Used pressbrakes 75-99t pressure for sale (57)

Condition: new, pressure 80.0 t chamfer lenght 2600 mm distance between columns 2200 mm column arm 250 mm ram stroke speed 90.0 mm/sec work speed 7.5 mm/min return speed 60.0 mm/sec work stroke 160 mm Giedpfxsxaafwj Ahvop dayligth 380 mm table height 900 mm oil volume 150 ltr. voltage 400 Volt weight 5227 kg range L-W-H 3750 x 1950 x 2400 mm Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - AKAS laser in front of the machine - manual crowning - Upper tool, deer foot - Lower tool, die block with 4Vs - SICK light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes

Condition: ready for operation (used), Year of construction: 2000, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1650 mm column arm 400 mm stroke 240 mm dayligth 320 - 560 mm ajustment speed 150 mm/sec working feed 15.0 mm/sec Gsdpfoxab Ugjx Ahvsip return speed 150 mm/sec back stop - adjustable 5.0 - 1000 mm table width 110 mm work height max. 1050 mm operating pressure max. 297 bar compressed air 4.5 - 6.0 bar oil volume 200 l operating pressure 340 bar total power requirement 7.5 kW weight of the machine ca. 5900 kg range L-W-H 4100 x 2100 x 2750 mm with increased installation height / piston stroke well-maintained condition (!!) - in checked condition - machine video - ?v=ikl6RNZWeiU Equipment: - CNC electro-hydraulic press brake - including CYBELEC CNC control * swiveling control panel at the front right * external screen - CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) * Travel range .. 5.0 - 1,000 mm * Travel speed .. 250 mm/sec. - CNC electro-motorized height adjustment of the back stop (R axis) * Travel range .. 70 - 235 mm * Travel speed .. 100 mm/sec. - CNC electro-motoric adjustment of the stop fingers (Z axes) * Travel range Z1 .. 405 - 1.565 mm * Travel speed .. 1.000 mm/sec. * Travel range Z2 .. 485 - 1.645 mm * Travel speed .. 1.000 mm/sec. - CNC electro-motoric table crowning - CNC pneumatic die displacement (I axis) - EHT pneumatic tool clamping - upper tool - EHT manual tool clamping - lower tool * Tool holder 90.0 mm + 13.0 mm possible - 1x freely movable 2-hand/foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging door) - original operating instructions + circuit diagram etc. * Special accessories included: - Oil cooler for use in continuous operation

Condition: used, Year of construction: 1998, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec back stop - adjustable max. 600 mm table width 120 mm work height max. 1050 mm Number of working hours 28.500 h oil volume 200 l operating pressure 340 bar total power requirement 14.0 kVA weight of the machine ca. 9050 kg range L-W-H 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition (!!) with only approx. 28.500 operating hours - in checked condition - machine video - Gisdpsxaa Urefx Ahvep ?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Condition: used, Year of construction: 1995, pressure 80.0 t chamfer lenght 2050 mm distance between columns 1550 mm column arm 250 mm table width 85.0 / 135 mm stroke ca. 390 mm dayligth ca. 585 mm ajustment speed 180 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec Gisdpfoxachujx Ahvjp work height max. 1050 mm Number of working hours 32.495 h oil volume 200 l operating pressure 320 bar total power requirement 11.6 KW weight of the machine ca. 7300 kg range L-W-H 3700 x 2000 x 3000 mm Good/well-maintained condition (!!) - in checked conditions - machinevideo - ?v=IKyUmzB0WTI ----- CNC electro-hydraulic press brake with: * Increased installation height .. approx. 550 mm * Increased cylinder stroke .. approx. 390 mm ----- Features: - Robust electro-hydraulic press brake * MADE IN GERMANY (!!) - CYBELEC CNC control "DNC 904 PS-A" (SN 0332) * Pivoting, front right * High-resolution graphic display * Clear, easy-to-read menus in the operator's language * Large tool and product library * Graphic 2D programming * Automatic bending sequence calculation - CNC-controlled axis adjustment: Y1+Y2 / X / R axes - CNC electro-motorized backgauge (X axis) * With 4 manually adjustable stop fingers - CNC Electric height adjustment (R axis) - WEINBRENNER electro-hydraulic upper tool clamp - WEINBRENNER electro-hydraulic lower tool clamp - 1x freely movable 2-hand/foot control - 2x front, movable support arms - Side safety device (swinging doors) - Rear safety device (swinging doors) - Machine/control manual + circuit diagram

Condition: ready for operation (used), Year of construction: 1996, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm Gisdpoxabnyofx Ahvsp table width 60.0 mm table height 910 mm Number of working hours ca. 37.102 h total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm good / well-maintained condition (!!) - Inspected condition - Machine video - ?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 - CNC-controlled backgauge adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R-axes) - CNC-controlled left-right adjustment of the stop fingers (Z-axes) - Freely movable two-hand control & foot switch - Tool crowning - AMADA type - Various tools - CE marking - Side guards (hinged doors) - Rear guards (hinged door) - 2x emergency stop buttons at the front - Operating instructions

Condition: used, Mackey Bowley Hydraulic Press 100tonnes Capacity, 400mm Stroke, Table 700 x 750mm, Ram 160mm Diameter (Approx), Ram Base Plate Diameter 700mm, Model CM507/04 Godpeyabf Hefx Ahvjip

Condition: used, bending length: 3100pressure: 80motor power: 5,5oil filling: 100 Gjdpfx Asru Unbohveip

Condition: new, Year of construction: 2026, overall weight: 9,000 kg, pressing force: 100 t, 2 in 1 = Press Brake + Shear Gjdsd Hn Taspfx Ahvjip bending length 3040 mm, Press capacity 100 to, Shear capacity L = 3200 mm x 6 mm, throat 200 mm, working high 640 / 1240 mm, Control CYBELE CybTouch 15, mot. gauge 700 mm, shadow cutting line, motor 10 KW dimensions 3700x1900x2400 mm, ca. 9000 kgs same machine available L = 2000 mm und L = 1400 mm

Condition: good (used), functionality: fully functional, Year of construction: 2005, Used 2-meter CNC press brake from Trumpf Model: V85 Capacity: 2050 x 85 tons Delem CNC control Giodpfx Ahex I N Awsvjp CNC-controlled Y1, Y2, X, and R axes Wila hydraulic upper clamping Year of manufacture: 2005 Without tools

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, bending force (max.): 80 t, working width: 2,500 mm, stroke length: 200 mm, overall weight: 7,500 kg, Equipment: foot remote control, TECHNICAL DETAILS Press force: 80 t Bending length: 2,500 mm Stroke: 200 mm MACHINE DETAILS Dimensions & Weight Required space (L x W x H): approx. 3,700 x 2,000 x 3,200 mm Machine weight: approx. 7,500 kg EQUIPMENT 2 support arms in front of the machine Light barrier in front of the machine Gjdox I Ealjpfx Ahveip Foot pedal

Condition: excellent (used), Year of construction: 1999, Technical data: Working length: 2550 mm Stand width: 2125 mm Pressing force: 80 tons CNC control: AMADA OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back stop Stroke: 200 mm Thrust: 420 mm Crafter Working height: 960 mm Motor power: 7.5 kW Gjdpfx Aevrh Rcohvoip CE mark Dimensions (length x width x height): approx. 3000 x 2250 x 2250 mm Weight: approx. 6 tons Accessories: 1 set of AMADA standard tools Condition: The machine is in very good condition You can find more machines on our homepage. The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear and tear are in keeping with its age; used machines are sold without any warranty.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,365 h, bending force (max.): 800 t, stroke length: 200 mm, overall weight: 6,500 kg, power: 15 kW (20.39 HP), Equipment: angle stop, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, We are offering this as-new Bystronic ByBend Star 80/1530 press brake with bending cell, year of manufacture 2023. Manufacturer: Bystronic Gedpsx Ifbpsfx Ahvoip Model: ByBend Star 80/1530 Year of manufacture: 2023 Condition: as new Category ID: 1467 Type ID: 1717 Machine type: Press brake with bending cell If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, bending force (max.): 85 t, stroke length: 215 mm, throat depth: 410 mm, distance between stands: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 85 t Bending length: 2,050 mm Distance between uprights: 1,750 mm Stroke: 215 mm Throat depth: 410 mm MACHINE DETAILS Control: DELEM Dimensions & Weight Machine dimensions (L x W x H): 2,700 x 2,100 x 2,400 mm Weight: 7,900 kg EQUIPMENT Two-hand operation 2 support arms Side safety doors Lasersafe Fissler Wila tool clamping system Die shifting Gijdpfxjxxq T Nj Ahvjp Crowning Tool cabinet

Condition: good (used), Year of construction: 2000, machine/vehicle number: 883454, Offer 25515 Technical data: - Max. working width: 1040 mm - Max. material thickness (at 40 kg strength): 3.5 mm - Table width: 300 mm - Throat depth: 100 mm - Working height: 880 mm - Front angle stop - 3 additional front support arms - Rear stop manually adjustable: 5 – 550 mm - Drive: 400 V / 5.5 kW - Electric foot switch - Required space including rear stop, without front support arms: approx. W 1500 x H 1250 x D 1400 mm Gsdpfjx E Rfbex Ahveip - Weight: approx. 1400 kg

Condition: new, pressure: 80bending length: 2550column width: 2550daylight: 590stroke lenght (max.): 300messurements (LxWxH): 3680x1960x2500weight approx.: 6100motor power: 11CNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Godpfxod Etfwj Ahveip

Condition: new, pressure: 65bending length: 2550column width: 2550daylight: 590stroke lenght (max.): 300messurements (LxWxH): 3680x1960x2500weight approx.: 5500motor power: 11CNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Godpfed Etfxsx Ahvoip

Condition: good (used), Year of construction: 1999, machine/vehicle number: 883345, Offer 25513 Technical Data: - Max. working length: 2050 mm - Distance between uprights: 1750 mm - Max. pressing force: 850 kN - Distance table/ram: 535 mm - Throat depth: 410 mm - Ram stroke: 365 mm - Stroke speeds: - Rapid downstroke speed: 200 mm/sec - Return speed: 135 mm/sec - Pressing downstroke speed: 1 - 11 mm/sec - Total drive power: 13 kVA - Space requirement approx.: W 2700 x H 2900 x D 2100 mm - Weight approx.: 9100 kg Equipped with: - 5-axis CNC control DELEM, DA - Y1 + 2; X; R; Z - Two-hand control panel with foot switch - CNC-controlled crowning system - CNC-controlled backgauge with height adjustment 5 - 860 mm - Hydraulic tool clamping Gsdpfjx Exzkex Ahvjip - Pneumatically assisted die table displacement

Condition: used, functionality: unexamined, For press brakes: Used servomotors of various types, encoders, linear scales, servodrivers. Please specify the type and send photos. We will buy your worn press for spare parts. Gsdpfx Aex Dr U Eehvoip

Condition: used, functionality: fully functional, Year of construction: 1970, control type: manual, bending force (max.): 75 t, working width: 3,000 mm, oil tank capacity: 150 l, Equipment: lower tooling, upper tooling, well-preserved Colly press brake, slight leakage at the right cylinder Gjdpfsxpn Ewex Ahvsip

Condition: excellent (used), Year of construction: 2001, For sale LVD PPEB 80/25 in very good technical condition. Under power, can be inspected any time Gijdpferx S Hnex Ahvjp

Condition: used, functionality: fully functional, Year of construction: 2001, Press force 85 t, Bending length 2050 mm, Distance between uprights 1750 mm, Control DELEM, Stroke 215 mm, Throat depth 410 mm, Total power 13 kW, Weight 8,750 kg, Machine dimensions 3190 x 2100 x 2375 mm Gisdew Imq Repfx Ahvsp

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, working width: 2,500 mm, pressing force: 80 t, table width: 60 mm, TECHNICAL DETAILS Pressure: 80 t Gisdjwmdf Dspfx Ahvjp Bending length: 2,500 mm Table width: 60 mm Working height: 960 mm Dimensions and clearances Clearance between columns: 2,160 mm Clearance between press beams: 370 mm Thrust: 400 mm Weight Machine weight approx.: 5,000 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, control type: CNC control, actuation type: hydraulic, bending force (max.): 80 t, working width: 2,500 mm, stroke length: 200 mm, TECHNICAL DETAILS Pressure: 80 t Bending length: 2,500 mm Stroke: 200 mm MACHINE DETAILS Gjdpsw Rcgaofx Ahvoip Control: CNC EQUIPMENT 2 support arms in front of the machine Light curtain in front of the machine Foot switch

Condition: used, functionality: fully functional, STILMEC90 Press Brake, 8.5 m WORKING LENGTH: 8500 mm BENDING FORCE: 90 TON STROKE: 150 mm MODEL: GS85AB YEAR OF MANUFACTURE: 2005 / REVAMPING: 2022 DIE FOR HEM BEND FULLY FUNCTIONAL Giedpfowg Ec Rjx Ahvjp

Condition: good (used), Year of construction: 2001, working width: 2,500 mm, overall weight: 6,800 kg, Equipment: european tool clamping system, Press Brake Darley EHP-LT80 Pressing force: 80 tons Working length: 2500 mm Year of manufacture: 2001 Machine weight: 6800 kg Control: Delem 69 No tools included, compatible with Amada tools Giedpoxnxdbsfx Ahvsp