Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 675 mm Max. daylight 1825 mm Hydraulic ejector - stroke 135 mm Ejector force 226 kN Injection unit: Screw diameter 70 mm Ls/D ratio 23 Injection pressure 2389 bar Stroke volume 1097 ccm Shot weight (PS) 998 gr. Injection rate 393 ccm/s Screw speed 218 1/min Plasticising rate max. 83 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 75 kW Installed heating capacity 36 kW Dcoln E Dsv Stbmehzsg Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,70 x 2,90 x 2,80 m Total machine weight 44000 kg Accessories: - Anti vibration pads Additional options: - 1 x air valve - 8 x pneumatic sequentional valves - Accumulator - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate - Robot interface according to EUROMAP 67

Condition: used, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 201815009051245, clamping force: 900 kN, screw diameter: 28 mm, clearance between the columns: 370 mm, column diameter: 420 mm, displacement volume: 67 cm³, injection pressure: 220 bar, injection weight: 61 g, mold height (min.): 150 mm, ejector force: 1,900 N, ejector stroke: 80 mm, opening stroke: 320 mm, total length: 4,310 mm, total width: 1,290 mm, total height: 1,920 mm, overall weight: 4,300 kg, type of input current: three-phase, pressing force: 90 t, For sale electric injection molding machine from 2018 in very good condition Dsln E Dhsv Sra Uozecg

Condition: used, Functionality: fully functional, The Rapid brand grinder is for sale; 3 axles 2 knives each which are good Impeller available Dsljr Axcben E Dhzscg

Condition: good (used), Year of construction: 2005, I will sell Remak 29.5KW. Efficient. Delnjv H Sils E Dhzscg

Condition: good (used), Copy milling machine Window router Rotox Type EKF 3 with 3 milling spindles length 800 mm Delnorwfnze E Dhzjcg width 650 mm height 1500 mm

Year of construction: 1991, Condition: ready for operation (used), machine/vehicle number: 75910016, Used mill with a screw for sprue feed, ideal for odd-shaped or long sprues. No longer needed, therefore for sale. Inspection under power is possible; please bring sprues for testing. Djljv Sm Efon E Dhzscg

Condition: used, Year of construction: 2006, No. 04356 Crosscut and miter saw GRAULE ZS 85 N-S used, year of construction 2006 Saw can be tilted and pivoted 400 volt three-phase brake motor 2.2 kW Saw blade diameter 300 mm Cutting height 85 mm Cutting length 380 mm Material contact shoulder made of steel/aluminium Original GRAULE machine stand HM circular saw blade 300 mm for aluminum and plastics Transport dimensions on pallet approx. 1200 x 800 x 1800 mm LWH Weight approx. 150 kg In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale takes place in the ACTUAL condition Technical information, description of condition, year of construction and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale Dcsln E Dhomhf Ezjzog Any warranty is excluded for used machines. The rule is "bought as seen". Terms of payment: Prices plus statutory VAT, payment before pickup or shipping Terms of delivery: ex warehouse or location

Condition: used, Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 201707012030996, clamping force: 1,200 kN, screw diameter: 80 mm, clearance between the columns: 410 mm, displacement volume: 214 cm³, injection pressure: 192 bar, injection weight: 195 g, mold height (min.): 150 mm, ejector stroke: 120 mm, opening stroke: 360 mm, plate length: 615 mm, plate width: 615 mm, total length: 5,030 mm, total width: 1,320 mm, total height: 2,030 mm, overall weight: 4,400 kg, type of input current: three-phase, pressing force: 120 t, Clamping force: 120 T Type of machine: hydraulic machine Mold platen dimension: 615x615 mm Distance between tie bars (h x v): 410x410 mm Mold opening stroke: 360 mm Max. mold height: 450 mm Djljv Sq Nuen E Dhzocg Min. mold height mold height : 150 mm Ejector stroke: 120 mm Ejector force: 33 kN Minimum mold dimension (l x w): 290x290 mm INJECTION UNIT Screw diameter: 80mm Shot size (theoretical): 214 cm3 Injection weight (PS): 195 g Injection stroke: 170mm Injection speed: 118 mm/s Injection pressure: 186 Mpa Screw speed: 325rpm Power Maximum hydraulic pressure bar Servo motor power: 15 kW Machine dimensions (l x w x h) 5.03 x 1.31 x 2.03 m Machine weight 4.4 T

Condition: used, Functionality: fully functional, Two YUDO "Bold 3" hot runner units are available for sale. The unit has 12 hot zones and a 63A plug. Spare parts are still available, and a user manual is also available for this unit. L: 150 mm W: 100 mm Dcsln E Djv Smnajhzog H: 80 mm

Condition: good (used), Year of construction: 2010, Max. heating temperature - 90°C Medium - water Power: 9.5 kW The device has: - vacuum pump - vacuum tank Dcslnjv H Shbs E Dhzeg - function of sucking the medium out of the mold

Year of construction: 2010, Condition: used, HB THERM 140 Z 2 (2010) Measurement range 0–400 °C Resolution 0.1 °C Regulation accuracy ±0.1 K Tolerance ±0.8 K Flow measurement Measuring range 0.4–40 l/min Resolution 0.1 l/min Regulation accuracy ±0.1 l/min Tolerance ±(5% of measured value + 0.1 L/min) Pressure measurement Value Unit Measuring range 0–20 bar Resolution 0.1 bar Tolerance ±5% of final value Delnov H Ad Hj E Dhzjcg Technical data O8360-CS 2023-08 25 3.2 Emission value unit Permanent sound pressure level 55 °C 3.3 Operating conditions Temperature range 5–40 °C Relative humidity* 35–85 % RH Minimum free space (→ picture) A 10 mm B 50 mm C 150 mm D 50 mm E 70 mm

Condition: excellent (used), Year of construction: 2018, Atom HS588 / 3 CE Bridge Cutting Machine Pressure 25 Tons Table dimensions: 1600mm x 500mm Hammer dimensions: 500mm x 500mm Maximum hammer stroke: 150mm Engine power 1.5kW Simple, intuitive operation using a PLC touch panel Machine like NEW, in perfect technical condition Full manufacturer's documentation for the machine Possibility of assistance in organizing transport Atom HS588 / 3 CE Bridge Cutting Machine Pressure 25 Tons Table dimensions: 1600mm x 500mm Hammer dimensions: 500mm x 500mm Maximum hammer stroke: 150mm Engine power 1.5kW Simple, intuitive operation using a PLC touch panel Machine like NEW, in perfect technical condition Full manufacturer's documentation for the machine Possibility of assistance in organizing transport Atom HS588/3 CE Brückenschneidemaschine Druck 25 Tonnen Tischabmessungen: 1600 mm x 500 mm Doln E Dhjv Skrcozecg Hammerabmessungen: 500 mm x 500 mm Maximaler Hammerhub: 150 mm Motorleistung 1.5 kW Einfache, intuitive Bedienung über ein SPS-Touchpanel Die Maschine ist wie NEU, in einwandfreiem technischen Zustand Vollständige Herstellerdokumentation zur Maschine Möglichkeit der Unterstützung bei der Organization des Transports

Condition: used, No. 04401 Dcjlnjvtf E To E Dhzjg Wing assembly station / Leaf assembly station Federhenn WORKER Used For the fitting- and seal assembly on wood- and plastic window sashes With mesh shelf for material storage Table dimensions 2500 x 1300 mm LW Pneumatic side impact and lowering Pneumatic punch Transport dimensions approx. 3300 x 2000 x 2400 mm LWH Weight approx. 1000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 201707012032351, clamping force: 1,200 kN, screw diameter: 80 mm, clearance between the columns: 410 mm, displacement volume: 214 cm³, injection pressure: 192 bar, injection weight: 195 g, mold height (min.): 150 mm, ejector stroke: 120 mm, opening stroke: 360 mm, plate length: 615 mm, plate width: 615 mm, total length: 5,030 mm, total width: 1,320 mm, total height: 2,030 mm, overall weight: 4,400 kg, type of input current: three-phase, pressing force: 120 t, Clamping force: 120 T Type of machine: hydraulic machine Mold platen dimension: 615x615 mm Distance between tie bars (h x v): 410x410 mm Mold opening stroke: 360 mm Max. mold height: 450 mm Min. mold height mold height : 150 mm Ejector stroke: 120 mm Ejector force: 33 kN Minimum mold dimension (l x w): 290x290 mm INJECTION UNIT Screw diameter: 80mm Shot size (theoretical): 214 cm3 Injection weight (PS): 195 g Injection stroke: 170mm Injection speed: 118 mm/s Injection pressure: 186 Mpa Screw speed: 325rpm Djln Ejv Sq H Ho Dhzocg Power Maximum hydraulic pressure bar Servo motor power: 15 kW Machine dimensions (l x w x h) 5.03 x 1.31 x 2.03 m Machine weight 4.4 T

Condition: used, Functionality: fully functional, The hot runner device CW 662 is a 6-way device from YUDO and is for sale, of course with a BA for the device. Djln Eov Smmcj Dhzecg

Condition: good (used), Year of construction: 2006, operating hours: 62,149 h, Functionality: fully functional, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 510 cm³, injection pressure: 1,615 bar, total length: 6,800 mm, total width: 1,800 mm, total height: 2,400 mm, overall weight: 12,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, injection moulding machine ENGELVictory 1050-220 TECH warehouse no.: 503559 manufacturer: ENGEL type: Victory 1050-220 TECH controller: CC100 year of construction: 2006 operation hours: 62149 h technical data clamping unit clamping force: 2200 kN size of mould plates h x v: 860 x 830 mm min. mould height: 300 mm max. open daylight: 1045 mm opening stroke: 755 mm ejector stroke: 180 mm ejector force: 80 kN centering diameter of moving platen: 160 mm centering diameter of fixed platen: 160 mm technical data injection unit screw diameter: 55 mm swept volume: 510 ccm injection pressure: 1615 bar screw length: 20 l/d screw stroke: 200 mm screw speed: 230 min plasticising rate: 55 g/s PS injection rate into the open: 255 g/s PS number of heating zones: 5 nozzle stroke: 350 mm Dolev Hw Tvjn E Dhzecg measures & weight measures of machine l x w x h: 6.8m x 1.8m x 2.4m total weight: 12900KG equipment included screen text german machine incl. Handling Anti vibration mounts technical data robot-system handling type: Linear manufacture: ENGEL controller: ER-HLI 61

Condition: used, Year of construction: 2007, Clamping force: 12,5 t Screw diameter: 22 mm Shot weight: 31 g Shot volume: 34 cm3 Mould height: 100 mm Ejector force: 16 max. kN Screw stroke: 90 mm Injection pressure: 2000 bar Working hours: 42504 in automatic cycle Type: Vertical Dcsln E Dhov Hxx Tezeg Drive: Hydraulic

Year of construction: 2019, Condition: new, machine/vehicle number: BI3, Tempering furnace for stress relieving and forming acrylic glass Dceln E Djb Nzycjhzog The furnace has two doors on one side and 2 narrow doors with rail system on the back. The sheets are hung there and pneumatically clamped with foot switch and released again. - The oven has a maximum temperature of 230°C and a permanent deviation around the set temperature of +/-3°C at 75°C . - The internal dimensions are approx. width 1600 x depth 2000 mm. The height of the oven in the rail system can accommodate a 1800mm high free-hanging panel. - You can see the rail system on the attached pictures. The rail system can also be mounted on the front side. It can accommodate panel thicknesses from 1.5 to 25mm and can support a maximum panel weight of 150kg. - The power can be adjusted in several steps. - Air circulation approx. 3.000 m³/h - doors can also be opened from the inside for safety reasons - Safety device which also switches off the heating in case of fan failure.

Condition: used, No. 04392 End milling machine GRAULE AKF 4/200 Used Cutter diameter max. 200 mm Spindle diameter 40 mm Spindle length 75 mm Djljrtrzhen E Dhzjcg Milling width 350 mm Milling depth 45 mm Profile height 130 mm Motor power 3 kW Machine base frame Machine CE-compliant We received 4 used cutters with the machine, but we cannot guarantee that the cutters will fit. Transport dimensions approx. 1000 x 800 x 1600 mm LWH Weight approx. 150 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 201807012051958, clamping force: 1,200 kN, screw diameter: 80 mm, clearance between the columns: 410 mm, displacement volume: 214 cm³, injection pressure: 186 bar, injection weight: 194 g, mold height (min.): 150 mm, ejector stroke: 120 mm, opening stroke: 450 mm, plate length: 615 mm, plate width: 615 mm, total length: 4,820 mm, total width: 1,320 mm, total height: 2,120 mm, overall weight: 4,400 kg, type of input current: three-phase, pressing force: 120 t, Clamping force: 120 T Type of machine: hydraulic machine Mold platen dimension: 615x615 mm Distance between tie bars (h x v): 410x410 mm Mold opening stroke: 360 mm Max. mold height: 450 mm Min. mold height mold height : 150 mm Ejector stroke: 120 mm Ejector force: 33 kN Minimum mold dimension (l x w): 290x290 mm Dsln E Dhev Sq D Eezecg INJECTION UNIT Screw diameter: 80mm Shot size (theoretical): 214 cm3 Injection weight (PS): 194 g Injection stroke: 170mm Injection speed: 118 mm/s Injection pressure: 186 Mpa Screw speed: 325rpm Power Maximum hydraulic pressure bar Servo motor power: 33 kW Machine dimensions (l x w x h) 4.82 x 1.32 x 2.12 m Machine weight 4.4 T

Condition: used, Two Günther hot runner units are for sale, one with 15 channels. Deln E Dhev Sml Sjzecg L: 470 mm W: 370 mm H: 150 mm Weighs approximately 4 kg Connector: 16 V/400 A

Condition: excellent (used), Volumetric K-Tron dosing with Ruhrwerk and auger - Suitable for powder and granulate - Screw diameter: 35 mm Dcjlnervxn Is E Dhzjg

Condition: used, No. 04338 1-spindle copy router / lock router Rotox KF 451 used The ideal machine for lock processing: Profile cylinder, handle hole and lock case on all aluminum and PVC profiles - Milling of aluminum, PVC and wooden profiles - Machining of complete lock cutouts - Milling through several profile walls Machine number: 451 7535 Technical specifications: 220/380V 6.4/3.7A 1.5kW Sale takes place in the current condition! Deln E Dhjiz Ty Eezecg Transport dimensions approx. 1200 x 1200 x 1600 mm LWH Weight approx. 300 kg In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Technical information, description of condition, year of construction and scope of delivery according to the manufacturer or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines. The rule is "bought as seen". Terms of payment: Prices plus statutory VAT, payment before pickup or shipping Terms of delivery: ex warehouse 73433 Aalen

Year of construction: 2015, Condition: reconditioned (used), New price 2015- 15200€ GWK cooling tower Dsln E Dhjdxlntjzocg Proven completely overhauled by GWK DGUV certificate available

Condition: ready for operation (used), The Deltatherm temperature control device is for sale, of course with the device's operating instructions. All spare parts are still available from the manufacturer. Quantity: 1 piece/ price per device Medium: oil Heating output: 18KW Max. temperature: 200 degrees Pump flow rate: 100l/min Discharge pressure: 3bar Dimensions, W: 400mm D: 765mm H: 1310mm Weight: 150KG Dceln Eoiw H Ubs Dhzsg