Year of construction: 2014, condition: used, Leistritz ZSE 60 MAXX-36D Extrusion Line (2014) comprising Koch Technik and Scholz Dosiertechnik feeding system dosing units Leistritz ZSE 60 MAXX-36D twin-screw extruder with 2x 60mm diameter screws 36:1 L/D ratio, co-rotating Guodpfxozb N Hze Abmsc 8-barrel housing section, electrically heated and water-cooled 2 degassing ports 1200 rpm maximum screw speed 495kW motor with Flender direct-driven gearbox Free-standing control panel with microprocessor and interconnecting wiring BD Plast BDL double screen changer Ettlinger ERF 200 melt pump Econ EUP 600 pelletizer Stainless steel water bath incl 2x sifters on legs Tredkamp 1C-T 10,000L stainless steel mixing silo Motan 14,000L mixing silo on legs with elevator Big bag system

Condition: like new (used), Year of construction: 2021, clamping force: 6,500 kN, Equipment: documentation/manual, ENGEL DUO 3660/700 ecodrive (2021) M017 CLAMPING UNIT • Clamping force: 700 T • Coining: NO • Max mold weight: 11000 kg • Max mold weight per plate: 7300 kg • Size between bars (WxH): 1100x960 mm • Min mold height: 450 mm • Max mold height: 950 mm • Max stroke open: 1850 mm • Centering ring FIX / MOVE: 160 / 200 mm • Fast clamping system: NO MOLD INTERFACE • Heating zones: 16 (16 pin TC, 16 pin PW) • Water cooling circuits: 12+12 • Hydraulic circuits (cores): 2+2 • Hot runner sliders hydraulic (nozzles): 8 • Hot runner sliders pneumatic: 4 INJECTION UNIT • Screw diameter: 70 mm • Nozzle face + thread: R??+M36x2,0 • Injection unit type: 3660 • Screw stroke: 360 mm Guodpfszb H Enox Abmsc • Max injection capacity: 1385.44 cm³ • Max injection pressure: 2300 Bar • Max injection rate: 296 cm³/s • Accumulator SW / HW: NO / NO ⚡ *ELECTRICAL / ROBOT* • Mold ejector clamp: YES • Sockets 400V/16A: 6 • Sockets 400V/32A: 12 • Sockets 400V/63A: 0 • Robot type: Linear • Vacuum ports: 6 • Air pressure ports: 6 • User inputs / outputs: 16 / 16

Condition: used, Year of construction: 2014, Clamping force: 600 t Screw diameter: 60 mm Distance between tie bars V: 910 mm Distance between tie bars H: 1030 mm Shot volume: 710 cm3 Godpfx Abozb E Dpemjuc Type: Horizontal Drive: Hydraulic Cores 2 + 2 \+ Robot Viper 40

Condition: ready for operation (used), Year of construction: 1999, operating hours: 91,191 h, clamping force: 25,000 kN, screw diameter: 150 mm, controller manufacturer: ENGEL, This ENGEL ES 23050/2500 DUO Injection moulding machine was manufactured in the year 1999 and has 91191 production hours. It is equipped with an Engel control unit. The machine has a clamping force of 25000 kN, is in good condition and well maintained. Machine Benefits Qualitative Machine Benefits • The machine is in very good condition, with all the minor maintenances done by internal service and the most important ones done directly by engel. Technical Machine Benefits • Opening power: 1600 kn • Opening lenght: 3100 mm • Diameter of the columns: 360 mm • Dosing lenght: 720 mm • Max injected volume: 12725 cm2 • Rotational speed of the screw: 85 rpm • Specific injection pressure: 1410 bar Gujdpfxszb Emqo Abmsc • Heating potence: 120 kw • Heat zones: 7 Important note: The robot is not included in the price. Please inquire separately for the robot price as an extra option.

Condition: not inspected (used), Year of construction: 2014, Cooling capacity: 10.1 kW Flow rate: 5,000 L/h Weight: 180 kg Gsdpey Nif Isfx Abmjuc The unit is ready for immediate shipment and is available immediately!

Year of construction: 2021, condition: good (used), 1 complete granulation line, cutting/compacting/extruder combination, tangential, since 2021 only operated in a single shift using production waste, including DPE ground material/aluminum (pipe material). System consisting of: Hydraulic roller cutter, 140 cm width, for roller diameters up to 60 cm, 18.5 kW drive. Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with timer. Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic slide, rotor with 74 reversible cutting blades, discharge and inclined conveying screw. Roller feed for heavy rolls with cutting device in the longitudinal direction to relieve the mill, frequency inverter-controlled drive, 3.5 kW. Guedpfx Ajzb Dr Ssbmec Cutting mill with 11 kW, downstream for parallel operation with shredder/roller feed, suction/conveying fan to the buffer silo with agitator, frequency inverter-controlled for discharge rate/dust protection. Feed screw for ground material. Conveyor belt, L 9 m x W 80 cm, metal detection bridge, frequency inverter controlled via load detection from the cutting compactor. Conveying screw for 100% ground material, stainless steel, L 4.5 m and diameter 100 mm. Cutting compactor, 138 kW, frequency inverter controlled, suction fan, water spray cooling, tangential to extruder ES 180 mm 30 LD with 2-stage vacuum degassing, including: Laser filter LF with diameter 500 mm / 2-disc system, discharge screw for contaminants with timer, melt pressure sensor, spare screens: 60 mesh 2x, 70 mesh. Strand die, 26 holes - interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wear parts in January 2026. Strand cooling water tank, L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023. Strand granulator SG 200 E with 7.5 kW as well as 1 spare granulator 5.5 kW for quick replacement during overhaul or cleaning/maintenance work. Granulate classification sieve, stainless steel, including conveying fan and pipes. BIG BAG filling frame, 2-place, with ladder and platform. BIG BAG floor scale with receipt printer. Throughput material-dependent, up to 900 kg/h. Start-up, commissioning by our technicians, details and costs upon request - after consultation. Inspection in Wuppertal, appointment can be arranged shortly.

Year of construction: 2021, condition: good (used), functionality: fully functional, 1 complete granulation line, partially overhauled and expanded in 2025, consisting of: Conveyor trough with screw (level-controlled) for 100% ground material or additive, feed screw with mixing paddle and color dosing, frequency-controlled Buffer silo for film with agitator and frequency-controlled rotary valve, as well as an agitator in the stuffing unit with load monitoring and reverse operation (adjustable) RCP horizontal stuffing unit 15 A for film and ground material, frequency-controlled. Extruder 120 mm - 38 LD - vacuum degassing (water ring) Year of construction 1996 - screw new in 2026 / heaters new / cooling fan new 180 kW - DC (frequency inverter 180 kW as a spare) Laser sieve Kitech with 60 mesh, diameter 350 mm Control via control cabinet, year of construction 2025 Strand die with 26 holes, closable and adjustable for different materials using variable screw-in nozzles Strand cooling water tank with new stainless steel bearings in plastic rollers Strand blower Strand granulator SG 200 Kitech, with 5 kW drive - frequency-controlled Granulate classifying sieve and conveyor blower with pipelines BIG BAG filling station with closure for Big-Bag change Commissioning by our technicians, details and costs upon request. Gsdpfx Abszb Dp Rjmjuc Inspection in Wuppertal, appointment available on short notice.

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Gusdpfx Abjyhbt Hjmoc Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: used, Year of construction: 2015, machine/vehicle number: 663462, functionality: fully functional, Specification: Min./max. air pressure: 0.4/0.6 MPa; 4/6 bar Max. pressing force: 50 kN Total stroke: 150 mm Power stroke: 7 mm Type: STE341-7210 SF device Power: 0.5 kW Gsdpfx Abewtgpxjmeuc Power supply: 230/3/50-60 V/A/Hz Control voltage: 24 VDC Protection rating: IP54 Pre-fuse: 16 A The TOX Pressotechnik hydropneumatic press EEB 008.061.A.001 is a versatile and powerful solution for precise forming and assembly operations in industrial manufacturing. It combines the advantages of hydraulics and pneumatics to ensure consistent force transmission and high accuracy. The robust design ensures long service life and reliable operation, while the user-friendly control system enables easy handling.

Year of construction: 1994, condition: used, functionality: fully functional, Plastic granulator with feed conveyor and dedusting system Guodpfowtfavjx Abmoc The CONDUX plastic granulator CS 300/300-S-II is a reliable solution for the size reduction and granulation of plastics. Equipped with an integrated feed conveyor and dedusting system, it ensures continuous processing in a clean working environment. Its robust design guarantees durability and consistent performance, making it ideal for recycling and recovery processes.

Year of construction: 1999, condition: ready for operation (used), A large-format injection molding machine Krauss Maffei is available. Clamping force: 6500kN, tie bar spacing X/Y: 1000mm/930mm, platen dimensions X/Y: 1530mm/1450mm, max. opening stroke: 900mm, mold height range: 350mm-650mm, max. platen spacing: 1550mm, ejector stroke: 250mm, ejector force: 110kN. Machine dimensions X/Y/Z: approx. 10000mm/2800mm/2450mm, weight: approx. 46000kg. Including a Wittmann handling unit. Documentation available. An on-site inspection is possible. Guedpfx Aszc Rd Dsbmoc

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, power: 0.2 kW (0.27 HP), total length: 205 mm, total width: 280 mm, total height: 380 mm, overall weight: 11 kg, number of chambers: 1, Equipment: CE marking, Container volume: 6 L Maximum power consumption: 200 W Air consumption: 3 Nm3/h Pressure range: 6-10 bar Gsdpfxjzc Rcyj Abmsuc Total weight: 11 kg

Year of construction: 2019, condition: excellent (used), The Compact Series The new Wanner granulators in the C’s series (“C” stands for “compact,” “s” for “silent,” i.e., noise-optimized) offer practical solutions for virtually all challenges associated with the in-line recycling of sprues and rejected parts during the production process. Thanks to their modular design, the C’s series granulators can be easily adapted to specific applications or operational requirements. Depending on the method of sprue feeding, the discharge of regrind, or the specific injection molding machine being used, the Wanner C’s series offers optimal solutions tailored to your workflow through a wide range of standard components. Optimized cutting geometry and low rotor speeds ensure high-quality regrind with minimal dust content, while sound-insulated feed hoppers and a grinding chamber design optimized to minimize structure-borne noise and vibration contribute to low noise levels. The generously sized gearbox ensures a long service life for the granulators while also allowing for extremely compact dimensions. The grinding chamber can be opened quickly and easily—saving time and costs, for example, during cleaning for color or material changes. Advantages of the C’s Series Easy adaptation to specific applications via a modular system Gjdpfxszc Nyds Abmjuc Compact design requires minimal floor space next to the injection molding machine Solid cast/steel housing mounted on swivel casters Robust motor/gearbox unit for long service life Significantly reduced noise levels thanks to a staggered-cut rotor and a grinding chamber design optimized for vibration control. Easy operation and cleaning of the mill save time and costs Improved intake of bulky sprues and regrind parts due to optimal rotor geometry Grinding chamber with hardened inserts for minimal wear when processing glass-fiber reinforced material High-quality, low-dust regrind achieved through optimized cutting geometry. The co-rotating disc in the side wall reduces friction, thereby minimizing heat buildup and material degradation. Blades easily resharpened without special fixtures Sound-insulated feed hoppers with safety guards Technical Data Manufacturer: Wanner Type: C17.26sv Grinding chamber opening: 170 x 260 mm² Rotor diameter: 170 mm Rotor blades: 12 Stator blades: 2 Throughput: 20–25 kg/h Screen perforation: 3–8 mm Voltage: 400 V / 50 Hz Collection bin volume: approx. 6 l Suitable for glass-fiber reinforced material (standard) Control system: Contactor control with overload protection switch Electrically redundant design with self-monitoring safety relay compliant with EN 12012 5 m power cable Weight: 155 kg Year of manufacture: 04/2019 Product video "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2025, TEMP 90 W9 SSR - DM General information: maximum 90 ° C water temperature range -robustes steel sheet housing device on wheels Hydraulic: Immersion pump (make Bacon) with pressure / vacuum function (leak stop operation) -Qmax. 60 l / min Pmax. 3.8 bar Tank and heater made of stainless steel Heating power 9 kW tank capacity 12 liters Fittings made of brass/stainless steel-automatic water filling -electrical level indicator -indirektes cooling system (plate heat exchanger) Cooling capacity ~ 40,000 kcal / h (10 sheets) Display gauge -integrated bypass Solenoid valves for cooling and recovery Electrical and control: -Electronic, self-optimizing PCB control -electronic flow measurement Control voltage in the unit 24 V AC Gujdpfx Aed Aathjbmoc -Akustische and visual alarm indicator -Solid state relays Safety thermostat Sensor break monitoring Monitoring of tube breakage and leakage Connection cable with plug -Dimensions: 295 x 575 x h495 mm -Weight: 40 kg

Year of construction: 2001, condition: good (used), For sale: an industrial twin-screw extruder, Werner & Pfleiderer ZSK 133, now known under the Coperion brand. This machine is designed for processing and compounding plastic materials, especially PP granules, polyolefins, masterbatches, filled, and modified materials. Gujdpfjzc I Igjx Abmoc The extruder was manufactured in 2001 and purchased used in 2015 in working condition. However, it has not been used in our production since the purchase. It has been idle since then and is being sold due to lack of use. Key specifications: capacity up to 4 t/h, main electric motor 1100 kW, voltage 690 V, frequency 50 Hz, motor speed 1492 rpm, screw speed up to 400 rpm, maximum pressure 200 bar, heating power 137 kW, 6 heating zones, dimensions 3535 × 900 × 500 mm. The extruder includes a melt pump, an underwater granulator with a die and a set of knives, a cooling system for a water bath, an oil unit with electric heaters for heating the granulation die, and hydraulic units for operating and locking the shears. Suitable for factories involved in compounding, PP granule production, masterbatch production, regranulation, and processing of large volumes of plastic.

Year of construction: 2025, condition: as good as new (ex-display), Air-cooled process chiller: R32 refrigerant Gjdpfx Ajf H A Eyjbmsuc Cooling capacity 72 kW at 7/12°C, internal P3 pump, internal 410 l tank, winter package down to -25°C ambient temperature for outdoor installation, includes variable-speed fans Large Dixell display with protective cover

Year of construction: 1988, condition: good (used), functionality: fully functional, machine/vehicle number: MGL 250M, DC MOTOR, GEARBOX, 256 KW – IN OPERATIONAL CONDITION. MACHINE HAS ALREADY BEEN TESTED BY US. Gujdpfx Aszc Hzlsbmsc

Condition: defective spare-parts repository (used), Year of construction: 2006, functionality: not functional, machine/vehicle number: 160091, clamping force: 2,200 kN, Title: ENGEL Victory 1350/220 Tech (2006) - Tie-barless - Incl. Original ENGEL spare parts offer! Gedpfxszc Hn Ss Abmeuc General condition: The machine was in production use until recently. It is currently being sold as "requiring repair / for spare parts" (not functional due to a defect in the internal hydraulic pump). Ideal for dealers, machine reconditioners or injection molding companies with their own maintenance department. Special advantage / bonus: We will provide the buyer with the official ENGEL repair offer (total value: approx. €20,200). This includes the exact original part numbers (OEM) for all required components (hydraulic pump combination RKP140_80, Rexroth/STAR linear systems, piston rod seals and complete wear ring sets). This will save you time in fault diagnosis and provide the perfect template for recommissioning. Technical data: Manufacturer: ENGEL (Austria) Model: Victory 1350/220 Tech Year of construction: 2006 Machine No. (Serial number): 160091 Clamping force: 220 tons (2,200 kN) Tie-barless technology: Maximum flexibility for large molds and fast setup times. Screw diameter: 60 mm (large-volume version) Control system: CC100 / CC200 Machine weight: approx. 14,200 kg Terms of sale: Sale is strictly "as is" (ex works / EXW). The buyer bears all costs for dismantling, packaging, loading and transport logistics. Inspection on site is possible after prior arrangement.

Condition: excellent (used), Year of construction: 2012, Battenfeld HM 300/1330 injection molding machine Basic information Manufacturer: Battenfeld Model: HM 300/1330 Year of manufacture: 2012 Operating hours: 65,085 h Category: Hydraulic injection molding machine Compatibility: can be equipped with an ESS (Energy Saving Systems) Clamping unit Clamping force: 3,000 kN (300 tons) Mold mounting plate dimensions (horizontal × vertical): 1020 × 1030 mm Distance between tie bars (horizontal × vertical): 710 × 630 mm Minimum mold height: 375 mm Maximum mold opening: 1175 mm Injection unit Screw diameter: 60 mm Injection volume: 913 cm³ Injection shot weight (PS): 840 g Guodpfszc Hl Rox Abmsc Maximum injection pressure: 2040 bar Dimensions and weight

Year of construction: 2007, condition: used, dimensions 1.900 x 2.131 x 3.023 ,, weight of the machine ca. ca. 2.200 kg In our assessment, the heating element welding machine is in good used condition. Technical Specifications: Compressed Air: - Max. operating pressure: 6 bar - Compressed air consumption: 0.2 Nm³/cycle at 5 bar Heating Mirror: - 2x12 WALTOW heating cartridges, Ø12.5 x 400 mm, 1000 Watts, 230 Volts - 2x PT100 thermocouples - Heat-up time to 350°C: approx. 50 min Vacuum Pump: - BECKER vacuum pump, Model VT 4.16, 550 Watts Gusdpfezbvnxex Abmjc Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: excellent (used), Year of construction: 2005, Battenfeld HM 270/1330 Injection Molding Machine Basic Information Manufacturer: Battenfeld Model: HM 270/1330 Year of Manufacture: 2005 Category: Hydraulic Injection Molding Machine Clamping Unit Clamping Force: 2,700 kN (270 tons) Mold Platen Dimensions (horizontal × vertical): 1030 × 1020 mm Distance Between Columns (horizontal × vertical): 710 × 630 mm Minimum Mold Height: 350 mm Gedpfx Abezc Efcomeuc Maximum Mold Opening: 1150 mm Injection Unit Screw Diameter: 55 mm Injection Volume: 650 cm³ Injection Shot Weight: 565 g Maximum Injection Pressure: 2040 bar Dimensions and Weight Net weight of the machine, including the control cabinet: approximately 12 tons

Condition: used, Unused Gericke TYOE 450x680 Nibbler. Unit has stainless steel body, rotor, screen frame and screen. Unit is driven by a 5.5kW motor operating at 1445rpm. through a 26.04/1 ratio gearbox. Gedpfx Abszbuchjmjuc

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 550584, clamping force: 2,500 kN, This FERROMATIK MILACRON injection molding machine, model FERROMATIK K-TEC 250s, manufactured in 04/2006, will be auctioned off, including a trio-technik conveyor belt, manufactured in 2004, and a Griwa ring feeder, manufactured in 2015, as well as a Hahn automation system, manufactured in 2011, in our online auction "Site Closure Wirthwein Friedberg GmbH & Co. KG - Machines, Tools, Workshop Equipment, etc." This and many other items from the field of injection molding technology, production & workshop equipment, temperature control units, lifting equipment, erosion machines, measuring instruments, transport & social area equipment, etc., can be found on our RESTLOS auction platform! Nameplate data: Manufacturer: Ferromatik Milacron Europe Type: K-TEC250S Machine No.: 550584 Year of manufacture: 2006 Clamping force: 2500 kN International size: 2500H-1650 Injection pressure: 1575 bar Displacement: 1039 cm³ Mains connection: 400 V, ~50 Hz Motor: 55 kW Heater: 22.7 kW Weight approx.: 16.5 t CE: 0036 Number: 0067860 Identification: M SPR / M29/INV 210125 / KOST 201023 Nameplate data: Manufacturer: trio-technik Maschinenbau GmbH Model: L-3000x1400 Machine No.: 240655-5 Year of manufacture: 06/2004 Cnr.: 31321 CE Griwa ring feeder Nameplate data: Manufacturer: griwa Anlagen- & Maschinenbau GbR Designation: Ring feeder Type: 20059 Year of manufacture: 02-2015 Connection voltage: 230 VAC / 50 Hz Connection power: less than 1 kW Control voltage: 24 VDC Compressed air: 6 bar Hahn automation system Nameplate data: Gujdezbtyljpfx Abmec Manufacturer: HAHN Automation Made in Germany Number: 20021183 Item number: 409496.10.000 Year of manufacture: 2011 Weight: 100 kg Type: PL60 T CNC/3A RMP Connection: 3/N/PE/400 V, 50 Hz Power: 5.5 kW Current: 16 A CE as shown in the pictures without any other items shown in the pictures Functionality not tested

Condition: ready for operation (used), Year of construction: 2013, clamping force: 1,500 kN, Hydraulic injection moulding machine manufactured in 2013. This Battenfeld HM150750 features a clamping force of 1500 kN, providing robust performance for various applications. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld HM150750 machine we have for sale. Contact us for further details. Guodpfezbtvmsx Abmsc • Wittmann robot (not included in the advertised machine price; available as an optional robot automation system—ask separately for pricing)

Condition: ready for operation (used), Year of construction: 2013, clamping force: 5,500 kN, screw diameter: 90 mm, Hydraulic injection moulding machine manufactured in 2013. This Negri Bossi 55000H-4250 features a screw diameter of 90 mm and a maximum clamping force of 5500 kN. It offers a real injection volume of 2600 cc and a maximum pressure on material of 1630 bar. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi 55000H-4250 machine we have for sale. Contact us for further details. • Real injection volume: 2600 cc • Real injection capacity (PS): 2365 g • Plasticification capacity (PS): 105 g/sec • Max. pressure on material: 1630 bar • Max. screw rotation speed: 175 rpm • Screw torque: 4000 Nm • Distance between tie bars: 800 × 900 mm • Platen dimensions: 1260 × 1310 mm Gusdpfxszbttfj Abmoc • Min / max mould height: 300 – 850 mm • Nozzle forward power: 134 kN • Max. opening stroke: 900 mm • Max. ejector stroke: 300 mm • Ejector force: 125 kN • Pump driving power: 55 kW • Heating power: 34 kW • Total installed power: 89 kW Additional equipment: • Sytrama robot (currently installed but not included in the advertised machine price; available separately on request)