Condition: good (used), Year of construction: 1998, Ref. no.: 17507 Hersteller: DEMAG Type: ERGOtech system 800-310 Year of construction: 1998 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Bwobowgpw Eovm Dp Usl Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg

Condition: used, Krauss Maffei SE502 MC4 sequence controller- removed from KM 18 C3 - removed from running machine Bwjbvmsrr Eh Aj Dp Uel - fully functionalmanufacturer: Krauss Maffei type: SE502 spare part no.: 5 Dition: gebraucht

Condition: excellent (used), Year of construction: 2021, ENGEL DUO 17060/2700 (2021) 🔧 Technical Specifications • Clamping force: 27,000 kN • Tie bar spacing (horizontal × vertical): 2,130 × 1,750 mm • Platen size: 2,970 × 2,640 mm • Mold height (min–max): 800 – 1,900 mm • Opening stroke: 3,100 mm • Max. distance between platens: 5,090 mm • Dry cycle (Euromap 6, 6 mm stroke): 5.8 s • Max. mold weight (fixed/moving platen): 50,000 kg each 🧩 Injection & Plasticizing Unit • Screw type: S4V G18 • Screw diameter: 150 mm • Injection volume: 10,780 cm³ • Injection pressure (max): 1,620 bar • Injection speed: 87 mm/s • Plasticizing rate (barrier screw): 235 g/s • Screw speed: up to 115 rpm 🔩 Nozzle & Ejector • Nozzle stroke: 1,300 mm • Nozzle contact force: 210 kN • Ejector stroke: 400 mm Bsbswd Sywjvm Dp Ujwl • Ejector force: 385 kN ⚙️ Drive & Power • Main motors installed power: 192 kW • Reload pump motor: 16 kW • Oil reservoir capacity: 1,600 liters • Main power: 3×400V, N+PE / 50 Hz ➕ Additional Features & Configuration • T-slot platen with ejector back confirmation • Locating ring Ø 120 mm • Sprue bush “R”: 19 mm • Hydraulic corepull 2+2, air valve 1+1 • Mold heating control with 144 zones (24pin, K-type) • Valve gate interface with 36 zones (16pin DC24V) • Abrasion/corrosion-resistant screw barrel • Servo hydraulic drive • Oil maintenance system • UPS (AVR) backup unit • Robot interface EM67 • Cooling circuit: 1” inlet, 2 zones per platen (90°) • Autoclamp system for fast mold changes

Condition: ready for operation (used), Year of construction: 2006, operating hours: 77,000 h, Functionality: fully functional, clamping force: 5,000 kN, screw diameter: 100 mm, Clamping force 5000 kN Mould opening force, max. 280 kN Travel force movable platen opening 137 kN Travel force movable platen closing 136 kN Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 900 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max. daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95/48 kN Injection unit: Screw diameter 100 mm Ls/D ratio 18 Injection pressure 1411 bar Stroke volume 2411 ccm Shot weight (PS) 2194 gr. Injection rate 801 ccm/s Screw speed 189 1/min Plasticising rate max. 161 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1075 ltr. Dimensions and weights: Dimensions of the machine ca. 7,50 x 2,50 x 2,50 m Total machine weight 27090 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads - 2 x 8 fold water flow regulator Bobvjwgni Hsm Dp Uowl Additional Options: - 2 x hydr. core pull on movable plate - 2 x hydr. core pull on fix plate - Robot interface according to Euromap 12 - 16 x hotrunner controller - 1 x air valve on movable plate

Condition: used, Motor, 1FK7060-5AF71-1DU5-Z, 4 available. Motor, 1FK7100-5AF71-1AG0, 2 available. Motor, 1FW3204-1GN72-5CK0-Z, 1 available. Motor, 1FW3204-1GY72-5CK4-Z, 1 available. Motor, 1FW3204-7GN01- 4GY7-Z, 2 available. Display, 2 available. Siemens line filter for 120 kW Act, 6SL3000-0BE31-2AA0, 1 available. Siemens Simodrivo Drives, 6SN1111-0AA00-1FA0, 1 available. Siemens single motor module, 6SL3126-1TE32-0AA0, 3 available. Bwjbvm Dporbzx Re Uol Siemens single motor module, 6SL3126-1TE31-3AA3, 1 available. Siemens double motor module, 6SL3126-2TE21-0AA0, 2 available. Siemens active line module, 6SL3136-7TE31-2AA1, 2 available. Siemens sinamics sensor module SMC20, 6SL3055-0AA00-5BA1, 6 available. Siemens motor module, 6SL-3126-1TE31-3AA0, 1 available. Siemens motor module, 6SL-3126-1TE32-0AA4, 1 available. Siemens motor module, 6SL-3126-1TE21-8AA0, 2 available. Siemens control unit, 6SL-3040-0MA00-0AA1, 2 available. Siemens simodrive drives, 6SN1111-0AA00-1FA0, 1 available. Motherboard

Condition: used, Year of construction: 2004, operating hours: 63,107 h, Functionality: fully functional, machine/vehicle number: 61004849, clamping force: 125 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, injection weight: 142 g, mold height (min.): 300 mm, overall weight: 6,000 kg, Equipment: documentation/manual, We are offering our Krauss Maffei KM125-390 C2 for sale. The machine has been replaced. Until the replacement, it was in continuous operation in our production facility. If you are interested in arranging a viewing, please contact us. We may require some lead time to reconnect the machine to the power supply. If you would like a viewing without the power supply, we are happy to arrange a short appointment. Bobvm Dev Rbpvsp Uowl If you are interested, we can also send you a short video of the machine in operation.

Condition: good (used), Year of construction: 2008, Ref. no.: 171 Hersteller: ENGEL Type: VC 1050H/200W/200V(TOP4)/400 Combi-WP 6K Year of construction: 2008 Clamping unit Clamping force: 400 ton Opening width: 1008 mm Platen size (h x v): 1300 x 1460 mm Injection unit Screw diameter: 50 mm Bjbvewgpwxsm Dp Ujwl Injection volume: 422 cm³ Shot weight: 0 g Injection pressure: 2322 + 00 + + + + bar Measurements and weight Machine weight: 22000 + 6600 kg Dimensions LxWxH part 1: 5 x 2,3 x m Dimensions LxWxH part 2: 3,9 x 2,3 x m

Condition: used, Krauss Maffei SR 500 processor card for MC3F- for MC3F sequence control - removed from running machine - fully functionalmanufacturer: Krauss Maffei type: SR500/310 spare part number: 5 Dition: gebraucht Bebjrr Ehqsvm Dp Uowl

Condition: good (used), Year of construction: 2006, Model: HM 210/1000 S Bwobsu Ekbhovm Dp Uol Clamping force: 210 t Distance between tie bars: 630 x 570 mm Mould height: 300 mm Daylight max. : 1050 mm Screw diameter: 50 mm Injection pressure: 2016 bar Injection volume: 491 cm3 Shot weight: 440 g Transport parameters: weight 10000 kg, L x W x H: 5000 x 1700 x 2300 mm Controll: Unilog B4 Videos on request.

Condition: used, Year of construction: 1995, Functionality: fully functional, machine/vehicle number: 28460, clamping force: 3,500 kN, screw diameter: 55 mm, clearance between the columns: 950 mm, overall weight: 5,000 kg, pump power: 45,000 W, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, ENGEL ES1350/350 HL Injection Molding Machine with Robot – Year 1995 Specifications: - Manufacturer: ENGEL - Model: ES1350/350 HL - Year: 1995 - Clamping force: 3500 kN (350 t) - Control unit: Core pull on moving platen - Robot included: ENGEL ERC 53/2-CL (1995) Condition: Machine is fully operational and currently running in a continuous production cycle. Included: - Take-out robot - Full documentation - Electrical and hydraulic diagrams Location: Poland Bwobvmswglwbe Dp Usl

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: 22-2941, total width: 700 mm, total length: 800 mm, total height: 1,700 mm, empty load weight: 40 kg, Equipment: documentation/manual, Hello, for sale is a dispensing system for 2K liquid silicone rubber (LSR) for 20 l containers. This is a demonstration unit. A material feeder and a color dispensing unit are included. Bwjbvm Dpev T Ii Ue Uel Truck loading is guaranteed.

Condition: good (used), Year of construction: 1994, Hercules 90 tons injection press Year : 1994 Injectable volume : 139cm3 Passage between columns: 445x445 Ejection stroke 110mm Opening stroke : 380mm Min. mould thickness: 180mm Maximum thickness: 400mm Diameter of centering ring : 125 Nozzle radius : 15.5mm Ejection coupling in M16, 3 blowers, 1 programmable core, euromap interface for robot connection. Bjbjizi Irovm Dp Ujwl

Condition: good (used), Year of construction: 2008, Ref. no.: 17147 Hersteller: ENGEL Type: VC 1050H/200W/200V(TOP4)/400 Combi-WP 5K Year of construction: 2008 Clamping unit Bebvm Dewgpwrop Uswl Clamping force: 400 ton Opening stroke: 1008 mm Platen size (h x v): 1360 x 1460 mm Injection unit Screw diameter: 60 mm Injection volume: 608 cm³ Shot weight: 7 g Injection pressure: 17 + + + + bar Measurements and weight Machine weight: 22.000 + 6.600 kg Dimensions LxWxH part 1: 5 x 2,3 x m Dimensions LxWxH part 2: 3,9 x 2,3 x m

Condition: used, Year of construction: 2013, operating hours: 26,000 h, clamping force: 50 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 3,700 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Krauss Maffei Type: KM50-180AX Condition: aus laufender Produktion Operating hours: ca. 26.000 Bwsbsppigdjvm Dp Usl CLAMPING UNIT: - Clamping force: 50 t Öffnungsweg: 300 mm Mould installation height min.: 150 mm Mould installation height max.: 470 mm Tie bar distance (h x v): 410 x 360 mm Plate dimension (h x v): 510 x 460 mm Centering (fix- movingplate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Injection weight in polystyrol: 54 g Stroke volume: 59 cm³ Einspritzdruck: 2.500 bar CONTROL: MC5 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 x (Hydr. Kernzug-Aggregat) Air valves: 2 Hot runner control devices: 6 Robot interface: Euromap 67 Other equipment: Qualitätsüberwachungspacket GENERAL DATA: - Installed heating capacity: 8,1 kW Pump drive power: entfällt Total installed power: Motor + Heizung Total weight: 3.700 kg Total size L x B x H: 4,4 x 1,6 x 1,9 m

Condition: good (used), Year of construction: 1998, clamping force: 110 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 158 cm³, injection pressure: 2,429 bar, injection weight: 142 g, plate length: 770 mm, plate width: 745 mm, total length: 4,300 mm, total width: 1,500 mm, total height: 2,200 mm, overall weight: 5,800 kg, Core pull 1 without robot Bsbvmswgi Tyj Dp Uowl

Condition: used, Year of construction: 2004, Technical details: screw size: 105 mm injection shot weight in Polysterol: 4727 g/PS closing pressure: 2300 kN plate size: 2830 x 2400 mm opening stroke: 3700 mm daylight: 1100-1800 mm injection volume: 5195 ccm injection pressure max.: 2296 bar dimensions: 14,2 x 4,15 x 2,84 mm total wight: 143 t tie bars distance: 2000 x 1600 mm Robot system core pulls hot runner controller -     The machine is in a very good condition       -     Additionally complete cutters available. -     A conveyor belt and Robot Systems(Model 2012) Bebvm Dotrbcbsp Uowl *

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 4450000410, clamping force: 500 kN, screw diameter: 32 mm, column diameter: 45 mm, displacement volume: 95 cm³, injection pressure: 1,076 bar, injection weight: 69 g, mold height (min.): 250 mm, overall weight: 2,430 kg, power: 16.8 kW (22.84 HP), Equipment: documentation/manual, Dr.Boy LSR (silicone) injection molding machine, built in 2024, is being sold unused due to project cancellation. Equipment Evacuation Interface for brush control Interface for handling device (EUROMAP 67) Bjbvm Dpev R Ia Io Uswl

Condition: good (used), Year of construction: 2011, Functionality: fully functional, Federhenn's fully automated rod machining center performs all the machining required for windows and front doors in a process-optimized manner. Capacity: approximately 100 rods per 8 hours. Bwsbvmswgd Aco Dp Uel

Condition: good (used), Year of construction: 2004, Ref. no.: 17146 Hersteller: ENGEL Type: ES 750H/80W/(500V)/300HL-2F Year of construction: 2004 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Injection unit Screw diameter: 50 + 25 mm Injection volume: 393 + 49 cm³ Shot weight: 354 + 44 g Injection pressure: 1917 + 1586 bar Bwjbvm Dpswgpwlj Uol Measurements and weight Dimensions: 6,5 x 2,3 x m Machine weight: 21000 kg

Condition: used, Krauss Maffei axial piston pump AKP100 with proportional valve- removed from Krauss Maffei KM 18 C3 - removed from running machine Bobvmeltrpwj Dp Uewl - fully functionalmanufacturer: Krauss Maffei type: AKP100 spare part no.: 2 manufacturer no.: R9 R9type code: SYDFE1-2X/100R-PPA12KC3-0487-A1X0XXX-K01 (SYDFE1-20/100R-PPA12KC3-0487-A1X0XXX-K01)The number before the first slash describes the device series. For this reason, this digit of the type code on your old spare part may differ. If you have any questions, please contact us Dition: gebraucht

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Hersteller: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Bwsbswgpwfsvm Dp Uol Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg

Condition: used, Krauss Maffei IPC 5-133 for MC4 control system- removed from KM not testedmanufacturer: Krauss Maffei spare part no.: 5 Dition: gebraucht Bwebjrr Egwsvm Dp Ujl

Condition: used, Krauss Maffei SR 501 computer card for MC3F / 5 removed from KM 110-700 C1 - removed out of running machine - fully functional Bebvm Dpelwt Ecs Uswl Manufacturer: Krauss Maffei type: SR 501 spare part number: 5 Dition: gebraucht

Condition: used, Year of construction: 2008, operating hours: 37,200 h, clamping force: 160 kN, screw diameter: 40 mm, displacement volume: 251 cm³, injection pressure: 2,500 bar, overall weight: 8,200 kg, terms of delivery: FCA Pegnitz Bjbvm Dpewd Udlj Uswl delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Krauss Maffei drop-out changer, height 410 mm- height 410 mm - removed from Krauss Maffei KM 200 - removed from running machine - fully functionalmanufacturer: Krauss Maffei Dition: gebraucht Beberr Efnevm Dp Uowl