlexIPS Bar diameter up to Ø 32 mm Hsdpfx Aszzahzeb Uofn Design allows for conversion between long and short turning Controlled axes: 9 Tool holder WRV on top, X/Y/Z dual drive Counter spindle with WRV on the bottom, separate drive Rear unit with drive Rated voltage 400 V, 3~, N, PE · 50 Hz Connection power 28 kVA, pre-fuse 63 A Recommended supply line: 16 mm² up to 30 m, otherwise 25 mm² Total drive power 46 kW · 73 A Compressed air requirement approx. 300 Nl/min Machine weight 6,850 kg Dimensions L × W × H 3,870 × 1,670 × 2,500 mm Safety standard EN ISO 23125, design type 3 small - Coolant lubrication with cutting oil — internal feed 30 bar, medium pressure 20 bar, high-pressure internal cooling 80–120 bar with its own pump - Coolant treatment system with strip filter (ELBARON) - Mist extraction and fume separator - Fire protection and extinguishing system — prerequisite for unmanned shifts with oil - Workpiece removal with linear unit (part gripper) - Incl. various clamping jaws - Linear measuring system in the X-axes - TRAUB tool monitoring and WinFlexIPS programming - Bar loader FMB turbo 3-36 for bars up to 3,200 mm, with synchronous and displacement device - Chip conveyor, hinged belt - Color: Dust gray RAL 7037 Machine operating time approx. 30,600 hours Machine price without the shown accessories (extensive accessories can be purchased separately) Errors and prior sale excepted. The machine can be inspected under power with short notice.

Year of construction: 2023, condition: ready for operation (used), An unused Traub CNC twin-spindle turning and milling center with peripheral equipment is available. Spindle types 1/2: D76/D76, max. turning length: 900mm, max. workpiece diameter: 76mm, number of tool carriers: 3, control system: Traub TX8i-s V8. Main spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Counter spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Upper tool carrier: axes: X/Y/Z, stations: 12. Lower left tool carrier: axes: X/Y/Z, stations: 12. Lower right tool carrier: axes: X/Y/Z, stations: 12. Including Isi Elbaron RON4DHEC mist extraction and filtration system, custom-built circulation conveyor, Bürener hinged belt chip conveyor, Bürener Eco-Fluid coolant system (600l), cooling unit, coolant chiller, Traub WH workpiece handling system, various grippers and gripper pairs, IoT, and management and monitoring software. This machine was never put into operation and is therefore in as-new condition. Documentation available. An on-site inspection is possible. Hjdjzkvkqepfx Ab Usfn

Condition: used, Year of construction: 2007, spindle passage 65 mm Max. Turning length 450 mm Spindle diameter in forward position 110 mm control System - TX8 I Hodpfxszyvb Uj Ab Uofn number of spindle speeds 4.000 U/min CNC lathe | TRAUB - TNC 42/65 equipped with bar loader. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 |TNC 42-65 | TNC 42/65

Condition: good (used), Year of construction: 2002, functionality: fully functional, 1 x CNC turning center Traub TNA 300 Year of manufacture: 2002 (Spindle hours: 40746) Control: System TX 8 H with bar feeder LNS Hydrobar + chip conveyor Knoll Well-maintained machine with an extensive range of accessories, in excellent optical and technical condition. Accessories 33 x VDI 30 tool holders for turret (11 of which are driven) 1 x additional collet chuck with spindle reduction sleeve 10 x collet 181 E 10 x collet 171 E optional 1 x rotating steady rest in tailstock 1 x ATC optics Complete documentation Hjdpfx Aewtlz Tob Uefn The machine can be inspected while running.

Condition: good (used), Year of construction: 1999, operating hours: 110,000 h, functionality: fully functional, spindle bore: 42 mm, Description follows Hodpex A Ha Hofx Ab Usfn

Condition: used, Year of construction: 2003, CNC long-turn lathe with bar feeder magazine, Stamag FMB Turbo 5-42 Control system: TX8i with Traub tool monitoring Main spindle: - C-axis with driven tools - Mounting for driven guide bushing, max. passage 26 mm, stroke 225 mm - Electrical and pneumatic control for driven guide bushing Counter spindle: - Counter spindle as a motor spindle with hollow clamping and locking device with Z4 slide - C-axis - Tool carrier at the bottom, X1 / Y1 axes - 12 driven tool positions - Tool carrier at the top, X2 / Z2 axes - 12 driven tool positions - X3 - cross axis for front tool holder / counter spindle - Front tool holder, 5-position with Z3 slide, without tool drive - Cut-off station (5 tools) with X4 / Y4 axis, without tool drive - Articulated belt conveyor - Coolant system for externally and internally cooled tools, 20 l/min - 30 bar - System for deep-hole drilling with compact belt filter and coolant tank, 1000 L volume - Air deflection plates on the temperature control unit - Fire protection system for machining with cutting oil - Coolant mist extraction system Hfsdpfxsz Aqkcs Ab Uon

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, spindle speed (max.): 5,600 rpm, travel distance X-axis: 140 mm, travel distance Z-axis: 520 mm, spindle motor power: 18,500 W, type of input current: three-phase, overall weight: 5,600 kg, bar passage: 42 mm, input current: 85 A, number of tool turrets: 2, number of tool stations in tool turret 1: 14, number of driven tool stations in tool turret 1: 14, number of tool stations in tool turret 2: 14, number of driven tool stations in tool turret 2: 14, CNC Lathe TRAUB TNC 42/65 TECHNICAL CHARACTERISTICS: Hfjdpfjzh D Aijx Ab Uon Year of manufacturing: 2009 CNC control: TRAUB TX8i Number of axes: 8 Stroke Y axis: +/- 35 [mm] Stroke Z1 axis: 450 [mm] Stroke X1 axis: 140 [mm] Stroke Z2 axis: 520 [mm] Stroke X2 axis: 140 [mm] Stroke E axis: 450 [mm] Spindle throughbore: 42 [mm] Max. spindle speed: 5600 [rpm] Increment C-axis: 0.001 [°] Spindle power: 18.5 [kW] Counter spindle throughbore: 42 [mm] Max. counter spindle speed: 5600 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 11 [kW] Type of tool holders: VDI 30 Number of tool stations - Turret 1: 14 Number of tool stations driven - Turret 1: 14 Max. speed driven tools - Turret 1: 4000 [rpm] Number of tool stations - Turret 2: 14 Number of tool stations driven - Turret 2: 14 Max. speed driven tools - Turret 2: 4000 [rpm] Total power required: 107 [kVA] Rated current: 85 [A] Supply voltage: 400 [V] Weight: 5600 [Kg] INCLUDED EQUIPMENT: x1 Set of collets x1 Set of tool holders x1 Chip conveyor x1 IRCO PROFIMAT ECO 42.6 bar feeder x1 KNOLL coolant system Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine tool similar to turning and milling centers, machining centers and milling machines, including brands such as Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG and Mazak. CNC lathe, CNC turning center, CNC turning machine, machining center, CNC milling machine, CNC machining center, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.

Year of construction: 2006, condition: used, Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible. Hjdozuzzvjpfx Ab Usfn